Documente Academic
Documente Profesional
Documente Cultură
DVH
S5
OO pmax: 100 bar abs; tmax: 400 °C
OO Connection: ANSI ½" ... ANSI 8",
DN 15 ... DN 200
OO Material: stainless steel
OO utput: 4 - 20 mA, HART® Protocol,
O
Modbus
OO Sensor design without sealing
OOIntegrated temperature and
pressure measurement
OOMeasurement of mass
and density possible
OO ATEX, IECEx
OO Energy consumption (monitoring)
www.kobold.com
1
Vortex Flowmeter Model DVH
Technical Details
Mass flow rate accuracy: for gas and steam based on
Velocity
Geschwindigkeits-
sensor sensor
Vortices
Wirbel 50-100% of pressure range
Bluff body
Staukörper
Model DVH accuracy
Process variables Liquids Gas/steam
Volumetric flow ± 0.7% of rate ± 1% of rate
Flow
Durchfluss rate
Constant Wirbel-Abstand
Konstanter wave length Mass flow rate ± 1% of rate ± 1.5% of rate
Temperature ± 1 °C ; (± 2 °F) ± 1 °C ; (± 2 °F)
The measuring principle is based on the Kármán vortice Pressure ± 0.3% of full scale ± 0.3% of full scale
street. A specially shaped bluff body is located in direction
of the flow. From a certain flow velocity on vortices are Density ± 0.3% of reading ± 0.5% of reading
generated through the bluff body. Repeatability
This small vortices generate small pressure differences which Mass flow rate: ± 0.2% of rate
are sensed from a piezoelectric sensor behind. Volumetric
The number of vortices is directly proportional to the flow Flow rate: ± 0.1% of rate
velocity and will be provided to an evaluating electronic. Temperature: ± 0.1 °C, (± 0.2 °F)
Pressure: ± 0.5% of full scale
Density: ± 0.1% of reading
1/01 - 2019
Turndown:
(Turndown is application dependent, can exceed 100:1)
Turndown (continued):
(Turndown is application dependent, can exceed 100:1)
Size Ødi ØDa H Weight Nominal size (Pressure range see model code)
[mm] [mm] [mm] [kg] DIN EN 1092-1 ASME B16.5
W1 13.8 35 341 4.8 DN 15 ½"
W2 18.8 43 343 5.0 DN 20 ¾"
W3 24.3 50.8 346 5.2 DN 25 1"
W4 38.1 73.1 353 5.9 DN 40 1½"
W5 49.3 92 358 6.7 DN 50 2"
W6 73.7 127 375 9.0 DN 80 3"
W7 97.2 157.3 387 11.0 DN 100 4"
1/01 - 2019
Dimensions and weight for wafer style with remote mount transmitter
Size Ødi ØDa H Weight Nominal size (Pressure range see model code)
[mm] [mm] [mm] [kg] DIN EN 1092-1 ASME B16.5
W1 13.8 35 341 3.9 DN 15 ½"
W2 18.8 43 343 4.1 DN 20 ¾"
W3 24.3 50.8 346 4.2 DN 25 1"
W4 38.1 73.1 353 4.9 DN 40 1½"
W5 49.3 92 358 5.7 DN 50 2"
W6 73.7 127 375 7.9 DN 80 3"
W7 97.2 157.3 387 10.0 DN 100 4"
1/01 - 2019