Documente Academic
Documente Profesional
Documente Cultură
Session 2020
Promotion Monsieur Bernard BURBAN
SOUDAGE
Code d’inscription à la spécialité :
254-05
Merci de consulter régulièrement le site internet pour consulter des éventuelles modifications des sujets
Page 1 sur 9
CONSIGNES DE SECURITÉ PORTEES A LA CONNAISSANCE DES CANDIDATS
AVANT L’ÉPREUVE
AUTRE DOCUMENT :
Page 2 sur 9
CONCOURS UN DES MEILLEURS APPRENTIS DE FRANCE 2020
3 /9
CONCOURS UN DES MEILLEURS APPRENTIS DE FRANCE 2020
4 /9
CONCOURS UN DES MEILLEURS APPRENTIS DE FRANCE 2020
TEXTE DU SUJET
L’œuvre sera jugée principalement sur la qualité des soudures mais également sur le
respect des tolérances géométriques et sur l’esthétisme global.
CACCIOPPOLI Michel
michel.caccioppoli@hotmail.com
Tel : 09 53 09 36 93
Mobile : 06 47 32 67 39
5 /9
CONCOURS UN DES MEILLEURS APPRENTIS DE FRANCE 2020
PLANS A4
6 /9
CONCOURS UN DES MEILLEURS APPRENTIS DE FRANCE 2020
Afin de respecter la tolérance sur la longueur totale, il est recommandé d’ajuster la longueur du tube acier
inoxydable (référence plan ST1174475) en fonction des longueurs réelles des cônes et du fond bombé
(référence plan : ST1180270, ST1174489, ST1180269, ST1174541).
Adapter les épaisseurs et diamètres des composants afin de respecter les défauts d’alignement maximum
admissibles selon le niveau C de la norme ISO 5817.
Procédure de soudage
L’assemblage des différents composants sera réalisé conformément aux indications suivantes :
- Les positions de soudage sont données selon ISO 6947 Soudage et techniques connexes -- Positions de
soudage.
- Les procédés de soudage sont donnés selon ISO 4063 Soudage et techniques connexes --
Nomenclature et numérotation des procédés.
7 /9
CONCOURS UN DES MEILLEURS APPRENTIS DE FRANCE 2020
Le niveau de qualité requis est le niveau C selon ISO 5817 Soudage -- Assemblages en acier, nickel, titane et leurs
alliages soudés par fusion (soudage par faisceau exclu) -- Niveaux de qualité par rapport aux défauts
Les soudures devront être brossées, tout autre parachèvement (meulage, sablage, etc.) est non autorisé
8 /9
CONCOURS UN DES MEILLEURS APPRENTIS DE FRANCE 2020
TABLEAU D’EVALUATION
Numéro du candidat :
/200
TOTAL
9 /9
q
A-A
1:2
o
114.3
3 A 3 B
A Centre de la première soudure S6
S2
141 + 135
107.9
S5 S9
S1 n
3 2x30 (40)
141
3 2x30 (40) 141 + 111
141 + 135
114.3
S6
Z3 6x30 (53) m
141
( 381 )
139.7
168.3
219.1
S7 S7
3 2x30 (40) 3 2x30 (40)
141 l
( 40 )
( 40 )
3 2x30 (40) 141
3 2x30 (40)
( 184.6 )
S9
3 2x30 (40)
141 S4 S3
( 75 )
3 2x30 (40) k
3 3
141 135
A
(2x) 20
4CZ A
(4x) 15
A
i
B
( 369.2 )
( 184.3 )
45 S8
45
3 2x30 (40)
111
3 2x30 (40)
( 111.3 )
f
S8
e
3 2x30 (40)
111
3 2x30 (40)
Steel EN S235JRH
01 1
6 9 Tube Ø219.1
ST1174462 (1.0039)
Réduction concentri. 219.1x168.3 Steel EN S235JRH
02 1
EN 10253-1 forme1 ST1180270 (1.0039) c
EN 1.4306
03 1 Tube rond Ø114.3
ST1174475 (St. Steel 304L)
EN 1.4306
04 1 Réduction droite Ø139.7x114.3 L76
ST1174489 (St. Steel 304L)
EN 1.4306
05 1 Fond Elliptique NFE 81-103 Ø168.3
ST1174541 (St. Steel 304L)
4
06 1 Kiosque
ST1174564 b
EN 1.4306
07 2
5 Barre de plongée avant
ST1174578 (St. Steel 304L)
EN 1.4306
08 1 Gouvernail bas
ST1174597 (St. Steel 304L)
EN 1.4306
09 3
This drawing may not be used for commercial purposes without written authorisation
EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH
Gouvernail supérieur
Ce dessin ne peut etre utilise a des fins commerciales sans autorisation ecrite
APPROVED 1:1
DESIGNED
23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
TB v2.0 A0:Landscape
3
1
.
e
9
1
2
6x
40
d
400
Steel EN S235JRH
(1.0039)
ISO GPS STANDARDS
This drawing may not be used for commercial purposes without written authorisation
EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH
Ce dessin ne peut etre utilise a des fins commerciales sans autorisation ecrite
-0.3 +0.3
ISO 2768-mK Ra 1.6 ISO 13715
ORGANISATION EUROPEENNE POUR
LA RECHERCHE NUCLEAIRE
Unless otherwise mentioned, applicable ISO GPS standards are those prior to 2010-08-01 regardless of the drawing date
a
GENEVE
MASS 5.81 kg WHERE USED Not Applicable [Last checked at 2019-08-02 13:31]
APPROVED 1:1
DESIGNED
EQUIPMENT CODE 2019-08-02
REFERENCES Doc No: ST1174462_02 INDEX LABEL QAC SHEET
CERN
ST1174462 1/1
CERN
3
10
d
219.1
Ø 168.3
c
A-A
b
Ce dessin ne peut etre utilise a des fins commerciales sans autorisation ecrite
-0.3 +0.3
ISO 2768-mK Ra 1.6 ISO 13715
ORGANISATION EUROPEENNE POUR
LA RECHERCHE NUCLEAIRE
Unless otherwise mentioned, applicable ISO GPS standards are those prior to 2010-08-01 regardless of the drawing date
a
GENEVE
MASS 3.22 kg WHERE USED Not Applicable [Last checked at 2019-08-02 13:25]
APPROVED 1:1
DESIGNED
EQUIPMENT CODE 2019-08-02
REFERENCES Doc No: ST1180270_02 INDEX LABEL QAC SHEET
CERN
ST1180270 1/1
CERN
3
3
.
4
1
1
EN 1.4306
(St. Steel 304L)
ISO GPS STANDARDS
This drawing may not be used for commercial purposes without written authorisation
EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH
Ce dessin ne peut etre utilise a des fins commerciales sans autorisation ecrite
-0.3 +0.3
ISO 2768-mK Ra 1.6 ISO 13715
ORGANISATION EUROPEENNE POUR
LA RECHERCHE NUCLEAIRE
Unless otherwise mentioned, applicable ISO GPS standards are those prior to 2010-08-01 regardless of the drawing date
a
GENEVE
MASS 1.66 kg WHERE USED Not Applicable [Last checked at 2019-08-07 10:15]
APPROVED 1:1
DESIGNED
EQUIPMENT CODE 2019-08-07
REFERENCES Doc No: ST1174475_02 INDEX LABEL QAC SHEET
CERN
ST1174475 1/1
CERN
3
e
d
Ø 139.7
Ø 114.3
c
A
A-A MATERIAL INITIAL STATE FINAL STATE
b
1:1 EN 1.4306
(St. Steel 304L)
ISO GPS STANDARDS
This drawing may not be used for commercial purposes without written authorisation
EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH
Ce dessin ne peut etre utilise a des fins commerciales sans autorisation ecrite
-0.3 +0.3
ISO 2768-mK Ra 1.6 ISO 13715
ORGANISATION EUROPEENNE POUR
LA RECHERCHE NUCLEAIRE
Unless otherwise mentioned, applicable ISO GPS standards are those prior to 2010-08-01 regardless of the drawing date
a
GENEVE
MASS 711 g WHERE USED Not Applicable [Last checked at 2019-08-02 16:17]
APPROVED 1:1
DESIGNED
EQUIPMENT CODE 2019-08-02
REFERENCES Doc No: ST1174489_02 INDEX LABEL QAC SHEET
CERN
ST1174489 1/1
CERN
3
8.
16
d
A-A
1:2 3
EN 1.4306
(St. Steel 304L)
ISO GPS STANDARDS
This drawing may not be used for commercial purposes without written authorisation
EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH
Ce dessin ne peut etre utilise a des fins commerciales sans autorisation ecrite
-0.3 +0.3
ISO 2768-mK Ra 1.6 ISO 13715
ORGANISATION EUROPEENNE POUR
LA RECHERCHE NUCLEAIRE
Unless otherwise mentioned, applicable ISO GPS standards are those prior to 2010-08-01 regardless of the drawing date
a
GENEVE
MASS 781 g WHERE USED Not Applicable [Last checked at 2019-08-02 18:13]
APPROVED 1:1
DESIGNED
EQUIPMENT CODE 2019-08-02
REFERENCES Doc No: ST1174541_02 INDEX LABEL QAC SHEET
CERN
ST1174541
1/1
CERN
(
5
R
20 20
.1
5
e
7
5 7
.
) R
1
3 (
5
(
( 103.2 )
46
d
±2
70
R 109
1
141
114.3 ±1
c
4
S10
1.5 3 1
141
1.5
BILL OF MATERIALS
EN 1.4306
EDH SCEM
b
01 2 Demi tube Ø114.3
ST1174548 (St. Steel 304L)
S10 02 2
EN 1.4306
Plaque latérale Kiosque
ST1174552 (St. Steel 304L)
1.5
141 03 3
EN 1.4306
This drawing may not be used for commercial purposes without written authorisation
EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH
EN 1.4306
2 04 2
LA RECHERCHE NUCLEAIRE
141
1.5 2 1.5
DESIGNATION DESIGNED L.PREVER-LOIRI FORMAT
APPROVED 1:1
DESIGNED
EQUIPMENT CODE 2019-08-07
REFERENCES Doc No: ST1174564_02 INDEX LABEL QAC SHEET
CERN
ST1174564 1/1
CERN
3
20
R
R1
0
150
130
70
68.6
100
EN 1.4306
(St. Steel 304L)
ISO GPS STANDARDS
This drawing may not be used for commercial purposes without written authorisation
EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH
Ce dessin ne peut etre utilise a des fins commerciales sans autorisation ecrite
-0.3 +0.3
ISO 2768-mK Ra 1.6 ISO 13715
ORGANISATION EUROPEENNE POUR
LA RECHERCHE NUCLEAIRE
Unless otherwise mentioned, applicable ISO GPS standards are those prior to 2010-08-01 regardless of the drawing date
GENEVE
MASS 257 g WHERE USED Not Applicable [Last checked at 2019-08-07 10:16]
APPROVED 1:1
DESIGNED
EQUIPMENT CODE 2019-08-07
REFERENCES Doc No: ST1174578_02 INDEX LABEL QAC SHEET
CERN
ST1174578 1/1
CERN
3
R
10
0
2
R
127.4
117.4
101.2
.5
63
72.9
100
EN 1.4306
(St. Steel 304L)
ISO GPS STANDARDS
This drawing may not be used for commercial purposes without written authorisation
EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH
Ce dessin ne peut etre utilise a des fins commerciales sans autorisation ecrite
-0.3 +0.3
ISO 2768-mK Ra 1.6 ISO 13715
ORGANISATION EUROPEENNE POUR
LA RECHERCHE NUCLEAIRE
Unless otherwise mentioned, applicable ISO GPS standards are those prior to 2010-08-01 regardless of the drawing date
GENEVE
MASS 202 g WHERE USED Not Applicable [Last checked at 2019-08-02 16:00]
APPROVED 1:1
DESIGNED
EQUIPMENT CODE 2019-08-02
REFERENCES Doc No: ST1174597_02 INDEX LABEL QAC SHEET
CERN
ST1174597 1/1
CERN
0
R
R2
1
0
70
60
50
60
48
EN 1.4306
(St. Steel 304L)
ISO GPS STANDARDS
This drawing may not be used for commercial purposes without written authorisation
EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH
Ce dessin ne peut etre utilise a des fins commerciales sans autorisation ecrite
-0.3 +0.3
ISO 2768-mK Ra 1.6 ISO 13715
ORGANISATION EUROPEENNE POUR
LA RECHERCHE NUCLEAIRE
Unless otherwise mentioned, applicable ISO GPS standards are those prior to 2010-08-01 regardless of the drawing date
GENEVE
MASS 131 g WHERE USED Not Applicable [Last checked at 2019-08-02 15:54]
APPROVED 1:1
DESIGNED
EQUIPMENT CODE 2019-08-02
REFERENCES Doc No: ST1174619_02 INDEX LABEL QAC SHEET
CERN
ST1174619 1/1
CERN
10
3
d
219.1
Ø 114.3
c
A
A-A b
1:2 MATERIAL
Steel EN S235JRH
INITIAL STATE FINAL STATE
(1.0039)
ISO GPS STANDARDS
This drawing may not be used for commercial purposes without written authorisation
EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH
Ce dessin ne peut etre utilise a des fins commerciales sans autorisation ecrite
-0.3 +0.3
ISO 2768-mK Ra 1.6 ISO 13715
ORGANISATION EUROPEENNE POUR
LA RECHERCHE NUCLEAIRE
Unless otherwise mentioned, applicable ISO GPS standards are those prior to 2010-08-01 regardless of the drawing date
a
GENEVE
MASS 5.44 kg WHERE USED Not Applicable [Last checked at 2019-08-02 11:34]
APPROVED 1:1
DESIGNED
EQUIPMENT CODE 2019-08-02
REFERENCES Doc No: ST1180269_02 INDEX LABEL QAC SHEET
CERN
ST1180269 1/1
CERN
114
.3
EN 1.4306
(St. Steel 304L)
ISO GPS STANDARDS
This drawing may not be used for commercial purposes without written authorisation
EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH
Ce dessin ne peut etre utilise a des fins commerciales sans autorisation ecrite
-0.3 +0.3
ISO 2768-mK Ra 1.6 ISO 13715
ORGANISATION EUROPEENNE POUR
LA RECHERCHE NUCLEAIRE
Unless otherwise mentioned, applicable ISO GPS standards are those prior to 2010-08-01 regardless of the drawing date
GENEVE
MASS 20.7 g WHERE USED Not Applicable [Last checked at 2019-08-07 14:38]
APPROVED 1:1
DESIGNED
EQUIPMENT CODE 2019-08-07
REFERENCES Doc No: ST1180473_02 INDEX LABEL QAC SHEET
CERN
ST1180473 1/1
CERN
70
EN 1.4306
(St. Steel 304L)
ISO GPS STANDARDS
This drawing may not be used for commercial purposes without written authorisation
EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH
Ce dessin ne peut etre utilise a des fins commerciales sans autorisation ecrite
-0.3 +0.3
ISO 2768-mK Ra 1.6 ISO 13715
ORGANISATION EUROPEENNE POUR
LA RECHERCHE NUCLEAIRE
Unless otherwise mentioned, applicable ISO GPS standards are those prior to 2010-08-01 regardless of the drawing date
GENEVE
MASS 74.8 g WHERE USED Not Applicable [Last checked at 2019-08-02 16:07]
APPROVED 1:1
DESIGNED
EQUIPMENT CODE 2019-08-02
REFERENCES Doc No: ST1174552_02 INDEX LABEL QAC SHEET
CERN
ST1174552 1/1
CERN
EN 1.4306
(St. Steel 304L)
ISO GPS STANDARDS
This drawing may not be used for commercial purposes without written authorisation
EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH
Ce dessin ne peut etre utilise a des fins commerciales sans autorisation ecrite
-0.3 +0.3
ISO 2768-mK Ra 1.6 ISO 13715
ORGANISATION EUROPEENNE POUR
LA RECHERCHE NUCLEAIRE
Unless otherwise mentioned, applicable ISO GPS standards are those prior to 2010-08-01 regardless of the drawing date
GENEVE
MASS 41.4 g WHERE USED Not Applicable [Last checked at 2019-08-07 14:40]
APPROVED 1:1
DESIGNED
EQUIPMENT CODE 2019-08-07
REFERENCES Doc No: ST1174569_02 INDEX LABEL QAC SHEET
CERN
ST1174569 1/1
CERN
R
57
.1
5
30
(3)
46
R1
09
.5
5
EN 1.4306
(St. Steel 304L)
ISO GPS STANDARDS
This drawing may not be used for commercial purposes without written authorisation
EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH
Ce dessin ne peut etre utilise a des fins commerciales sans autorisation ecrite
-0.3 +0.3
ISO 2768-mK Ra 1.6 ISO 13715
ORGANISATION EUROPEENNE POUR
LA RECHERCHE NUCLEAIRE
Unless otherwise mentioned, applicable ISO GPS standards are those prior to 2010-08-01 regardless of the drawing date
GENEVE
MASS 155 g WHERE USED Not Applicable [Last checked at 2019-08-02 16:10]
APPROVED 1:1
DESIGNED
EQUIPMENT CODE 2019-08-02
REFERENCES Doc No: ST1174548_02 INDEX LABEL QAC SHEET
CERN
ST1174548 1/1
CERN