Documente Academic
Documente Profesional
Documente Cultură
Tip: This page is the default page when you open the Postprocessing work ow.
Note: You can display the De ection diagram on most results pages by selecting the De ection tool . The tool
remains depressed when the displacement is displayed.
The displacement diagram is drawn on the structure. The Node Displacements table and Beam Relative Displacement
Detail table open. See T.2 The Node Displacements Table for details on these tables.
2. (Optional) If the de ection is not exaggerated enough to clearly identify, you can change the scale:
a. On the Results ribbon tab, select the Scale tool in the Con guration group.
Tip: You can also open the Diagrams dialog by selecting the Structure tool or by right-clicking in the View area
and then selecting Structure Diagrams from the pop-up menu.
Type a value of 5 (mm per m) to clearly see the de ection due to load case 5.
c. Click Apply.
Tip: You can set the Apply Immediately option on this tab to view the scale change as you use the up/down
arrows in the Displacement eld.
d. Click OK.
3. To change the load case being displayed, select from the current Load list in the window status bar.
Tip: Alternatively, select the Structure tool in the Con guration group on the Results toolbar. The active load
case can be selected on the Load and Results tab in the Diagrams dialog.
The results displayed are for the selected load case only.
c. Select the Node tab and then check the Resultant option.
Resultant stands for the square root of sum of squares of values of X, Y and Z displacements.
5. Change the display units for displacement: The units in which displacement values are displayed in the post-
processing mode are referred to as the display units.
a. On the File ribbon tab, select Display Options on the Settings tab.
/
d. Click OK.