Documente Academic
Documente Profesional
Documente Cultură
Rear Mounted
Standard Specification Code: 1021212-03-UC
• 4m 150UC Beam • 250kg Hammer • 3 Bank Valve • Hydraulic Top link & Adjustment • Adjustable Leg
The KINGHITTER Series 2 is designed for rear mounting on a standard three point linkage,
it includes a fully hydraulically adjustable Top Link Ram and Angle Adjustment.
KINGHITTER Series 2
Rear Mounted Postdriver - 150 Beam
Model/code Description RRP
g.s.t. not included
Features:
• Universal Steel Mast is calculated to
allow the weight to drop at maximum
gravitation speed to produce maximum
kinetic energy producing up to
36,600kg of Driving Force
• Maximum post height 3m
• High Tensile ‘Live wound’ lifting cable
for maximum strength and extra life
• Easily mounts on standard tractor
three-point linkage or Skid Steer
• Accurate Hydraulic adjustment top
link gives 10º forward and 20º rear
movement and hydraulic side angle
adjustment left or right of 25º quickly
allows for accurate post placing on
undulating terrain
• Requires one person to operate
• Safety Post-cap transfers the driving
force where it counts, directly into the
post
• Custom designed “soft touch”
Hydraulic Valve Block
• Terminator Base with large tool box that mounts the beam to the side rather than the centre of the tractor.
This allows a 900mm side shift movement for safer and speedier operation.
• 250mm or 500mm Mast Shift allowing the position of the mast to be brought forward or back for greater positioning precision of the post
• Hydraulic Hinged Beam available on beams from 4.25m. This allows the beam to be easily raised and lowered by a Hydraulic
Ram that is operated at the fingertips of the machine operator at ground level
RRP
Model/code Optional Extras g.s.t. not
included
1150003 Rock Spike Extractor Kitset, 90mm spike, RSE Post cap, 1 extra work section not included: $475 ea $5,985
150 RSE & Combo Auger kit (Spikes & Augers sold separately). Includes Post cap,
1140004-0000 $7,800
2 work sections not included: $475 ea
1402008-8405 Rock Spike Rotator Kit, 1 extra work section not included: $475 ea $2,155
1140003-2411 Rock Spike Auger Combo Motor complete with hoses & Weight stop + 1 work section not included: $475 ea $2,870
1140006-3367 Ram Pilot Auger Kit includes Hydraulic motor and Weight stop, 2 work sections not included: $475 ea $4,300
1130010-2771 Mast Shift - 250mm (no Knuckle Ram), 1 extra work section not included: $475 ea $3,930
Mast Shift - 250mm factory fitted to new postdriver with Knuckle Top Link Ram required when fitted to
1130020-2771 $4,175
Terminator Base, 1 extra work section not included: $475 ea
Mast Shift - 500mm side movement - factory fitted with Knuckle Top Link on new postdriver, 1 extra
1130031-7151 $6,470
work section not included: $475 ea
Mast Shift- 500mm x 150mm side & end movement - factory fitted with Knuckle Top Link on new postdriver, 2
1130031-7154 $8,050
extra work sections not included: $475 ea. Factory fitted on new machines.
1103000 Terminator Base - 900mm side movement, 1 extra work section not included: $475 ea $6,565
1137003 Hydraulic leg, 1 extra work section not included: $475 ea $2,070
Contractor upgrade kit: 3” pivot pin, HD Pins & Bushes, HD Legs $2095