Documente Academic
Documente Profesional
Documente Cultură
Current View
/m
00 kN
10.0
/m
00 kN
10.0
13
14
12
RC capping beam.a3m
RC Capping Beam Job No Stoney Brdige
Job Ref Redrow
Designed By BSI
Checked By MD
Date
Revision No 1.0
Calc No 1.0
Page No 2
A3D MAX V4.54(Build 900) Copyright © Computer and Design Services Ltd. ( Analysis No. 29 )
Design Code
Design code Concrete code Steel Code National Annex
Members
Mbr Member Start Start End End Orient Directional Length P-Delta Slope
ref type joint fixity joint fixity (°) behaviour (m) behaviour (°)
75 600 x 450 12 Fixed 14 Fixed 0.0 Normal 0.500 Normal 0.0
76 600 x 450 14 Fixed 13 Fixed 0.0 Normal 0.500 Normal 0.0
Joints
Joint X pos Y pos Z pos Joint X pos Y pos Z pos Joint X pos Y pos Z pos
ref (m) (m) (m) ref (m) (m) (m) ref (m) (m) (m)
12 -59.290 -21.196 0.000 13 -58.290 -21.196 0.000 14 -58.790 -21.196 0.000
Supports
Joint Support X Trans. Y Trans. Z Trans. X Rot. Y Rot. Z Rot. Direction
ref type (kN/mm) (kN/mm) (kN/mm) (kNm/Rad) (kNm/Rad) (kNm/Rad) control
12 Pinned Fixed Fixed Free Free Free Free Normal
13 Pinned Fixed Fixed Free Free Free Free Normal
RC capping beam.a3m
Sections
Reference Area Ixx Iyy J Elements (mm)
(cm²) (cm4) (cm4) (cm4) No Width Height Vert. off Lat. off
305x165 UKB40 51.3 8503 764 14.7
RC Member Sections
Reference Section Area Ixx Iyy J Web Flanges
position (cm²) (cm4) (cm4) (cm4) depth width Position Thick Left Right
(mm) (mm) proj proj
600 x 450 Constant 2700 455625 810000 965849 450.00 600.00
Materials
Material Elastic Poisson Density Thermal
reference modulus ratio expansion
(kN/mm²) (kN/m3) (/°Cx10-6)
BS EN-ConcC28/35 32.31 0.20 25.00 12.00
RC Member Types
Reference Shape Material Segment Section Depth Length
(mm) (mm)
600 x 450 Uniform BS EN- Constant Rectangular beam 450.00 Varies
Self Weights
Mem Self weight Mem Self weight Mem Self weight Mem Self weight
ref ( kN ) ref ( kN ) ref ( kN ) ref ( kN )
75 3.375 76 3.375
Total self weight for selected members : 6.750 kN
Member Loads
Load Start Start intensity End End intensity
Load reference Direction Category
type pos'n (m) (kN) & (m) pos'n (m) (kN) & (m)
Loads on member 75 (Length 0.500m)
Wall A UL 10.000 Vertical (-Y) Imposed
Loads on member 76 (Length 0.500m)
Wall A UL 10.000 Vertical (-Y) Imposed
RC capping beam.a3m
RC Capping Beam Job No Stoney Brdige
Job Ref Redrow
Designed By BSI
Checked By MD
Date
Revision No 1.0
Calc No 1.0
Page No 4
A3D MAX V4.54(Build 900) Copyright © Computer and Design Services Ltd. ( Analysis No. 29 )
RC capping beam.a3m
RC Capping Beam Job No Stoney Brdige
Job Ref Redrow
Designed By BSI
Checked By MD
Date
Revision No 1.0
Calc No 1.0
Page No 5
A3D MAX V4.54(Build 900) Copyright © Computer and Design Services Ltd. ( Analysis No. 29 )
Note: In top and bottom bar specifications `L' means `bar layer' .
For bar curtailments and other details refer to CADS RC Beam Designer Reinforcement design data results for the relevant span.
Any torsion moments or minor axis moments present in frame analysis are ignored by RC Beam Designer.
Warnings / Errors
Design
Member ref. Warnings / Errors
object
Group Reference - cap beam
13 75-76 Barset 1 - Insufficient vertical height to fit bar within beam
RC capping beam.a3m