Documente Academic
Documente Profesional
Documente Cultură
Below is an article focused on important considerations and strategies that can make
resistance band training a viable option in a pinch, while helping to still provide a
relatively solid workout you can achieve virtually anywhere.
Ideal Uses for Resistance Bands
As mentioned above, resistance bands can be helpful, but only in certain situations.
Although resistance bands (RBs for the sake of brevity in this article) tend to get a bad
rap from experienced athletes, the major drawback from them is arguably not so much
in their use, but in their overuse. It’s possible to get a solid workout through a variety
of methods. It’s just important to realize what’s most optimal in our long-term
approach to our physique goals. Trying to use RBs as a substitute for our normal free
weight and machine-based training programs is a sure way to greatly limit progress,
but using them in a pinch can be a lot more helpful than completely skipping our
workouts when times get busy.
That preface out of the way, there are some situations we’ll likely all face at some
point or another, when having a quality set of RBs along with a plan to most
effectively use them, can be a lifesaver… well more like a gainz saver.
Traveling
Now yes, if you’re traveling, the ideal situation would be to visit local gyms, pay a
guest pass and get in at least a few of your normal sessions each week you’re away.
However, sometimes visiting local gyms isn’t an option. Whether it’s because you’re
on a huge vacation you want to make the most of, are looking to minimize
unrealistically high guest pass fees, or business trips don’t allow for sufficient time to
visit gyms, RBs can help fill in the gaps.
Work Obligations
All or nothing mindsets have ruined many a person’s long-term health and physique
progress. Although not ideal, missing gym sessions for the sake of work obligations
happens. The danger isn’t the occasionally missed session, but the habit that skipping
sessions can create if we’re not careful. Having a quality set of RBs on hand, along
with a backup routine in mind, can go a long way in at least keeping us in the groove
and making some progress rather than completely forsaking workouts and making no
progress at all.
The Cons
So we’ve established that sometimes, having RBs as a backup plan can be helpful.
That being said, it’s not enough to just say, “Use resistance bands when time is
limited” and call it a day. RBs do have some downsides that we want to accommodate
for as best we can to help get the most of the sessions.
Accommodating Resistance
Related in part to the above mention of the eccentric phase, another drawback is just
the accommodating resistance in general that accompanies RB use. Similar to the
principle of using chains attached to barbells, resistance bands are going to offer the
most resistance at the end of each rep, and much less near the beginning. That of
course means more total work being performed in some lever angles than others.
Keeping this in mind when adjusting your total resistance and implementing
considerations covered later in this article can help navigate around these issues to
create sufficient, total work during RB exercises.
The Pros
As you’ve already gathered on your own and in this article, the main plus to using
resistance bands is just the time they can save when unable to reach the gym, and their
ability to help us get some workouts in even if we can’t accomplish our typical, ideal
workouts.
This section is short, and for good reason. RBs can be great for a back up plan, but
should certainly never be confused as being just as good as traditional weight lifting.
Anyone serious about long-term, significant physique development is going to require
otherwise consistent time spent performing traditional weight lifting, getting
progressively stronger, and performing a variety of foundational movement patterns to
optimize strength and muscle size improvements.
Upper Body Considerations
I’m listing considerations specific to upper body training with RBs since, as you’ll see
later in this article, I believe lower body training requires quite a different approach.
When it comes to RBs, upper body training can be a bit easier to get creative with and
find exercises to train most muscle groups.
High Repetitions
It almost goes without saying, but going very heavy with resistance bands is pretty
darn difficult. Due to the general instability bands have compared to free weights or
machines, and to the limitations in resistance on the bands themselves (even when
combined with other bands), it’s just much easier and productive to focus on higher
rep sets.
Just like adding in some high rep sets in our traditional weight lifting sessions can
give us a break from our very heavy, taxing sets and help stimulate muscle fibers
through a different avenue, having to use high reps with RB sessions isn’t necessarily
something to begrudge. Running sets of anywhere from 10-30+ reps can be a valid
approach to making your RB sessions challenging.
Contraction Time
Between the accommodating resistance mentioned previously, and the reduced ability
to progressively go heavier with RBs, playing with the contraction duration can be a
helpful intensity technique to keep in mind. Compared to our typical ~1 second
squeeze at the top of a bicep curl for example, increasing that squeeze to 2-4 seconds
can increase intensity. One bright side I like to consider during sessions I’m using
RBs is that I can really focus on squeezing the target muscle and improving my ability
to really activate the muscle to full contraction. Basically, working in different
contraction durations can at least help us with that mind muscle connection even if we
aren’t lifting heavy weight, as we would prefer