Documente Academic
Documente Profesional
Documente Cultură
IDENTIFICATION REFERENCES
AL N C
TECHNICAL CHARACTERISTICS
N
P + P
N N
P 6
7 5
10
8 4
9 3
220
® ®
24 110 10 2
0 11 1
0 RELAY 1
1 BLUE BLUE
2
38 38 13 70
11 1
10 2
ALNC ALN2
9 3
RELAY 2
8 4
RELAY 1
7 5
6
24V-110V-220V
POWER SUPPLY
For a correct fixing of the AECO units it is recommended to use socket B8 an B11 with fixing spring MF. (page 102)
®
98
CATALOGO 2002 INGLESE 22-04-2002 17:12 Pagina 99
PROGRAMMABLE FUNCTIONS
1) DELAY
The range of delay is from 0,03 seconds and 512 seconds (see table A) dis-
tribuited on 9 selectable scales via a dip switch mounted on the front. The
selected scale can be adjusted by means of a potentiometer on a graduated
scale from 0,05 to 1. It is possible by summing the two scales to obtain full
scale values which are different to the standard. This is obtained by placing the
switch with the chosen values in the ON position (e.g. pos. 1 an 2 switch ON
corresponds to a full scale of 640 seconds).
2) TYPE OF FUNCTION AND SENSOR
For this function it is necessary to simultaneously programme the dip switch-
es of position 10 - 11 - 12. Following table B it is possible to programme the
instrument with an on delay (TE) or off delay (TD) depending on the sensor
NAMUR, NPN or PNP.
Furthermore it is possible to programme these functions with relay on load
(ON) and off load (OFF).
ON NPN TE OFF ON ON
1
NPN TD ON ON OFF 2
3
4
11
12
ON OFF
WIRING DIAGRAM
POWER SUPPLIES
ALTP
DELAYED PROGRAMMABLE
POWER SUPPLY AMPLIFIER
1 2 3 7 4 5 6 8 9 10 11
÷12V
-OV
INPUT
0
38 13 70
RELAY
24
5A-220V
110
220
NAMUR AMPLIFIED
SENSOR SENSOR
For a correct fixing of the AECO units it is recommended to use socket B8 an B11 with fixing spring MF. (page 102)
99