Documente Academic
Documente Profesional
Documente Cultură
d1 = d -1,200 654 P; basic minor diameter of tt:Jethread 6.3 The individual item block shall be made up...by
.tJ2 = d - 0,640 327 P; basic pitch diameter of the thread a) a letter symbol
T1 Tolerance for the distance of the gauge plane from· pipe - the letter R followed by the letter p for parallel in-
end ternal threads;
T2 Tolerance for the position of the gauge plane of ,a 1 in16 - the letter R followed by the letter c for t'iper (con-
plug gauge on internal threads. ical) internal threads;
parallel 711-Rc
Internal thread Pipealways
thread taper 7/ l-R 111/2
ISO 7/1-Rp 1/2
i/2
taper
'-.-.