Documente Academic
Documente Profesional
Documente Cultură
—2—
Step Four Inserting the Remote Control Batteries Step Five Connecting to Your TV Set
Disconnect the aerial cable from your TV set. Connect it to
1. Remove the battery compartment cover by sliding the
cover in the direction of the arrow.
1. the UHF/VHF IN connector on the DVD Recorder.
S-video connection
3. Connect the S-video cable to the S-VIDEO OUT connector
on the DVD Recorder. Connect the other end to the TV set.
Connect the audio cables (red/white of composite AV cable)
to the 5.1 CH (1. FRONT L/R) connectors on the DVD
Insert the supplied batteries taking note of the correct
2. polarity (+/-).
Recorder. Connect the other ends to the the audio-in
connectors on the TV set.
Composite video connection
Connect the yellow plug of the composite AV cable to the
VIDEO OUT connector on the DVD Recorder.
Connect the red and white plugs to the 5.1 CH (1. FRONT
L/R) connectors on the DVD Recorder.
Connect the other end of the cable to the video/audio-in
connectors on the TV set.
Component video connection
Connect the component video cable to the Y/Pb/Pr
3. Replace the cover. connectors on the DVD Recorder matching the colors.
Connect the other end to the Y/Pb/Pr connectors on your TV
Caution: set.
1. Only use AAA batteries. Connect the red and white plugs of the composite AV cable
2. Dispose of used batteries according to local ordinance to the 5.1 CH (1. FRONT L/R) connectors on the DVD
regulations. Recorder.
3. Remove the batteries when not using the DVD Recorder for Connect the other end of the cable to the the video/audio-in
prolonged periods. connectors on the TV set.
—3—
(The LANGUAGE option is already selected.) Press
Step Six Initial Setup
2. ENTER.
You will need the remote control to confirm settings for this section. (The OSD option is already selected.) Press ENTER.
Selected items are highlighted yellow. 3.
Press PAGE UP /PAGE DOWN to select the desired
1. Turn on the TV set. 4. language.
Press ENTER to confirm.
Turn on the DVD Recorder.
2. Press LEFT to return to LANGUAGE options.
The “initial setup” screen appears automatically. 5.
3. Press PAGE UP/PAGE DOWN to select MENU. Press
Press ENTER. 6. ENTER.
4.
Press LEFT /RIGHT to select the signal type. Press PAGE UP /PAGE DOWN to select the desired
5. 7. language.
Press ENTER to confirm.
6. 8. Repeat the above steps to set the language for AUDIO and
SUBTITLES.
The DVD Recorder searches for available channels.
7. Step Eight Playing Discs
When channel searching is done, press LEFT .
8. The following discs can be played on the DVD Recorder:
The Setting Date and Time screen appears. — DVD — DVD-R Video Mode
The default language for the OSD interface is English. This section
describes how to set the language to your preference. Press OPEN/CLOSE on the DVD Recorder.
Press SETUP. The SETUP menu opens.
1. The disc tray opens.
1.
Insert the disc into the tray with the label side facing up.
2.
—4—
Press OPEN/CLOSE on the DVD Recorder.
3. The disc tray closes. Step Ten Using One Touch Recording (OTR)
The system searches the disc. One Touch Recording lets you do just what the name suggests—record
4. at the touch of a button.
Tip!
The Thumbnail Icon screen opens. Have a blank DVD+RW disc in the tray when watching TV. Quickly
5. press REC to record live events or your favorite sports scene on
Press PAGE UP /PAGE DOWN to move to the next the spot.
chapter.
Press TV/DVD if you are recording from your TV set.
Press ENTER to play the selection. 1.
Press SOURCE if you are recording from another device.
Step Nine Setting the recording quality Keep pressing SOURCE until the device is selected.
The higher the recording quality you choose the less recording time per Press REC.
disc. The following recording qualities are supported: 2.
— HQ (high quality) 60 minutes Press STOP to finish recording.
— SP (standard play) 120 minutes
3.
— LP (long play) 180 minutes Press TV/DVD to view the new recording.
4.
— EP (extended play) 240 minutes The Thumbnail Icon screen opens.
— SLP (standard long play 360 minutes
Use PAGE UP /PAGE DOWN to scroll to the new
5. recording.
To set the recording quality:
Press PLAY to start playback.
Press QUALITY until you get to the setting you HQ 6.
want.
The current setting is shown in the upper-right
corner of the TV set.
—5—
Step Eleven Erasing recordings Step Thirteen Finalizing Discs
To finalize DVD+R discs refer to the following:
To erase Titles or Chapters refer to the following:
Press TV/DVD.
1. Press TV/DVD. 1.
The Thumbnail Icon screen opens.
The Thumbnail Icon screen opens.
Press EDIT.
2. Use PAGE UP /PAGE DOWN
recording you want to erase.
to scroll to the 2.
With Finalize selected, press ENTER.
Press EDIT.
3.
3. Note:
With Delete Title selected, press ENTER. Once you have finalized a DVD+R disc, you cannot record any
4. more Titles on the disc or edit the disc. You must finalize your
An EDIT message displays on the screen and the Title is DVD+R discs to play back on other recorders.
deleted.
Press TV/DVD.
1.
The Thumbnail Icon screen opens.
Press EDIT.
2.
Select Make Compatible and press ENTER.
3.
Note:
You must make your DVD+RW discs compatible to play back on
other recorders.
—6—