Documente Academic
Documente Profesional
Documente Cultură
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 1
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
2 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
Molded BELTS
Application or Strt. Vulco-Flex® Application Belt No.
V-8 6.5 L DIESEL ENG. - Continued 4-CYL. 1.6 L ENG. (CANADA)
HUMMER - Continued SUNRUNNER
By Pass - Tank To Pipe ............................. 21781 Fan & Alt. .............................................................................. K040315
Heater To Valve .......................................... 18971 P.S.; W/O A.C....................................................................... K040320 GS
Valve To Eng............................................... ✂28466 A.C. & P.S............................................................................. K040365
Eng. To Valve.............................................. 18971 A.C.; W/O P.S....................................................................... K040325
Valve To Heater .......................................... 5/8” X 36” Cam. ...................................................................................... T164
Eng. To Aux. Heater ................................... 5/8” X 75”
Aux. Heater To Eng. ................................... 5/8” X 75” COOLANT HOSE
Rad. To Reservoir ....................................... 3/8” X 25”
Molded
1995 Application or Strt. Vulco-Flex®
Model/Engine Availability
HUMMER --- V-8 5.7 L; V-8 6.5 L DIESEL
4-CYL. 1.6 L ENG. (CANADA)
SUNRUNNER
Upper ........................................................... ✂21354 25150
BELTS Lower - Eng. To Pipe.................................. ✂20157 25150
Application Belt No. Lower - Pipe To Rad. ................................. 21404(B)
V-8 5.7 L ENG. By Pass ....................................................... ✂28407
Heater To Pipe............................................ 18424
HUMMER Throttle Body To Breather .......................... ✂28408
Serpentine; W/A.C................................................................. ✧K060966 Throttle Body To Injector ............................ ✂28408
Idler Pulley; W/A.C................................................................ 38006
Tensioner Assy...................................................................... 38108
Tensioner Pulley.................................................................... 38001 BMW
V-8 6.5 L DIESEL ENG.
HUMMER 2001
Serpentine; W/A.C................................................................. ✧K061033 Model/Engine Availability
Idler Pulley; W/A.C................................................................ 38001 X5 --- 6-CYL. 3.0 L; V-8 4.4 L
Tensioner Assy...................................................................... 38118
Tensioner Pulley.................................................................... 38006 BELTS
Application Belt No.
COOLANT HOSE 6-CYL. 3.0 L ENG.
Molded X5
Fan & Alt. .............................................................................. K060605
Application or Strt. Vulco-Flex®
A.C......................................................................................... K050340 GS
V-8 6.5 L DIESEL ENG. V-8 4.4 L ENG.
HUMMER X5
Upper - Rad. To Pipe ................................. 1 3/4” X 5 1/4” Fan & Alt. .............................................................................. K070640 GS
Upper - Pipe To Thermostat....................... ✂20974 A.C......................................................................................... K050396
By Pass ....................................................... 3/4” X 6”
1994 2000
Model/Engine Availability
Model/Engine Availability X5 --- V-8 4.4 L
HUMMER --- V-8 6.5 L DIESEL
BELTS BELTS
Application Belt No.
Application Belt No.
V-8 4.4 L ENG.
V-8 6.5 L DIESEL ENG. X5
HUMMER Fan & Alt. .............................................................................. K070640 GS
Serpentine ............................................................................. ✧K061033 A.C......................................................................................... K050396
Idler Pulley; W/O A.C............................................................ 38001
Tensioner Assy...................................................................... 38118
Tensioner Pulley.................................................................... 38006 BUICK
1993-1992 2002
Model/Engine Availability Model/Engine Availability
HUMMER --- V-8 6.2 L DIESEL RENDEZVOUS --- V-6 3.4 L
BELTS BELTS
Application Belt No. Application Belt No.
V-8 6.2 L DIESEL ENG. V-6 3.4 L ENG.
HUMMER RENDEZVOUS
Fan & Alt.; W/85A. Alt. ......................................................... 7483 Serpentine ............................................................................. ✧K060864
Fan & Alt.; W/124A. Alt. ....................................................... 7490 Idler Pulley............................................................................. ➁38006
Fan & P.S.............................................................................. ➁7500 Tensioner Pulley.................................................................... 38009
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 3
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
Molded
Application or Strt. Vulco-Flex® BELTS
Application Belt No.
V-8 5.7 L ENG.
ESCALADE 6-CYL. 4.2 L ENG.
Upper ........................................................... 22358
Lower ........................................................... 21941 TRAILBLAZER
By Pass ....................................................... 19025 Serpentine; W/150A. Alt........................................................ ✧K060915
Heater To Valve-1; W/O Aux. Heater......... 3/4” X 8”
Valve-1 To Eng.; W/O Aux. Heater............ ✂28479 Idler Pulley............................................................................. 38006
Heater To Valve-2; W/O Aux. Heater......... 5/8” X 8” Tensioner Pulley.................................................................... 38018
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
4 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 5
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
6 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 7
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
8 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 9
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
10 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 11
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
12 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 13
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
14 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 15
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
16 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 17
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
18 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 19
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
20 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 21
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
22 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 23
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
24 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 25
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
26 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 27
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
28 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 29
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
30 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 31
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
32 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 33
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
34 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 35
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
36 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 37
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
38 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 39
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
40 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 41
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
42 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 43
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
44 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 45
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
46 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 47
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
48 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 49
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
50 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 51
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
52 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 53
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
54 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 55
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
56 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 57
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
58 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 59
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
60 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 61
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
62 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 63
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
64 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 65
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
66 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 67
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
68 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 69
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
70 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 71
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
72 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 73
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
74 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 75
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
76 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 77
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
78 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 79
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
80 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 81
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
82 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 83
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
84 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 85
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
86 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 87
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
88 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 89
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
90 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 91
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
92 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 93
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
94 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 95
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
96 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 97
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
98 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 99
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
100 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 101
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
102 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 103
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
104 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 105
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
106 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 107
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
108 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 109
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
110 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 111
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
112 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 113
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
114 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 115
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
116 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 117
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
118 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 119
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
120 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 121
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
122 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 123
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
124 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 125
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
126 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 127
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
128 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 129
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
130 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 131
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
132 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 133
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
134 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 135
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
136 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 137
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
138 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 139
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
140 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 141
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
142 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 143
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
144 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 145
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
146 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 147
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
148 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 149
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
150 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 151
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
152 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 153
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
154 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 155
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
156 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 157
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
158 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 159
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). Green Stripe® Construction. ➂ Three Required.
GS
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
160 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 161
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
162 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 163
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
164 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 165
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
166 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 167
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
168 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 169
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
170 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 171
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
172 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 173
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
174 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 175
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
176 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 177
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
178 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 179
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
180 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 181
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
182 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 183
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
184 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 185
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). Green Stripe® Construction. ➂ Three Required.
GS
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
186 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 187
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
188 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 189
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
190 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 191
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
192 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 193
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
194 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 195
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
196 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 197
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
198 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 199
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
200 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 201
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
202 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 203
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
204 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 205
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
206 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 207
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
208 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 209
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
210 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 211
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
212 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 213
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
214 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 215
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
216 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 217
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
218 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 219
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
220 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 221
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
222 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 223
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
Molded BELTS
Application or Strt. Vulco-Flex® Application Belt No.
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
224 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 225
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
226 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 227
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
228 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 229
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
230 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 231
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
232 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 233
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
234 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 235
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
236 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
2001 2000
Model/Engine Availability
Model/Engine Availability CHEROKEE --- 4-CYL. 2.5 L; 6-CYL. 4.0 L
CHEROKEE --- 6-CYL. 4.0 L GRAND CHEROKEE --- 6-CYL. 4.0 L; V-8 4.7 L
GRAND CHEROKEE --- 6-CYL. 4.0 L; V-8 4.7 L TJ --- 4-CYL. 2.5 L (CANADA); 6-CYL. 4.0 L (CANADA)
TJ --- 4-CYL. 2.5 L (CANADA); 6-CYL. 4.0 L (CANADA) WRANGLER --- 4-CYL. 2.5 L; 6-CYL. 4.0 L
WRANGLER --- 4-CYL. 2.5 L; 6-CYL. 4.0 L
BELTS
BELTS Application Belt No.
Application Belt No. 4-CYL. 2.5 L ENG.
4-CYL. 2.5 L ENG. CHEROKEE; WRANGLER
WRANGLER Serpentine; W/A.C.; W/P.S................................................... ✧K060910
Serpentine; W/A.C................................................................. ✧K060923 Serpentine; W/O A.C.; W/P.S............................................... ✧K060790
Idler Pulley............................................................................. 38021 Idler Pulley - Adjustable........................................................ 38001
Tensioner Pulley.................................................................... 38020 Idler Pulley - Stationary ........................................................ 38021
Molded
4-CYL. 2.5 L ENG.
Application or Strt. Vulco-Flex® CHEROKEE
Upper ........................................................... 21087(B) 25300
4-CYL. 2.5 L ENG. Lower ........................................................... ✂20559
WRANGLER Heater To Pipe-2; W/Left Hand Drive ........ 19037
Upper ........................................................... 22281 WRANGLER
Lower ........................................................... 22280 Upper ........................................................... 22281
Lower ........................................................... 22280
4-CYL. 2.5 L ENG. (CANADA) Heater To Thermostat................................. ✂19037
TJ 4-CYL. 2.5 L ENG. (CANADA)
Upper ........................................................... 22281
Lower ........................................................... 22280 TJ
Upper ........................................................... 22281
6-CYL. 4.0 L ENG. Lower ........................................................... 22280
CHEROKEE Heater To Thermostat................................. ✂19037
Upper ........................................................... 21821 6-CYL. 4.0 L ENG.
Lower ........................................................... 21615 CHEROKEE
GRAND CHEROKEE Upper ........................................................... 21821
Upper ........................................................... 22484 Lower ........................................................... 21615
Lower ........................................................... 22483 Heater To Pipe............................................ 19038
WRANGLER Heater To Eng............................................. 19039
Upper ........................................................... 22282 GRAND CHEROKEE
Lower ........................................................... ✂20931 Upper ........................................................... 22484
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 237
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
238 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 239
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
240 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 241
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
242 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 243
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
244 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 245
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
246 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 247
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
248 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 249
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
250 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 251
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
Molded BELTS
Application or Strt. Vulco-Flex® Application Belt No.
4-CYL. 2.0 L ENG. - Continued 4-CYL. 2.0 L ENG.
SPORTAGE - Continued SPORTAGE
Eng. To Throttle Body................................. ✂18112 Fan & Alt. .............................................................................. K040365
Pipe-2 To Thermostat ................................. ✂28466 P.S......................................................................................... 9309 GS
Throttle Body To Pipe-2.............................. 1/4” X 17” A.C......................................................................................... 9355 GS
Throttle Body To Oil Cooler........................ 1/4” X 16” Cam. ...................................................................................... ✩T281
Oil Cooler To Throttle Body........................ 1/4” X 16”
COOLANT HOSE
1999
Model/Engine Availability Molded
SPORTAGE --- 4-CYL. 2.0 L Application or Strt. Vulco-Flex®
4-CYL. 2.0 L ENG.
BELTS SPORTAGE
Application Belt No. Upper; W/DOHC Eng.................................. ✂21532
Lower ........................................................... 22422
4-CYL. 2.0 L ENG. By Pass - Pipe To Pipe .............................. 5/16” X 5”
SPORTAGE Heater To Pipe-1......................................... ✂18789
Fan & Alt. .............................................................................. K040365 Heater To Pipe-2; W/DOHC Eng................ 19136
P.S......................................................................................... 9309 GS Heater To Pipe-2; W/SOHC Eng................ 19137
A.C......................................................................................... 9355 GS Eng. To Throttle Body................................. ✂18112
Cam. ...................................................................................... ✩T281 Pipe-3 To Thermostat ................................. ✂28466
Throttle Body To Pipe-4.............................. 1/4” X 17”
COOLANT HOSE Throttle Body To Pipe-5; W/SOHC Eng..... 1/4” X 5”
Molded 1996
Application or Strt. Vulco-Flex® Model/Engine Availability
SPORTAGE --- 4-CYL. 2.0 L
4-CYL. 2.0 L ENG.
SPORTAGE BELTS
Upper ........................................................... ✂21532 Application Belt No.
Lower ........................................................... 22422
Heater To Pipe-1......................................... ✂18789 4-CYL. 2.0 L ENG.
Heater To Pipe-2......................................... 19136 SPORTAGE
Eng. To Throttle Body................................. ✂18112 Fan & Alt. .............................................................................. K040365
Pipe-2 To Thermostat ................................. ✂28466 P.S......................................................................................... 9309 GS
Throttle Body To Pipe-2.............................. 1/4” X 17” A.C......................................................................................... 9355 GS
Throttle Body To Oil Cooler........................ 1/4” X 16” Cam. ...................................................................................... ✩T281
Oil Cooler To Throttle Body........................ 1/4” X 16”
COOLANT HOSE
1998
Model/Engine Availability Molded
SPORTAGE --- 4-CYL. 2.0 L Application or Strt. Vulco-Flex®
4-CYL. 2.0 L ENG.
BELTS SPORTAGE
Application Belt No. Upper; W/DOHC Eng.................................. ✂21532
Lower ........................................................... 22422
4-CYL. 2.0 L ENG. By Pass - Pipe To Pipe .............................. 5/16” X 5”
SPORTAGE Heater To Pipe-1......................................... ✂18789
Fan & Alt. .............................................................................. K040365 Heater To Pipe-2; W/DOHC Eng................ 19136
P.S......................................................................................... 9309 GS Heater To Pipe-2; W/SOHC Eng................ 19137
A.C......................................................................................... 9355 GS Eng. To Throttle Body................................. ✂18112
Cam. ...................................................................................... ✩T281 Pipe-3 To Thermostat ................................. ✂28466
Throttle Body To Pipe-4.............................. 1/4” X 17”
COOLANT HOSE Throttle Body To Pipe-5; W/SOHC Eng..... 1/4” X 5”
Molded 1995
Application or Strt. Vulco-Flex® Model/Engine Availability
SPORTAGE --- 4-CYL. 2.0 L
4-CYL. 2.0 L ENG.
SPORTAGE BELTS
Upper ........................................................... ✂21532 Application Belt No.
Lower ........................................................... 22422
Heater To Pipe-1......................................... ✂18789 4-CYL. 2.0 L ENG.
Heater To Pipe-2......................................... 19136 SPORTAGE
Eng. To Throttle Body................................. ✂18112 Fan & Alt. .............................................................................. K040365
Pipe-2 To Thermostat ................................. ✂28466 P.S......................................................................................... 9309 GS
Throttle Body To Pipe-2.............................. 1/4” X 17” A.C......................................................................................... 9355 GS
Throttle Body To Oil Cooler........................ 1/4” X 16” Cam.; W/DOHC Eng............................................................. ✩T281
Oil Cooler To Throttle Body........................ 1/4” X 16” Cam.; W/SOHC Eng. ............................................................ ✩T264
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
252 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 253
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
254 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 255
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
256 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). Green Stripe® Construction. ➂ Three Required.
GS
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 257
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
2001 BELTS
Model/Engine Availability Application Belt No.
B2300 PICKUP --- 4-CYL. 2.3 L 4-CYL. 2.5 L ENG.
B2500 PICKUP --- 4-CYL. 2.5 L
B3000 PICKUP --- V-6 3.0 L B2500 PICKUP
B4000 PICKUP --- V-6 4.0 L Serpentine; W/A.C................................................................. ✧K060820
MPV --- V-6 2.5 L Serpentine; W/O A.C. ........................................................... ✧K060696
TRIBUTE --- 4-CYL. 2.0 L; V-6 3.0 L Cam. ...................................................................................... T276
Idler Pulley............................................................................. 38001
BELTS V-6 2.5 L ENG.
Application Belt No. MPV
4-CYL. 2.0 L ENG. Alt., P.S. & A.C. .................................................................... K060825
W.P........................................................................................ K030267
TRIBUTE
Serpentine; W/A.C................................................................. ✧K060827 V-6 3.0 L FLEX ENG.
Serpentine; W/O A.C. ........................................................... ✧K060775 B3000 PICKUP
Cam. ...................................................................................... T294 Serpentine; W/A.C................................................................. ✧K060882
Idler Pulley............................................................................. 38018 Serpentine; W/O A.C. ........................................................... ✧K060858 GS
Tensioner Pulley.................................................................... 38008 Idler Pulley............................................................................. 38006
Tensioner Assy...................................................................... 38114
V-6 3.0 L ENG. Tensioner Pulley.................................................................... 38006
B3000 PICKUP
Serpentine; W/A.C................................................................. ✧K060882 V-6 4.0 L ENG.
Serpentine; W/O A.C. ........................................................... ✧K060858 GS B4000 PICKUP
Idler Pulley............................................................................. 38001 Serpentine; W/A.C................................................................. ✧K060882
Tensioner Assy...................................................................... 38114 Serpentine; W/O A.C. ........................................................... ✧K060810
Tensioner Pulley.................................................................... 38006 Idler Pulley............................................................................. 38001
TRIBUTE Tensioner Assy...................................................................... 38102
Serpentine; W/A.C................................................................. ✧K060820 Tensioner Pulley.................................................................... 38008
W.P.; W/25 1/2” Belt O.C. .................................................... K030250
W.P.; W/27” Belt O.C............................................................ K030267 COOLANT HOSE
V-6 4.0 L ENG.
Molded
B4000 PICKUP Application or Strt. Vulco-Flex®
Serpentine; W/A.C................................................................. ✧K060882
Serpentine; W/O A.C. ........................................................... ✧K060810 4-CYL. 2.5 L ENG.
Idler Pulley............................................................................. 38001 B2500 PICKUP
Tensioner Assy...................................................................... 38102 Upper ........................................................... 22380
Tensioner Pulley.................................................................... 38008 Lower ........................................................... 22364
Heater To Tee-1; W/O A.C......................... 5/8” X 7”
COOLANT HOSE Tee-1 To W.P.; W/O A.C............................ ✂28478
Tee-1 To Throttle Body............................... 1/4” X 13”
Molded Heater To Intake Manifold; W/O A.C. ........ 18916
Application or Strt. Vulco-Flex® Heater To Tee-1; W/A.C. ............................ 5/8” X 7”
Tee-1 To Valve; W/A.C............................... 5/8” X 7”
4-CYL. 2.0 L ENG. Valve To W.P.; W/A.C. ............................... ✂18072
TRIBUTE Heater To Valve; W/A.C. ............................ 5/8” X 15”
Upper ........................................................... 22568 Valve To Intake Manifold; W/A.C. .............. 19104
V-6 3.0 L ENG. V-6 2.5 L ENG.
B3000 PICKUP MPV
Upper ........................................................... 22144 By Pass ....................................................... 19025
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
258 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 259
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
260 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 261
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
262 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 263
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
264 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 265
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
266 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
BELTS BELTS
Application Belt No. Application Belt No.
4-CYL. 2.0 L ENG. 4-CYL. 2.0 L ENG.
B2000 PICKUP B2000 PICKUP
Fan & Alt. .............................................................................. 9365 GS Fan & Alt.; W/Man. Trans..................................................... 9370 GS
P.S......................................................................................... 9341 GS Fan & Alt.; W/Auto. Trans. ................................................... 9350 GS
A.C......................................................................................... 9360 GS A.C......................................................................................... 7300
Cam.; Chassis No. 568707 & Before................................... T113 A.P.; W/O A.C....................................................................... 9313 GS
Cam.; Chassis No. 568708 & After...................................... T117 A.C. To A.P........................................................................... 7260
4-CYL. 2.2 L DIESEL ENG.
COOLANT HOSE B2200 PICKUP
Fan & Alt. .............................................................................. 9447 GS
Molded A.C......................................................................................... 9550 GS
Application or Strt. Vulco-Flex®
COOLANT HOSE
4-CYL. 2.0 L ENG.
B2000 PICKUP Molded
Upper ........................................................... 22325 25251 Application or Strt. Vulco-Flex®
Lower ........................................................... 20776 25251 4-CYL. 2.0 L ENG.
By Pass ....................................................... ✂18206 B2000 PICKUP
Heater To Pipe............................................ 18900 Upper; W/O A.P. ......................................... ✂21170 25255
Heater To Eng............................................. ✂18899 Upper; W/A.P............................................... ✂21171
Pipe To Thermostat..................................... 3/8” X 8” Lower ........................................................... ✂21794 25476
Pipe To Pipe................................................ 5/16” X 6” By Pass ....................................................... 1/4” X 10”
Throttle Body To Pipe; W/Fuel Inj.............. ✂18010 Heater To Intake Manifold .......................... ✂18703
Pipe To Eng.; W/Fuel Inj. ........................... 18100 4-CYL. 2.2 L DIESEL ENG.
Throttle Body To Intake Manifold; W/Fuel
B2200 PICKUP
Inj.............................................................. 18100 By Pass ....................................................... 1 1/4” X 3 1/2”
Heater To Pipe-1......................................... ✂18703
1984 Pipe-2 To Thermostat ................................. 5/8” X 9”
Model/Engine Availability
B2000 PICKUP --- 4-CYL. 2.0 L 1981
B2200 PICKUP --- 4-CYL. 2.2 L DIESEL Model/Engine Availability
B2000 PICKUP --- 4-CYL. 2.0 L
BELTS COOLANT HOSE
Application Belt No.
4-CYL. 2.0 L ENG. Molded
B2000 PICKUP Application or Strt. Vulco-Flex®
Fan & Alt.; W/Man. Trans..................................................... 9370 GS 4-CYL. 2.0 L ENG.
Fan & Alt.; W/Auto. Trans. ................................................... 9350 GS B2000 PICKUP
A.C......................................................................................... 7300 Upper; W/O A.P. ......................................... ✂21170 25255
A.P.; W/O A.C....................................................................... 9313 GS Upper; W/A.P............................................... ✂21171
A.C. To A.P........................................................................... 7260 Lower ........................................................... ✂21794 25476
By Pass ....................................................... 1/4” X 10”
4-CYL. 2.2 L DIESEL ENG.
B2200 PICKUP NOTE: For 1980 and Earlier Applications, See The 31-2050 Catalog.
Fan & Alt. .............................................................................. 9447 GS
A.C......................................................................................... 9550 GS
MERCEDES-BENZ
COOLANT HOSE 2001
Model/Engine Availability
Molded ML320 --- V-6 3.2 L
Application or Strt. Vulco-Flex® ML430 --- V-8 4.3 L
ML55 --- V-8 5.5 L
4-CYL. 2.0 L ENG.
B2000 PICKUP BELTS
Upper; W/O A.P.; U.S................................. 21229 25257 Application Belt No.
Upper; W/O A.P.; Canada .......................... ✂21170 25255
Upper; W/A.P............................................... ✂21171 V-6 3.2 L ENG.
Lower ........................................................... ✂21794 25476 ML320
By Pass ....................................................... 1/4” X 10” Serpentine ............................................................................. ✧K060942
Heater To Intake Manifold .......................... ✂18703 V-8 4.3 L ENG.
4-CYL. 2.2 L DIESEL ENG. ML430
Serpentine ............................................................................. ✧K060942
B2200 PICKUP
By Pass ....................................................... 1 1/4” X 3 1/2” V-8 5.5 L ENG.
Heater To Pipe-1......................................... ✂18703 ML55
Pipe-2 To Thermostat ................................. 5/8” X 9” Serpentine ............................................................................. ✧K060942
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 267
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
268 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 269
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
270 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 271
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
272 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
Molded
V-6 3.5 L ENG.
Application or Strt. Vulco-Flex® MONTERO
Upper ........................................................... ✂22251
4-CYL. 2.4 L ENG. Lower ........................................................... 22146
MONTERO SPORT Heater To Pipe-1......................................... ✂18769
Upper ........................................................... ✂21186 Throttle Body To Eng.................................. ✤✂18011
Pipe-3 To Throttle Body.............................. 5/16” X 13” Tee To Pipe-2 ............................................. ✂18010
Throttle Body To Pipe-4.............................. 5/16” X 9” Tee To Eng. ................................................ 1/4” X 3”
Tee To Thermostat...................................... 1/4” X 6”
V-6 3.0 L ENG.
MONTERO SPORT 1995
Upper ........................................................... 21744 Model/Engine Availability
Lower ........................................................... 22475 EXPO --- See MITSUBISHI In Pass. Car Section
Heater To Pipe-1......................................... 18799 MONTERO --- V-6 3.0 L; V-6 3.5 L
Thermostat To Pipe-3 ................................. ✤1/4” X 5” PICKUP --- 4-CYL. 2.4 L
Throttle Body To Pipe-4.............................. 5/16” X 6”
Throttle Body To Pipe-5.............................. ✤1/4” X 8” BELTS
V-6 3.5 L ENG. Application Belt No.
MONTERO 4-CYL. 2.4 L ENG.
Upper ........................................................... ✂22251 PICKUP
Lower ........................................................... 22146 W.P. & Alt.............................................................................. 7385
Heater To Pipe-1......................................... ✂18769 P.S......................................................................................... 9390 GS
Eng. To Pipe-6 ............................................ 1/4” X 8” A.C......................................................................................... 9360 GS
Pipe-4 To Throttle Body.............................. 5/16” X 6” Balance Shaft........................................................................ T168
Thermostat To Pipe-3 ................................. ✤1/4” X 5” Cam. ...................................................................................... T229
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 273
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
BELTS BELTS
Application Belt No. Application Belt No.
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
274 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 275
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
276 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 277
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
1984 1983
Model/Engine Availability Model/Engine Availability
MONTERO --- 4-CYL. 2.6 L MONTERO --- 4-CYL. 2.6 L
PICKUP --- 4-CYL. 2.0 L; 4-CYL. 2.3 L DIESEL; 4-CYL. 2.6 L PICKUP --- 4-CYL. 2.0 L; 4-CYL. 2.3 L DIESEL; 4-CYL. 2.6 L
BELTS BELTS
Application Belt No. Application Belt No.
4-CYL. 2.0 L ENG. 4-CYL. 2.0 L ENG.
PICKUP PICKUP
Fan & Alt. .............................................................................. 7380 Fan & Alt. .............................................................................. 7380
Fan & P.S.............................................................................. 9400 GS Fan & P.S.............................................................................. 9400 GS
A.C......................................................................................... 9380 GS A.C......................................................................................... 9380 GS
Balance Shaft........................................................................ T090 Balance Shaft........................................................................ T090
Cam. ...................................................................................... T089 Cam. ...................................................................................... T089
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
278 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 279
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
BELTS BELTS
Application Belt No. Application Belt No.
4-CYL. 2.4 L ENG. 4-CYL. 2.4 L ENG.
FRONTIER; XTERRA FRONTIER
Fan & Alt. .............................................................................. 7355 Fan & Alt. .............................................................................. 7355
P.S......................................................................................... 9495 GS P.S......................................................................................... 9495 GS
A.C......................................................................................... 9365 GS A.C......................................................................................... 9365 GS
V-6 3.3 L ENG. V-6 3.3 L ENG.
FRONTIER; XTERRA FRONTIER
Alt........................................................................................... K050316 Alt........................................................................................... K050316
Fan & P.S.............................................................................. K050486 Fan & P.S.............................................................................. K050486
A.C......................................................................................... K040529 A.C......................................................................................... K040529
Cam. ...................................................................................... ✩T249 Cam. ...................................................................................... T249
PATHFINDER PATHFINDER
Fan & Alt. .............................................................................. K060420 Fan & Alt. .............................................................................. K060420
P.S......................................................................................... 9350 GS A.C......................................................................................... K050505
A.C......................................................................................... K050505 Cam. ...................................................................................... T249
Cam. ...................................................................................... ✩T249 QUEST
QUEST Alt........................................................................................... K050335
Alt........................................................................................... K050335 W.P. & P.S............................................................................ K040405
W.P. & P.S............................................................................ K040405 A.C......................................................................................... K040460 GS
A.C......................................................................................... K040460 GS Cam. ...................................................................................... T249
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
280 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 281
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
282 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 283
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
284 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 285
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
286 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 287
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
288 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 289
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
2000 BELTS
Application Belt No.
Model/Engine Availability
BRAVADA --- V-6 4.3 L V-6 3.4 L ENG.
SILHOUETTE --- V-6 3.4 L SILHOUETTE
Serpentine; W/105A. Alt........................................................ ✧K060874 GS
BELTS Idler Pulley............................................................................. ➁38006
Application Belt No. Tensioner Assy...................................................................... 38104
Tensioner Pulley.................................................................... 38009
V-6 3.4 L ENG.
SILHOUETTE V-6 4.3 L ENG.
Serpentine ............................................................................. ✧K060874 GS BRAVADA
Idler Pulley............................................................................. ➁38006 Serpentine; W/A.C................................................................. ✧K060950
Tensioner Assy...................................................................... 38104 Serpentine; W/O A.C. ........................................................... ✧K060870
Tensioner Pulley.................................................................... 38009
Idler Pulley - Smooth ............................................................ 38001
V-6 4.3 L ENG. Idler Pulley - Grooved; W/O A.C.......................................... 38008
BRAVADA Tensioner Assy...................................................................... 38103
Serpentine; W/A.C................................................................. ✧K060950 Tensioner Pulley.................................................................... 38008
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
290 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 291
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
292 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 293
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
294 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 295
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
296 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 297
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
298 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 299
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
300 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 301
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
302 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 303
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
304 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 305
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
306 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
V-8 5.2 L ENG.; V-8 5.9 L ENG. - Continued V-6 3.4 L ENG.
MONTANA
TRAILDUSTER - Continued Upper ........................................................... 22361
Heater To Valve; W/A.C. ............................ 5/8” X 12” Lower ........................................................... 21991
Valve To Thermostat; W/A.C...................... 5/8” X 24” By Pass ....................................................... 19026
Heater To W.P. ........................................... 3/4” X 48” Heater To Pipe-1; W/O Aux. Heater .......... 5/8” X 11”
Connector - Heater To Pipe-1 .................... 28500
NOTE: For 1980 and Earlier Applications, See The 31-2050 Catalog. Pipe-1 To Throttle Body; W/O Aux. Heat-
er............................................................... ✂18020
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 307
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
308 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 309
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
310 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
Molded
Application or Strt. Vulco-Flex® BELTS
Application Belt No.
V-6 3.1 L ENG.
4-CYL. 1.8 L ENG.
TRANS SPORT
Upper ........................................................... 21361 25255(A) BRAT
Lower ........................................................... 22019 W.P. & Alt.............................................................................. 7355
By Pass ....................................................... 3/4” X 3” A.C.; W/49 1/4” Belt O.C. ..................................................... 9490 GS
Heater To W.P.; W/O Aux. Heater............. 19615 A.C.; W/54 1/4” Belt O.C. ..................................................... 9540 GS
Heater To Pipe; W/O Aux. Heater.............. ✂18819
Heater To Tee-1; W/Aux. Heater................ 3/4” X 3 1/2” COOLANT HOSE
Tee-1 To Aux. Heater Pipe-1; W/Aux.
Heater....................................................... 5/8” X 3 1/2” Molded
Connector - Aux. Heater Pipe-1 To Aux. Application or Strt. Vulco-Flex®
Heater....................................................... 28500
Tee-2 To Pipe; W/Aux. Heater ................... 18794 4-CYL. 1.8 L ENG.
Heater To Tee-2; W/Aux. Heater................ ✂28466 BRAT
Tee-2 To Aux. Heater Pipe-2; W/Aux. Upper ........................................................... 21234 25157(A)
Heater....................................................... 5/8” X 3 1/2” Lower ........................................................... ✂20952 25152(A)
Connector - Aux. Heater Pipe-2 To Aux. Heater To Pipe-1......................................... 18772
Heater....................................................... 28500 Pipe-1 To Eng. ............................................ ✂28466
V-6 3.8 L ENG. Heater To Pipe-2; W/Auto. Trans............... 18781
TRANS SPORT Heater To Pipe-2; W/Man. Trans. .............. 18772
Upper ........................................................... 21948 25253 Pipe To Pipe................................................ ✂18772
Lower ........................................................... 21945 Valve To Eng............................................... ✂18103
By Pass ....................................................... ✂18801
Heater To Pipe-1; W/O Aux. Heater .......... ✂19609 1985
Heater To Tee-1; W/Aux. Heater................ 3/4” X 3 1/2” Model/Engine Availability
Tee-1 To Pipe-1; W/Aux. Heater ................ ✂19609 BRAT --- 4-CYL. 1.8 L
Tee-1 To Aux. Heater Pipe-1; W/Aux.
Heater....................................................... ✂5/8” X 3 1/2”
Connector - Aux. Heater Pipe-1 To Aux. BELTS
Heater....................................................... 28500 Application Belt No.
Heater To Tee-2; W/Aux. Heater................ ✂28466
Tee-2 To Pipe-2; W/Aux. Heater ................ 18794
4-CYL. 1.8 L ENG.
Tee-2 To Aux. Heater Pipe-2; W/Aux. BRAT
Heater....................................................... 5/8” X 3 1/2” W.P. & Alt.............................................................................. 7355
Connector - Aux. Heater Pipe-2 To Aux. P.S......................................................................................... 9495 GS
Heater....................................................... 28500 A.C.; W/49 1/4” Belt O.C. ..................................................... 9490 GS
A.C.; W/54 1/4” Belt O.C. ..................................................... 9540 GS
1991-1990
Model/Engine Availability COOLANT HOSE
TRANS SPORT --- V-6 3.1 L
Molded
BELTS Application or Strt. Vulco-Flex®
Application Belt No. 4-CYL. 1.8 L ENG.
V-6 3.1 L ENG. BRAT
TRANS SPORT Upper ........................................................... 21234 25157(A)
Serpentine; W/A.C................................................................. ✧K060695 Lower ........................................................... ✂20952 25152(A)
Serpentine; W/O A.C. ........................................................... ✧K060598 Heater To Pipe-1......................................... 18772
Idler Pulley; W/O A.C............................................................ 38009 Pipe-1 To Eng. ............................................ ✂28466
Tensioner Assy...................................................................... 38105 Heater To Pipe-2; W/Auto. Trans............... 18781
Tensioner Pulley.................................................................... 38007 Heater To Pipe-2; W/Man. Trans. .............. 18772
Pipe To Pipe................................................ ✂18772
COOLANT HOSE Valve To Eng............................................... ✂18103
Molded 1984-1983
Application or Strt. Vulco-Flex® Model/Engine Availability
V-6 3.1 L ENG. BRAT --- 4-CYL. 1.8 L
TRANS SPORT
Upper ........................................................... 21361 25255(A) BELTS
Lower ........................................................... 21576 Application Belt No.
By Pass ....................................................... 3/4” X 3”
Heater To Pipe; W/O Aux. Heater.............. ✂18819 4-CYL. 1.8 L ENG.
Heater To Eng.; W/O Aux. Heater ............. 19615 BRAT
Heater To Valve; W/Aux. Heater ................ ✂28466 W.P. & Alt.; W/O Turbo ........................................................ 7355
Valve To Pipe; W/Aux. Heater.................... 18794 W.P., Alt., A.C. & P.S.; W/Turbo.......................................... 9451 GS
Connector - Valve To Aux. Heater Pipe-3 . 28500 W.P., A.C. & P.S.; W/Turbo ................................................. 9390 GS
Aux. Heater Pipe-1 To Aux. Heater Pipe-2 18794 P.S.; W/O Turbo.................................................................... 9490 GS
Aux. Heater Pipe-3 To Aux. Heater Pipe-4 ✂19609 A.C.; W/O Turbo ................................................................... 9540 GS
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 311
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
312 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 313
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
314 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 315
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
316 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 317
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
318 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 319
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
320 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 321
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
322 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 323
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
324 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 325
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
326 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 327
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
328 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 329
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
330 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 331
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
332 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 333
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
334 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 335
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
336 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 337
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
338 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 339
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
340 See inside back cover for timing belt and small I.D. hose installation information.
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
See inside back cover for timing belt and small I.D. hose installation information. 341
Belts and Coolant Hose for Light Trucks, Vans and Motor Homes
✩ Interference engine application. See inside back cover for additional information. ✂ Cut To Fit. ➁ Two Required.
✧ For belt routing information, see Micro-V® Belt Installation section (Pages 26-48). GSGreen Stripe® Construction. ➂ Three Required.
✤ Protective sleeve required. Use OEM sleeve or other abrasion/heat protection. ▲ Use Durion Silicone Heater Hose.
®
❂ Connector Required.
342 See inside back cover for timing belt and small I.D. hose installation information.