Documente Academic
Documente Profesional
Documente Cultură
AV 130 X
Cummins
Manual
WinGPI - part 3 - Upload
Edition 07/2012 EN
Speed Sw: 10102718_S0018B_P0004B.Hex
Created by AITC
WARNING!
This material is intended for persons holding a valid certificate of successful completion of the
course in the AITC in Ammann Czech Republic a.s.
General procedure for recording Susmic of SPEED
Perform the computer interconnection by means of a connecting cable (RS 232) into the Susmic socket
on the left side of the cabin (under the cover). Select the required unit (SPEED).
Open program Win GPI - open LOAD HEX version: 10102718_S0018B_P0004B.hex
Select correct version software for the type of machine and unit.
1
-Download running......
After successful complete loading Susmic - key return to the position, 0 "and turn off the program
Win GPI.
Perform the computer interconnection by means of a connecting cable (RS 232) into the Susmic socket
on the left side ofcabin (under the cover). Select the required unit (SPEED).
Open program Win GPI - open LOAD TCF – select the correct version of software for the type of machine
and unit. In this case - 10102718_S0018B_P0004B.Tcf - OK - Start up the machine
2
Table is displayed „Warning screen“.
ENTER,
ENTER
3
Table is displayed „PIN Number“.
All the data show Fault if the machine is not set up)!
ENTER
4
Table is displayed „Speed Control Main Menu“.
ENTER
5
Table is displayed „Speed Control“ select No.1 („AV 110 X“)
ENTER
6
Notes:
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
7
Ammann Unternehmungen
Eisenbahnstrasse 25
CH-4901 Langenthal
Phone +41 62 916 61 61
www.ammann-group.com