Documente Academic
Documente Profesional
Documente Cultură
, Ltd
8/F., Xiamen Mail Processing Centre, No.275 Lujiang Road , Xiamen,China
Published by Service Dept.
Tel:+86-592-2389080 Fax:+86-592-2389089 298-6404-00 MAR. 2007P
Clarion Co., Ltd.
Printed in P.R.C.
50 Kamitoda , Toda-shi, Saitama 335-8511 Japan
Service Manual
CD/USB/MP3/WMA/AAC Receiver
with CeNET Control
Model
(PE-2899B-A for U.S.A)
Model
(PE-2899K-A/B for Other Countries)
(DXZ775USB)
DXZ775USB/DXZ776USB
-1-
* Use only compact discs bearing the or mark. To engineers in charge of repair or
Some CDs recorded in CD-R/CD-RW mode may not be usable.
inspection of our products.
* Windows Media , and the Windows logo are trademarks, or re-
gistered trademarks of Microsoft Corporation in the United States
Before repair or inspection, make sure to follow the
and/or other countries. instructions so that customers and Engineers in charge
* WMA is the abbreviation of Windows Media Audio, an audio file of repair or inspection can avoid suffering any risk or
format developed by Microsoft Corporation. injury.
* This product includes technology owned by Microsoft Corporation 1. Use specified parts.
and cannot be used or distributed without a license from MSLGP. The system uses parts with special safety features against fire
* As for this model, the tuner of the DSP type is used.When you and voltage. Use only parts with equivalent characteristics
when replacing them.
exchange it due to the tuner pack(BL1:880-2091E) trouble, it is
The use of unspecified parts shall be regarded as remodeling
necessary to adjust for S-meter etc.Special JIG is necessary for
for which we shall not be liable. The onus of product liability
an accurate adjustment.The procedure document for the exclusive
(PL) shall not be our responsibility in cases where an accident
use jig is appended to it. or failure is as a result of unspecified parts being used.
* This DSP IC SAF7730HN219A(051-6706-40) of main PWB is ex- 2. Place the parts and wiring back in their original positions after
posed die soldering pad type. The middle of this IC package is so- replacement or re-wiring.
ldered with the main PWB, and it cannot remove in an ordinary s- For proper circuit construction, use of insulation tubes, bond-
oldering iron.Please use special removal JIG at the time of IC exc- ing, gaps to PWB, etc, is involved. The wiring connection and
routing to the PWB are specially planned using clamps to keep
hange.
away from heated and high voltage parts. Ensure that they are
* This unit is compatible with USB 1.1/2.0 with maximum data tran-
placed back in their original positions after repair or inspec-
sfer rates of 12 Mbps.USB memory devices that can be played by
tion.
connecting to the unit's USB connector are limited to those recog-
If extended damage is caused due to negligence during re-
nized as "USB mass storage class devices"; operation is not gua-
pair, the legal responsibility shall be with the repairing com-
ranteed with all USB memory devices.
pany.
* To prevent the accidental loss of data, always back up important 3. Check for safety after repair.
data on your computer. Check that the screws, parts and wires are put back securely
* This unit does not support connections to a computer.In addition, in their original position after repair. Ensure for safety reasons
connections made through a USB hub device are also not there is no possibility of secondary ploblems around the re-
supported. paired spots.
* Do not connect an iPod to the USB connector, since playback and If extended damage is caused due to negligence of repair, the
legal responsibility shall be with the repairing company.
controls may not function properly.
4. Caution in removal and making wiring connection to the parts
* Insert and remove a USB memory device only when the device is
for the automobile.
not being accessed. Connecting or disconnecting the device at the Disconnect the battery terminal after turning the ignition key
following times may result in the loss of data: off. If wrong wiring connections are made with the battery con-
- If the USB memory device is removed or power is disconnected nected, a short circuit and/or fire may occur. If extensive dam-
during writing to the device. age is caused due to negligence of repair, the legal responsi-
- When the device is subjected to static electricity or electric noise. bility shall be with the repairing company.
* iPod is for legal or rightholder-authorized copying only. Don't st- 5. Cautions in soldering
Please do not spread liquid flux in soldering.
eal music. iPod is a trademark of Apple Computer, Inc., registered
Please do not wash the soldering point after soldering.
in the U.S and other countries.
6. Cautions in soldering for chip capacitors
Please solder the chip capacitors after pre-heating for replace-
COMPONENTS ment because they are very weak to heat.
PE-2899B-A/PE-2899K-A/B Please do not heat the chip capacitors with a soldering iron
1. Source unit 1 directly.
2. Remote control unit RCB-176-200 1 7. Cautions in handling for chip parts.
3. Battery(CR2025) 1 Do not reuse removed chips even when no abnormality is ob-
4. Mounting bracket 300-8088-00 1 served in their appearance. Always replace them with new
5. Mounting bracket 300-4976-00 1 ones. (The chip parts include resistors, capacitors, diodes, tran-
6. DCP case 335-6035-04 1 sistors, etc).
7. Escutcheon(OUT-ES) 370-6226-02 1 Please make an operation test after replacement.
8. Extension lead 854-6433-50 1 8. Cautions in handling flexible PWB
9. RCA PIN CORD 855-5520-56 1 Before working with a soldering iron, make sure that the iron
10. Parts bag 1 tip temperature is around 270 . Take care not to apply the
10-1. Removal key 331-2497-00 2 iron tip repeatedly(more than three times)to the same patterns.
10-2. Part screw(M1.7x6)(PE-2899B-A) 716-0872-61 1 Also take care not to apply the tip with force.
10-3. Screw(M5x8) 716-0496-51 1 9. Turn the unit OFF during disassembly and parts replacement.
10-4. Rubber part 345-3799-20 8 Recheck all work before you apply power to the unit.
DXZ775USB/DXZ776USB
-2-
10. Cautions in checking that the optical pickup lights up. 11-3. Cleaning the lens
The laser is focused on the disc reflection surface through the Dust on the optical lens affects performance.
lens of the optical pickup. When checking that the laser opti- To clean the lens, apply a small amount of isopropyl alcohol to
cal diode lights up, keep your eyes more than 30cms away lens paper and wipe the lens gently.
from the lens. Prolonged viewing of the laser within 30cms
may damage your eyesight. CAUTION
11. Cautions in handling the optical pickup Use of controls, adjustments, or performance of procedures other
The laser diode of the optical pickup can be damaged by elec- than those specified herein, may result in hazardous radiation ex-
trostatic charge caused by your clothes and body. Make sure posure.
to avoid electrostatic charges on your clothes or body, or dis- The compact disc player should not be adjusted or repaired by
charge static electricity before handling the optical pickup. anyone except properly qualified service personnel.
11-1. Laser diode
The laser diode terminals are shorted for transportation in or-
der to prevent electrostatic damage. After replacement, open
the shorted circuit. When removing the pickup from the mecha-
nism, short the terminals by soldering them to prevent this
damage.
11-2. Actuator
The actuator has a powerful magnetic circuit. If a magnetic
material is put close to it. Its characteristics will change. En-
sure that no foreign substances enter through the ventilation
Bottom view of DXZ775USB
slots in the cover.
ERROR DISPLAYS
If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem.
Error Display Cause Measure
ERROR 2 A CD is caught inside the CD deck and is not This is a failure of CD deck's mechanism.
ejected.
CD/MP3/
ERROR 3 A CD cannot be played due to scratches, etc. Replace with a non-scratched, non-warped disc.
WMA/AAC
ERROR 6 A CD is loaded upside-down inside the CD deck Eject the disc then reload it properly.
and does not play.
ERROR 2 A CD inside the CD changer is not loaded. This is a failure of CD changer’s mechanism.
CD ERROR 3 A CD inside the CD changer cannot be played Replace with a non-scratched, non-warped disc.
changer due to scratches, etc.
ERROR 6 A CD inside the CD changer cannot be played Eject the disc then reload it properly.
because it is loaded upside-down.
ERROR 2 A DISC inside the DVD changer cannot be played. This is a failure of DVD mechanism.
ERROR 3 A DISC cannot be played due to scratches, etc. Retry or replace with a non-scratched, non-warped-
disc.
DVD
changer ERROR 6 A DISC inside the DVD changer cannot be Eject the disc then reload it properly.
played because it is loaded upside-down.
ERROR R Region code error. Eject the disc and replace correct region code disc.
ERROR 1 A communication error occurs between the iPod Disconnect the iPod, then connect it again.
and the iPod CeNET Controller.
iPod
NO IPOD There is no iPod connected. Please connect the iPod.
NO FILE USB memory device contains no audio files. Insert USB memory device containing audio files.
USB
DSP ERROR USB connector is shortcircuited or USB memory Disconnect USB memory device, then hold [SRC]
device is overloaded. button depressed to turn power OFF. Then press
[SRC] button once again to turn power ON.
If an error display other than the ones described above appears, press the reset button.
DXZ775USB/DXZ776USB
-3-
TROUBLESHOOTING
Problem Cause Measure
Power does not turn on. Fuse is blown. Replace with a fuse of the same amperage as the old fuse.
(No sound is produced.)
Incorrect wiring. Read the attached "Installation/Wire connection Guide" once again
and wire properly.
No sound output when Power antenna lead is shorted 1. Turn the unit off.
operating the unit with to ground or excessive current 2. Remove all wires attached to the power antenna lead. Check
amplifiers or power is required for remote-on the each wire for a possible short to ground using an ohm meter.
antenna attached. amplifiers or power antenna. 3.Turn the unit back on.
4. Reconnect each amplifier remote wire to the power antenna lead
one by one. If the amplifiers turn off before all wires are attached,
use an external relay to provide remote-on voltage
(excessive current required).
Nothing happens when The microprocessor has Turn off the power, then press the Reset button
General
buttons are pressed. malfunctioned due to noise, [RELEASE] button and remove the DCP.
etc. Press the reset button for about 2 seconds
with a thin rod.
Display is not accurate.
DCP or main unit connectors Wipe the dirt off with a soft cloth moistened with cleaning alcohol.
are dirty.
No sound heard. The speaker protection circuit is Turn down sound volume. Function can also be restored by turning
operating. the power off and on again.
(Speaker volume is reduced automatically when the speaker prote-
ction circuit operates).
No sound heard. MP3/WMA/AAC files are absent Write MP3/WMA/AAC files onto the disc properly.
in a disc.
Sound skips or is noisy. Compact disc is dirty. Clean the compact disc with a soft cloth.
Compact disc is heavily Replace with a compact disc with no scratches.
scratched or warped.
Sound is cut or skipped. MP3/WMA/AAC files are not Use MP3/WMA/AAC files encoded properly.
Noise is generated or noise encoded properly.
is mixed with sound.
Sound is bad directly after Water droplets may form on Let dry for about 1 hour with the power on.
power is turned on. the internal lens when the car
is parked in a humid place.
Wrong filename File system is not correct. Use ISO9660 level 1, 2 or JOLIET or Romeo or APPLE ISO file
system.
No sound heard. The USB memory device Record MP3/WMA/AAC files properly to the USB memory device.
contains no MP3/WMA/AAC files.
The files are not proper MP3 Use only properly encoded MP3/WMA/AAC files.
/WMA/ACC format.
Connectors are loose. Disconnect the USB memory device and reconnect securely.
USB
Sound is interrupted or has The MP3/WMA/AAC files are Use only properly encoded MP3/WMA/AAC files.
noise. improperly encoded.
USB memory device isn't The USB memory device is Disconnect the USB memory device and reconnect. If the device is
recognized. damaged. still not recognized, try replacing with a different USB memory
device.
Connectors are loose.
Can't insert USB memory The USB memory devices has Try reversing the connection direction of the USB device (usually
device. been inserted improperly. the brand name surface should be facing left).
The USB connector is broken. Replace with a new USB memory device.
DXZ775USB/DXZ776USB
-4-
RECEPT
RECEPT
Main section
Q
BLOCK DIAGRAM
-5-
FJ
-TR
IC3
IC1
MECH PWB
M30876MJB
CONTROL
DXZ775USB/DXZ776USB
ADJUSTMENTS
ADJUSTMENT OF BUS-TUNER : 880-2091E PRN data writing
This adjustment sets some values of the tuner.The adjustment 1) Click [prn FILE LOAD], and select PRN-FILE.
data is written in EEPROM(IC605).The special jig and software 2) Click [EEPROM WRITE], the PRN-data is write in EEPROM
are necessary for this adjustment. of the unit.
* CeNET-analyzer
* Personal computer Adjustments
*SG 1. FM S-meter
* Adjustment-Software:Adjustment system for DSP N217 1) Set SG output to 65dBuV.(FM)
with CeNET(Ver.Y4-S024-103-20060623) 2) Click [Adjustment] of "FM S-Meter".(Wait until the value stops.)
Preparation 2. FM IF-Count
1. Installation of software 1) Click [Adjustment] under "FM IF-COUNT".(The FM-IF-
Execute the windows installer package in the set-folde Offset data of EEPRON is effective.)
of the writing E2P. 2) Click [Check], and confirm the display is within +/-500.0.
EXPLANATION OF IC
Main section pin 38 : BOLERO-RESET : O : The reset signal output of the BOLERO.
052-3977-01 M30873MHB-704GP Main System controller pin 39 : FLASH-EPM : IN : Ground.
pin 40 : NC : IN : Not in use.
1.Terminal Description
pin 41 : NC : IN : Not in use.
pin 1 : NC : IN : Ground.
pin 42 : NC : IN : Not in use.
pin 2 : OEM-REMOCON : IN : The steering remote controller signal input.
pin 43 : CATS-LED : O : CATS LED drive output.
pin 3 : IE-BUS-TX : O : IE Bus serial data output.
pin 44 : FLASH-CE : IN : The serial data output for the flash memory.
pin 4 : IE-BUS-RX : IN : IE Bus serial data input.
pin 45 : NC : O : Not in use.
pin 5 : AUTO-ANT : O : Motor antenna signal output.
pin 46 : NC : IN : Not in use.
pin 6 : BYTE(GND) : IN : Connect to VSS.
pin 47 : NC : IN : Not in use.
pin 7 : CNVSS : IN : Connect to VSS.
pin 48 : NC : IN : Not in use.
(with internal pull-down resistor)
pin 49 : NC : IN : Not in use.
pin 8 : XCIN : IN : The crystal resonator for sub-clock.
pin 50 : BOLERO-REQ : IN : The request signal input to the BOLERO.
pin 9 : XCOUT : IN : The crystal resonator for sub-clock.
pin 51 : AMP-MUTE : O : Muting signal output to the
pin 10 : RESET : IN : The reset signal input.
Audio Power Amplifier.
pin 11 : X-OUT : O : The resonator for main clock.
pin 52 : NC : I/O : Not in use.
pin 12 : GND : - : Ground.
pin 53 : NC : O : Not in use.
pin 13 : X-IN : IN : The resonator for main clock.
pin 54 : NC : O : Not in use.
pin 14 : VCC1 : - : Positive power supply.
pin 55 : DSP-RESET : O : Reset signal output to the DSP IC.
pin 15 : VCC : - : Positive power supply.
pin 56 : DSP-INIT : IN : The initial finished signal input from the
pin 16 : ACC-DET : IN : ACC detection signal input.
Radio-Audio-DSP.
pin 17 : B/U-DET1 : IN : Backup detection signal input.
pin 57 : AMP-STBY : O : ON signal output to the internal Amplifier.
pin 18 : ILL-DET : IN : The illumination detection signal input.
pin 58 : EXT-AMP-REM : O : ON signal output to the external Amplifier.
pin 19 : OFFSET-DET : IN : The emergency signal input from the power IC.
pin 59 : NOISE-CUT : O : The cut of contral signal output to the noise.
pin 20 : E2P-DO : O : The serial data output to the E2PROM.
pin 60 : VCC : - : Positive power supply.
pin 21 : E2P-SCK : O : The clock pulse output to the E2PROM.
pin 61 : NC : IN : Ground.
pin 22 : E2P-DI : IN : The serial data output to the E2PROM.
pin 62 : GND : - : Ground.
pin 23 : E2P-CS : O : E2PROM chip selection signal output.
pin 63 : AM/FM-ON : O : The 8.5V power supply ON signal output.
pin 24 : NC : IN : Ground.
pin 64 : AM/FM-5V-ON : O : The 5V power supply ON signal output.
pin 25 : NC : IN : Ground.
pin 65 : DSP2-INIT : O : The initial reset signal output to DSP2.
pin 26 : NC : IN : Ground.
pin 66 : DSP2-RESET : O : The reset pulse output to DSP2.
pin 27 : TUN-SCL : O : The clock pulse output to the BUS tunner.
pin 67 : DSP2-REQ : O : The request signal output to DSP2.
pin 28 : TUN-SDA : I/O : The serial data input/output to the BUS tunner
pin 68 : DSP2-SCK : O : The clock pulse output to DSP2.
pin 29 : FLASH TX : O : The flash serial data output.
pin 69 : DSP2-SO : O : The serial data output to DSP2.
pin 30 : FLASH RX : IN : The flash serial data input.
pin 70 : DSP2-RDY : IN : The ready signal input to DSP2.
pin 31 : FLASH-SCL : IN : Ground.
pin 71 : KEY-INT : IN : Key interrupting signal input.
pin 32 : FLASH-BUSY : O : Not in use.
pin 72 : B/U-DET2 : IN : Backup detection signal input.
pin 33 : BOLERO-SDA : I/O : The serial data input/output to the BOLERO.
pin 73 : BOLERO-ACC : O : The ACC signal of the BOLERO.
pin 34 : BOLERO-SCL : O : The clock pulse output when to the BOLERO.
pin 74 : PHONE-IN : IN : The telephone interrupt signal input.
pin 35 : Z-MUTE-CUT : O : The cut of contral signal output to the MUTE.
pin 75 : AMP-REM-DET : IN : Remote controller wire short detection.
(CD:H:no cut; out of CD:L:cut)
pin 76 : MOTOR+ : O : The control signal output to the motor.
pin 36 : A-MUTE(TEST) : IN : Test pin.
pin 77 : MOTOR- : O : The control signal output to the motor.
pin 37 : EMPH : O : Test pin.
pin 78 : NC : IN : Ground.
DXZ775USB/DXZ776USB
-6-
pin 79 : CLOSE-POSI : IN : The close position detect signal input. pin 49 : RESETN : - : General reset of chip (active low).
pin 80 : OPEN-POSI : IN : The open position detect signal input. pin 50 : TEST1 : - : Test pin1 reserved for digital testing.
pin 81 : ILL-DET-OUT : O : Illumination ON signal output. pin 51 : BCK_IN1 : IN : IIS source 1 Bit Clock input.
pin 82 : DISP-REM : O : The power supply control signal output for the pin 52 : WS_IN1 : IN : IIS source 1 Word Select input.
displayer. pin 53 : SD_IN1 : IN : IIS source 1 Data input.
pin 83 : NC : IN : Ground. pin 54 : VDDD2 : - : 1.8V positive supply.
pin 84 : DD-REM : O : The control signal output for DC_DC_Converte pin 55 : VSSS2 : - : Ground supply.
pin 85 : DD-F-SW : O : The frequency control signal output pin 56 : NC : I/O : Not in use.
for DC_DC_Converter. pin 57 : NC : O : Not in use.
pin 86 : MOTOR-REM : O : Motor power ON signal output. pin 58 : NC : I/O : Not in use.
pin 87 : KEY-ILL-REM : O : The key illumination ON signal output. pin 59 : RDS_DATA2 : O : Radio Data System data output 2.
pin 88 : DISP-RESET : O : Display reset signal output. pin 60 : VDD_MEM1 : - : 1.8V positive supply (for memories only).
pin 89 : KEY-A/D : IN : The input terminal of the internal ADC pin 61 : VSSS5 : - : Ground supply (for memories).
for key judgment. pin 62 : BCK_IN2 : IN : IIS source 2 Bit Clock input.
pin 90 : SYS-ACC : O : ACC detection signal input. pin 63 : WS_IN2 : IN : IIS source 2 Word Select input.
pin 91 : SYS-MUTE : O : System muting signal output. pin 64 : SD_IN2 : IN : IIS source 2 Data input.
pin 92 : INT1 : IN : The destination setting input. pin 65 : BCK_IN3 : IN : IIS source 3 Bit Clock input.
pin 93 : INT2 : IN : The destination setting input. pin 66 : WS_IN3 : IN : IIS source 3 Word Select input.
pin 94 : AVSS(GND) : - : Negative voltage supply for A/D converter. pin 67 : SD_IN3 : IN : IIS source 3 Data input.
pin 95 : TEST : O : Test pin. pin 68 : VSSQ1 : - : Ground supply (peripheral cells only).
pin 96 : VREF : IN : Reference vlotage input for A/D converter . pin 69 : VDDQ2 : - : Positive supply (peripheral cells only).
pin 97 : AVDD : - : Positive voltage supply for A/D converter. pin 70 : ADSP_IOF5 : - : Audio DSP general purpose I/O flag 5.
pin 98 : DSP-SCL : O : I2BUS serial clock output pin 71 : ADSP_IOF6 : - : Audio/SRC DSP general purpose I/O flag 6.
for the Radio-Audio-DSP. pin 72 : BCK_IN4 : IN : IIS source 4 Bit Clock input.
pin 99 : DSP-SDA : I/O : I2BUS serial data input/output pin 73 : WS_IN4 : IN : IIS source 4 Word Select input.
for the Radio-Audio-DSP. pin 74 : SD_IN4 : IN : IIS source 4 Data input.
pin100 : NC : IN : Ground. pin 75 : SD_HOST_OUT1: O : Host IIS 1 Data output.
pin 76 : SD_HOST_OUT2 : O : Host IIS 2 Data output.
051-6706-40 SAF7730HN219A Dual IF Car Radio and Audio DSP pin 77 : SD_HOST_OUT3 : O : Host IIS 3 Data output.
pin 78 : SD_HOST_OUT4 : O : Host IIS 4 Data output.
1.Terminal Description pin 79 : WS_HOST : I/O : Host IIS Word Select output/input.
pin 1 : VDDA_1V8 : - : 1.8V supply for IFADC and Audio ADCs. pin 80 : BCK_HOST : I/O : Host IIS Bit Clock output/input.
pin 2 : AUX_R : IN : Right channel of auxiliary input. pin 81 : SD_HOST_IN1 : IN : Host IIS 1 Data input.
pin 3 : AUX_R_GND : IN : Right common mode reference auxiliary input. pin 82 : SD_HOST_IN2 : IN : Host IIS 2 Data input.
pin 4 : AUX_L_GND : IN : Left common mode reference auxiliary input. pin 83 : SD_HOST_IN3 : IN : Host IIS 3 Data input.
pin 5 : AUX_L : IN : Left channel of auxiliary input. pin 84 : SD_HOST_IN4 : IN : Host IIS 4 Data input.
pin 6 : TAPE_R : IN : Right channel of tape input. pin 85 : SD_HOST_IN5 : IN : Host IIS 5 Data input.
pin 7 : TAPE_L : IN : Left channel of tape input. pin 86 : VSSQ2 : - : Ground supply (peripheral cells only).
pin 8 : VADCP : - : Positive reference voltage for Audio ADCs. pin 87 : VDDQ3 : - : Positive supply (peripheral cells only).
pin 9 : VDD_ADC : - : 3.3V supply for audio ADCs. pin 88 : ADSP_IOF7 : I/O : Audio/SRC DSP general purpose I/O flag 7.
pin 10 : VADCN : - : Ground reference for audio ADCs. pin 89 : ADSP_IOF8 : I/O : Audio/SRC DSP general purpose I/O flag 8.
pin 11 : VREFAD : - : Common mode reference voltage ADCs. pin 90 : ADSP_IOF9 : I/O : Audio/SRC DSP general purpose I/O flag 9.
pin 12 : CD_R : IN : Right channel of CD input. pin 91 : ADSP_IOF10 : I/O : Audio/SRC DSP general purpose I/O flag 10.
pin 13 : CD_R_GND : IN : Right common mode reference CD input. pin 92 : ADSP_IOF11 : I/O : Audio/SRC DSP general purpose I/O flag 11.
pin 14 : CD_L_GND : IN : Left common mode reference CD input. pin 93 : ADSP_IOF12 : I/O : Audio/SRC DSP general purpose I/O flag 12.
pin 15 : CD_L : IN : Right channel of CD input. pin 94 : VDDD3 : - : 1.8V positive supply.
pin 16 : PHONE_IN : IN : Audio phone input. pin 95 : VSSS3 : IN : Ground supply.
pin 17 : PHONE_GND : IN : Common reference audio phone input. pin 96 : TDSP_IOF1 : I/O : Tuner DSP general purpose I/O flag 1.
pin 18 : NAV : IN : Audio navigation input. pin 97 : TDSP_IOF2 : I/O : Tuner DSP general purpose I/O flag 2.
pin 19 : NAV_GND : IN : Common reference audio navigation input. pin 98 : TDSP_IOF3 : I/O : Tuner DSP general purpose I/O flag 3.
pin 20 : VDDD1 : - : 1.8V positive supply. pin 99 : TDSP_IOF4 : I/O : Tuner DSP general purpose I/O flag 4.
pin 21 : VSSS1 : - : Ground supply. pin100 : TDSP_IOF5 : I/O : Tuner DSP general purpose I/O flag 5.
pin 22 : TRSTN : - : Test reset, active low. pin101 : TDSP_IOF6 : I/O : Tuner DSP general purpose I/O flag 6.
pin 23 : TCK : - : Test clock. pin102 : TDSP_IOF7 : I/O : Tuner DSP general purpose I/O flag 7.
pin 24 : TDO : O : Test control data output. pin103 : TDSP_IOF8 : I/O : Tuner DSP general purpose I/O flag 8.
pin 25 : TDI : IN : Test control data input. pin104 : VSSQ3 : - : Ground supply (peripheral cells only).
pin 26 : TMS : - : Test mode select. pin105 : VDDQ4 : - : Positive supply (peripheral cells only).
pin 27 : A0 : - : Slave sub-address I2C selection. pin106 : TDSP_IOF9 : I/O : Tuner DSP general purpose I/O flag 9.
pin 28 : SCL : IN : Serial clock input I2C bus. pin107 : TDSP_IOF10 : I/O : Tuner DSP general purpose I/O flag 10.
pin 29 : SDA : I/O : Serial data input / output I2C bus. pin108 : AGC1_1 : O : LSB Gain control output 1 to DICE1.
pin 30 : GAPREG : - : Decoupling for regultator bandgap voltage. pin109 : AGC1_2 : O : MSB Gain control output 2 to DICE1.
pin 31 : CONREG : O : Control output for external PMOS transistor. pin110 : AGC2_1 : O : LSB Gain control output 1 to DICE2.
pin 32 : FEBREG : IN : Feedback input monitoring the 1.8V. pin111 : AGC2_2 : O : MSB Gain control output 2 to DICE2.
pin 33 : VDD_REG : - : 3.3V supply for regulator. pin112 : TDSP_IOF11 : I/O : Tuner DSP general purpose I/O flag 11.
pin 34 : SPDIF_IN1 : IN : Spdif input1. pin113 : TDSP_IOF12 : I/O : Tuner DSP general purpose I/O flag 12.
pin 35 : VSS_SPDIF : IN : Ground supply for spdif input. pin114 : ADSP_IOF4 : I/O : Audio DSP general purpose I/O flag 4
pin 36 : SPDIF_IN2 : IN : Spdif input2. (e.g. IBOC_BLEND).
pin 37 : VDD_SPDIF : IN : 3.3V supply for spdif input. pin115 : SD_IBOC_OUT_I : O : Serial data output IBOC I-signal.
pin 38 : DAC_RR : O : Audio output for Rear-right speaker. pin116 : SD_IBOC_OUT_Q : O : Serial data output IBOC Q-signal.
pin 39 : DAC_RL : O : Audio output for Rear_left speaker. pin117 : WS_IBOC_OUT : O : IBOC Word Select output.
pin 40 : VDACP : - : Positive reference voltage for audio DACs. pin118 : BCK_IBOC_ : O : IBOC Bit Clock output.
pin 41 : VDACN : - : Ground reference voltage for audio DACs. pin119 : RESERVED_ : - : Reserved.
pin 42 : VDD_DAC : - : 3.3V supply for audio DACs. pin120 : RESERVED_ : - : Reserved.
pin 43 : DAC_FR : O : Audio output for Front-right speaker. pin121 : VSSS6 : - : Ground supply (for memories).
pin 44 : DAC_FL : O : Audio output for Front-left speaker. pin122 : VDD_MEM2 : - : 1.8V positive supply (for memories only).
pin 45 : DAC_SUBW : O : Audio output for subwoofer. pin123 : SCL_DICE : I/O : Serial clock output I2C bus to the I2C clock
pin 46 : DAC_CENTER : O : Audio output for center speaker. input of the DICE.
pin 47 : VDDQ1 : - : Positive supply (peripheral cells only). pin124 : SDA_DICE : I/O : Serial data input/output I2C bus to the data
pin 48 : FS_SYS : I/O : FS system clock in/output. input of the DICE.
DXZ775USB/DXZ776USB
-7-
pin125 : VDDD4 : - : 1.8V positive supply. 051-6078-90 BA6285AFP Single Motor Driver
pin126 : VSSS4 : - : Ground supply.
19 Rev in
For in
pin127 : DICE2_CLK : O : 100 kHz clock current output reference to DICE2.
Vmot
20 Vref
P.S.
Vcc
24 n.c.
23 n.c.
22 n.c.
21 n.c.
n.c.
n.c.
pin128 : DICE2_CLKN : O : 100 kHz clock not current output reference to
18
17
16
15
14
13
DICE2.
pin129 : VSSQ4 : - : Ground supply (peripheral cells only).
pin130 : VSS_OSC : - : Ground supply for oscillator and PLLs. Control
pin131 : OSC_IN : IN : Crystal oscillator input.
pin132 : OSC_OUT : O : Crystal oscillator output.
pin133 : VDD_OSC : - : 1.8V supply for oscillator and PLLs.
pin134 : KAGC1 : O : Keyed AGC DAC output 1.
pin135 : KAGC2 : O : Keyed AGC DAC output 2.
pin136 : IFAD_N1 : IN : Negative phase of the first differential IF input.
10
12
11
n.c. 1
n.c. 2
n.c. 3
n.c. 4
Out 2 5
Rnf 6
7
8
9
pin137 : IFAD_P1 : IN : Positive phase of the first differential IF input.
Ground
Out 1
n.c.
n.c.
n.c.
n.c.
pin138 : VSS_IFAD : - : Ground supply for IF ADCs.
pin139 : VDD_IFAD : - : 3.3V supply for IF ADCs. 1.Terminal Description
pin140 : VIFADP : - : Decoupling for IF ADCs positive reference voltage. pin 1 : N.C. : O : Not in use.
pin141 : VIFADN : - : Ground reference voltage for IF ADCs. pin 2 : N.C. : O : Not in use.
pin142 : VIFADBG : - : Decoupling for IF ADCs bandgap voltage. pin 3 : N.C. : O : Not in use.
pin143 : IFAD_P2 : IN : Positive phase of the second differential IF input. pin 4 : N.C. : O : Not in use.
pin144 : IFAD_N2 : IN : Negative phase of the second differential IF input. pin 5 : Out 2 : O : The motor drive output. Refer Table-1.
051-9126-30 LP62S1024BX-70LLIF 128 x 8 bit SRAM pin 6 : R NF : - : Resistor connection for the output current
detection.
1.Terminal Description pin 7 : Ground : - : Ground.
pin 1 : A 11 : IN : Address signal input. pin 8 : Out 1 : O : The motor drive output. Refer Table-1.
pin 2 : A 9 : IN : Address signal input. pin 9 : N.C. : O : Not in use.
pin 3 : A 8 : IN : Address signal input. pin 10 : N.C. : O : Not in use.
pin 4 : A 13 : IN : Address signal input. pin 11 : N.C. : O : Not in use.
pin 5 : WE_ : IN : Write enable signal input. pin 12 : N.C. : O : Not in use.
pin 6 : CE 2 : IN : The chip enable signal input. pin 13 : N.C. : O : Not in use.
pin 7 : A 15 : IN : Address signal input. pin 14 : N.C. : O : Not in use.
pin 8 : VCC : - : Positive voltage supply. pin 15 : Vmot : - : The power supply terminal for motor drive.
pin 9 : N.C. : - : Not in use. pin 16 : VCC : - : Positive voltage supply.
pin 10 : A 16 : IN : Address signal input. pin 17 : For in : IN : The drive control input. Refer Table-1.
pin 11 : A 14 : IN : Address signal input. pin 18 : P.S. : IN : The power save input. H=power save.
pin 12 : A 12 : IN : Address signal input. pin 19 : Rev : IN : The drive control input. Refer Table-1.
pin 13 : A 7 : IN : Address signal input. pin 20 : Vref : - : RefereN.C.e voltage.
pin 14 : A 6 : IN : Address signal input. pin 21 : N.C. : O : Not in use.
pin 15 : A 5 : IN : Address signal input. pin 22 : N.C. : O : Not in use.
pin 16 : A 4 : IN : Address signal input. pin 23 : N.C. : O : Not in use.
pin 17 : A 3 : IN : Address signal input. pin 24 : N.C. : O : Not in use.
pin 18 : A 2 : IN : Address signal input. Table-1. Truth Table
For in Rev in OUT 1 OUT 2
pin 19 : A 1 : IN : Address signal input. Motion (pin 17) (pin 19) (pin 8) (pin 5)
pin 20 : A 0 : IN : Address signal input.
Standby L L High-Z High-Z
pin 21 : D 0 : I/O : Data input/output.
Forward H L H L
pin 22 : D 1 : I/O : Data input/output.
Reverse L H L H
pin 23 : D 2 : I/O : Data input/output.
Brake H H L L
pin 24 : GND : - : Ground.
pin 25 : D 3 : I/O : Data input/output.
pin 26 : D 4 : I/O : Data input/output. 051-6926-90 BD2051AFJ-TR USB Highside Switch
pin 27 : D 5 : I/O : Data input/output.
pin 28 : D 6 : I/O : Data input/output.
pin 29 : D 7 : I/O : Data input/output. Ground 1 8 Output
pin 30 : CE 1_ : IN : The chip enable signal input. Input 2 Under 7 Output
Charge Over
pin 31 : A 10 : IN : Address signal input. Input 3 Voltage 6 Output
Shut Pump Current
pin 32 : OE_ : IN : Output enable signal input. Detection
Down Over
Truth Table
Current
WE_ CE 1_ CE 2 OE_ 5
(pin 5) (pin 30) (pin 6) (pin 32) I/O Operation Logic Detection
Enable Input 4 Output
x H x x High Z (Positive (Negative
x x L x High Z Logic) Logic)
Thermal
H L H H High Z Shut
H L H L data out Down
L L H x data in
DXZ775USB/DXZ776USB
-8-
pin 11 : D VCC : - : Positive voltage supply. pin 88 : SD Data I : IN : SD data input.
pin 12 : Vref : O : Reference voltage output. pin 89 : SD CK : IN : SD clock input.
pin 13 : VREFI : IN : Reference voltage input. pin 90 : S DA : I/O : Serial data input/output.
pin 14 : VREFI : IN : Reference voltage input. pin 91 : S CK : IN : Serial clock pulse input.
pin 15 : Vref : O : Reference voltage output. pin 92 : B CK : O : Bit clock output.
pin 16 : D VCC : - : Positive voltage supply. pin 93 : DATA : O : DATA output.
pin 17 : D VSS : - : Digital ground. pin 94 : GATE : O : Gate signal input.
pin 18 :D 0 : I/O : Data input/output. pin 95 : D VCC : - : Positive voltage supply.
pin 19 :D 1 : I/O : Data input/output. pin 96 : CHUCK : IN : CD MECHA CHUCK
pin 20 :D 2 : I/O : Data input/output. pin 97 : SD WP : IN : SD write protection.
pin 21 :D 3 : I/O : Data input/output. pin 98 : SD Detect : IN : SD Card detection.
pin 22 :D 4 : I/O : Data input/output. pin 99 : ST REQ : IN : Request signal input.
pin 23 :D 5 : I/O : Data input/output. pin100 : D VSS : - : Digital ground.
pin 24 :D 6 : I/O : Data input/output.
pin 25 :D 7 : I/O : Data input/output.
pin 26 : D VSS : - : Digital ground. 052-7302-00 M30876MJB Switch System controller
pin 27 : D VCC : - : Positive voltage supply.
1.Terminal Description
pin 28 : REQ O : O : Request signal output.
pin 1 : LCD-ON : O : LCD power supply.
pin 29 : LD CONT : O : Loading signal output.
pin 2 : INT1 : IN : The destination setting input.
pin 30 : LD MUTE : O : Muting signal output to the CD mechanism.
pin 3 : IE-BUS-TX : O : IE Bus serial data output.
pin 31 : DR MUTE : O : Drive mute signal output to the CD IC.
pin 4 : IE-BUS-RX : IN : Bus serial data input.
pin 32 : P ON 1 : O : Power ON signal output.
pin 5 : REMOCON : IN : Remote controller signal input terminal.
pin 33 : PON 2 : O : Power ON signal output.
pin 6 : BYTE(GND) : IN : Connect to VSS.
pin 34 : TR A : IN : Photo sensor signal input from the CD
pin 7 : CNVSS : IN : Connect to VSS.
mechanism.
pin 8 : NC : IN : Ground.
pin 35 : TR B : IN : Photo sensor signal input from the CD
pin 9 : NC : IN : Ground.
mechanism.
pin 10 : RESET : IN : The reset signal input.
pin 36 :A 0 : O : Address signal output.
pin 11 : X-OUT : O : The resonator for main clock.
pin 37 :A 1 : O : Address signal output.
pin 12 : GND : - : Ground.
pin 38 :A 2 : O : Address signal output.
pin 13 : X-IN : IN : The resonator for main clock.
pin 39 :A 3 : O : Address signal output.
pin 14 : VCC : - : Positive power supply.
pin 40 :A 4 : O : Address signal output.
pin 15 : VCC : IN : Positive power supply.
pin 41 :A 5 : O : Address signal output.
pin 16 : SYS-ACC-IN : IN : ACC detect signal output.
pin 42 :A 6 : O : Address signal output.
pin 17 : NC : IN : Ground.
pin 43 :A 7 : O : Address signal output.
pin 18 : NC : IN : Ground.
pin 44 : D VSS : - : Digital ground.
pin 19 : NC : IN : Ground.
pin 45 : D VCC : - : Positive voltage supply.
pin 20 : VARI-BLUE : O : Variable blue.
pin 46 :A 8 : O : Address signal output.
pin 21 : NC : IN : Ground.
pin 47 :A 9 : O : Address signal output.
pin 22 : VARI-GREEN : O : Variable green.
pin 48 : A 10 : O : Address signal output.
pin 23 : BACK-L-ON : O : The backlight control signal output.
pin 49 : A 11 : O : Address signal output.
pin 24 : VARI-RED : O : Variable red.
pin 50 : A 12 : O : Address signal output.
pin 25 : KEY-ILL : O : The key illumination ON signal output.
pin 51 : A 13 : O : Address signal output.
pin 26 : NC : IN : Ground.
pin 52 : A 14 : O : Address signal output.
pin 27 : NC : IN : Ground.
pin 53 : A 15 : O : Address signal output.
pin 28 : LCD-CS : O : Chip select signal output to LCD.
pin 54 : A 16 : O : Address signal output.
pin 29 : FLASH TX : O : The serial data output for flash memory.
pin 55 : BUS 0 : I/O : Data input / output.
pin 30 : FLASH RX : IN : The serial data input for flash memory.
pin 56 : BUS 1 : I/O : Data input / output.
pin 31 : FLASH-SCL : IN : Ground.
pin 57 : BUS 2 : I/O : Data input / output.
pin 32 : FLASH-BUSY : O : Not in use.
pin 58 : BUS 3 : I/O : Data input / output.
pin 33 : LCD-SI : O : The serial data input to the LCD driver.
pin 59 : BU CLOCK : O : Clock pulse output.
pin 34 : LCD- AO : O : LCD driver data type control.
pin 60 : CCE : O : Chip enable signal output.
pin 35 : LCD-CLK : O : The clock pulse output to the LCD driver.
pin 61 : CD RESET : O : Reset pulse output.
pin 36 : LCD-RESET : O : LCD driver reset signal output.
pin 62 : D VSS : - : Digital ground.
pin 37 : NC : IN : Ground.
pin 63 : D VCC : - : Positive voltage supply.
pin 38 : NC : IN : Ground.
pin 64 : RD : O : Read enable flag output.
pin 39 : FLASH-EPM : IN : Ground.
pin 65 : S-RAM WR : O : Write command output to the S-RAM.
pin 40 : NC : IN : Ground.
pin 66 : HSSW : IN : Through mode setting.
pin 41 : NC : IN : Ground.
pin 67 : HSSW 2 : IN : Through mode setting.
pin 42 : NC : IN : Ground.
pin 68 : SRAM STND : O : SRAM standby output.
pin 43 : NC : IN : Ground.
pin 69 : BOOT : IN : Flash Memory Write mode selection.
pin 44 : FLASH-CE : IN : The chip enable signal input for flash memory
pin 70 : CHIP SEL : O : Chip select signal output.
pin 45 : NC : IN : Ground.
pin 71 : LR CK : O : LR clock output.
pin 46 : NC : IN : Ground.
pin 72 : AM 1 : IN : Function Mode.
pin 47 : NC : IN : Ground.
pin 73 :X 2 : - : Crystal connection.
pin 48 : NC : IN : Ground.
pin 74 : D VSS : - : Digital ground.
pin 49 : KO0 : O : Key scanning output terminal.
pin 75 :X 1 : - : Crystal connection.
pin 50 : KO1 : O : Key scanning output terminal.
pin 76 : D VCC : - : Positive voltage supply.
pin 51 : KO2 : O : Key scanning output terminal.
pin 77 : USB OC : IN : USB over current.
pin 52 : KO3 : O : Key scanning output terminal.
pin 78 : USB P ON : O : USB opwer on.
pin 53 : NC : IN : Ground.
pin 79 : USB D+IO : I/O : USB D+.
pin 54 : NC : IN : Ground.
pin 80 : USB D-IO : I/O : USB D-.
pin 55 : KI0 : IN : Key scanning intput terminal.
pin 81 : AM 0 : IN : Function Mode.
pin 56 : KI1 : IN : Key scanning intput terminal.
pin 82 : DSP REQ : IN : DSP request input.
pin 57 : KI2 : IN : Key scanning intput terminal.
pin 83 : D VSS : - : Digital ground.
pin 58 : KI3 : IN : Key scanning intput terminal.
pin 84 : TEST : O : For the test.
pin 59 : NC : IN : Ground.
pin 85 : P ON 3 : O : Power ON signal output.
pin 60 : VCC : - : Positive power supply.
pin 86 : SD CS : O : SD chip select output.
pin 61 : NC : IN : Ground.
pin 87 : SD Data O : O : SD data output.
DXZ775USB/DXZ776USB
-9-
pin 62 : GND : - : Ground. pin 82 : NC : IN : Ground.
pin 63 : NC : IN : Ground. pin 83 : NC : IN : Ground.
pin 64 : NC : IN : Ground. pin 84 : NC : IN : Ground.
pin 65 : NC : IN : Ground. pin 85 : NC : IN : Ground.
pin 66 : NC : IN : Ground. pin 86 : NC : IN : Ground.
pin 67 : NC : IN : Ground. pin 87 : NC : IN : Ground.
pin 68 : NC : IN : Ground. pin 88 : NC : IN : Ground.
pin 69 : NC : IN : Ground. pin 89 : NC : IN : Ground.
pin 70 : NC : IN : Ground. pin 90 : NC : IN : Ground.
pin 71 : NC : IN : Ground. pin 91 : NC : IN : Ground.
pin 72 : NC : IN : Ground. pin 92 : NC : IN : Ground.
pin 73 : ILL-DET : IN : The illumination detection signal input. pin 93 : NC : IN : Ground.
pin 74 : NC : IN : Ground. pin 94 : AVSS(GND) : - : Negative voltage supply for A/D converter .
pin 75 : NC : IN : Ground. pin 95 : NC : IN : Ground.
pin 76 : NC : IN : Ground. pin 96 : VREF : IN : Reference vlotage input for A/D converter .
pin 77 : NC : IN : Ground. pin 97 : AVDD : - : Positive voltage supply for A/D converter.
pin 78 : NC : IN : Ground. pin 98 : NC : IN : Ground.
pin 79 : NC : IN : Ground. pin 99 : NC : IN : Ground.
pin 80 : NC : IN : Ground. pin100 : NC : IN : Ground.
pin 81 : NC : IN : Ground.
A4 6
65
58
H3 E2
H1
34
52 H2 8
A5
10
63 1 E1
B2
67
G13
D1 31 41
25
23 B1 26 M1
G5 56
G12 11
D2 57
64 G14
29 35 E2
G2
G4
B1 21 2 20
G5
G14 G1
50
22 G13
G3
G11
A3 E1 G8
H2
73 44 G9
A1
H1 H6 62 G4 G11
H3
72 68 G8
H7
71 H5 22 A8
G6 G9 M1
H4 H6 C5
G6
70 29
B2 G12
32
A2 C2 54 33
K1 55
1 3 C3
K3
K4 53
K2 C5
H5 K3
to MAIN
48 75 H4 43 K4
60 A3 66 C1 66 40
A1 G2 7
A4
17 39
46 47 61 18 38
24
G3 51
37
D1 A5 13
A2 5 30
46
59
12 74
36 H6
A8 G1
49
59
D2 C1
4
49 14
69
H6
16 15
K1 45
C3
H7 K2
28
19
C2
DXZ775USB/DXZ776USB
-11-
DCP section
1-20
1-26
B 1-22
1-23 B 1-25
1-12 1-19
1-10
1-16 1-7
1-5 1-27
1-21
1-11
1-24
1-10 1-15
1-36
1-29 A 1-13 B
1-30 B
1-10 1-7 1-18
1-12 1-14 1-17
1-4 1-28 1-20 1-52
1-8 1-11 1-49
1-35
A 1-16
1-34 1-50 1-49
A 1-7 1-31
1-6
1-50
1-9 1-51
1-38 1-32 1-36 1-46
1-8 1-31 1-50
1-7 1-48
1-33 1-6 1-47
1-49
A 1-31
1-38 1-45
1-44
1-3 1-43 1
1-1
1-2 1-42
A : SANKOL application
B : Grease application 1-37 1-41 Note) Some parts depend on each model.
Note) SANKOL uses G-311S 1-39 1-40 The model name is specified in the
Grease uses CFD-409Z description.
NO. PART NO. DESCRIPTION Q'TY NO. PART NO. DESCRIPTION Q'TY
1 DCP-591-600 DCP ASSY(PE-2899B-A) 1 1-25 345-8647-00 CUSHION 1
DCP-585-800 DCP ASSY(PE-2899K-A/B) 1 1-26 347-6977-00 COVER FILM 1
1-1 335-7724-00 BRAND 1 1-27 335-7992-00 SPRING CVR 1
1-2 373-1125-01 SEEK PANEL(PE-2899B-A) 1 1-28 335-7984-00 IR FILTER 1
373-1125-07 SEEK PANEL(PE-2899K-A/B) 1 1-29 750-6720-00 SPRING (REL) 1
1-3 380-5692-00 UP-DOWN BAR 1 1-30 382-8167-00 RELEASE BUTTON 1
1-4 947-0701-00 SIDE PARTS ASSY 1 1-31 001-7088-90 DIODE 4
1-5 750-6856-00 SPRING 1 1-32 347-8245-00 LEATHER SHEET 1
1-6 347-8210-00 TRIM CVR 2 1-33 347-8246-00 LEATHER SHEET 1
1-7 716-0872-51 SCREW(M1.7x6) 6 1-34 347-8251-00 FILM 6
1-8 335-8004-00 ROLLER 2 1-35 380-5691-00 VOLUME BAR 1
1-9 370-6260-01 ESCUTCHEON(PE-2899B-A) 1 1-36 347-8249-00 DOUBLE FACE 4
370-6260-00 ESCUTCHEON(PE-2899K-A/B) 1 1-37 347-8252-00 FILM 2
1-10 335-7989-00 SPRING CAP 6 1-38 347-8208-00 LEATHER SHEET 4
1-11 750-6825-00 SPRING 2 1-39 331-4373-00 LCD COVER 1
1-12 335-8005-00 SPRING CVR 2 1-40 347-8213-00 FILM 1
1-13 382-8169-02 BUTTON(ISR) 1 1-41 379-1381-81 INDICATOR(LCD) 1
1-14 382-8165-00 BUTTON(ENT) 1 1-42 347-8212-00 FILM 1
1-15 382-8166-00 BUTTON(SOUND) 1 1-43 347-8211-00 FILM 1
1-16 335-7985-00 INDICATOR-A 2 1-44 335-7351-00 ILLUMI PLATE 1
1-17 335-7987-00 ILLUMI PLATE(R) 1 1-45 335-7988-00 LCD HOLDER 1
1-18 335-6899-02 REAR CVR 1 1-46 060-4017-90 IR-RECIEVER 1
1-19 347-6628-00 SPACER FILM 1 1-47 ------------- SWITCH PWB 1
1-20 716-0872-62 SCREW(M1.7X6) 5 1-48 076-0708-02 PLUG 2
1-21 335-7986-00 ILLUMI PLATE(L) 1 1-49 013-6524-50 TACT SWITCH 9
1-22 382-8164-00 BUTTON(OPEN) 1 1-50 013-7419-00 SWITCH 3
1-23 382-8163-00 BUTTON(SRC) 1 1-51 074-2226-71 OUTLET SOCKET(21P) 1
1-24 382-8168-00 BUTTON(TITLE) 1 1-52 076-0647-00 PLUG (16P) 1
DXZ775USB/DXZ776USB
-12-
Inner escutcheon section
36
33 35
28
Grease
application Grease
application
Grease
application
34
Finished figure
33
33 32
19
20
12
26 8
18 Grease
application
Grease 8
application 12 31
11 41
37 30
17
10 38
29 8
9 26
12
Grease
application
8
13 12
6
22
15
8 21 16 12
24 Grease
25 application
14
1 12 27
40
12 3 4 39
23 12
2
5
7 8
DXZ775USB/DXZ776USB
-13-
Main section
44 39 39
41
42 40
39
38
41 39
It attaches in 30 27
the open position. 34
32 27
53
45 31
39 27 43 33 43
29
26 28
46 29
21 37 36
20
50 25 35
51 27 8
50 5 7
Inner escutcheon 4 9 10
11 24
3 23
19 2
13 29
52
1
22
49 12 18 14 14
17 6
16
15
48 27
47
NO. PART NO. DESCRIPTION Q'TY NO. PART NO. DESCRIPTION Q'TY
1 076-0312-02 PLUG(2P) 1 29 714-3006-8B MACHINE SCREW(M3x6) 7
2 013-7206-50 DETECTOR SWITCH 1 30 074-1138-65 OUTLET SOCKET(15P) 1
3 013-7106-00 DETECTOR SWITCH 1 31 076-0478-55 PLUG(5P) 1
4 331-3378-00 SW-HOLDER 1 32 074-1228-79 OUTLET SOCKET(29P) 1
5 880-2091E TUNER 1 33 074-1138-60 OUTLET SOCKET(10P) 1
6 074-1138-79 OUTLET SOCKET(29P) 1 34 ------------- MECH PWB 1
7 074-1214-50 OUTLET SOCKET(16P) 1 35 331-2744-00 STOPPER 1
8 331-3954-00 IC-HOLDER 1 36 347-7581-10 CUSHION 2
9 076-0368-16 PLUG(16P) 1 37 303-0472-07 UPPER-CVR 1
10 076-6003-18 PLUG(18P) 1 38 347-7579-10 INSULATOR 1
11 074-1194-00 OUTLET SOCKET(CeNET) 1 39 714-2603-8B MACHINE SCREW(M2.6x3) 7
12 347-6215-00 SPACER-FILM 1 40 331-3324-00 CD-SUB-BRKT(R) 1
13 313-1924-00 HEAT SINK 1 41 347-8269-00 SPACER 2
14 714-3005-8B MACHINE SCREW(M3x5) 4 42 929-5016-80 CD-MECH-MODULE 1
15 305-0348-00 SIDE-CVR(R) 1 43 716-1670-01 SCREW(M2x4) 2
16 013-6103-00 TACT SWITCH 1 44 816-4026-55 FLAT WIRE 1
17 ------------- MAIN PWB 1 45 331-4367-00 MECH BRKT(F) 1
18 001-7062-90 DIODE 1 46 347-6536-00 PROTECT SHEET 1
19 305-0347-00 SIDE-CVR(L) 1 47 347-7578-10 INSULATOR 1
20 731-3006-8B TAPTIGHT(M3x6) 1 48 304-0483-00 LOWER-CVR 1
21 092-2215-50 ANT-RECEPT 1 49 276-0178-00 SETPLATE(PE-2899B-A) 1
22 074-1198-68 OUTLET SOCKET(18P) 1 276-0239-00 SETPLATE(PE-2899K-A) 1
23 307-0723-01 REAR-CVR 1 276-0240-00 SETPLATE(PE-2899K-B) 1
24 074-0898-16 OUTLET SOCKET(16P) 1 50 716-0717-60 STEEL SCREW(M2.3x0.4P) 2
25 ------------- D/D PWB 1 51 780-2005-50 SCREW(M2x5) 2
26 855-0613-51 USB CABLE 1 52 345-8701-00 CUSHION 1
27 731-3005-8B TAPTIGHT(M3x5) 8 53 347-8250-00 DOUBLE FACE 1
28 313-1923-00 HEAT SINK 1
DXZ775USB/DXZ776USB
-14-
Note)1. Several different parts of the same reference number are alternative parts.
ELECTRICAL PARTS LIST One of those parts is used in the set.
Main PWB (B1) section 2. Some parts depend on each model.
The model name is specified in the description.
REF No. PART No. DESCRIPTION REF No. PART No. DESCRIPTION REF No. PART No. DESCRIPTION
ANT1 092-2215-50 ANT-RECEPT C314 043-1804-90 0.1uF C380 043-1735-90 100pF
BL1 880-2091E TUNER C315 043-1735-90 100pF C382 043-1611-90 2200pF
C2 043-1719-90 22pF C316 043-1735-90 100pF C382 046-2222-58 2200pF
C3 042-1631-50 10V 100uF C317 043-1735-90 100pF C383 043-1611-90 2200pF
C4 043-1802-90 0.01uF C318 043-1802-90 0.01uF C383 046-2222-58 2200pF
C5 043-1821-90 0.022uF C320 043-1804-90 0.1uF C384 043-1819-90 2200pF
C7 043-1800-90 1000pF C321 043-1735-90 100pF C385 043-1819-90 2200pF
C8 187-4763-15 6.3V 47uF C322 042-0654-52 6.3V 10uF C386 043-1819-90 2200pF
C9 043-1608-90 0.1uF C324 043-1804-90 0.1uF C387 043-1819-90 2200pF
C9 046-1042-78 0.1uF C325 043-0552-90 6.3V 47uF C400 043-0540-00 6.3V 10uF
C10 043-1804-90 0.1uF C327 043-1824-90 0.22uF C401 043-0540-00 6.3V 10uF
C11 043-1739-90 150pF C327 168-2245-79 0.22uF C402 042-1563-71 16V 100uF
C12 043-1735-90 100pF C329 043-0540-00 6.3V 10uF C403 043-0540-00 6.3V 10uF
C13 043-1735-90 100pF C330 043-1841-90 0.047uF C404 043-0540-00 6.3V 10uF
C14 043-1800-90 1000pF C331 043-1608-90 0.1uF C405 043-0540-00 6.3V 10uF
C15 043-0552-90 6.3V 47uF C331 046-1042-78 0.1uF C406 043-0540-00 6.3V 10uF
C101 042-1715-00 16V 3300uF C332 163-2273-25 10V 220uF C407 043-0540-00 6.3V 10uF
C102 172-1041-15 0.1uF C333 043-1804-90 0.1uF C408 043-0540-00 6.3V 10uF
C103 189-1083-12 6.3V 1000uF C334 043-1711-90 10pF C409 042-1563-71 16V 100uF
C104 042-0654-52 6.3V 10uF C335 043-1824-90 0.22uF C410 043-1804-90 0.1uF
C105 042-0654-52 6.3V 10uF C335 168-2245-79 0.22uF C411 043-0540-00 6.3V 10uF
C106 042-0654-52 6.3V 10uF C336 043-1821-90 0.022uF C412 043-0540-00 6.3V 10uF
C107 042-0654-52 6.3V 10uF C337 043-1606-90 1000pF C413 043-0540-00 6.3V 10uF
C108 042-0654-52 6.3V 10uF C337 046-1022-58 1000pF C414 043-0540-00 6.3V 10uF
C109 042-0654-52 6.3V 10uF C338 043-1606-90 1000pF C415 043-0540-00 6.3V 10uF
C110 163-2253-65 50V 2.2uF C338 046-1022-58 1000pF C416 043-0540-00 6.3V 10uF
C114 178-4742-78 0.47uF C340 043-1751-90 470pF C417 043-0540-00 6.3V 10uF
C115 178-4742-78 0.47uF C341 043-1821-90 0.022uF C418 043-0540-00 6.3V 10uF
C116 178-4742-78 0.47uF C342 043-1821-90 0.022uF C419 043-0540-00 6.3V 10uF
C117 178-4742-78 0.47uF C343 043-1711-90 10pF C420 043-0540-00 6.3V 10uF
C119 163-1053-65 50V 1uF C344 043-0540-02 16V 1uF C421 043-0540-00 6.3V 10uF
C120 163-1063-35 16V 10uF C345 043-1821-90 0.022uF C422 043-0540-00 6.3V 10uF
C121 043-1802-90 0.01uF C346 043-1821-90 0.022uF C423 043-0264-52 1000pF
C124 043-1804-90 0.1uF C347 043-1802-90 0.01uF C424 043-1731-90 68pF
C125 043-1800-90 1000pF C350 043-0540-00 6.3V 10uF C425 043-1731-90 68pF
C126 043-1800-90 1000pF C351 043-1751-90 470pF C426 043-0264-52 1000pF
C127 043-1800-90 1000pF C352 043-1821-90 0.022uF C427 043-0264-51 2200pF
C128 043-1800-90 1000pF C355 043-1804-90 0.1uF C428 043-1735-90 100pF
C129 043-1800-90 1000pF C356 043-1606-90 1000pF C429 043-1735-90 100pF
C130 043-1800-90 1000pF C356 046-1022-58 1000pF C430 043-0264-51 2200pF
C131 043-1800-90 1000pF C357 043-1741-90 180pF C431 043-0264-51 2200pF
C132 043-1800-90 1000pF C357 166-1811-50 180pF C432 043-1735-90 100pF
C133 043-1711-90 10pF C358 043-0551-90 6.3V 4.7uF C433 043-1735-90 100pF
C134 043-1711-90 10pF C359 043-0551-90 6.3V 4.7uF C434 043-0264-51 2200pF
C135 043-1711-90 10pF C360 043-1800-90 1000pF C435 043-1731-90 68pF
C136 043-1711-90 10pF C361 042-0654-52 6.3V 10uF C436 043-1735-90 100pF
C137 043-1800-90 1000pF C362 043-0551-90 6.3V 4.7uF C437 043-1735-90 100pF
C138 043-1800-90 1000pF C363 043-1821-90 0.022uF C438 043-1731-90 68pF
C139 043-1800-90 1000pF C364 043-1831-90 0.033uF C439 043-1735-90 100pF
C140 043-1800-90 1000pF C365 043-1804-90 0.1uF C440 043-1735-90 100pF
C301 178-4742-78 0.47uF C366 043-1735-90 100pF C441 043-1804-90 0.1uF
C302 043-0540-00 6.3V 10uF C367 043-1821-90 0.022uF C442 043-0264-52 1000pF
C303 163-1073-15 6.3V 100uF C368 043-1608-90 0.1uF C443 043-0264-52 1000pF
C304 043-1601-90 100pF C368 046-1042-78 0.1uF C444 043-0264-51 2200pF
C304 045-1011-50 100pF C369 043-0551-90 6.3V 4.7uF C445 043-0264-51 2200pF
C305 043-1601-90 100pF C370 042-0654-52 6.3V 10uF C446 043-0264-51 2200pF
C305 045-1011-50 100pF C371 043-1608-90 0.1uF C447 043-0264-51 2200pF
C306 043-0540-00 6.3V 10uF C371 046-1042-78 0.1uF C448 043-0540-00 6.3V 10uF
C307 043-0540-00 6.3V 10uF C372 042-0654-52 6.3V 10uF C449 043-0540-00 6.3V 10uF
C308 043-0540-00 6.3V 10uF C373 043-1608-90 0.1uF C450 043-0540-00 6.3V 10uF
C309 043-0540-00 6.3V 10uF C373 046-1042-78 0.1uF C451 043-0540-00 6.3V 10uF
C310 043-0540-00 6.3V 10uF C374 043-0552-90 6.3V 47uF C452 163-1063-35 16V 10uF
C311 043-1606-90 1000pF C376 043-1821-90 0.022uF C600 042-1563-71 16V 100uF
C311 046-1022-58 1000pF C377 043-1608-90 0.1uF C601 043-1804-90 0.1uF
C312 043-1606-90 1000pF C377 046-1042-78 0.1uF C602 163-2263-35 16V 22uF
C312 046-1022-58 1000pF C378 043-1601-90 100pF C603 043-1841-90 0.047uF
C313 043-1606-90 1000pF C378 045-1011-50 100pF C604 043-1735-90 100pF
C313 046-1022-58 1000pF C379 043-1735-90 100pF C605 042-1631-50 10V 100uF
DXZ775USB/DXZ776USB
-15-
REF No. PART No. DESCRIPTION REF No. PART No. DESCRIPTION REF No. PART No. DESCRIPTION
C606 043-1606-90 1000pF D101 001-0592-61 1N5404 L316 010-3112-91 1.5k ohm/100MHz
C606 046-1022-58 1000pF D102 001-0466-91 S5688G L317 010-3112-91 1.5k ohm/100MHz
C607 043-1606-90 1000pF D103 001-1310-00 KDS160 L318 010-3112-91 1.5k ohm/100MHz
C607 046-1022-58 1000pF D104 001-1310-00 KDS160 L319 010-3112-91 1.5k ohm/100MHz
C608 187-4763-35 16V 47uF D105 001-4301-43 HZU8.2B1 L320 010-3112-90 1k ohm/100MHz
C609 043-1602-90 18pF D130 001-1310-00 KDS160 L321 010-3112-91 1.5k ohm/100MHz
C609 045-1801-50 18pF D600 001-0401-47 HZS9C1-TJ L323 010-3112-90 1k ohm/100MHz
C610 043-1603-90 22pF D601 001-0504-47 HZS9B3L L324 010-3112-90 1k ohm/100MHz
C610 045-2201-50 22pF D602 001-0504-45 HZS9B1L L325 010-3112-90 1k ohm/100MHz
C611 042-1631-50 10V 100uF D603 001-0347-36 MA4062H L377 010-3112-91 1.5k ohm/100MHz
C612 043-1804-90 0.1uF D604 001-7062-90 RBR1111C L601 010-3112-90 1k ohm/100MHz
C613 187-4763-35 16V 47uF D605 001-0644-90 MA113 L602 010-6025-00 10uH
C614 043-1821-90 0.022uF D606 001-0644-90 MA113 L603 010-3406-54 2.2uH
C615 163-1073-35 16V 100uF D607 001-1310-00 KDS160 L801 010-3112-91 1.5k ohm/100MHz
C616 172-4731-15 0.047uF D608 001-2601-90 MA728 L802 010-3112-91 1.5k ohm/100MHz
C617 042-1596-00 5.5V 0.33F D609 001-1310-00 KDS160 L803 010-3112-91 1.5k ohm/100MHz
C618 042-1577-00 6.3V 100uF D610 001-0466-91 S5688G L805 010-3112-91 1.5k ohm/100MHz
C619 043-0510-51 25V 10uF D611 001-0529-26 MA8047M L807 010-3112-91 1.5k ohm/100MHz
C620 043-0540-00 6.3V 10uF D612 001-1310-00 KDS160 L808 010-3112-91 1.5k ohm/100MHz
C621 043-1607-90 0.01uF D613 001-1310-00 KDS160 L809 010-3112-91 1.5k ohm/100MHz
C621 046-1032-78 0.01uF D614 001-0466-91 S5688G L810 010-3112-91 1.5k ohm/100MHz
C624 043-1824-90 0.22uF D615 001-4301-44 HZU8.2B2 L811 010-3112-91 1.5k ohm/100MHz
C624 168-2245-79 0.22uF D616 001-0504-33 HZS6B2L L812 010-3112-91 1.5k ohm/100MHz
C625 043-1608-90 0.1uF D617 001-0644-90 MA113 L813 010-3112-91 1.5k ohm/100MHz
C625 046-1042-78 0.1uF D618 001-0644-90 MA113 L814 010-3112-91 1.5k ohm/100MHz
C626 187-1063-35 16V 10uF D801 001-0584-16 MA8039M L815 010-3105-67 1k ohm/100MHz
C628 043-1804-90 0.1uF FIL401 060-3115-51 CKD310JB1C224ST L816 010-3105-67 1k ohm/100MHz
C629 163-3363-25 10V 33uF FIL404 060-3115-51 CKD310JB1C224ST L817 010-3105-67 1k ohm/100MHz
C630 043-1804-90 0.1uF IC1 051-1905-91 AN77L05M L818 010-3105-67 1k ohm/100MHz
C631 043-1802-90 0.01uF IC101 051-2056-00 TB2913HQ L819 010-3105-67 1k ohm/100MHz
C632 043-1804-90 0.1uF IC301 ----------- SAF7730HN219A L820 010-3105-67 1k ohm/100MHz
C633 043-1606-90 1000pF IC402 051-3026-90 NJM4580V L821 010-3105-67 1k ohm/100MHz
C633 046-1022-58 1000pF IC403 051-3026-90 NJM4580V L822 010-3105-67 1k ohm/100MHz
C634 163-1063-35 16V 10uF IC404 051-3026-90 NJM4580V L823 010-3105-67 1k ohm/100MHz
C635 043-1735-90 100pF IC602 051-6078-90 BA6285AFP L824 010-3105-67 1k ohm/100MHz
C636 163-1063-35 16V 10uF IC603 052-3977-01 M30873MHB-704GP L825 010-3105-67 1k ohm/100MHz
C637 043-0540-00 6.3V 10uF IC604 051-3335-90 AN77L04M L826 010-3105-67 1k ohm/100MHz
C638 043-1804-90 0.1uF IC605 051-9402-68 BR93L58F-WE2 L827 010-3105-67 1k ohm/100MHz
C639 043-1802-90 0.01uF IC606 051-5437-58 R3111N211A Q1 125-7005-90 PHK04P02T
C640 043-1601-90 100pF IC606 051-5437-08 S-80821CNMC- Q2 190-1365-50 2SA1365
C640 045-1011-50 100pF B8GT2G Q3 125-2041-96 RT1N436M
C641 043-1735-90 100pF IC607 051-6600-90 LA2335M Q4 125-2041-96 RT1N436M
C801 043-1607-90 0.01uF IC608 051-3406-90 NJM2078M Q5 190-1602-00 2SA1602A
C801 046-1032-78 0.01uF IC801 051-9109-40 BS62LV256TI Q101 125-4012-90 KTD1304
C802 043-0540-00 6.3V 10uF IC802 051-6705-00 AK7720A Q102 125-4012-90 KTD1304
C803 043-1804-90 0.1uF J101 074-1214-50 16P Q103 125-4012-90 KTD1304
C804 043-0540-00 6.3V 10uF J102 076-6003-18 18P Q104 125-4012-90 KTD1304
C805 043-0540-00 6.3V 10uF J602 074-1198-68 18P Q105 125-4012-90 KTD1304
C806 043-1804-90 0.1uF J603 076-0312-02 2P Q106 125-4012-90 KTD1304
C807 043-0540-00 6.3V 10uF J604 074-1194-00 13P Q108 125-2041-93 RT1N241M
C808 043-1804-90 0.1uF J605 074-1138-79 20P Q109 125-0034-96 RT1P436M
C809 043-1804-90 0.1uF J606 076-0368-16 16P Q110 125-2041-96 RT1N436M
C810 043-1804-90 0.1uF L1 010-2003-04 30uH(Variable) Q112 192-4155-49 2SC4155A
C811 043-1850-90 6800pF L2 010-2279-50 4.7uH Q401 125-4012-90 KTD1304
C812 043-1804-90 0.1uF L3 010-2279-50 4.7uH Q402 125-4012-90 KTD1304
C813 043-1804-90 0.1uF L101 010-8038-01 CHOKE COIL 130uH Q403 125-4012-90 KTD1304
C814 043-1804-90 0.1uF L102 010-3105-67 1k ohm/100MHz Q404 125-4012-90 KTD1304
C815 043-0540-00 6.3V 10uF L103 010-3105-67 1k ohm/100MHz Q405 125-4012-90 KTD1304
C816 043-0540-00 6.3V 10uF L104 010-3105-67 1k ohm/100MHz Q406 125-4012-90 KTD1304
C817 043-1800-90 1000pF L105 010-3105-67 1k ohm/100MHz Q407 125-4012-90 KTD1304
C818 043-1802-90 0.01uF L106 010-3105-67 1k ohm/100MHz Q408 125-4012-90 KTD1304
C888 043-1802-90 0.01uF L107 010-3105-67 1k ohm/100MHz Q409 125-4012-90 KTD1304
CCT401 010-3042-54 600 ohm L303 010-3112-90 1k ohm/100MHz Q410 125-4012-90 KTD1304
CCT402 010-3042-54 600 ohm L305 010-3112-90 1k ohm/100MHz Q411 125-4012-90 KTD1304
CCT403 010-3042-54 600 ohm L306 010-3112-90 1k ohm/100MHz Q412 125-4012-90 KTD1304
CCT404 010-3042-54 600 ohm L309 010-3112-91 1.5k ohm/100MHz Q600 125-4015-90 KTC2026
CCT405 010-3042-54 600 ohm L311 010-3105-67 1k ohm/100MHz Q601 198-0302-50 2SK302
CCT406 010-3042-54 600 ohm L312 010-3105-67 1k ohm/100MHz Q602 190-1602-00 2SA1602A
D1 001-1310-00 KDS160 L313 010-3112-91 1.5k ohm/100MHz Q603 125-2041-93 RT1N241M
D2 001-2601-90 MA728 L314 010-3105-67 1k ohm/100MHz Q605 125-9015-92 RN4902
D3 001-4301-28 HZU5.1B1 L315 010-3105-67 1k ohm/100MHz Q606 125-2041-93 RT1N241M
DXZ775USB/DXZ776USB
-16-
REF No. PART No. DESCRIPTION REF No. PART No. DESCRIPTION REF No. PART No. DESCRIPTION
Q607 190-1365-50 2SA1365 R59 033-1011-15 1/16W 100 ohm R418 032-0140-07 1/10W 11k ohm
Q608 125-4014-90 KTC2020D R60 119-1031-15 1/10W 10k ohm R419 032-0140-07 1/10W 11k ohm
Q609 125-2041-93 RT1N241M R64 119-0000-05 1/10W 0 ohm JW R420 032-0140-22 1/10W 68k ohm
Q611 125-9015-92 RN4902 R67 119-0000-05 1/10W 0 ohm JW R421 032-0140-22 1/10W 68k ohm
Q612 125-4014-90 KTC2020D R68 033-1011-15 1/16W 100 ohm R422 032-0140-07 1/10W 11k ohm
Q615 125-2041-92 RT1N141M R69 119-1031-15 1/10W 10k ohm R423 032-0140-07 1/10W 11k ohm
Q616 190-1602-00 2SA1602A R70 033-1011-15 1/16W 100 ohm R424 032-0140-07 1/10W 11k ohm
Q617 101-0941-00 2SB941 R71 033-1031-15 1/16W 10k ohm R425 032-0140-07 1/10W 11k ohm
Q618 125-0034-93 RT1P241M R72 033-1011-15 1/16W 100 ohm R426 032-0140-22 1/10W 68k ohm
Q619 190-1602-00 2SA1602A R73 119-0000-05 1/10W 0 ohm JW R427 032-0140-22 1/10W 68k ohm
Q620 190-1602-00 2SA1602A R74 033-1031-15 1/16W 10k ohm R428 032-0140-07 1/10W 11k ohm
Q621 192-4155-49 2SC4155A R75 033-1031-15 1/16W 10k ohm R429 032-0140-07 1/10W 11k ohm
Q622 192-4155-49 2SC4155A R76 119-0000-05 1/10W 0 ohm JW R430 119-4321-15 1/10W 4.3k ohm
Q623 125-0034-93 RT1P241M R77 119-0000-05 1/10W 0 ohm JW R431 032-0140-79 1/10W 2.7k ohm
Q624 125-2041-93 RT1N241M R78 119-1031-15 1/10W 10k ohm R432 032-0140-79 1/10W 2.7k ohm
Q625 125-2041-93 RT1N241M R79 033-4721-15 1/16W 4.7k ohm R433 119-4321-15 1/10W 4.3k ohm
Q626 131-1260-00 2SB1260 R80 119-1011-15 1/10W 100 ohm R434 119-4321-15 1/10W 4.3k ohm
Q627 190-1602-00 2SA1602A R81 119-0000-05 1/10W 0 ohm JW R435 032-0140-79 1/10W 2.7k ohm
Q628 125-2041-93 RT1N241M R82 119-1011-15 1/10W 100 ohm R436 032-0140-79 1/10W 2.7k ohm
Q629 131-1260-00 2SB1260 R86 033-0000-05 0.5A 0 ohm R437 032-0140-79 1/10W 2.7k ohm
Q630 125-4015-90 KTC2026 R87 033-0000-05 0.5A 0 ohm R438 032-0140-79 1/10W 2.7k ohm
Q631 125-4015-90 KTC2026 R90 119-0000-05 1/10W 0 ohm JW R439 119-4321-15 1/10W 4.3k ohm
Q632 190-1602-00 2SA1602A R101 119-1031-15 1/10W 10k ohm R440 032-0140-22 1/10W 68k ohm
Q633 125-2041-96 RT1N436M R102 033-3331-15 1/16W 33k ohm R441 032-0140-79 1/10W 2.7k ohm
Q635 125-0034-93 RT1P241M R103 033-1021-15 1/16W 1k ohm R442 032-0140-22 1/10W 68k ohm
Q636 192-4155-49 2SC4155A R104 033-5621-15 1/16W 5.6k ohm R443 032-0140-79 1/10W 2.7k ohm
Q638 125-9015-92 RN4902 R108 119-4721-15 1/10W 4.7k ohm R444 032-0140-22 1/10W 68k ohm
Q801 125-2041-96 RT1N436M R110 119-1021-15 1/10W 1k ohm R445 032-0140-22 1/10W 68k ohm
Q907 125-2041-93 RT1N241M R111 119-1021-15 1/10W 1k ohm R446 032-0140-22 1/10W 68k ohm
Q908 125-0034-96 RT1P436M R112 119-1021-15 1/10W 1k ohm R447 032-0140-22 1/10W 68k ohm
R2 119-1031-15 1/10W 10k ohm R113 119-3311-15 1/10W 330 ohm R450 033-1021-15 1/16W 1k ohm
R3 119-1041-15 1/10W 100k ohm R114 119-3311-15 1/10W 330 ohm R452 033-1021-15 1/16W 1k ohm
R6 119-1031-15 1/10W 10k ohm R115 119-3311-15 1/10W 330 ohm R453 033-1021-15 1/16W 1k ohm
R7 119-1031-15 1/10W 10k ohm R116 119-3311-15 1/10W 330 ohm R454 033-1021-15 1/16W 1k ohm
R8 033-1031-15 1/16W 10k ohm R117 119-3311-15 1/10W 330 ohm R455 033-1021-15 1/16W 1k ohm
R10 033-1021-15 1/16W 1k ohm R118 119-3311-15 1/10W 330 ohm R456 033-3311-15 1/16W 330 ohm
R11 033-1031-15 1/16W 10k ohm R119 119-2231-15 1/10W 22k ohm R457 033-1021-15 1/16W 1k ohm
R16 033-1021-15 1/16W 1k ohm R120 119-2231-15 1/10W 22k ohm R458 033-1021-15 1/16W 1k ohm
R17 119-0000-05 1/10W 0 ohm JW R121 119-2231-15 1/10W 22k ohm R459 033-3311-15 1/16W 330 ohm
R18 119-0000-05 1/10W 0 ohm JW R122 119-2231-15 1/10W 22k ohm R460 033-3311-15 1/16W 330 ohm
R22 033-1831-15 1/16W 18k ohm R123 119-2231-15 1/10W 22k ohm R461 033-3311-15 1/16W 330 ohm
R23 119-1031-15 1/10W 10k ohm R124 119-2231-15 1/10W 22k ohm R462 033-1021-15 1/16W 1k ohm
R24 033-1831-15 1/16W 18k ohm R133 116-1521-15 1/4WS 1.5k ohm R463 033-3311-15 1/16W 330 ohm
R25 119-0000-05 1/10W 0 ohm JW R134 119-1021-15 1/10W 1k ohm R464 033-3311-15 1/16W 330 ohm
R26 119-0000-05 1/10W 0 ohm JW R135 119-1021-15 1/10W 1k ohm R465 033-3311-15 1/16W 330 ohm
R27 119-1831-15 1/10W 18k ohm R136 119-1021-15 1/10W 1k ohm R466 033-1021-15 1/16W 1k ohm
R28 119-3331-15 1/10W 33k ohm R137 119-1021-15 1/10W 1k ohm R467 033-3311-15 1/16W 330 ohm
R29 119-1831-15 1/10W 18k ohm R145 032-0140-50 1/10W 10k ohm R468 033-3311-15 1/16W 330 ohm
R30 119-3331-15 1/10W 33k ohm R151 033-2231-15 1/16W 22k ohm R469 033-1021-15 1/16W 1k ohm
R31 119-3331-15 1/10W 33k ohm R301 119-0000-05 1/10W 0 ohm JW R470 033-3311-15 1/16W 330 ohm
R32 119-1831-15 1/10W 18k ohm R302 119-0000-05 1/10W 0 ohm JW R471 033-1021-15 1/16W 1k ohm
R33 119-3331-15 1/10W 33k ohm R303 119-0000-05 1/10W 0 ohm JW R472 033-1021-15 1/16W 1k ohm
R34 119-1831-15 1/10W 18k ohm R304 119-0000-05 1/10W 0 ohm JW R473 033-3311-15 1/16W 330 ohm
R35 119-0000-05 1/10W 0 ohm JW R337 033-1041-15 1/16W 100k ohm R474 033-1021-15 1/16W 1k ohm
R36 119-1031-15 1/10W 10k ohm R341 033-1041-15 1/16W 100k ohm R475 033-3311-15 1/16W 330 ohm
R37 119-1031-15 1/10W 10k ohm R355 119-1021-15 1/10W 1k ohm R600 119-1011-15 1/10W 100 ohm
R39 119-2201-15 1/10W 22 ohm R361 119-1021-15 1/10W 1k ohm R601 033-1031-15 1/16W 10k ohm
R40 119-0000-05 1/10W 0 ohm JW R401 033-1021-15 1/16W 1k ohm R602 033-2231-15 1/16W 22k ohm
R41 119-1001-15 1/10W 10 ohm R402 033-1021-15 1/16W 1k ohm R603 119-3921-15 1/10W 3.9k ohm
R42 119-0000-05 1/10W 0 ohm JW R403 033-1021-15 1/16W 1k ohm R604 119-1031-15 1/10W 10k ohm
R43 119-0000-05 1/10W 0 ohm JW R404 033-1021-15 1/16W 1k ohm R605 116-4711-15 1/4WS 470 ohm
R44 119-0000-05 1/10W 0 ohm JW R405 033-1021-15 1/16W 1k ohm R606 116-4711-15 1/4WS 470 ohm
R45 119-4721-15 1/10W 4.7k ohm R406 033-1021-15 1/16W 1k ohm R607 033-1031-15 1/16W 10k ohm
R46 119-4721-15 1/10W 4.7k ohm R407 119-8211-15 1/10W 820 ohm R608 116-1811-15 1/4WS 180 ohm
R49 119-0000-05 1/10W 0 ohm JW R408 119-4711-15 1/10W 470 ohm R609 033-2221-15 1/16W 2.2k ohm
R50 119-0000-05 1/10W 0 ohm JW R412 032-0140-55 1/10W 4.7k ohm R610 033-1031-15 1/16W 10k ohm
R51 119-0000-05 1/10W 0 ohm JW R413 032-0140-55 1/10W 4.7k ohm R611 033-1031-15 1/16W 10k ohm
R52 119-0000-05 1/10W 0 ohm JW R414 032-0140-22 1/10W 68k ohm R612 033-1031-15 1/16W 10k ohm
R53 119-1001-15 1/10W 10 ohm R415 032-0140-22 1/10W 68k ohm R613 119-1031-15 1/10W 10k ohm
R54 033-1001-15 1/16W 10 ohm R416 032-0140-55 1/10W 4.7k ohm (PE-2899B-A)
R56 033-1021-15 1/16W 1k ohm R417 032-0140-55 1/10W 4.7k ohm R614 119-1031-15 1/10W 10k ohm
DXZ775USB/DXZ776USB
-17-
REF No. PART No. DESCRIPTION REF No. PART No. DESCRIPTION REF No. PART No. DESCRIPTION
R616 119-0000-05 1/10W 0 ohm JW R650 033-3321-15 1/16W 3.3k ohm R690 119-4731-15 1/10W 47k ohm
R617 119-2231-15 1/10W 22k ohm R651 033-1531-15 1/16W 15k ohm R691 119-1031-15 1/10W 10k ohm
R620 119-1031-15 1/10W 10k ohm R652 119-3321-15 1/10W 3.3k ohm R693 119-0000-05 1/10W 0 ohm JW
(PE-2899K-A/B) R653 119-0000-05 1/10W 0 ohm JW R697 033-4731-15 1/16W 47k ohm
R622 119-1031-15 1/10W 10k ohm R654 032-0140-54 1/10W 22k ohm R698 033-1041-15 1/16W 100k ohm
R623 033-1811-15 1/16W 180 ohm R655 033-1051-15 1/16W 1M ohm R801 119-0000-05 1/10W 0 ohm JW
R624 033-1031-15 1/16W 10k ohm R656 119-0000-05 1/10W 0 ohm JW R802 119-0000-05 1/10W 0 ohm JW
R625 116-3911-15 1/4WS 390 ohm R657 116-1591-15 1/4WS 1.5 ohm R803 119-0000-05 1/10W 0 ohm JW
R626 119-0000-05 1/10W 0 ohm JW R658 033-2231-15 1/16W 22k ohm R804 119-0000-05 1/10W 0 ohm JW
R628 119-1011-15 1/10W 100 ohm R659 033-1031-15 1/16W 10k ohm R805 033-0000-05 0.5A 0 ohm
R629 033-1011-15 1/16W 100 ohm R660 116-1591-15 1/4WS 1.5 ohm R806 033-0000-05 0.5A 0 ohm
R630 119-1011-15 1/10W 100 ohm R661 116-6801-15 1/4WS 68 ohm R807 033-0000-05 0.5A 0 ohm
R631 033-1011-15 1/16W 100 ohm R662 033-1041-15 1/16W 100k ohm R808 033-0000-05 0.5A 0 ohm
R633 033-1021-15 1/16W 1k ohm R663 033-1031-15 1/16W 10k ohm R809 033-5611-15 1/16W 560 ohm
R634 033-1041-15 1/16W 100k ohm R664 119-4731-15 1/10W 47k ohm R810 033-4711-15 1/16W 470 ohm
R635 119-4721-15 1/10W 4.7k ohm R665 119-4731-15 1/10W 47k ohm R811 033-4711-15 1/16W 470 ohm
R636 033-1031-15 1/16W 10k ohm R666 116-1221-15 1/4WS 1.2k ohm R813 033-5611-15 1/16W 560 ohm
R637 033-1031-15 1/16W 10k ohm R667 032-0140-66 1/10W 220 ohm R815 119-3311-15 1/10W 330 ohm
R638 033-1031-15 1/16W 10k ohm R668 032-0140-67 1/10W 3.3k ohm R816 119-3311-15 1/10W 330 ohm
R639 033-5621-15 1/16W 5.6k ohm R670 033-4721-15 1/16W 4.7k ohm R817 119-0000-05 1/10W 0 ohm JW
R640 033-4721-15 1/16W 4.7k ohm R671 032-0140-56 1/10W 12k ohm R818 119-5621-15 1/10W 5.6k ohm
R641 033-1031-15 1/16W 10k ohm R672 119-4721-15 1/10W 4.7k ohm S601 013-6103-00 TACT SWIT
R642 033-1041-15 1/16W 100k ohm R673 033-1031-15 1/16W 10k ohm S602 013-7106-00 DETECTOR
R643 116-1801-15 1/4WS 18 ohm R674 033-1031-15 1/16W 10k ohm S603 013-7206-50 DETECTOR
R644 119-1041-15 1/10W 100k ohm R675 116-1221-15 1/4WS 1.2k ohm SUP1 060-8057-90 CSA20-141N-T
R645 033-4731-15 1/16W 47k ohm R676 119-0000-05 1/10W 0 ohm JW X301 061-3537-90 41.6MHz
R646 119-1031-15 1/10W 10k ohm R677 119-4721-15 1/10W 4.7k ohm X601 060-1533-90 10MHz
R647 116-1591-15 1/4WS 1.5 ohm R685 116-3311-15 1/4WS 330 ohm X602 061-1056-00 32.768KHz
R648 032-0140-89 1/10W 47k ohm R687 119-0000-05 1/10W 0 ohm JW PWB 039-3049-00 PWB(WITHOUT
R649 116-1591-15 1/4WS 1.5 ohm R688 033-1031-15 1/16W 10k ohm COMPONENT)
DXZ775USB/DXZ776USB
-19-
REF No. PART No. DESCRIPTION REF No. PART No. DESCRIPTION REF No. PART No. DESCRIPTION
Q8 125-2041-93 RT1N241M R36 033-1021-15 1/16W 1k ohm R79 033-1051-15 1/16W 1M ohm
Q11 125-2041-93 RT1N241M R37 033-1021-15 1/16W 1k ohm R80 033-1051-15 1/16W 1M ohm
R1 033-5621-15 1/16W 5.6k ohm R39 033-4731-15 1/16W 47k ohm R81 033-4701-15 1/16W 47 ohm
R2 033-1031-15 1/16W 10k ohm R40 033-4731-15 1/16W 47k ohm R82 033-0000-05 0.5A 0 ohm
R3 117-6811-15 1/10W 680k ohm R41 033-6831-15 1/16W 68k ohm R86 033-4731-15 1/16W 47k ohm
R4 033-1041-15 1/16W 100k ohm R42 033-6831-15 1/16W 68k ohm R87 033-4731-15 1/16W 47k ohm
R5 033-1041-15 1/16W 100k ohm R43 033-2211-15 1/16W 220 ohm R88 033-4731-15 1/16W 47k ohm
R6 033-1021-15 1/16W 1k ohm R44 033-0000-05 0.5A 0 ohm R89 033-4731-15 1/16W 47k ohm
R7 117-1001-15 1/10W 10k ohm R45 033-0000-05 0.5A 0 ohm R94 033-1031-15 1/16W 10k ohm
R8 033-0000-05 0.5A 0 ohm R46 033-4731-15 1/16W 47k ohm R95 033-1041-15 1/16W 100k ohm
R9 033-0000-05 0.5A 0 ohm R49 033-0000-05 0.5A 0 ohm R96 033-1531-15 1/16W 15k ohm
R10 033-8231-15 1/16W 82k ohm R51 033-4721-15 1/16W 4.7k ohm R97 033-1531-15 1/16W 15k ohm
R12 033-1531-15 1/16W 15k ohm R52 033-4721-15 1/16W 4.7k ohm R98 033-2701-15 1/16W 27 ohm
R13 033-8231-15 1/16W 82k ohm R53 033-1041-15 1/16W 100k ohm R99 033-2701-15 1/16W 27 ohm
R15 033-2731-15 1/16W 27k ohm R57 033-1041-15 1/16W 100k ohm R101 033-1041-15 1/16W 100k ohm
R16 033-4731-15 1/16W 47k ohm R59 033-4731-15 1/16W 47k ohm R103 033-1031-15 1/16W 10k ohm
R17 033-2731-15 1/16W 27k ohm R60 033-1041-15 1/16W 100k ohm R104 033-0000-05 0.5A 0 ohm
R18 033-2211-15 1/16W 220 ohm R61 033-1041-15 1/16W 100k ohm R110 033-0000-05 0.5A 0 ohm
R19 033-2731-15 1/16W 27k ohm R62 033-4731-15 1/16W 47k ohm R111 033-0000-05 0.5A 0 ohm
R20 033-2731-15 1/16W 27k ohm R63 033-0000-05 0.5A 0 ohm R114 033-1031-15 1/16W 10k ohm
R21 033-2221-15 1/16W 2.2k ohm R64 033-4731-15 1/16W 47k ohm R115 033-1221-15 1/16W 1.2k ohm
R22 033-1051-15 1/16W 1M ohm R65 033-4731-15 1/16W 47k ohm R116 033-0000-05 0.5A 0 ohm
R24 033-2211-15 1/16W 220 ohm R66 033-0000-05 0.5A 0 ohm R117 033-0000-05 0.5A 0 ohm
R25 033-2711-15 1/16W 270 ohm R67 033-0000-05 0.5A 0 ohm R119 033-1041-15 1/16W 100k ohm
R26 033-2711-15 1/16W 270 ohm R68 033-0000-05 0.5A 0 ohm R124 033-4731-15 1/16W 47k ohm
R27 033-4731-15 1/16W 47k ohm R69 033-1041-15 1/16W 100k ohm R126 033-1031-15 1/16W 10k ohm
R28 033-2231-15 1/16W 22k ohm R71 033-2211-15 1/16W 220 ohm TM101 073-0768-90 TERMINAL
R29 033-2231-15 1/16W 22k ohm R72 033-2211-15 1/16W 220 ohm X1 061-3534-90 16.92MHz
R30 033-4731-15 1/16W 47k ohm R74 033-1041-15 1/16W 100k ohm X2 061-3559-90 9MHz
R31 033-3341-15 1/16W 330k ohm R75 033-1041-15 1/16W 100k ohm X4 061-3522-90 32.768KHz
R33 033-5621-15 1/16W 5.6k ohm R76 033-2211-15 1/16W 220 ohm PWB 039-3047-00 PWB(WITHOUT
R35 033-1011-15 1/16W 100 ohm R78 033-2211-15 1/16W 220 ohm COMPONENT)
DXZ775USB/DXZ776USB
-20-
PRINTED WIRING BOARD 1/6 No. Description
Main PWB(B1) section 1/2 RED 1 GND
REAR/RIGHT
BLACK 2 BUS 14V
WHITE
LINE OUT REAR/LEFT
No. Description No. Description
3 L-CH (+)
RED 4 N.C
FRONT/RIGHT GRAY
1 REMOCON 10 S-GND
5 N.C
16P Outlet Socket 2 NC 11 RIGHT NON FADER
PURPLE
WHITE
6 BUS (+)
BLUE/
FRONT/LEFT 13P (Ce-NET)
I J K L M N O P RED 855-5520-56 18P RCA 3 F-GROUND 12 LEFT NON FADER
SUB-WOOFER 7 R-CH (+)
/RIGHT Connector 4 NC 13 S-GND
WHITE 8 R-CH (-)
O N M L K J I SUB-WOOFER 5 NC 14 RIGHT/FRONT 2 13 1
P 9 SYS-ACC
RED
/LEFT
RED 1 3 5 7 9 11 13 15 17 6 S-GND(L) 15 RIGHT/REAR 6 5 4 3
BLACK
AUX IN/RIGHT 10 BUS (-)
H G F E D C B A 7 AUX LEFT 16 S-GND
WHITE 10 9 8 7 11 L-CH (-)
092-2215-50
2 4 6 8 10 12 14 16 18
ANT LEAD
AUX IN/LEFT To J501 of D/D PWB (B3) 8 S-GND(R) 17 LEFT/FRONT 12 11
12 ILLUMI
BLACK
A B C D E F G H
JACK LEAD (page 23) 9 AUX RIGHT 18 LEFT/REAR 13 N.C
IC Q
2 2 13 1
854-6433-50 24
EXTENSION LEAD 1 17 6 5 4 3
1 25 16 1 10 9 8 7
2 18 12 11
15 2
P O N M L K J I
FUSE(15A) 120-0150-00
FUSE(3A) 120-0030-00
H G F E D C B A
BROWN
BLUE
BLUE/WHITE
ORANGE/WHITE
PURPLE/BLACK
GREEN/BLACK
GRAY/BLACK
1
WHITE/BLACK
PURPLE
GREEN
WHITE
GRAY
1
73
109
76 1
1
J101
1
EXTENSION-LEAD CONNECTOR
Port No. Description LINE COLOR
A SP R/L GREEN 37
YELLOW
YELLOW
51
BLACK
B SP F/L WHITE/BLACK
1 1
RED
C SP F/L WHITE 26
D SP F/R GRAY
E SP F/R GRAY/BLACK
F SP R/R PURPLE
15
G SP R/R PURPLE/BLACK
H B/U YELLOW
I SP R/L GREEN/BLACK
J PHONE INT BROWN
K ACC RED
L AUTO ANT BLUE
M REMOTE BLUE/WHITE
N ILLUMI ORANGE/WHITE 17
O BUS 14V YELLOW 1
P GND BLACK
816-4026-50
FLAT WIRE
1
COMPONENT SIDE 51
76
26
Inner ES FPC(B6)
039-2409-05 1
29
1 16
J1000
DXZ775USB/DXZ776USB
-21-
PRINTED WIRING BOARD 2/6
Main PWB(B1) section 2/2
SOLDER SIDE
Caution:
SOLDER SIDE: Parts on the solder side seen The parts of a dotted line express the parts on a component side.
from the solder side are indicated.
1 13 2 2
16
3 4 5 6 17 1
7 8 9 10 2 16 15 1
18 2
11 12 1 15
I J K L M N O P
A B C D E F G H
17
1
(PE-2899K-A/B)
(PE-2899B-A)
29
18 1
DXZ775USB/DXZ776USB
-22-
PRINTED WIRING BOARD 3/6 PRINTED WIRING BOARD 4/6
Switch PWB(B2) section D/D PWB(B3) section
COMPONENT SIDE SOLDER SIDE
COMPONENT SIDE
Caution:
COMPONENT SIDE: Parts on the component side seen
from the component side are indicated.
14
51
76
2 16
26
1 15
1
Q
To J606 of Main PWB(B1) (page 21)
IC
21
COMPONENT SIDE: Parts on the component side seen
1
SOLDER SIDE: Parts on the solder side seen
1 15
TO LCD 379-1381-81
2 16
from the component side are indicated.
16
Caution:
Caution:
PWB(B1) (page 21)
To J602 of Main
Inner ES FPC(B6)
039-2409-05
SOLDER SIDE
Caution:
1
SOLDER SIDE: Parts on the solder side seen
from the solder side are indicated.
DXZ775USB/DXZ776USB
-23-
PRINTED WIRING BOARD 5/6 CIRCUIT DIAGRAM 1/8
MECH PWB(B4) section Caution: USB CONNECTOR D/D PWB(B3) section To J606 of Main PWB(B1) (page 25)
855-0613-51
USB CABLE
22 15
1 8
F-GND 5
1 GND
29 D+
26 D-
VCC 1
5 5
51 1
1
76
51
76
26
1
COMPONENT SIDE
SOLDER SIDE
1
17
1 10
29
BLU
YEL
RED(+)
PWB(B5)-A SENSOR PWB(B5)-B
RED
PUR
BLU
BLK
YEL
SENSOR PWB(B5)-A
M SPINDLE MOTOR ASSY
(SMA-182-100)
DXZ775USB/DXZ776USB
-24-
To 4/4 To 2/4 To 2/4
To P701 of Switch PWB(B2)(page 29) (page 28) (page 26) To 3/4(page 27) (page 26)
To 4/4
To 3/4
connect with Inner ES FPC(B6)039-2409-05
(page 28)
(page 27)
To 2/4(page 26)
To 3/4(page 27)
To 4/4(page 28)
Main PWB(B1) section 1/4
CIRCUIT DIAGRAM 3/8
-25-
(PE-2899B-A)
(PE-2899K-A/B)
DXZ775USB/DXZ776USB
To J501 of D/D PWB (B3)(page 24)
TEL OFF:0
TEL ON:3.3
POWER ON:3.2
POWER OFF:0
TUNER ON:3.2
TUNER OFF:0
Description
To 3/4(page 27)
To 4/4(page 28)
To 1/4(page 25)
To 1/4(page 25)
To 4/4(page 28)
To 1/4(page 25)
DXZ775USB/DXZ776USB
-26-
CIRCUIT DIAGRAM 5/8
Main PWB(B1) section 3/4
To 2/4(page 26)
To 4/4(page 28)
x4
x4
x4
x4
x4
x4
To 1/4(page 25)
(page 25)
To 1/4
To 4/4(page 28)
To 2/4(page 26)
DXZ775USB/DXZ776USB
-27-
CIRCUIT DIAGRAM 6/8
Main PWB(B1) section 4/4
To 1/4(page 25)
To 3/4(page 27)
To 2/4(page 26)
To 1/4(page 25)
I A
TUNER ON:14
TUNER OFF:0
To 1/4(page 25)
POWER ON:14
POWER OFF:0
P H
To 2/4(page 26)
DXZ775USB/DXZ776USB
To 3/4(page 27) -28-
CIRCUIT DIAGRAM 7/8
Switch PWB(B2) section
TO LCD 379-1381-81
To PICK UP ASSY
-30-
x4
x4
DXZ775USB/DXZ776USB
x4
x4
x4
x4
-TR
PWR
x4
x4
To USB