Documente Academic
Documente Profesional
Documente Cultură
Power Conversion
MV Induction Motors
For industrial pump, fan, compressor
and other industrial applications.
Standards
GE motors are designed for, but are not limited
to these critical industry standards:
NEMA MG1
IEC 60034-1
ANSI C50.41
IEEE 112
API 541 & 547
Applicable ISO, AFBMA, ANSI, ASME, and ASTM requirements
Quality
Our world-class testing facility has the capability of meeting a wide range of NEMA,
IEC and API motor requirements. GE is dedicated to manufacturing excellence.
Our facilities are ISO 9001 Certified with over 20 years of Six Sigma process
enhancements and best practice implementations. Our commitment is to deliver
the highest quality design to fit your system requirements with service to exceed
your expectations.
Superior Design
Meets or exceeds API 541 Reduction of Resonances
requirements for Petroleum GE supplies both flexible and rigid rotor technology. All
& Chemical Applications machines 1800 rpm and below have rigid rotors as defined
GE provides machines that are fully compliant to API 541 by API. Use of the latest engineering simulation tools and
standards, globally recognized among the most stringent. modern modal testing equipment makes it possible for GE
You can be assured that you are getting a well-designed and to assure shaft resonances do not impede operation of the
reliable product, optimized for your specific application. machine in the specified speed range.
Inverter Duty
The insulation system meets the requirements of NEMA MG-1,
part 31. If required, a shaft grounding device is installed to
reduce shaft voltage. Both bearings are insulated and the
drive end bearing is grounded. Our cage induction motors are
certified for use with the GE MV4, MV6 and MV7000 range of
variable frequency drives.
Improved ventilation
and cooling has been
achieved with a new
internal fan design.
Insulation System
GE uses an epoxy solventless resin vacuum-pressure-im-
pregnation (VPI) process assuring long life. For line voltages
of 5000 Volts and above, a semi-conducting armor is applied
to the slot portion and beyond the core to provide corona
protection. The binding agent is GE’s third generation epoxy
resin, selected and tested to IEEE-1776. The coils receive a
protective armor of heavy glass tape for protection against
®
Bearings
mechanical shock and abrasion. Custom Polyseal is a sealed GE uses self-aligning spherical seat sleeve bearings per DIN
winding insulation system that meets the requirements of 31693/4. Seal additions are also available to meet IP-56
NEMA MG1 20.18.. requirements. Anti-friction bearings are available with
Ground Wall
It is available upon Insulation grease in a sealed housing to avoid contamination meeting
request to operate in IP56 protection.
Turn
severe environments Insulation
containing moisture,
Strand
oil, chemicals and Insulation
Bearing Design
API compliant options are available for the rolling
element and sleeve bearing
Bearing
Upper Endshield Brush Lifting Device
In a traditional application as the motor achieves nominal
Stator
Chamber speed, the starting resistor is shorted out through the brushes
(Enclosed or Open Types) between the slip rings. This shortens the life of the brushes
and adds extra wear in the motor. An optional solution from
GE, called a Brush Lifting Device, is an integrated mechanism,
which shorts the slip rings and lifts the brushes at nominal
speed to avoid this wear.
Frame
Shaft
Rotor Lamination
Lower Endshield
Product Offering
Vertical MV Induction Motors
HP kW A* B* A B A B A B A B A B A B A B
500 370 8200 8200 8200 8200
1000 750 4 Poles 6 Poles 82008 Poles
8200 10 Poles
8200 8200 12
8200 Poles
8200 14
8200 Poles
8200 830016 Poles
8300 18 Poles
1500 1100 1800 RPM
8200 1200 RPM
8200 8200 900 RPM
8200 8200 720 RPM
8200 8200 600 RPM
8300 8300 514 RPM
8300 8300 450 RPM
8300 400 RPM
2000 1500 8200 8200 8200 8200 8200 8200 8300 8300 8300 8300 8300 8300
2500 1900 8200 8200 8200 8200 8300 8300 8300 8300 8300 8300 8500
3000 2200 8200 8200 8200 8300 8300 8300 8300 8300 8300 8500 8500
3500 2600 8200 8300 8300 8300 8300 8300 8300 8500 8500 8500 8500
4000 3000 8200 8300 8300 8300 8300 8500 8500 8500
4500 3400 8300 8300 8300 8300 8500 8500
5000 3700 8300 8300 8300 8300 8500 8500 8500
5500 4100 8300 8300 8300 8500 8500 8500
6000 4500 8300 8300 8500
6500 4900 8300
7000 5200 PV500
7500 5600 PV630
8000 6000 PV800
8500 6300 PV900
400
450
500
630
Ratings
60Hz. shown, 50Hz. Available. These ratings are based on
4.1 kV. Enclosures for other voltages may be sized differently.
Contact your GE representative for more information.
* Enclosures
A = WPI / WPII / TEWAC; IP23 / IP44W / IP54 / IP56
B = TEAAC; IP54 / IP56
Additional Options
Monitoring/Protection/Accessories
www.gepowerconversion.com
© 2014 General Electric Company. All rights reserved.
GEA31319 (7/2014)