Documente Academic
Documente Profesional
Documente Cultură
July 2012
nüvi 150T Quick Start Manual 190-01516-01 Rev. A Printed in Taiwan
1
Getting Started Connecting the Device to Vehicle
Power
WARNING
ee the Important Safety and Product
S WARNING
Information guide in the product box for product This product contains a lithium-ion battery.
warnings and other important information. To prevent the possibility of personal injury or
product damage caused by battery exposure
to extreme heat, remove the device from the
Setting Up Your Device vehicle when exiting or store it out of direct
When using your device for the first time, sunlight.
complete the following tasks.
1 Connect the device to vehicle power (page Notice
2). Before mounting the device, see the Important
Safety and Product Information guide for
2 Mount the device (page 2). information about laws pertaining to windshield
3 Register the device (page 4). mounting.
4 Check for updates. Charge your device as you drive before using it
• Software updates (page 4). on battery power.
• Free map update (page 4). 1 Plug the vehicle power cable ➊ into the
5 Download the full owner’s manual (page 4). USB port ➋ on the device ➌.
2 Press the suction cup ➍ to the windshield.
2 nüvi 150T Quick Start Manual
3 While pressing, flip the lever ➎ back toward About myDashboard
the windshield. You can use myDashboard to register your
device, check for software and map updates,
access product manuals and support, and more.
➌ Setting Up myDashboard
➏ 1 Connect the mini-USB cable ➊ to the mini-
➍ USB port ➋ on the device (page 2).
➊ ➋
➎
➊
4 Snap the mount ➏ onto the suction cup.
➋
5 Fit the bottom of your device into the mount.
6 Tilt your device back until it snaps into place. 2 Connect the mini-USB cable to the USB port
on your computer.
7 Plug the other end of the vehicle power
cable into a power outlet in your vehicle. 3 Go to www.garmin.com/dashboard.
8 If necessary, connect the external antenna to 4 Follow the on-screen instructions.
the vehicle power cable and secure it to the
windshield using the suction cups.