Documente Academic
Documente Profesional
Documente Cultură
Table of Contents
1/4
2. T-Con B/D Errors_(2)
2/4
2. T-Con B/D Errors_(3)
3/4
3. T-Con B/D Repair Guide
Repair Process
P-VCC(12V) B/D inside T-CON and US1 output voltage
If voltage is abnormal, open and re-check FFC leading from T-CON to module.
If the error persists, change T-CON board or the module if voltage is normal
Check Point
Reference
- P-VCC: Standard voltage to activate LCD
- VCC: Usually 3.3V power is required to activate Digital IC
VDD
- VDD: A voltage supplied to Source Drive IC to activate LCD
VCC - VGL/VGH: Voltages required to turn TFT gate on/off
(VGL: TFT Gate on / VGH: TFT Gate off)
VGL
VGH
4/4