Documente Academic
Documente Profesional
Documente Cultură
"Fav. Subject?
3) They showed a bearing and ask me to tell its type and problem with it.
Nozzle bnao
Cd nozzle mein back pressure reduce krtey jao to kiya hota hai
Label kro
Ye sub lines kiya kiya hain
Saturation curve k left half ko kiya kehtey hain aur right half ko kiya kehtey hain
Aik pump ki isentropic efficiency 80 percent hai aur wo enthalpy 20 increase krta
hai at 100 percent efficiency to 80 percent pr kitni krey ga
Reynold number
Drawings views
3 views of object
Rankine cycle
-----------Interview Questions---------
Technical:
Technical Interview
The interview panel comprised of Dr. Javed Hyder (Former Dean of Engineering), Dr.
Rizwan Alim Mufti (Head DME) and a delegate from KINPOE. Being a graduate of PIEAS,
I had a fair idea of the kind of questions i would be asked because I was familiar
with the major fields of the interviewers. I would like to pass on that advantage
to those who havent experienced such interviews.
Dr. Javed Hyder is one of the most knowledgeable faculty members in PEAS and has
been ranked in the top Mechanical Engineers in Pakistan for his research index. He
teaches many courses to BS students which include Thermodynamics, Internal
Combustion Engines, Computational and Finite Element Analysis, Machine Design and
Refrigeration. So expect alot of questions from these fields. You dont have to go
into the details because the questions are generally very basic. Do prepare the
Engine cycles (Otto, Gasoline, Diesel etc) , Refrigeration and power plant cycles
realy well. You should have these graphs on your finger tips.
Dr. Rizwan Alim Mufti is the Head of Mechanical Engineering Department and is
specialised in practical courses including Manufacturing Processes and Machining.
He also has admirable knowledge in Engines and Engineering Drawing. Expect lots of
questions from Machining processes.
Experience:
Name?
University?
Favourite courses of BS?
What subjects did i prepare? (They basically asked particularly from those)
I was asked about how to find pressure from a manometer.
I was asked to find pressure on a rock in a beaker
I was asked to draw Otto , Diesel, Gasoline cycle.
I was then asked to draw and explain Rankine cycle.
I was then asked to Draw and explain the 4 strokes of Gasoline engine.
Difference bet SI and CI Engines?
I was asked about lathe and Milling Machine?
What is broaching?
I was given an object and told to justify it in minimum views.
I was asked about types of welding.
Name
University
Which subject you prepare.?
I said power plant, macine design, thermodynamics, refrigeration. Ic engine.
Which theories you aplply in machine design?
Lets this is table and load is applied on table on one leg . Which theory you will
apply?
Draw thermal power plant diagram and explan?
What is critical point. Tripple point. Sublimation.?
How can rankine cycle effeciency increase? What will be effect of a bigger pump
than usual?
Draw stress strain diagram and explain. Is it engineering diagram or true ? What
will be true diagram
Abdullah Toufique(contributor)
Mechanical Interview.
Technical : Panel of 3
Intro.
Fav. subjects (I told them 3, they asked aur koi and then kud he unhn nay 2
subjects k naam liay k is it okay)
Showed a load magnitude vs time graph and ask me to explain fatigue creep in
it.Questions about creep.
Stress strain graph of mild steel and aluminium.
Properties of Al.
Free Expansion process? what happens it it.
Mass spring system equation,its natural frequency formula,degree of freedom etc.
MS Mechanical interview
Techncial
bike ap use krte hn us mein....aik coil use hoti ha...uska kaya function hota ha?
when igtion hoti ha..tw uske lye aik time set kya hta ha...ignition timing ko kam
ya zyada krna ho tw kaya kren ge.?
-----------Interview Questions---------
Technical:
-----------Interview Questions---------
Technical:
G tu aap kya parh k aye hain?
ok beta aap ye sab tu jaanty hain inhy side pe rakho aur Design ki tarf aao