Documente Academic
Documente Profesional
Documente Cultură
SAFE
FOS = 17.5 > 1.2
RESULT TABLE--
Span = 10 m B. Check for flexural Bending Ref ASME BTH1-2005 - Clause 3.2.3.2
Load = 9 T
Check for comp = SAFE 17.5 Allowable bending stress (Fb) = 80.00 N/mm2
Chk for bending = SAFE 1.7
Chk for shear = SAFE 107.4 Actual bending stress (fb) = 48.03 N/mm2
Chk for combined = SAFE 1.1
SAFE
FOS = 1.7 > 1.2
Assumptions :
1. Load is vertical and no severe impact on lifting. C. Check for Shear stress Ref ASME BTH1-2005 - Clause 3.2.3.6
2. Angle of tension cables with horizontal will be maintained at 60 degree or more.
3. Bending and buckling is considered in Z-Z direction Allowable shear stress (Fv) = 46.19 N/mm2
4. Pipe and plate is considered as a homogenous section.
5. Lifting should be avoided under high wind conditions. Actual shear stress (fv) = 0.43 N/mm2
SAFE
FOS = 107.4 > 1.2
D. Check for combined Axial and Bending stress Ref ASME BTH1-2005 - Clause 3.2.4
Chk (i)
Chk (ii)
Chk (iii)
ID= OD=
X L1= 174.62 219.08
0
L5=
0 L2= L3=
0 0
r = sqrt(I/A)
r = 70.03936
X 22.23
+ A plate5
+ 0
+ I plate5
+ 0
+ Z plate5
+ 0
PIPE DATA acc ANSI B 36.10
NPS DN OD 5S 5 10S 10 20 30 40S Std. 40 60 80S