Documente Academic
Documente Profesional
Documente Cultură
Course Breakup
WEEK 1
Lectures Topics
Lect #1 Analysis of Stress and Strains at a Point due to combined effect axial force,
shear force and bending moment
Lect #2
WEEK 2
Lectures Topics
Lect #1 Analysis of Stress and Strains at a Point due to combined effect axial force,
Lect #2 shear force and bending moment
WEEK 3
Lectures Topics
Lect #1 Analysis of Stress and Strains at a Point due to combined effect axial force,
Lect #2 shear force and bending moment
WEEK 4
Lectures Topics
Lect #1 Mohr’s Circle for Stress and Strains
Lect #2
Assignment to be given during first four (4) weeks of teaching.
Assignment # 1. __________
WEEK 5
1
Lectures Topics
Lect #1 Mohr’s Circle for Stress and Strains
Lect #2
WEEK 6
Lectures Topics
Lect #1 Relationship between elastic constants, Strain Rossette Solution
Lect #2
WEEK 7
Lectures Topics
Lect #1 Curved Beams
Lect #2
WEEK 8
Lectures Topics
Lect #1 Curved Beams
Lect #2
1st Surprise Tests to be Conducted (date) ______________(should be conducted during 5-7 Week)
Mid Term Test :
WEEK 9
Lectures Topics
Lect # Theory of Yielding/Failure (Plastic Limit Analysis)
Lect #
WEEK 10
Lectures Topics
Lect # Cylinders
Lect #
WEEK 11
Lectures Topics
Lect # Cylinders
Lect #
WEEK 12
Lectures Topics
Lect # Column
Lect #
WEEK 13
Lectures Topics
Lect # Column
Lect #
WEEK 14
Lectures Topics
Lect # Torsion of Thin Walled Tubes and Non-Circular Members
Lect #
WEEK 15
Lectures Topics
Lect # Fatigue
Lect #
WEEK 16
Lectures Topics
2
Lect # Flat Plates
Lect #
Note: At least two assignments must be given during the whole semester and two Surprise tests must be conducted
before and after the mid-term examination respectively.