Documente Academic
Documente Profesional
Documente Cultură
PVI-AEC-EVO is the low cost solution Moreover, the presence of digital Highlights
for remote monitoring of PV plants outputs allows PVI-AEC-EVO to satisfy − − An expansion bus enables easy
with all ABB devices. the need of generating impulse signals, connection of options for battery
status signals or relay outputs. backup pack or GSM/GPRS module
The modular and expandable for remote connectivity when a wired
architecture combined with the din-rail The built-in 2 x 16 characters display LAN Ethernet is missing
mounting system makes the PVI-AEC- along with the integrated Web − − Connects up to 128 ABB inverters
EVO suitable for any kind of installation User Interface, accessible via LAN using Aurora Protocol over RS485 for
in PV plants where ABB inverters and connection, makes the system to be low frequency data sampling
Stringcomb have been installed. easy configured − − A quick review of the main key
Operating as gateway the PVI-AEC- performance parameter of the plant
The communication between the PVI- EVO sends all data collected securely locally provided by WUI
AEC-EVO and all other ABB devices is and reliably to the Aurora Vision® Plant − − Removable 2GB capacity SD Card
based on the proprietary Aurora Management Platform for performance flash memory for backup data storing
Protocol while environmental data can monitoring, condition monitoring and − − Remote configuration and
be obtained by connecting analog data reporting. management capabilities, including
sensors directly to the three available firmware upgrades over the Internet
analog inputs. using Aurora Vision ® Plant Portfolio
Manager
Six digital inputs are also provided by
PVI-AEC-EVO to connect a pulse
counting meter as well as to detect
specific status inputs.
Additional highlights
−− Light version available for cost
effective residential / small
commercial installation with all ABB
string inverters (TRIO 20/27.6 kW
excluded)
− − Collects performance information
such as energy harvest, power,
voltage and inverter status
− − Built-in display enables easy
configuration of inputs, outputs, and
communications
− − Simple end-user UI using Aurora
Vision® Plant Viewer
Analog inputs
2x(0...10Vdc)/(4...20Vdc)
1x PT100/PT1000
RS-485#2 RS-485#1
Irradiance sensor
Internet
Plant Porfolio Manager
Plant Viewer
PVI-AEC-EVO - Accessories
Ambient temperature
PVI-AEC-T1000-BOX sensor with IP65 PVI-GSM/GPRS GPRS cellular module
enlosure
Convert PT-100 0 to
PVI-AEC-T100-24V 10 V (requires 24 V BATTERY PACK Backup battery pack
supply )
Supply BUS
18 - 36 Vdc Internal + 5 V / 0.5A
power supply RS232
TX
RX
RTN
Keyboard Display
RS485_1
+ T/R Relay
output
Devices - T/R optoisolated 250V / 3A
RTN
Relay 1
RS485_2
+ T/R Relay 2
3
Devices
- T/R
USB_mini
CPU
USB_type A
Output status (DO_PWM1)
Ethernet 10/100
2
Output status (DO_PWM2)
SD / MMC card
6
PT 100 / PT 1000
sensor 3
A/D
Configurable Configurable
analog input digital input
Support and service For more information please contact © Copyright 2014 ABB. All rights reserved.
ABB supports its customers with your local ABB representative or visit: Specifications subject to change without notice.