Documente Academic
Documente Profesional
Documente Cultură
VHP / VGF *
SUBJECT: Oil Pan Door Assemblies
* SUPERSEDES: NEW
The purpose of this bulletin is to inform the field NOTE: Individual doors may be replaced with
of new oil pan door assemblies for all VHP and new-style doors as needed. Use only new roll pin
VGF engines. bolts with new doors. Previous-style “peened”
bolts are one-time-use fasteners. Do not re-use
The new oil pan door assemblies incorporate a
them.
higher standard of casting quality and O-ring
grooves to reduce oil leakage from the O-ring
sealing surfaces. New doors can be identified by 2
the cast-in INNIO Waukesha logo on the inside 1
surface of the door (see Figure 1).
Replace the oil pan door either at the first sign of
oil leakage or at scheduled repair or overhaul.
Figure 2
1 - Previous-Style 2 - New-Style
Capscrew Capscrew
Table 1 identifies new part number supersession.
Figure 1 Table 1: Oil Pan Door Assembly Supersession
03/19/2015
Copyright © 2015, INNIO Waukesha Gas Engines, Inc. Page 1 of 2
Service Bulletin No. 6-4019
1 2 6 5
3
4
7
ITEM
PART NO. DESCRIPTION QTY
NO.
Oil Pan Door with
1 200224A 1
0.50-14 in. NPSF Hole
O-Ring, 0.38 x 0.62 x
2* 304721 2
0.12 in. (Viton)
Washer, 0.44 x 0.88 x
3 B2767 2
0.25 in.
Oil Pan Door
4 28766A 2
Capscrew
5 153122J Oil Pan Door Clamp 1
6 28767 Square Nut, 0.438-14 in. 2
7 26533 Roll Pin, 0.12 x 0.88 in. 1
03/19/2015
Copyright © 2015, INNIO Waukesha Gas Engines, Inc. Page 2 of 2