Documente Academic
Documente Profesional
Documente Cultură
®
Bluetooth
Handsfree Headset Before using this product, read the Important Safety and Legal
Information pamphlet and follow its instructions.
Call Button/
Slide Switch Multi-Color
Indicator Light
Volume
Buttons
Microphone
Speaker
(on reverse
side)
H670 Get connected in 4 quick steps.
If the headset does not enter pairing mode, © Motorola, Inc. 2007.
see TROUBLESHOOTING for help.
3 PAIR CONTINUED
Your Phone
4 TEST AND USE
Step B - SET YOUR PHONE TO LOOK FOR Your phone and headset are now paired and
YOUR HEADSET ready to make and receive calls.
To make a call:
For most Motorola phones:
1 Place the headset over your ear.
1 On your Motorola phone, press M (Menu ) >
Settings > Connection > Bluetooth Link > 2 On the phone, dial the number you want to
Handsfree > Look for Devices. call and press SEND key on your phone.
The phone lists Bluetooth devices it finds. 3 If your phone and headset are successfully
2 Select Motorola H670. paired, you will hear ringing on the headset.
3 Select OK or Yes to pair your headset with After you have successfully paired your
your phone. phone and headset, you don't need to
repeat these steps. For daily use, ensure
4 Enter the passkey: 0000 that your headset is turned ON and that
5 Select OK. your phone's Bluetooth feature is ON.
When your headset successfully pairs and
connects with your phone, the indicator light To save battery power, turn OFF the
changes from steadily lit to flashing blue. headset when you don't use it for an
extended time by sliding the switch
Note: These steps are for most Motorola phones. towards the charging plug.
For other phones, see your phone's user's guide.
USING YOUR H670 TROUBLESHOOTING
My headset will not enter pairing mode.
See Make sure that any devices previously paired
Features and with the headset are turned off. If the indicator
Functions Guide light is not steadily lit in blue, turn off both the
on the reverse side other device and headset, wait 10 seconds,
for information on then turn headset back on. Wait for the indicator
using your H670 light to become steadily lit in blue, indicating
the headset is now in pairing mode.
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2).
Note: If desired, your headset can be restored to original
If the Bluetooth feature was turned off or was
factory settings. This action will erase all pairing information
turned on only temporarily, you may need to
stored in your headset. Thus, you will need to pair your restart the Bluetooth feature (see step 2) and
phone and headset again (see step 3). pair your phone and headset again (see step 3).
To restore your headset to original factory settings, press Support.
and hold both Volume buttons and the Call button at the If you need more help, contact us at
same time for 10 seconds. 1-877-MOTOBLU or visit us at
www.hellomoto.com/Bluetoothsupport
2 Press and hold the Volume button you • All other relevant EU Directives.
want to assign as the "volume up" button
and slide the switch toward the
microphone. The indicator light is either
steadily lit or flashing in blue. Product
Approval
Number