Documente Academic
Documente Profesional
Documente Cultură
2. Symbols
1 1
WS22GNA5 WS22ONA5
WS22GNZ5 WS22ONZ5
2
2
3. Characteristics
4. Performance characteristics
Oil viscosity 33 cSt solenoid at steady--
state temperature, 10% under--voltage
∆p--Q characteristic ∆p--Q characteristic
flow direction 1 ⇒ 2 and 2 ⇒ 1 flow direction 1 ⇒ 2 and 2 ⇒ 1
WS22GNA5/ WS22GNZ5 WS22ONA5/ WS22ONZ5
40 25
20 1⇒2
30
→ ∆p (bar)
15 2⇒1
→ ∆p (bar)
20
10
10
5
5 10 15 20 25 30 5 10 15 20 25
→ Q (l/min) → Q (l/min)
150
” Pe (bar)
100 100
50 50
5 10 15 20 25 30 5 10 15 20 25 30
→ Q (l/min) → Q (l/min)
Switching times: Flow direction 1 ⇒ 2 and 2 ⇒ 1 Switching times: Flow direction 1 ⇒ 2 and 2 ⇒ 1
ø 30 Manual
override
Clearance to
remove plug
12
11
PG 9
ø 36
58
72
53
101 (98)
Model code
24 A/F hexagonal.
WS22G Tightening torque
8
Ma = 36 ... 44 Nm
for fitting the cartridge
12,5
3/4”--16 UNF
(M20 x 1,5)
Line mounting body, type GALA
29 (26)
ø 13 1
for M20 x 1,5 cartridges
Cavity type AL
2 3/4”--16 UNF
Dimensions in ( ... )
apply to M20 x 1.5 ø 15,8 Cavity type AL
models. M20 x 1,5
6. Schematic section
3 Seal kit no. DS--246, comprising *):
Seal kit no. DS--245, comprising **):
Itm. Qty. Qty. Description Dimension
1 1*) 1**) O--ring no. 017 ∅ 17,17 x 1,78 N90
2 1*) -- O--ring no. 014 ∅ 12,42 x 1,78 N90
2 -- 1**) O--ring no. 013 ∅ 10,82 x 1,78 N90
3 2*) 2**) O--ring ∅ 16,00 x 2,00 Viton
4 2*) -- Backup ring ∅ 10,7 X 1,45 X 1,0 FI0751
4 -- 2**) Backup ring ∅ 9,9 X 1,45 X 1,4 FI0751
WS22GNA5
WS22GNZ5
4 2
2
400-- P-- 121100-- E-- 0c/01.00 3/4
7. Installation and servicing
All installation and servicing must be the new seals must be thoroughly oiled the correct tightening torque when fit-
carried out with care, and by qualified or greased before they are fitted. Use ting the cartridge.
personnel only. When changing seals,
8. Reliability information
In accumulator systems, the user must either flow direction. In applications dwell periods under pressure, please
ensure that the maximum flow rate of where the valve is subjected to long contact BUCHER.
30 l/min (25 l/min) is not exceeded in