Documente Academic
Documente Profesional
Documente Cultură
3
Sulzer ISO/ANSI Process Pumps
4
CPT Process Pump MBN Ring Section Pumps
The CPT chemical process The MBN ring section mul-
pump is designed for con- tistage pump is the ideal
tinuous operation in process choice for medium pressure
industries for pumping, clean, pumping applications. The
abrasive or corrosive liquids. pump is offered in a wide
The pump is designed to range of materials including
exceed ANSI (ASME B73.1M) duplex stainless steel grades.
pump standards. The pump utilizes integrated
Pressure 16 bar / 230 psi diffusers and a product lubri-
Temperature 260 °C / 500 °F cated NDE bearing to simplify
construction, minimize dimen-
sions and reduce cost.
Pressure 100 bar / 1450 psi
Temperature 180 °C / 355 °F
5
Sulzer Pumps Selfpriming Concept
Mechanical Seals
6
Sulzer Pumps Installation Concept
ISO 13709 (API 610) style full drain rim base: available
for grouted and non-grouted installation; designed for
petroleum industry applications for both ISO and ANSI
pump ranges.
• ANSI style 2 - similar to ANSI style 1 with reinforced • ISO rectangular frame base - steel base plate with
end caps. slopped drip pan and welded drain and lifting points.
• ANSI drip lip style 3 - similar to ANSI style 2 with • Concrete base - steel base embedded in concrete for
sloped rim to welded drain. fast site installation.
• PIP base - base plate designed to PIP standards • V-belt base - base plate designed for V-belt drive motor
with raised mounting pads and drip rim. installation.
• Non-metallic base - polymer composite base with
stainless steel inserts. Designed for highly corrosive
conditions.
7
www.sulzerpumps.com
hpi.pumps@sulzer.com