Sunteți pe pagina 1din 11

Model Tuning 5G

3,5 GHz
Request for proposal. Subcontractor

company.Nokia.com © Nokia 2019


This material, including documentation and any related computer programs, is protected by
copyright controlled by Nokia. All rights are reserved. Copying, including reproducing, storing,
adapting or translating, any or all of this material requires the prior written consent of Nokia. This
material also contains confidential information, which may not be disclosed to others without the
prior written consent of Nokia.

company.Nokia.com © Nokia 2019


Contents
1 Introduction ............................................................................................................................. 4

2 Field drive test for model tuning .......................................................................................... 4

2.1.1 Scope......................................................................................................................................... 4
2.1.2 Inputs ........................................................................................................................................ 4
2.1.3 Deliverables .............................................................................................................................. 5
2.2 Tools .......................................................................................................................................... 5
3 Model Tuning Service Description......................................................................................... 7

3.1 Model Tuning preparation (complemented in item 3) ....................................................... 7


3.1.1 Scope......................................................................................................................................... 7
3.1.2 Inputs ........................................................................................................................................ 7
3.1.3 Deliverables .............................................................................................................................. 7
3.1.4 Technical Specification ........................................................................................................... 8
3.2 Model Tuning............................................................................................................................ 8
3.2.1 Scope......................................................................................................................................... 8
3.2.2 Inputs ........................................................................................................................................ 8
3.2.3 Deliverables .............................................................................................................................. 8
3.3 Tools for Model Tuning ........................................................................................................... 8
4 Service Package ....................................................................................................................... 8

5 Share of Responsibility for Model Tuning ............................................................................ 9

6 Share of Responsibility for Field drive test for model tuning ........................................... 10

company.Nokia.com © Nokia 2019


1 Introduction
The main objective of this document is to request Nokia’s partner for proposals of complete
model tuning for the n78 Band (3,5GHz) which will be part the 5G network deployment in
Chile.

The requested service and its specifications and condition are described in the next sections
of this document.

2 Field drive test for model tuning

The purpose of Field Drive Test is to provide input for “Model tuning” Service.

Field Drive Test for Model Tuning includes setting up of test transmitter at selected test locations
and collecting measurements from the test transmissions during a period previously agreed with
Nokia. It is required at least 5 routes per model.

2.1.1 Scope
• Installation of Power Transmitter and test antenna in a location previously agreed
with Nokia.
• Antenna for model tuning procedures should be preferably omni. In case project
antennas used for model tuning, drive test should be performed taking main lobe
coverage area restriction.
• Nokia will draft drive test route, but it is responsibility of subcontractor to perform
Drive Test up to the maximum distance from irradiating system that levels the
measured signal bellow the receiver sensibility (usually -110dBm)
• Testing of the measurement equipment (TX and RX), before starting drive test,
including test report with accurate power level measurements and loss
measurements.
• Drive test planning and drive test measurement execution and collection, usually 1
working day per site location, unless another specific orientation from Nokia.
• Drive test data post-processing

2.1.2 Inputs
• Site locations for the carrier wave transmitter
• Drafts for the field drive test routes
• Testing methodology
o Transmitter with frequency defined by Nokia installed close to test antenna.

company.Nokia.com © Nokia 2019


o Test antenna would be preferably omni, unless different specific orientation
from Nokia.
o In case sectorized antenna used, drive test should be restricted to main
lobe covered area.
o Test antenna should be installed in a not obstructed place. Details and
recommendations will be informed by Nokia.
o Receiver antenna should be installed in the top outside the drive test car. All
measurements should be executed under same receiver conditions.
o Drive Test should be executed from position close to irradiating test system
up to a distance that levels signal strength bellow the receiver sensibility.

2.1.3 Deliverables
• Measurement tools verification including measurement results (TX and RX) for each
used configuration (power & loss). Equipment check form containing details of the
basic checks on the drive test equipment that shall be made at the start of each
day
• Measurement concept including method of antenna directing, use of antenna type
and down tilt if applicable (sector antenna)
• Report including accurate photos to the antenna installation (direction, height, etc)
• Log details sheet containing notes of any special events
• Scanner log file for the route in electronic format, GPS data
• Drive test route display including the distance as well as possible line of site area
indications and checking that measurements are done inside the antenna main lobe

2.2 Tools

For the purpose of the execution, subcontracting company shall provide during the model tuning
campaign at its own expense, including any license fee, all resources, tools and any equipment
that are directly or indirectly required.

Subcontracting company shall only use the tools and measurement equipment previously agreed
and approved by Nokia.

Nokia has defined the following maps, tools, test and measurement equipment that shall be
provided by subcontracting company at own expenses and shall be used by partner for the
execution of the Field Drive Test for Model Tuning:

• Transmitter Kit including:


o Antennas, cables and antenna mounting kit
o Transmitter
o Power meter

• Field measurement tool kit including:

company.Nokia.com © Nokia 2019


o Car suitable for field Drive test
o Measurement software with GPS
o Digital maps: vectors (roads, streets, etc)
o Laptop suitable for measurement SW, power supply for car
o measurement handsets or a receiver equipment approved by Nokia for
model tuning procedures
o Mobile phone for communication during the job execution
o Post-processing tool

company.Nokia.com © Nokia 2019


3 Model Tuning Service Description
Model tuning is typically done at the beginning of the project in order to define the
propagation model that will be used by the planning tool.

It is composed by 2 main parts: Model Tuning as such (Preparation Phase + Model tuning) and
Field Drive Test.

The purpose of model tuning is to increase the accuracy, thus the confidence level, of a
terrain based planning tool by tuning how the progression of the radio waves is modeled in
relation to the morphologic classification used in the digital maps. In order to obtain an
accurate propagation model, the data collected from the continuous wave measurements will
be used as a reference for tuning the propagation model variables.

The input for Model Tuning is provided by “Field drive test for model tuning” which should be
included in the complete service package offered by the Nokia’s partner as answer of this RFP.

3.1 Model Tuning preparation (complemented in item 3)

3.1.1 Scope
• Morphologic types to be tuned are
• Dense-Urbam
• Urban
• Sub-Urban
• Rural
• Find representative locations for field drive test measurements. Such locations will
be chosen to reflect most of the conditions of the populations involved in the
request. (3 sites per morphology)
• Find a suitable location for the carrier wave transmitter
• Outline the field drive test routes

3.1.2 Inputs
• Area types to be tuned.

3.1.3 Deliverables
• The model tuning & measurement concept including method of directing the
antenna properly, antenna down tilt, antenna type
• Test site locations
• Outlines for field drive test routes

company.Nokia.com © Nokia 2019


3.1.4 Technical Specification
The equipment and tools for the model tuning campaign must cover the frequency bands
assigned to the Operator.

3.2 Model Tuning

SI PRICE PER
AREA SERVICE ITEM WORKING ITEM
CODE MODEL
ND Model Tuning 0007704 Model Tuning
SI PRICE DT PER
AREA SERVICE ITEM WORKING ITEM
CODE MODEL
ND Model Tuning 0007704 Field Drive Test per measurement point
3.2.1 Scope
• Model tuning and implementation into the prediction/planning tool

3.2.2 Inputs
• Field drive test measurement results
• Number of propagation models to be created
• Definition of propagation model formula to be used

3.2.3 Deliverables
• Model tuning report

3.3 Tools for Model Tuning

• Terrain based prediction/planning tool to be defined by Nokia (options: Atoll, 9955


RNP, Asset)
• Digital maps defined by Nokia (cities and clutters). The maps must be provided by
the partner.

4 Service Package
The price for this service item (task) considers costs, risks and margins, so Nokia will not pay
anything extra that is not clear specified in this RFP (as extra, eventual, optional, etc). The answer

company.Nokia.com © Nokia 2019


to this RFP should be the unitary price per model (Field Drive Test per measurement point – Model
Tuning):

It should be taken as reference the realization of the services in Metropolitan Region.

Model Tuning report has to be available maximum one week after the drive tests are finished. No
invoice will be accepted before Model Tuning Report approval.

Partner shall present the quality assurance process. The partner must be compliant with the
personal safety procedures defined by the each country legislation and best practices.

The proposal must contain the project structure to execute the task (resources, functions, tools,
etc). Technical expertise should be proved (qualified resources).

Partner shall be flexible to manage customer changes and irregular volumes. The amount of
resources should be kept enough to attend the requirements.

Project Management and Technical Management interfaces should be located in country/project


for interactions with Nokia and operator.

5 Share of Responsibility for Model Tuning

The following table describes the Share of Responsibilities between Nokia and subcontractor.

Nokia - Nokia will be responsible for the task(s)

Subcontractor (S) - The subcontractor will be responsible for the task(s)

The following table should be edited to match the case specifics.

company.Nokia.com © Nokia 2019


Task S NOKIA
Model Tuning preparation
Definition of area types to be tuned (how many models to be created and
X
number of measurement points per model)
The model tuning & measurement concept including method of directing the
X
antenna properly, antenna down tilt, antenna type
Defined test site locations X
Outlines for field drive test routes X

Model tuning
Field drive test measurement results X
Model tuning report X

Tools:
Define Terrain based planning tool X
Provide digital terrain maps X

6 Share of Responsibility for Field drive test for


model tuning
The following table describes the Share of Responsibilities between Nokia and subcontractor.

Nokia - Nokia will be responsible for the task(s)

Subcontractor - The subcontractor will be responsible for the task(s)

Task S NOKIA
Field Drive Test for Model Tuning
Definition of site locations for the carrier wave transmitter X

company.Nokia.com © Nokia 2019


Definition of the frequency carrier to be setup for tests X
Drafts for the field drive test routes X
Testing methodology definition X
Measurement tools verification including measurement results (TX and RX)
X
for each used configuration (power & loss)
Measurement concept including method of antenna directing, use of
X
antenna type and down tilt
Report including accurate photos to the antenna direction and antenna
X
height
Equipment check form containing details of the basic checks on the drive
X
test equipment that shall be made at the start of each day
Log details sheet containing notes of any special events X
Scanner log file for the route in electronic format, GPS data X
Drive test route display including the distance as well as possible line of site
area indications and checking that measurements are done inside the X
antenna main lobe

Tools
Test transmitter, antenna, cables X
Pole e.g. tripod for antenna mounting X
Scanner with measurement recording capability and GPS X
Car X

company.Nokia.com © Nokia 2019

S-ar putea să vă placă și