Documente Academic
Documente Profesional
Documente Cultură
Power Supply
GX and GXR-Series
• True output power display
Nett Power is the true power • MOSFET output stage
True power is perfect impendance every time • Frequency controlled impedance
Total quality control demands repeatable nett power output matching resulting in optimum
energy savings
• Output Range from 1.0kW to 40kW
• CE Marked, EMC compatible
Corporate Corona Competence
Nett Power
The requirement of the industry to know
the true nett power dissipated by the Co-
rona Generator at the web has been met
by Sherman Treaters. The GXR series
of Sherman Corona Generators operate
with a quantitative measure of the quality
of the match between the generator and
the output load.
Computer Interface
The GRX range of generators has capabi-
lity of providing …
Featuring: … voltage free (dry) contacts for the
GX10/GX20 • User friendly. No skills required status of safety interlocks, roll rotation,
115/230V 1 Phase 50/60Hz • EMC compatible cicuit protection circuits, impendance
• Diagnostics matchin alarms, and output level alarms.
Dimensions and specifications subject to change without notice. Certified dimensions available on request.
GX30–GX400R • Amphenol plugs and sockets … Analogue input and signals (0 – 10V
380/400/420/460/480V 3 Phase 50/60Hz • Audible, visual or computer alarms, and or 4 – 20 mA) proportional to power
loss of treatment indicators demand an power output signals inclu-
• Treatment level alarm control with ding teactive power.
high/low limits … Digital input signal capability (5 – 20
• Underspeed switching for dielectric Volt d.c.) for control the generator start/
and web break protection stop and rest functions.
• Wet Start - humitidy control
• Remote controls
• Interlock safety circuitry
• Optimum frequency
* Contact your ITW-ST agents for customized information.
Business Contact: Pillar Technologies | 475 Industrial Drive | Hartland, WI 53029-0110, USA | Phone +1 262-912-7200 | Fax: +1 262-912-7272 | info@pillartech.com | www.pillartech.com
Service Partner: ITW Surface Treatment Service Center Europe and Asia | Blauenstrasse 67– 69 | 79576 Weil am Rhein | Germany | Phone +49 7621 7905-510 | Fax: +49 7621 7905-511 | service@itw-st.com | www.pillartech.com