Documente Academic
Documente Profesional
Documente Cultură
SEMESTER SYSTEM
SYLLABUS
I YEAR SYLLBUS
(Basic Engineering)
(Common to all Branches)
Civil Engineering
III Semester
IV Semester
V Semester
VI Semester
SEMESTER :I
BLOCK 2 Grammar
Unit 1: One word substitute
Unit 2: Articles and question tags
Unit 3: Prefixes and suffixes
Unit 4: Tenses
BLOCK 3 Composition
Unit 1: Comprehension
Unit 2: Simple passage
Unit 3: Moral story
Unit 4: Science and technology
BLOCK 5 Prose
Unit 1: An Astrloger's day – R.K. Narayanan
Unit 2: The sun, The planets and the stars – C.Jones
Unit 3: The continuing spell of Ramanujam
Unit 4: On saying 'please' – A.G.Gardiner
Books :
1. A.S.Hornby, 'The advanced learners Dictionary of current English', Oxford
university press.
2. Longman Basic English dictionary Ist Edition Pearson Longman
SEMESTER :I
BLOCK 1 Algebra
Unit 1: Determinants
Unit 2: Matrices
Unit 3: Permutation and combination
Unit 4: Binomial Theorem
BLOCK 4 Trignometry
Unit 1: Compound angles
Unit 2: Multiple angles
Unit 3: Sub multiple angles
Unit 4: Sum and product formulae
Books :
BLOCK 3 Dynamics
Unit 1: Projectile Motion
Unit 2: Angle of projection
Unit 3: Circular Motion
Unit 4: Application of circular motion
Books :
BLOCK 2 Pollution
Unit 1: Air Pollution
Unit 2: Global warming
Unit 3: Water Pollution
Unit 4: Green Chemistry
Books :
Practicals
Windows
1.a. Starting a program, running a program.
b. Starting the Windows in safe mode
c. Running multiple Programs and switching between windows.
d. Moving the windows, and the task bar.
e. Startup to MS-DOS prompt.
2.a. Creating and removing a folder.
b. Making the taskbar wider, arranging icons on the Desktop.
c. Displaying and hiding the taskbar clock.
d. Controlling the size of start menu options.
e. Creating shortcuts.
3.a. Installing a screen saver.
b. Assigning Wallpaper to Desktop.
c. Adding a program to the start menu.
d. Recovering files and folders from Recycle bin.
e. Customizing the mouse settings.
4 a. Expanding and collapsing a folder.
b. Recognizing file types using icons.
c. Running a program from explorer.
d. Renaming a file or folder.
e. Selecting two or more files for an operation.
5.a. Displaying the properties for a file or folder.
b. Using cut and paste operations to copy a file.
c. Using copy and paste operations to copy a file.
d. Moving and copying files with mouse.
e. Sorting a folder.
6.a. Finding a file or folder, by name.
b. Defragmenting the disk using disk defragmenter.
c. Compressing a file using WinZip.
d. Controlling the speaker volume.
e. Recording and saving an audio file.
MS Word
a. Prepare a newsletter with borders, two columns text, header and footer and a graphic
image and spell check the document.
b. Create a table to show the paradigm of the verb “eat” in all 12 tenses
c. Prepare your Bio-data/Resume
d. Do the mail merge operation for sending applications to many companies with your
resume
MS EXCEL
1.Create a worksheet in Excel for a company:
a. Copy, Move and Merge the cells
b. Adding Comments
c.Adding, Deleting the cells, Rows and Columns
d. Hiding and Unhiding the columns, Rows and gridlines.
2.Using formula and functions prepare worksheet for storing subject marks of ten
studentsand perform the following:
a. Calculate the student wise total and average
b. Calculate the subject wise total and average
c. Calculate the overall percentage and also individual percentage of the student.
3. Create Bar Graph and Pie Chart for various data
MS Power Point
a. Create a simple presentation with atleast 5 slides to introduce your friend and include
sounds in slides.
b. Create a presentation with 5 slides for the essay Astrologer’s Day by R.K Narayanan
Internet
a. Creating an E-Mail account.
b. Sending an E-Mail to a known Address
c. Viewing an E-Mail received from your friend/relative.
d. Printing an E-Mail received
e. Use of Attachment Facility
f. Use of Address Book Facility
g. Use of Sent Folder
h. Use of Save Draft Folder
i. Use of Trash Folder
j. Browse a given web-site address.
k.Search a Particular topic through a Search engine.
SEMESTER :I
Sheet Metal
1. Hemming
2. Seaming
3. Tray
4. Cylinder
5. Cone
6. Hopper
7. Dust Pan
8. Funnel
SEMESTER : II
BLOCK 3 Differentiation
Unit 1: Velocity and Acceleration
Unit 2: Tangents and Normals
Unit 3: Maxima and Minima
Unit 4: Partial differentiation
Books :
BLOCK 1 Heat
Unit 1: Heat - Kinetic Theory of Gases:
Unit 2: Specific Heat
Unit 3: Isothermal Changes
Unit 4: Adiabatic Changes
BLOCK 4 Electricity
Unit 1: Basic laws
Unit 2: Force on a moving charge
Unit 3: Measuring Instruments
Unit 4: Heating Effect of Electric Current
Books :
BLOCK 5 Metallurgy
Unit 1: Tungsten &Titanium
Unit 2: Powder metallurgy
Unit 3: Purpose of alloying
Unit 4: Non ferrous alloys
Books :
BLOCK 2 Projection
Unit 1: Orthographic Projection
Unit 2: Projection of simple solids
Unit 3: Section of Solids
Unit 4: Half & Full Sectioning
BLOCK 5 AutoCAD
Unit 1: Introduction
Unit 2: AutoCAD commands
Unit 3: Drawing -line, circle, arc, polygon,
Unit 4: Drawing - ellipse, rectangle
Books :
Drawing Pratices
SEMESTER : II
List of Experiments
1 VERNIER CALIPERS - To find the volumes of the solid cylinder and hollow cylinder
using vernier callipers.
2 SCREW GAUGE – To find the thickness of (a) glass plate (b) given sphere using screw
gauge. Hence calculate the volume of the glass plate and the sphere.
3 SIMPLE PENDULUM – To find the acceleration due to gravity in the laboratory, using
simple pendulum. Calculate the acceleration due to gravity, by L–T2 graph.
4 CONCURRENT FORCES -To verify the parallelogram law of forces and Lami’s
theorem.
6 TORSION PENDULUM – To find the rigidity modulus of the thin wire and moment of
inertia of the disc by using symmetric masses.
17 OHM’S LAW – To determine the resistance of two given coils of wire using Ohm’s
law. Also verify the laws of resistances.
19 PN JUNCTION DIODE – For the given semiconductor diode draw (a) Forward bias
(b) Reverse bias characteristic curves.
List of Experiments
1. Qualitative Analysis
PERMANGANIMETRY
5. Estimation of Ferrous Ammonium Sulphate
6. Estimation of Ferrous Sulphate
7. Comparison of Potassium Permanganate.
WATER ANALYSIS
8. Estimation of Total Hardness by EDTA method.
9. Calculation of pH of four sample solutions and calculation of H+ Ion
concentration for a particular sample solution.
SEMESTER : III
BLOCK 5 Deflections
Unit 1: Beams
Unit 2: Friction
Unit 3: Gear Drives
Unit 4: Belt Drives
Books :
1. Applied Mechanics by A.K.Upadhyay, Charotar Publishers
2. Strength of Materials by R.S.Khurmi, S.Chand & Co
SEMESTER : III
BLOCK 2 PLANNING
Unit 1: Principle of Planning
Unit 2: Planning of residential building
Unit 3: Standard sizes of Door, Windows and ventilators
Unit 4: Planning of rooms
Unit 5: Preparation of line sketch for a single & Double bed room residential
Building
1. Chain Survey
1.1 Chaining and ranging a line.
1.2 Chaining and taking offsets
1.3 Determination of area of a plot. (One chain line and at least two offsets on either side
of chain line)
2. Compass Survey
2.1 Setting up Prismatic compass over a station and observing bearing of a line
2.2 Closed traverse and finding the included angles – Minimum 5 Points
3. Levelling
3.1 Temporary adjustment of Dumpy level taking readings and booking
3.2 Fly levelling – Reduction by Height of Collimation – Minimum 6 Points with two
change points ( Minimum Four Exercises)
3.3 Fly levelling – Reduction by Rise and fall – Minimum 6 Points with two change
points.
3.4 Check levelling and reduction of levels a. By Height of Collimation Method b. By
Rise and fall Method.
4. GPS
4.1 Reading of various map like a. District Map b. Taluk Map
4.2 Study of handled GPS
4.3 Measurement of latitude and longitude using handled GPS
4.4 Selection of routing (Points) using handled GPS
SEMESTER : III
Laboratory Experiments :
2. Hardness Test
3. Torsion test
5. Impact test
7. Shear test
BLOCK 5 BRIDGES
Unit 1: Bridge definition – Components and Classification of a bridge
Unit 2: Site selection and alignment
Unit 3: Foundation
Unit 4: Substructure & Superstructure
Unit 5: Bridge bearings
Books :
1. Kadiyali L R, Principles and Practice of Highway Engineering, Khanna Technical
Publications, Delhi, 2000.
2. Khanna K and Justo C E G, Highway Engineering, Khanna Publishers, Roorkee, 2001.
SEMESTER : IV
BLOCK 3 Lighting
Unit 1: Artificial and natural lighting
Unit 2: Different types of lighting and their effects
Unit 3: Requirement of light for specific purpose
Unit 4: Locating lighting points in interiors and planning electrical layouts
BLOCK 5 Furniture
Unit 1: Furniture design as related to human comfort, functions
Unit 2: Methods of construction
Unit 3: Materials
Unit 4: Innovations and design ideas
Books :
1. Designing and decorating interiors - David Van Dommalan
2. National Building code of India - B.I.S
3. Time-saver standard building types – Callendar
SEMESTER : IV
BLOCK 3 River
Unit 1: River basin management
Unit 2: River training works
Unit 3: Storages works
Unit 4: gates
Books :
1. Santhosh Kumar, Garg, Hydrology and water resources engineering,-
2. R.K.Sharma, T.K.Sharma, Irrigation Engineering ,
3. Ralph A.Warbs, Wesley P.James, Water Resources Engineering ,
SEMESTER : IV
2. Draw the Given drawings in Computer and take print out of all drawings in A4 sheet
using INKJET/LASER PRINTER or PLOTTER and produced in file forms as regard.
1. Theodolite
2. Tacheometry
3. Total Station
3.1 Study of Total Station
3.2 Measurement of distance and co-ordinates of given points minimum 6 points
3.3 Measurement of altitude of given elevated points
3.4 Traverse and plotting using Total Station (Local Points)
SEMESTER :V
Subject Code : DTC1
Subject Title : STRUCTURAL ENGINEERING
BLOCK 4 Columns
Unit 1: Design of columns by l.s.m
Unit 2: Design of axially loaded short columns with lateral ties / helical
reinforcement
Unit 3: Design of column footings.
Unit 4: Problems on Design of Size of Footing and area of steel only
BLOCK 5 STEEL STRUCTURES
Unit 1: Design of Simple Beams
Unit 2: Design of Tension Members
Unit 3: Design of Compression Members
Unit 4: Design of Welded Connections
Books :
1. S.R.Karve and V.L.Shah,” Limit state Theory and Design of Reinforced Concrete”,
Pune Vidya Griha Prakashan,1986.
2. P C Varghese,” Limit state Design of Reinforced Concrete”,Prentice-Hall of India Pvt.
Ltd”,1997.
3. Dr.S.Ramachandra,” Limit State Design of Concrete Structures”,Scientific publishers
SEMESTER :V
Subject Code : DTC2
Subject Title : QUANTITY SURVEYING
BLOCK 1 Estimate
Unit 1: Terms & Definition
Unit 2: Approximate Estimates
Unit 3: Measurements & Material Requirement
Unit 4: Specification & Report Writing
BLOCK 3 Estimation
Unit 1: Stages Of Detailed Estimate
Unit 2: Group System
Unit 3: Process Of Writing
Unit 4: Abstracting And Billing
Unit 5: Taking Off Quantities
Books :
1. Civil Estimating, Casting and Valuation – Kalson Publication Ludhiuyana.
2. Rangawala,” Estimating & Casting, Charotor Publishing, 8th Edition,1990.
3. N.A.Shaw,” Quantity surveying & Valuation”, Khana Publishers,2001.
SEMESTER :V
Books :
1. M.S. Shetty ,”Concrete Technology”, S.Chand & Co,New Delhi,2004.
2. S.P.Arora and S.P.Bindra,”Fire Resistant Construction”, Dhanpat Rai & sons,1998.
SEMESTER :V
BLOCK 1 Water
Unit 1: Water Supply
Unit 2: Quantity of water
Unit 3: Collections and conveyance of water
Unit 4: Quality of water
Books:
1. S.K. Garg,” Water supply and Sanitary Engineering” Kanna publishers, Delhi 5th
Edition ,2001.
2. K.S. Rangwala, “ Water supply and Sanitary Engineering”
SEMESTER :V
1. Infiltration gallery (with one infiltration well, one straight gallery pipe, one inspection
well and one jack well).{Practice Only}
2. Rapid Sand Filter.
3. Septic Tank with dispersion Trench/ Soak pit.
4 Bio gas plant. (Floating type)
5 R.C.C square overhead tank supported by four columns.
SEMESTER : VI
Subject Code : DTC7
Subject Title : CONSTRUCTION MANAGEMENT
Books :
2. Dr. Jagadish Lal - Hydraulics, Fluid Mechanics and Hydraulic Machines –
Metropolitan Book Company- New Delhi
3. P.N. Modi & S.M. Sethi - Fluid Mechanics - Standard Publishers – New Delhi
4. S. Ramamirtham - Hydraulics, Fluid Mechanics and Hydraulics Machines –
Dhanpat Rai & Sons – New Delhi
SEMESTER : VI
Books :
1. K.S.Rangwala and P.S.Rangwala,. “Town Planning ”,Charotar Publishing House,15th
Edition,1999.
2. Michael Hord, R. Remote sensing methods and application, John Wiley and Sons,
New York, 1986.
SEMESTER : VI
2. Detailed drawing generation for given specification and Bar Bending Schedule using
available R.C.C Detailing Package Only,for the following works.
.
Students should not draw drawings directly using AutoCad package they should use
only available R.C.C Detailing packages.(Example: CADS RC: Reinforced Concrete
Detailing Software with AutoCAD Environment, etc.,)
a. Cross section of a Lintel cum Sun Shade.
b. Plan and section of a column and Footing (square footing)
c. Plan and sectional view of One-Way slab.
d. Longitudinal Section and cross section of Singly Reinforced Beam.
3. Carry out the analysis and design of RCC structures (single storey buildings, school
etc) using available Software Packages.(Struds on Windows, STADD PRO, CADS
A3D.,etc)
4 Develop the CPM/PERT Network for the Proposed simple Building Project using
MSProject.
SEMESTER : VI
Resources