Documente Academic
Documente Profesional
Documente Cultură
Question No. 02
Select the statements that correctly describe flash memory in a 2600 series router? (Choose two.)
1. holds the startup configuration by default.
2. can be upgraded with single in-line memory modules.
3. stores Cisco IOS software images.
4. stores routing table information by default.
5. maintains the only copy of an IOS image after the router is booted.
Answer:
Question No. 03
Which of the following are functions of NVRAM? (Choose two.)
1. stores the routing table.
2. retains contents when power is removed.
3. stores the startup configuration file.
4. contains the running configuration file.
5. stores the ARP table.
Answer:
Correct answer: 2 and 3
Explanation: NVRAM stores the backup/startup configuration file for the router. It retains conten when
the router is powered down or restarted.
Question 04.
Which of the following descriptions are true regarding the management connections on a Cisco router?
(Choose three.)
1. They are non-network connections.
2. They are used to connect the router to the rest of the production network.
3. They are synchronous serial ports.
4. They are used for initial router configuration.
5. They are asynchronous serial ports.
6. They are accessed using their assigned IP address.
Answers:
Question No. 05
An internetwork must include which of the following? (Choose three.)
1. switching.
2. static addressing.
3. IETF standardization.
4. dynamic or static routing.
5. consistent end-to-end addressing.
Answer:
Question No. 06
Which of the following are functions of RAM? (Choose three.)
1. contains startup configuration file.
2. stores routing table.
3. holds fast switching cache.
4. retains contents when power is removed.
5. stores running configuration file.
Answer:
Question No. 07
Terminal emulatror software, such as HyperTerminal, can be used to configure a router. Which of the
following HyperTerminal options shown in the graphic are correctly set to allow configuration of a
Cisco router? (Choose three.)
1. bits per second.
2. data bits.
3. parity.
4. stop bits.
5. flow control.
Answer:
Question No. 08
Several Ethernet hosts on a LAN need the gateway services of a Cisco 2500 series router. Which of the
following would be needed to physically connect a router to all of the hosts on the LAN? (Choose two.)
1. a crossover cable between the transceiver on a router and a switch.
2. a crossover cables between a switch and hosts on a LAN.
3. a straight-through cable between the auxiliary port on a router and a switch.
4. a rollover cable between the console port on a router and a switch.
5. straight-through cables between a switch and hosts on a LAN.
6. a straight-through cable between the transceiver on a router and a switch.
Answer:
Question No. 09
Why is a console connection to a router or switch preferred when troubleshooting? (Choose two.)
1. can be accessed remotely.
2. does not depend on network services.
3. displays startup and error messages by default.
4. does not require special components.
Answer:
Question No. 10
What do routers use to select the best path for outgoing data packets?
1. ARP tables.
2. bridging tables.
3. routing tables.
4. switching tables.
Answer:
Correct answer: 3
Explanation: Router has a routing table and the routing table is used for outgoing data packets. So,
option 3 is the correct answer.
Question No. 11
Which of the following tasks can be accomplished through a management connection on a router?
(Choose three.)
1. troubleshooting problems.
2. monitoring the system.
3. capturing LAN data packets.
4. configuring the router.
5. routing data packets.
Answer:
Question No. 12
Which basic components do a router and a standard desktop PC have in common? (Choose three.)
1. CPU.
2. hard drive.
3. input/output interfaces.
4. keyboard.
5. monitor.
6. system bus.
Answer:
Question No. 13
Which of the following describes the function of a WAN?
1. connects peripherals in a single location.
2. connects multiple networks in a single building.
3. provides connectivity on a LAN.
4. provides connectivity over a large geographic area.
Answer:
Correct answer: 4
Explanation:WAN means Wide Area Network which connects a large geographical area network. So, 4
is the only one correct answer.
Question No. 14
ABC Company just purchased three new routers to start their company network. Which items are
needed to establish a terminal session between a PC and the router for the initial configuration?
(Choose three.)
1. straight-through cable.
2. terminal emulation software.
3. rollover cable.
4. RJ-45 to DB-9 connector.
5. V.35 cable.
Answer:
Question No. 15
During the initial configuration of a 2600 series Cisco router, which cable is required for connecting a
PC to the console port?
1. twisted
2. crossover
3. rollover
4. straight
Answer:
Correct answer: 3
Explanation: To connect a PC and a router, a crossover cable is used. But when you are configuring
your router, then a rollover cable is used. For more explanation, see explanation of question 08.
Question No. 16
What contains the instructions that a router uses control the flow of traffic through its interfaces?
1. packet configuration.
2. configuration files.
3. flash memory.
4. internal components.
Answer:
Correct answer: 2
Explanation: Only the configuration file can control the flow of traffic through its interface.So, option 2
is the correct answer.
Question No. 17
Which of the followings are true regarding router interfaces? (Choose three.)
1. provide temporary memory for the router configuration files.
2. connect the router to the network for packet entry and exit.
3. can be on the motherboard or a separate module.
4. hold the IOS image.
5. connect the router to LANs and WANs.
Answer:
Correct answer: 2 3 and 5
Explanation: By using a router, you can connect LANs and WANS. So, option 5 is correct. All the
interfaces are placed on motherboard. So, option 3 is also correct. By using the interfaces the packets
are coming and out. So, option 2 is also correct. So, option 2, 3 and 5 are the correct answers.
Question No. 18
Which of the following devices are used in the construction of a WAN? (Choose three.)
1. hubs.
2. routers.
3. communication servers.
4. transceivers.
5. modems.
6. multi-port repeaters.
Answer:
Question No. 19
Which router component holds the configuration file when power is lost?
1. volatile random access memory.
2. read only memory.
3. non-volatile random access memory.
4. flash memory.
Answer:
Correct answer: 3
Explanation: See the explanation of question 3.
Question No. 20
Which of the following layers of the OSI model are incorporated in WAN standards? (Choose two.)
1. physical layer.
2. application layer.
3. transport layer.
4. data link layer.
5. session layer.
Answer:
Correct answer: 1, 4
Explanation: Physical layer, Data Link layer and Network Layer are the incorporated in WAN
standards. So, 1 and 4 are the correct answers.