Documente Academic
Documente Profesional
Documente Cultură
NAVIGATION AV SYSTEM
AVIC-F910BT
AVIC-F710BT
AVIC-F9110BT
Be sure to read “Important Information for the user” first!
“Important Information for the user” includes the
important information that you must understand before
using this navigation system.
English
Contents
2 Engb
Contents
Engb 3
Contents
4 Engb
Contents
Engb 5
Contents
6 Engb
Contents
Engb 7
Chapter
01 Introduction
8 Engb
Chapter
Introduction 01
Introduction
! iPhone 3G; Ver. 2.2
Video viewing p In this manual, iPod and iPhone will be re-
This product incorporates copyright protection ferred to as iPod.
technology that is protected by method claims p When you use this navigation system with
of certain U.S. patents and other intellectual a Pioneer USB interface cable for iPod (CD-
property rights owned by Macrovision IU230V) (sold separately), you can control
Corporation and other rights owners. Use of an iPod compatible with this navigation
this copyright protection technology must be system.
authorised by Macrovision Corporation, and is p To obtain maximum performance, we re-
intended for home and other limited viewing commend that you use the latest software
uses only unless otherwise authorised by for the iPod.
Macrovision Corporation. Reverse engineering p Operation methods may vary depending on
or disassembly is prohibited. the iPod models and the software version
of iPod.
p For more details about iPod compatibility
Notice regarding MP3 file with this navigation system, refer to the in-
formation on our website.
usage
Supply of this navigation system conveys only
a licence for private, non-commercial use and Map coverage
does not convey a licence nor imply any right
to use this product in any commercial (i.e. rev- For more details about the map coverage of
enue-generating), real time broadcasting (ter- this navigation system, refer to the information
restrial, satellite, cable and/or any other on our website.
media), broadcasting/streaming via internet,
intranets and/or other networks or in other
electronic content distribution systems, such Protecting the LCD panel
as pay-audio or audio-on-demand applica- and screen
tions. An independent licence for such use is
required. For details, please visit p Do not allow direct sunlight to fall on the
http://www.mp3licensing.com. LCD screen when this product is not being
used. Extended exposure to direct sunlight
can result in LCD screen malfunction due
to the resulting high temperatures.
iPod compatibility p When using a mobile phone, keep the aer-
This product supports only the following iPod ial of the mobile phone away from the LCD
models and iPod software versions. Others screen to prevent disruption of the video in
may not work correctly. the form of spots, coloured stripes, etc.
! iPod nano first generation; Ver. 1.3.1 p To protect the LCD screen from damage, be
! iPod nano second generation; Ver. 1.3.1 sure to touch the touch panel keys with
! iPod nano third generation; Ver. 1.1.3 your finger and gently touch the screen.
! iPod nano fourth generation; Ver. 1.0.3
! iPod fifth generation; Ver. 1.3
! iPod classic; Ver. 2.0
! iPod touch first generation; Ver. 2.2
! iPod touch second generation; Ver. 2.2
Engb 9
Chapter
01 Introduction
10 Engb
Chapter
Basic operation 02
4 3 2 1
Basic operation
5
6
Engb 11
Chapter
02 Basic operation
12 Engb
Chapter
Basic operation 02
Basic operation
Insert it with the contact surface facing to the CAUTION
left and press the card until it clicks and com- ! To prevent data loss and damage to the sto-
pletely locks. rage device, never remove it from this naviga-
tion system while data is being transferred.
! If data loss or corruption occurs on the sto-
rage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption.
! Never remove the USB storage device immedi-
ately after plugging it. It may cause that the
navigation system cannot recognise the exter-
nal storage device (USB, SD).
p This system is not compatible with Multi
Media Card (MMC).
p Compatibility with all SD memory cards is Plugging in a USB storage device
not guaranteed.
% Plug a USB storage device into the USB
p This unit may not achieve optimum perfor-
connector.
mance with some SD memory cards.
p Do not insert anything other than SD mem- USB connector
ory cards or dummy SD cards into the SD
card slot.
Engb 13
Chapter
02 Basic operation
14 Engb
Chapter
Basic operation 02
Basic operation
For safety reasons, the rear view camera function
is not available until the navigation system boots
up completely.
Engb 15
Chapter
02 Basic operation
2 3 4
5 6
7 8
16 Engb
Chapter
Basic operation 02
What you can do on each menu 1 Press the MENU button to display the
1 Top Menu
“Top Menu”, and then touch [Settings].
Press the MENU button to display the “Top
Basic operation
2 Touch [System Settings] and then touch
Menu”. [Back Camera].
This is the starting menu to access the desired
screens and operate the various functions. 3 Touch [On] next to “Camera” to acti-
2 Destination Menu vate the camera setting.
You can search for your destination on this
menu. You can also check or cancel your set 4 Press the MENU button to display the
route from this menu. “Top Menu” and then touch [AV Source].
3 Contacts screen
5 Touch [RearView] on the “AV Source”
You can access the list of contacts to call up
menu.
an entry.
= For details, refer to Using hands-free
phoning.
4 AV Source menu
You can access the screen for selecting the
audio and visual source to play.
5 Phone Menu
You can access the screen that is related to
hands-free phoning to see call histories and
change the settings on the Bluetooth wireless
technology connection.
6 Settings Menu
You can access the screen to customise set-
tings.
7 Map screen
Press the MAP button to display the naviga-
tion map screen.
8 AV operation screen
This is the screen that normally appears when
you play the AV source. Touching the icon on
the top left corner displays the “AV Source”
menu.
p To return to the previous screen, touch
.
Engb 17
Chapter
02 Basic operation
18 Engb
Chapter
Basic operation 02
This key will be displayed while you activate = For details, refer to Map Settings on
the dummy run (“Fly over” or “Demo page 108.
Mode”). Touch the key to cancel the dummy p The estimated time of arrival is an ideal
Basic operation
run. value that the navigation system com-
= For details, refer to Demo Mode on putes internally as the route is calcu-
page 112. lated. The estimated time of arrival
= For details, refer to Playing simulated tra- should be read just as a reference value,
vel at high speed on page 42. and does not guarantee arrival at the
9 Album artwork on iPod time indicated.
If you connect your iPod to this navigation sys- g Map scale
tem, the artwork for the album that is playing The scale of the map is indicated by distance.
appears. h Second Manoeuvre Arrow*
a Shortcut to the AV operation screen Shows the turning direction after next and the
The AV Source currently selected is shown. distance to there.
Touching the indicator displays the AV opera- p This item is not shown when “Full
tion screen of the current source directly. Screen Map” is set to “On”.
b Extension tab for the AV information bar = For details, refer to Map Settings on
Touching this tab opens the AV information page 108.
bar and enables you to briefly view the current
status on the AV source. Touching it again re- Meaning of guidance flags
tracts the bar.
: Destination
c Current route* The checkered flag indicates your
The route currently set is highlighted in bright destination.
colour on the map. If a waypoint is set on the
: Waypoint
route, the route after the next waypoint is The yellow flags indicate your way-
highlighted in another colour. points.
d Current position
: Start point
Indicates the current location of your vehicle. The bright green flag indicates
The apex of the triangular mark indicates your your start point.
orientation and the display moves automati-
cally as you drive. Signpost and recommended lane
p The apex of the triangular mark is the Signposts will appear together with the recom-
proper current position. mended lane where multi-lane roads exist
e Street name (or city name) that your vehi- when you are driving on your route. The high-
cle is travelling along lighted lane indicates the recommended lane.
f Multi-Info window
Shows the value on the items selected on
“Displayed Info”. Touching this area allows
you to display the “Route Information”
screen.
= For details, refer to Displayed Info on
page 109.
= For details, refer to Checking the current
route conditions on page 41.
p This item is not shown when “Full
Screen Map” is set to “On”.
Engb 19
Chapter
02 Basic operation
p This information is based on the map data- When “Heading up” mode is selected, is
base. Thus, the information may differ from displayed.
actual conditions. Use it as just a direc- 2D map screen (North up mode)
tional reference for your driving.
20 Engb
Chapter
Basic operation 02
Basic operation
ward once allows you to change the map
scale one step at a time. Holding MULTI-CON-
TROL while moving it up or down allows you
to change the scale sequentially.
Cursor
p Zooming out will reduce the size of the icon Changing the tilt and rotation
and further zooming out will hide it. How- angle of the map
ever, the pin-shaped icon is not resized and
On the 3D map screen, briefly touching the
keeps displayed.
map shows the tilt controls and rotation angle.
p Further zooming out hides the lines of traf-
fic information. 1 Press the MAP button to display the na-
vigation map screen.
Scrolling the map to the 2 Switch to the 3D map screen.
position you want to see = For details, refer to Switching the map mode
1 Press the MAP button to display the na- on the previous page.
vigation map screen.
Engb 21
Chapter
02 Basic operation
j
2 Display the “Destination Menu”.
j
3 Select the method of searching for your
destination.
Controls for tilt and rotation angle
j
6 The navigation system calculates the route
to your destination, and then shows the
route on the map.
j
7 After releasing the handbrake, drive in ac-
cordance with navigation guidance.
4 5
1 Screen title
The screen title appears.
22 Engb
Chapter
Basic operation 02
2 Current page/total pages Each touch of [aA] changes the setting as fol-
3 lows:
Returns the previous screen. — enables you to capitalise the first
Basic operation
4 letter of a word.
Touching or on the scroll bar scrolls — enables you to enter letters in
through the list and allows you to view the re- lower-case. (When a space is entered, it
maining items. switches automatically.)
5 Listed items — enables you to enter letters with
Touching an item on the list allows you to nar- capitals (caps) lock.
row down the options and proceed to the next 8 [@/!]:
operation. Displays the key to enter special characters,
such as [!].
Operating the on-screen p The appearance of this key and typeable
keyboard characters change according to the cur-
rent keyboard layout.
1 2 3 4 5 6
9 [Keys]
Switches the on-screen keyboard layout.
a [Done]
Confirms the entry and allows you to proceed
to the next step.
7 8 9 a
1 Text box
Displays the characters that are entered. If
there is no text in the box, an informative
guide with text appears.
2 Screen title
The screen title appears.
3 Keyboard
Touch the keys to enter the characters.
4 Number of possible choices
5
Returns the previous screen.
6 :
Deletes the input text one letter at a time, be-
ginning at the end of the text. Continuing to
touch the button deletes all of the text.
7 Caps lock control
Switches the keyboard between lowercase let-
ters and uppercase letters.
Engb 23
Chapter
2 Touch [Address].
CAUTION
For safety reasons, these route-setting functions
are not available while your vehicle is in motion.
To enable these functions, you must stop in a
safe place and put on the handbrake before set-
ting your route.
24 Engb
Chapter
5 Touch the key next to “City:” to enter 8 Enter the street name and touch the de-
the city name. sired one from the list.
! When a street is already set, touching
[Street Centre] allows you to select the re-
presentative point of the street and proceed
Engb 25
Chapter
If only one option is appropriate for your entry, The number of nearby POIs will appear at the
the screen will jump to the bottom of the screen.
“Map Confirmation Screen” directly and the pro-
cess of entering the street name or house num- 4 Touch the category you want.
ber will be skipped. If you do not want that
location, touch to retry with another ad-
dress.
1 Touch [Destination] on the “Top Menu”, 5 Touch the POI you want.
and then touch [POI].
26 Engb
Chapter
Engb 27
Chapter
1 Touch [Destination] on the “Top Menu”, from the list repeatedly until your desired cate-
and then touch [POI]. gory appears.
28 Engb
Chapter
7 Enter the name and then touch [Done] 5 Touch one of the options at the bottom
to complete the entry. of the “Map Confirmation Screen” to select
the next operation.
Engb 29
Chapter
Searching for POIs by using 5 Touch one of the items on the list.
the data on external
storage devices (USB, SD)
Creating a customised POI is possible by
using the utility programme “NavGate FEEDS”
which is available separately, on your PC.
(“NavGate FEEDS” will be available on our
website.) Storing the customised POI properly
and connecting the external storage device
(USB, SD) enables the system to use the data
for searches. 6 Touch one of the options at the bottom
of the “Map Confirmation Screen” to select
1 Connect the USB device or insert the SD the next operation.
card.
30 Engb
Chapter
1 Touch [Destination] on the “Top Menu”, 4 Touch to delete the current value
and then touch [Route Function]. and enter the desired coordinate.
5 Touch [Done].
The screen returns to the previous screen.
Touch the other key that you have not entered
yet, enter the latitude or longitude and then
touch [Done] to finish the entry.
6 Touch [OK].
Engb 31
Chapter
Touch [Route...] then [Go Here Now] to set Touch [Route...] then [Go Here Now] to set
your selected position as your destination and your selected position as your destination and
calculate the route up that point. calculate the route up that point.
= For details of other operations on the = For details of other operations on the
“Map Confirmation Screen”, refer to What “Map Confirmation Screen”, refer to What
you can do with the you can do with the
“Map Confirmation Screen” on page 35. “Map Confirmation Screen” on page 35.
32 Engb
Chapter
Engb 33
Chapter
2 Touch the entry you want. 4 Touch one of the options at the bottom
of the “Map Confirmation Screen” to select
the next operation.
34 Engb
Chapter
Save as...
Places a map pin, and saves the position.
= For more details of the operation, refer to
Save as... on the next page.
Route...
Sets the destination, waypoints, and starting
point positions.
= For more details of the operation, refer to Go Here Now
Route... on this page. Calculates the new route by setting the cursor
position as the new destination.
Info = For more details of the operation, refer to
Shows detailed information about the location Setting the location as a new destination on
of the cursor position. the next page.
= For more details of the operation, refer to
Viewing information about a specified loca- Add Via
tion on page 37. Recalculates the route by adding the cursor
position as a waypoint.
Call = For more details of the operation, refer to
Enables you to call the POI that has a tele- Setting the location as a waypoint on the
phone number. (Pairing with mobile phone next page.
featuring Bluetooth wireless technology is re-
quired.) Continue
= For more details of the operation, refer to Recalculates the route by setting the cursor
Dialling a phone number of the POI on page position as the new destination. The previous
54. destination becomes a waypoint.
Engb 35
Chapter
36 Engb
Chapter
start point
When there is no route, only the starting point
can be set. Otherwise, the new route from the
starting point to the current destination will be
recalculated.
Engb 37
Chapter
1 Search for a location or position the 4 Touch the desired category to which
cursor on the desired area by scrolling the the location is to be assigned.
map and displaying the
“Map Confirmation Screen”.
1 Search for a location or position the The registration is now complete and the item
cursor on the desired area by scrolling the is available as a customised POI.
map and displaying the p You can edit the stored POI later in “POI
“Map Confirmation Screen”. Settings”.
= For more details of the operation, refer to
2 Touch [Save as...] on the Editing your customised POI on page 115.
“Map Confirmation Screen”.
38 Engb
Chapter
Deleting an entry in
“Favourites”
All entries in “Favourites” can be deleted at
once.
Engb 39
Chapter
1 2 3
Available options;
1 Uni-directional type
40 Engb
Chapter
conditions
The “Route Information” screen provides you
with various detailed information about the
current route.
This is an example showing a route with two 5
waypoints.
p This function is available only when the
Engb 41
Chapter
3 Touch [Dest.] to switch to the first way- Checking the entire route
point screen. overview on the map
You can check the entire outline of the current
route.
42 Engb
Chapter
Alternative options:
! Detailed Instructions
All turning points, passed streets and other
information is shown.
! Instructions
All turning points (where voice guidance is
given) are shown.
! Road List
Displays the turning points in the most sim-
Engb 43
Chapter
4 Touch [Done].
Sorting waypoints The route is recalculated and the map of the
current position appears.
You can sort waypoints and recalculate the
route.
44 Engb
Chapter
2 Touch [Yes].
Engb 45
Chapter
You can view current traffic conditions and in- 2 Street or location and direction
formation. When the navigation system re- 3 Distance to the location and event
ceives updated traffic information, it will Touching the desired item allows you to check
overlay the traffic information on your map its position on the map.
and also display detailed text information
when available.
In the default setting, the navigation system How to read traffic
takes into account traffic information and tries
to avoid traffic jams and suggest better routes. information on the map
Also, when you are travelling along a route The traffic event information displayed on the
and the system finds another better route for map is as follows.
avoiding the traffic jam, the current route will p Further zooming out hides the lines and
be recalculated automatically. icons of traffic information.
The term “traffic jam” in this section indicates Traffic event icon
the following types of traffic conditions:
— Stop-and-go traffic
— Stopped traffic
— Closed/blocked roads
2 Touch [Settings].
The “TMC Control Centre” screen appears.
1 Event-related icon
46 Engb
Chapter
Available options;
! “Exclude selected station”
Engb 47
Chapter
Preparing communication
devices Registering your mobile
This navigation system has a built-in function
phone
to use mobile phones featuring Bluetooth You need to register your mobile phone featur-
wireless technology. ing Bluetooth wireless technology when you
While your mobile phone featuring Bluetooth connect it for the first time. A total of three
wireless technology is connected, the Blue- phones can be registered. Three registration
tooth connection status indicator lights. methods are available:
= For details, refer to Notes for hands-free ! Searching for nearby phones
phoning on page 58. ! Searching for a specified phone
p When the navigation system is turned off, ! Pairing from your mobile phone
the Bluetooth connection is also discon- p The default device name displayed on the
nected. When the system restarts, the sys- mobile phone is “Pioneer Navi”. The PIN
tem automatically attempts to reconnect code is “1111”.
the previously-connected mobile phone.
Even when the connection is severed for
some reason, the system automatically re-
connects the specified mobile phone (ex-
cept when the connection is severed due to
mobile phone operation).
48 Engb
Chapter
Searching for nearby phones A message prompting you to enter a PIN code
The system searches for available mobile appears.
phones near the navigation system, displays 7 Enter the PIN code “1111” using the
them in a list, and registers them for connec- mobile phone.
tion.
3 Touch [Connection].
Engb 49
Chapter
5 Touch the model name of the mobile 1 Activate the Bluetooth wireless tech-
phone to be connected. nology on your mobile phone.
The system searches for mobile phones featur- For some mobile phones, no specific action is
ing Bluetooth technology that are waiting for necessary to activate Bluetooth wireless tech-
the connection and displays them in the list if nology. For details, refer to the instruction
the device has found. manual of your mobile phone.
3 Touch [Connection].
50 Engb
Chapter
2 Touch [Connection].
Connection starts.
Engb 51
Chapter
52 Engb
Chapter
Making a phone call using the 1 Touch [Missed Calls] on the “Phone
dialled number history Menu”.
The dialled number history saves 30 calls per = For details, refer to Displaying the Phone
registered mobile phone. If the entries exceed Menu on page 48.
30, the oldest one will be deleted.
Engb 53
Chapter
2 If you touch an entry on the list, dial- Touching [Others] displays the page including
ling starts. entries that are not assigned to any of the
p If you touch [Detail], you can check the de- other tabs.
tails of the party before making a phone
call. 4 Touch the desired entry on the list to
p To cancel the call after the system starts make a call.
dialling, touch .
5 Touch to end the call.
3 Touch to end the call.
Dialling a phone number of the POI
Calling a number in the You can make a call to the POI that has a tele-
“Contacts” screen phone number.
After finding the entry you want to call in the 1 To display the
“Contacts” screen, you can select the number “Map Confirmation Screen”, search for a
and make the call. locations or moves the cursor and touch
.
1 Press the MENU button to display the
“Top Menu”. 2 Touch [Info] and select the POI that has
a telephone number.
2 Touch [Contacts].
The “Contacts” screen appears. 3 Touch [Call] to make a call.
3 Switch the page of the list to display
the desired entry.
If you touch an alphabet tab, you can jump to
the first page of the contacts whose names
start with that letter.
54 Engb
Chapter
p If you have not registered your home num- ceed 400, the extra entries will not be
ber, a message appears. Touch [Yes] to transferred. If more than one number is re-
start registration. gistered for one person, such as work place
= For more details about “Set Home”, and home, each number is counted sepa-
refer to Setting your home position on rately.
page 117. p Each entry can hold up to 3 phone num-
bers.
p Depending on the mobile phone that is
Announcing incoming connected to this navigation system via
Bluetooth technology, this navigation sys-
short mails tem may not be able to display the phone
While the mobile phone and the navigation book correctly. (Some characters may be
system are connected, the following notice is garbled.)
displayed when you get a new SMS message. p If the phone book in the mobile phone con-
“New mail from: (sender’s name)” is dis- tains image data, the phone book may not
Engb 55
Chapter
p You can send the phone book entries re- You can clear the missed call history list.
peatedly before touching [OK]. If your mo- p Touching [Clear] displays the confirmation
bile phone supports one-by-one transfer message for clearing the memory.
only, send all the entries that you want to p Touching [Clear All] clears all the data that
transfer before touching [OK]. correspond to the connected mobile phone.
p If your phone has a capability for automatic
transfer of phone book, this screen is 3 Touch [OK].
skipped and transfer will start. Data on the selected item is cleared from this
p The transferred data can not be edited on navigation system’s memory.
the navigation system. p If you do not want to clear memory that you
have selected, touch [Cancel].
5 When the completion message ap-
pears, check the message and touch [OK].
Transfer ends. Setting the phone
Setting the phone volume
Clearing memory The volume level for hands-free phoning can
be adjusted.
You can clear the memory of each item that
corresponds to the connected mobile phone: 1 Touch [Phone Volume] on the “Phone
phone book, dialled/received/missed call his- Menu”.
tory list and preset dials. = For details, refer to Displaying the Phone
Menu on page 48.
1 Touch [Phone Settings] on the “Phone
Menu”. 2 Adjust volume to touch the sliders of
= For details, refer to Displaying the Phone [Phone Ringtone] and [Phone Voice].
Menu on page 48.
[Phone Ringtone]:
This setting controls the incoming ring tone
volume.
On this screen, you can select the following
[Phone Voice]:
items:
This setting controls the incoming voice vo-
Contacts:
lume.
You can clear the registered phone book.
p Phone volume varies depending on the in-
Received Calls List:
coming caller’s phone, volume setting and
You can clear the received call history list.
other conditions.
Dialed Calls List:
You can clear the dialled call history list.
Missed Calls List:
56 Engb
Chapter
= For details concerning operations, refer [Off]: No automatic response. Respond manu-
to Answering an incoming call on page ally
52. [Immediately]: Answers immediately
[After 3 seconds]: Answers after three sec-
onds
Stopping Bluetooth wave [After 6 seconds]: Answers after six seconds
transmission [After 10 seconds]: Answers after ten sec-
You can stop transmission of electric waves by onds
turning off the Bluetooth function. If you do
not use the Bluetooth wireless technology, we
recommend selecting [Off]. Setting the automatic rejection
function
1 Touch [Phone Settings] on the “Phone If this function is on, the navigation system
Menu”. automatically rejects all incoming calls.
= For details, refer to Displaying the Phone
1 Touch [Phone Settings] on the “Phone
Engb 57
Chapter
58 Engb
Chapter
Engb 59
Chapter
60 Engb
Chapter
You can play a normal music CD using the Using the touch panel keys
built-in drive of the navigation system. This
Touch panel keys
section describes how.
1 2
1 Insert the disc you want to play into
disc-loading slot.
Playback starts from the first track of the CD.
3
2 Touch [DISC] on the “AV Source” menu
4
to display the “CD” screen.
5
= For details concerning operations, refer to
6
Screen switching overview on page 16.
7
3 Use the touch panel keys on the screen
to control the disc. 1 Recall equaliser curves
= For details, refer to Recalling equaliser
curves on page 123.
2 Display the “Function” menu
Reading the screen
Engb 61
Chapter
Selecting a track from the list Each touch of [Repeat] changes the setting
as follows:
The list lets you see the list of track titles, file ! Disc — Repeats the current disc
names or folder names on a disc and select ! Track — Repeats just the current track
one of them to play. p If you perform track search or fast for-
1 Touch [List]. ward/rewind, repeat play is automati-
cally cancelled.
2 Touch the track you want to play. 2 Play tracks in a random order
Touching [Random] switches between [On]
and [Off].
3 Scan tracks of a CD
Touching [Scan] switches between [On]
and [Off]. Scan play lets you hear the first
10 seconds of each track on the CD. When
you find the track you want, touch [Scan] to
turn scan play off.
p After scanning is finished, normal play-
back of the tracks will begin again.
The track currently playing is highlighted.
Touching or switches the selection to the
next or previous page in the list.
p The “–” mark is displayed if there is no cor-
responding information.
2 Touch [Func].
1 2 3
1 Repeating play
62 Engb
Chapter
You can play a disc that contains compressed and repeat range: Displays the current
audio files using the built-in drive of the navi- repeat range
gation system. This section describes these 5 File type indicator
operations. Shows the type of audio file currently playing.
p In the following description, the MP3, 6 Play time indicator
WMA, AAC, WAV files are collectively re- Shows the elapsed playing time within the
ferred to as “Compressed audio file”. current track.
p AVIC-F910BT and AVIC-F9110BT cannot 7 Folder name indicator
play WAV files. Shows the folder name currently playing.
8 Song number indicator
1 Insert the disc you want to play into Shows the number of the song playing in the
disc-loading slot. selected list.
Playback starts from the first file of the ROM. 9 Song title indicator
Shows the title of the current song.
2 Touch [DISC] on the “AV Source” menu
a Artist name indicator
to display the “ROM” screen.
Shows the artist name for the current song.
= For details concerning operations, refer to
b Album title indicator
Screen switching overview on page 16.
Shows the title of the album for the current
3 Use this ROM screen to play the disc. song.
4
7
5
8
6
9 7
a 8
b
1 Switch the media file type played
When playing a disc containing a mixture of
1 Source icon various media file types, you can switch be-
Shows which source has been selected. tween media files types to play.
2 Folder number indicator Touch [Media] repeatedly to switch between
Shows the folder number currently playing. the following media file types:
3 Track indicator CD (audio data (CD-DA)) — ROM (com-
Shows the track number currently playing. pressed audio file) — DivX (DivX video files)
4 Scan/Random/Repeat indicator p This touch panel key appears only when
The marks shown below indicate the current playing a disc containing a mixture of
playback status. various media file types.
2 Recall equaliser curves
: Scan
: Random
Engb 63
Chapter
= For details, refer to Recalling equaliser Selecting a track from the list
curves on page 123. The list lets you see the list of track titles or
3 Display the “Function” menu folder names on a disc. Touch a folder on the
= For details, refer to Using the list to view its contents. You can play a track
“Function” menu on the next page. on the list by touching it.
4 Select the previous or next folder
p Touching these keys enables you to se- 1 Touch [List].
lect the previous or next folder and play-
back the first track on the folder. You 2 Touch the folder that you want to view.
cannot select a folder that does not
have a compressed audio file.
5 Skip the track forward or backward
Touching [p] skips to the start of the next
track. Touching [o] once skips to the start
of the current track. Touching it again will skip
to the previous track.
Fast reverse or forward
Touch and hold [o] or [p] to fast rewind
or fast forward.
p Fast rewind stops when it reaches the The track currently playing is highlighted.
beginning of the first file on the repeat Touching or switches the selection to the
range. next or previous page in the list.
p In the case of compressed audio files, Touching displays the content of the upper
there is no sound on fast rewind or for- folder (parent folder). If the uppermost folder
ward. is listed, cannot be used.
p Moving MULTI-CONTROL left or right p If the selected folder does not contain any
enables you to perform the equivalent playable track, the track list is not dis-
operations. played.
6 Playback and Pause
3 Touch the track you want to play.
Touching [f] switches between “playback”
p To cancel the list screen, touch [Detail].
and “pause”.
7 Shuffle All
All of the songs in the disc can be played at Browsing embedded text
random by touching only one key. information
p If the disc contains a mixture of various
Text information recorded in a compressed
media file types, all tracks within the
audio file disc can be displayed.
current part (“CD” or “ROM”) are played
randomly. % Touch .
p [Shuffle All] is not available for AVIC- The next piece of information is displayed.
F710BT. ! Album Title : (album title)*
p To cancel random play, switch [Ran- ! Track Title : (track title)*
dom] to [Off] on the “Function” menu. ! Folder Title : (folder title)
8 Display the map screen ! File Name : (file name)
! Artist Name : (artist name)*
If no information has been recorded for the
item, none can be displayed.
64 Engb
Chapter
p For WAV files, only the information marked 2 Play tracks in a random order
with (*) can be displayed. Touching [Random] switches between [On]
p If you operate no functions for about 30 sec- and [Off]. When using ROM, the tracks in
onds, the display automatically returns to the current repeat play range are randomly
the ordinary display. played.
p If you turn [Random] to [On] when the
repeat play range is set to [Track], the re-
Using the “Function” menu peat play range changes to [Folder]
automatically.
1 Touch [DISC] on the “AV Source” menu 3 Scan folders and tracks
to display the “ROM” screen. Scan play lets you hear the first 10 seconds
= For details concerning operations, refer to of each track. Scan play is performed in the
Screen switching overview on page 16. current repeat play range.
Touching [Scan] switches between [On]
2 Touch [Func].
and [Off]. When you find the track you
want, touch [Scan] to turn scan play off.
p After completion of track or folder scan-
ning, normal playback of the tracks will
begin again.
Engb 65
Chapter
11 Playing a DVD-Video
You can play a DVD-Video using the built-in Using the touch panel keys
drive of the navigation system. This section de-
Playback screen (page1)
scribes operations for playing a DVD-Video.
p AVIC-F710BT cannot play DVDs.
1 Source icon
Shows which source has been selected. c
2 Audio track indicator d
Shows the audio track number and audio lan- e
guage currently selected. 6
3 Title number indicator 7
Shows the title number currently playing.
4 Audio channel indicator f 9g b
Shows the current audio channel type, such Playback screen (page3)
as “Mch” (Multi-channel).
1 2
5 Chapter number indicator
Shows the chapter currently playing.
6 Subtitle language indicator h
Shows the subtitle language currently se- i
j
lected.
7 Digital sound format indicator
Shows which digital sound format (surround k
6
sound format) has been selected.
7
8 Play time indicator
Shows the elapsed playing time within the 8 9 b
current title.
9 Viewing angle indicator p With some discs, the icon 9 may be dis-
Shows what viewing angle has been selected. played, meaning that the operation is not
a Subtitle number indicator valid.
Shows the subtitle number currently 1 Recall equaliser curves
selected. = For details, refer to Recalling equaliser
curves on page 123.
2 Display the “Function” menu
66 Engb
Chapter
Playing a DVD-Video 11
= For details, refer to Using the Touch [m] or [n] to perform fast reverse or
“Function” menu on page 69. forward.
3 Display the DVD menu If you touch and hold [m] or [n] for five
You can display the menu by touching [Menu] seconds, fast reverse/fast forward continues
or [TOP M.] while a disc is playing. Touching even if you release either of these keys. To re-
either of these keys again lets you start play- sume playback at a desired point, touch
back from the location selected from the [f], [m] or [n].
menu. For details, refer to the instructions pro- f Searching for a desired scene and starting
vided with the disc. playback from a specified time
4 Skip forward or backward p For details, refer to Searching for a speci-
Touching [p] skips to the start of the next fic scene and starting playback from a
chapter. Touching [o] once skips to the specified time on the next page.
start of the current chapter. Touching it again g Perform an operation (such as resuming)
will skip to the previous chapter. that is stored on the disc
p Moving MULTI-CONTROL left or right When using a DVD that has a point recorded
enables you to perform the equivalent that indicates where to return to, the DVD re-
operations. turns to the specified point and begins play-
5 Playback and Pause back from that point.
Touching [f] switches between “playback” h Change the subtitle (Multi-subtitle)
and “pause”. Each touch of [S.Title] switches between the
6 Switch the display subtitle languages.
Playing a DVD-Video
Touching [Disp] changes the indication on the i Change the viewing angle (Multi-angle)
information plate as follows: Each touch of [Angle] switches between view-
Disc information display — Repeat range and ing angles.
L/R select display p During playback of a scene shot from
7 Display the map screen multiple angles, the angle icon is
8 Display the DVD menu keypad displayed. Turn the angle icon display
= For details, refer to Using DVD menu by on or off using the “DVD Setup” menu.
touch panel keys on page 69. = For details, refer to Setting the angle icon
9 Switch next page of touch panel keys display on page 78.
a Stop playback j Change audio language and audio sys-
b Hide the touch panel keys tems (Multi-audio)
Touching [Hide] hides the touch panel keys. Each touch of [Audio] switches between
Touch anywhere on the LCD screen to display audio languages and audio systems.
the touch panel keys again. p DTS audio cannot be output, so select
c Skip the title forward or backward an audio setting other than DTS.
Touching [d] skips to the start of the next title. p Display indications such as MPEG-A
Touching [c] skips to the start of the previous and Mch indicate the audio system re-
title. corded on the DVD. Depending on the
d Frame-by-frame playback (or slow-motion setting, playback may not use the same
playback) audio system as that indicated.
= For details, refer to Frame-by-frame play- k Entering the numerical commands
back on page 69. = For details, refer to Direct number search
= For details, refer to Slow motion playback on the next page.
on page 69.
e Fast reverse or forward
Engb 67
Chapter
11 Playing a DVD-Video
Resuming playback (Bookmark) 2 Touch the keys to input the target num-
The Bookmark function lets you resume play- ber or time and then touch [Enter].
back from a selected scene the next time the
disc is loaded.
Touching [B.Mark]:
You can bookmark one point for each of up to
five discs. If you try to memorize another point
for the same disc, the oldest bookmark will be
overwritten by the newest one.
p To clear the bookmark on a disc, touch and
hold [B.Mark] during playback.
Press and hold down the EJECT button: For titles, chapters
You can also bookmark a point for one disc by ! To select 3, touch [3] and [Enter] in order.
pressing and holding down the EJECT button. ! To select 10, touch [1] and [0] and [Enter] in
The next time you load the same disc, play- order.
back will resume from the bookmarked point. For time (time search)
When you newly bookmark a point with this ! To select 5 minutes 03 seconds, touch [5],
method, any previously bookmarked point(s) [0], [3] and [Enter] in order.
will be overwritten. ! To select 71 minutes 00 seconds, touch [7],
p For playback, the point bookmarked [1], [0], [0] and [Enter] in order.
with this method is given priority over p To cancel the input numbers, touch [Clear].
the point bookmarked by using
[B.Mark].
Direct number search
You can use this function when you need to
Searching for a specific scene enter a numerical command during DVD play-
and starting playback from a back.
specified time 1 Touch [0-9].
You can search for the scene you want by spe-
cifying a title or a chapter, and the time. 2 Touch [0] to [9] to input the desired
p Chapter search and time search are not number.
possible when disc playback has been 3 While the input number is displayed,
stopped. touch [Enter].
1 Touch [Search] and then touch [Title]
(title), [Chapter] (chapter), [Time] (time).
Operating the DVD menu
You can operate the DVD menu by touching
the menu item on the screen directly.
p This function may not work properly with
some DVD disc content. In that case, use
touch panel keys to operate the DVD menu.
1 Touch the screen to display the touch
panel keys.
2 Touch [TOP M.] or [Menu] to display
touch panel keys to operate the DVD
menu.
68 Engb
Chapter
Playing a DVD-Video 11
3 Touch the desired menu item. p To return to normal playback, touch [f].
2 Touch [q] or [r] to adjust playback
Using DVD menu by touch panel keys speed during slow motion playback.
If items on the DVD menu appear at the bot- Each time you touch [q] or [r] it changes
tom of the screen, the touch panel keys may the speed in four steps in the following order:
overlay them. If so, select an item using those 1/16 f 1/8 f 1/4 f 1/2
touch panel keys. p There is no sound during slow motion play-
back.
1 Touch [a], [b], [c] or [d] to select the p With some discs, images may be unclear
desired menu item. during slow motion playback.
p Reversed slow motion playback is not possi-
ble.
p If the touch panel keys for DVD menu selec- 2 Touch the screen to display the touch
tion disappear, touching anywhere on the panel keys.
Playing a DVD-Video
screen, then touching displays them 3 Touch [Func].
again.
2 Touch [Enter].
Playback starts from the selected menu item.
The way to display the menu differs depending
on the disc.
Frame-by-frame playback
This lets you move ahead one frame at a time
during playback.
1 2 3
% Touch [r] during playback.
Each time you touch [r], you move ahead 1 Repeating play
one frame. Each touch of [Repeat] changes the setting
To return to normal playback, touch [f]. as follows:
p With some discs, images may be unclear ! Title — Repeats just the current title
during frame-by-frame playback. ! Chapter — Repeats just the current
chapter
! Disc — Plays throughout the current
Slow motion playback disc
This lets you slow down playback speed. p If you perform chapter (title) search, fast
forward/rewind or slow motion playback,
1 Touch and hold [r] until is dis- the repeat play range changes to [Disc].
played during playback. 2 Selecting audio output
The icon is displayed, and forward slow
motion playback begins.
Engb 69
Chapter
11 Playing a DVD-Video
70 Engb
Chapter
You can play a DVD-VR (DVD Video Recording Using the touch panel keys
Format) disc using the built-in drive of the na-
vigation system. This section describes opera- Playback screen (page1)
tions for DVD-VR discs. 1 2
p AVIC-F710BT cannot play DVD-VR discs.
3
Reading the screen 4
5
12 3 4 5 6 7 8
6
7
9 8
9abc
d
1 Source icon
Shows which source has been selected. e
2 Audio track indicator f
g
Shows the audio track number currently se-
h
lected. 7
3 Title number indicator
Engb 71
Chapter
p Moving MULTI-CONTROL left or right i Searching for a desired scene and starting
enables you to perform the equivalent playback from a specified time
operations. = For details, refer to Searching for a speci-
6 Playback and Pause fic scene and starting playback from a
Touching [f] switches between “playback” specified time on this page.
and “pause”.
7 Switch the display
Touching [Disp] changes the information as Searching for a specific scene
follows: and starting playback from a
Disc information display — Repeat range dis- specified time
play
8 Display the map screen You can search for the scene you want by spe-
9 Display the title list cifying a title or a chapter, and the time.
Displays the title list recorded on the disc. p Chapter search and time search are not
a Switch next page of touch panel keys possible when disc playback has been
b Stop playback stopped.
c Hide the touch panel keys 1 Touch [Search] and then touch [Title]
Touching [Hide] hides the touch panel keys. (title), [Chapter] (chapter), [Time] (time).
Touch anywhere on the LCD screen to display
the touch panel keys again.
d Change audio tracks (Multi-audio)
Each touch of [Audio] switches between
audio tracks.
p Display indications such as MPEG-A
and Mch indicate the audio system re-
corded on the DVD. Depending on the
setting, playback may not use the same
audio system as that indicated.
e Skip the title forward or backward
Touching [d] skips to the start of the next title. 2 Touch the keys to input the target num-
Touching [c] skips to the start of the previous ber or time and then touch [Enter].
title.
f Change the subtitle (Multi-subtitle)
Each touch of [S.Title] switches between the
subtitle languages.
g Frame-by-frame playback (or slow-motion
playback)
= For details, refer to Frame-by-frame play-
back on the next page.
= For details, refer to Slow motion playback
on the next page.
h Fast reverse or forward
Touch [m] or [n] to perform fast reverse or For titles, chapters
forward. ! To select 3, touch [3] and [Enter] in order.
If you touch and hold [m] or [n] for five ! To select 10, touch [1] and [0] and [Enter] in
seconds, fast reverse/fast forward continues order.
even if you release either of these keys. To re- For time (time search)
sume playback at a desired point, touch ! To select 5 minutes 03 seconds, touch [5],
[f], [m] or [n]. [0], [3] and [Enter] in order.
72 Engb
Chapter
! To select 71 minutes 00 seconds, touch [7], 2 Touch the title to play from the list.
[1], [0], [0] and [Enter] in order.
p To cancel the input numbers, touch [Clear].
Engb 73
Chapter
1 2 3
1 Repeating play
Each touch of [Repeat] changes the setting
as follows:
! Title — Repeats just the current title
! Chapter — Repeats just the current
chapter
! Disc — Plays throughout the current
disc
p If you perform chapter (title) search, fast
forward/rewind or slow motion playback,
the repeat play range changes to [Disc].
2 Selecting audio output
When playing DVDs recorded with LPCM
audio, you can switch the audio output.
Touch [L/R Select] repeatedly until the de-
sired audio output appears in the display.
! L+R — Left and right
! L — Left
! R — Right
! Mix — Mixing left and right
p This function is not available when disc
playback has been stopped.
3 DVD setup adjustments
= For details, refer to Displaying DVD
Setup menu on page 78.
74 Engb
Chapter
You can play a DivX disc using the built-in Using the touch panel keys
89ab
1 Source icon
Shows which source has been selected. c
2 Audio track indicator 3
Shows the audio track number currently se- d
e
lected.
f
3 Folder number indicator
6
Shows the folder number currently playing.
7
4 Audio channel indicator
Shows the current audio channel type, such g 9 b
as “Mch” (Multi-channel).
5 File number indicator p With some discs, the icon 9 may be dis-
Shows the file number currently playing. played, meaning that the operation is not
6 Subtitle number indicator valid.
Shows the subtitle number currently selected. 1 Recall equaliser curves
7 Digital sound format indicator = For details, refer to Recalling equaliser
Shows the digital sound format (surround curves on page 123.
sound format) currently selected. 2 Display the “Function” menu
8 Play time indicator = For details, refer to Using the
Shows the elapsed playing time of the current “Function” menu on page 77.
file. 3 Select the previous or next folder
9 Repeat range indicator Touch [c] or [d] to select the desired folder.
Shows which repeat range has been 4 Skip forward or backward
selected. Touching [p] skips to the start of the next
file. Touching [o] once skips to the start of
the current file. Touching again will skip to the
previous file.
p Moving MULTI-CONTROL left or right
enables you to perform the equivalent
operations.
5 Playback and Pause
Touching [f] switches between “playback”
and “pause”.
Engb 75
Chapter
76 Engb
Chapter
2 Touch the keys to input the target num- Each touch of [Repeat] changes the setting
1 2
1 Repeating play
Engb 77
Chapter
78 Engb
Chapter
Setting the aspect ratio Setting the code number and level
There are two kinds of displays. A wide screen When you first use this function, register your
display has a width-to-height ratio (TV aspect) code number. If you do not register a code
Engb 79
Chapter
Displaying your DivX VOD p If no DivX external subtitle files exist, the
original DivX subtitles are displayed even
registration code when [Custom] is selected.
In order to play DivX VOD (video on demand)
1 Touch [DVD Setup] on the “Function”
content on this navigation system, you first
menu.
need to register the unit with your DivX VOD
= For details, refer to Displaying DVD Setup
content provider. You do this by generating a
menu on page 78.
DivX VOD registration code, which you submit
to your provider. 2 Touch [Subtitle File].
Touching [Subtitle File] switches this setting
1 Touch [DVD Setup] on the “Function”
between [Original] and [Custom].
menu.
p Up to 42 characters can be displayed on
= For details, refer to Displaying DVD Setup
one line. If more than 42 characters are set,
menu on page 78.
the line breaks and the characters are dis-
2 Touch [DivX VOD]. played on the next line.
Your 8-digit registration code is displayed. p Up to 126 characters can be displayed on
p Make a note of the code as you will need it one screen. If more than 126 characters are
when you register with a DivX VOD set, the excess characters will not be dis-
provider. played.
p The DivX subtitles will be displayed even
when the subtitle file setting is on if no cor-
Setting “Auto Play” responding subtitle files exist.
p Up to three lines can be displayed at
When a DVD disc with DVD menu is inserted, once.
this unit will cancel the DVD menu automati-
cally and start playback from the first chapter
of the first title.
p This function is available for DVD-Video.
p Some DVDs may not operate properly. If
this function is not fully operable, turn this
function off and start playback.
1 Touch [DVD Setup] on the “Function”
menu.
= For details, refer to Displaying DVD Setup
menu on page 78.
2 Touch [Auto Play].
Touching [Auto Play] switches this setting be-
tween [On] and [Off].
p When [Auto Play] is [On], repeat play can-
not be used.
80 Engb
Chapter
Engb 81
Chapter
You can play the compressed audio files p Playback is performed in order of folder
stored in the external storage device (USB, number. Folders are skipped if they con-
SD). tains no playable files. (If there are no play-
p In the following description, the SD mem- able files in folder 001 (root folder),
ory card and USB memory device are col- playback starts from folder 002.)
lectively referred to as the “external storage
device (USB, SD)”. If it indicates the USB
memory device only, it is referred to as the Reading the screen
“USB storage device”.
p When “SD” or “USB” is selected as the AV 12 3 45
source, the AV sounds, the navigation gui-
dance and beep sounds are mixed and the 6
volume can be adjusted simultaneously.
7
Important Notice regarding Volume of
8
Navigation Voice Guidance when
9
Playing Audio Files from USB or SD
a
If music files stored on an external storage de-
vice (USB, SD) are played when the system
guides the route (i.e., a destination has been b
selected and the system is routing you to a
p This unit may not achieve optimum perfor-
destination), the volume of the navigation gui-
mance with some external storage devices.
dance voice will be the same as the volume of
p You can playback the files on a USB sto-
the music files being played, even if a different
rage device compliant with Mass Storage
volume level has been selected on “Master”
Class. For details about the USB Class,
or “Voice” or “Dynamic Volume” in the
refer to the manual supplied with USB sto-
“Sound settings” menu.
rage device.
1 Source icon
Shows which source has been selected.
Starting procedure 2 Folder number indicator
% Insert the SD memory card into the SD 3 Track number indicator
card slot or plug the USB storage device 4 Play time indicator
into the USB connector. Shows the elapsed playing time within the
The source changes and then playback will current track.
start if there is a playable file on the external 5 File type indicator
storage device. Shows the type of audio file currently playing.
= For details, refer to Plugging in a USB sto- 6 Current folder name indicator
rage device on page 13. Shows the folder name currently playing.
= For details, refer to Inserting and ejecting an 7 Current file number and total number of
SD memory card on page 12. files
p If the external storage device is already set, Shows the file number currently played and
touch [USB] or [SD] on the “AV Source” the total number of playable audio files.
menu. 8 Track title indicator*
= For details concerning operations, refer to Shows the title of the track currently playing
Screen switching overview on page 16. (when available).
9 Artist name indicator*
82 Engb
Chapter
Shows the artist name currently playing Using the touch panel keys
(when available).
a Album title indicator* (Music)
Shows the title of the album for the current 1 2
track (when available).
: Scan play 5
: Random play 6
: Repeat play
7
Indicator Meaning
1 Recall equaliser curves
All audio files in the current = For details, refer to Recalling equaliser
external storage device curves on page 123.
Media Repeat (USB, SD) are played repeat-
edly. This is the default con- 2 Display the “Function” menu
dition. = For details, refer to Using the
“Function” menu on the next page.
The current folder is played
Folder Repeat 3 Switch the operation screen
repeatedly.
Touching this key switches between the
The current file is played re-
Track Repeat
peatedly.
screen to operate music files and the screen
to operate video files. This touch panel key is
All audio files in the current available only when there are both audio and
external storage device
Media Random video files in the external storage device (USB,
(USB, SD) are played in ran-
dom order. SD).
4 Select the previous or next folder
All audio files in the current
Folder Random folder are played in random Touching [c] or [d] play the first playable file
order. on the previous or next folder. The folders that
there is no playable files are skipped.
The beginning of each audio
Media Scan file is played for about 10 5 Skip forward or backward
seconds. Touching [p] skips to the start of the next
The beginning of each track
file. Touching [o] once skips to the start of
Folder Scan in the current folder is the current file. Touching again will skip to the
played for about 10 seconds. previous file.
Fast reverse or forward
= For more information, refer to Using the Touch and hold [o] or [p] to fast rewind
“Function” menu on the next page. or fast forward.
p The information marked with an asterisk (*) p There is no sound on fast reverse or for-
is displayed only when the information has ward.
been encoded on the compressed audio p Moving MULTI-CONTROL left or right
files. If specific information has not been enables you to perform the equivalent
encoded on the files, “—” is displayed in- operations.
stead. 6 Playback and Pause
Touching [f] switches between playback
and pause.
7 Display the map screen
Engb 83
Chapter
Selecting a track from the list p If the information has not been recorded on
files, nothing may be displayed.
The list lets you see the list of track titles or
p For WAV files, only the information marked
folder names on an external storage device
with (*) can be displayed.
(USB, SD). Touch a folder on the list to view its
p If the characters recorded on the com-
contents. Touch a track on the list to play that
pressed audio file are not compatible with
track.
this navigation system, those characters
1 Touch [List]. may turn into garbled characters.
2 Touch [Func].
84 Engb
Chapter
Engb 85
Chapter
You can play the video files stored in the exter- able files in folder 001 (root folder),
nal storage device (USB, SD). playback starts from folder 002.)
p In the following description, the SD mem-
ory card and USB memory device are col-
lectively referred to as the “external storage Reading the screen
device (USB, SD)”. If it indicates the USB
memory device only, it is referred to as the 12 3 45
“USB storage device”.
p When “SD” or “USB” is selected as the AV 6
source, the AV sounds, the navigation gui-
dance and beep sounds are mixed and the
volume can be adjusted simultaneously.
86 Engb
Chapter
Using the touch panel keys Touching [f] switches between playback
and pause.
(Video) 7 Display the map screen
1 2 8 Searching for a desired scene and starting
playback from a specified time
= For details, refer to Searching for a speci-
3
fic scene and starting playback from a
Engb 87
Chapter
3 Touch [Func].
p If the touch panel keys are not shown,
touch anywhere on the screen to display
them.
1 Repeating play
Each touch of [Repeat] changes the setting
as follows:
! Media — Repeat all video files in the se-
lected external storage device (USB, SD)
! File — Repeat just the current file
! Folder — Repeat the current folder
p If you skip the file forward or backward
when the repeat play range in “File”, the
88 Engb
Chapter
Starting procedure
Engb 89
Chapter
p If characters recorded on the iPod are not the song using the category tabs to play,
compatible with this navigation system, touching the key displays the previous list.
they may turn into garbled characters. 7 Skip back or forward to another song
Touching [p] skips to the start of the next
song. Touching [o] once skips to the start
Using the touch panel keys of the current song. Touching again will skip
to the previous song. When the track with
(Music) chapters played, chapter can be skipped back
1 2 3 4 and forward.
Fast reverse or forward
Touch and hold [o] or [p] to fast rewind
5
or fast forward.
6 p Moving MULTI-CONTROL left or right
7 enables you to perform the equivalent
operations.
8 8 Playback and Pause
9
Touching [f] switches between playback
and pause.
a 9 Display the map screen
a Shuffle All
1 Album artwork
All songs (except for the track in “Audio-
Touch the key to enlarge the album artwork. If
books” and “Podcasts”) in your iPod can be
you touch again, the artwork returns to its nor-
played randomly.
mal size.
p To cancel the random play, switch
2 Category tabs
[Shuffle] on the “Function” menu to the
Shows the list to narrow down the songs. If
“Off”.
you want to use the list of “Audiobooks”,
“Composers” or “Songs”, touch [Menu] to
display the lists. Browsing for a song
3 Recall equaliser curves Touch an item on list to search for a song and
= For details, refer to Recalling equaliser play it on your iPod.
curves on page 123.
4 Display the “Function” menu
= For details, refer to Using the Narrowing down listed songs
“Function” menu on page 93. 1 Touch your desired category tab to dis-
5 Switch the operation screen play the song or track list.
Touching this key switches between the ! Playlists (playlists)
screen to operate music files and the screen ! Genres (genres)
to operate video files. After you touch the key, ! Artists (artists)
the top category menu appears to let you se- ! Albums (albums)
lect the item for playback. ! Podcasts (podcasts)
p This touch panel key is available only The search screen is displayed.
when there are both audio and video file
in your iPod.
6 Display the top category menu
Touching the key displays the top category be-
fore you use the category tabs. If you select
90 Engb
Chapter
Engb 91
Chapter
3 Touch your desired item on the list to If you select the video from the list to play
narrow down them until the video list ap- after touching Top Menu, touching the key
pears. displays the previous list. (If you touch Top
= For details concerning operations, refer to Menu again but do not select a video, this key
Browsing for a video on this page. is disabled until you select a video with the list
next time.)
4 On the video list, touch the video you 5 Skip back or forward to another song
want to play. Touching [p] skips to the start of the next
video. Touching [o] once skips to the start
5 Touch the screen to display the touch
of the current video. Touching again will skip
panel keys.
to the previous video. When the video with
= For more details of the operation, refer to
chapters played, chapter can be skipped back
Using the touch panel keys (Video) on this
and forward.
page.
Fast reverse or forward
Touch and hold [o] or [p] to fast rewind
or fast forward.
Using the touch panel keys p Moving MULTI-CONTROL left or right
(Video) enables you to perform the equivalent
operations.
1 2
6 Playback and Pause
Touching [f] switches between playback
3 and pause.
7 Display the map screen
4
5 8 Display the top category menu for video
Touching the key displays the top category for
video playback.
6
9 Hide the touch panel keys
7 Touching [Hide] hides the touch panel keys.
8 9
Touch anywhere on the LCD screen to display
the touch panel keys again.
1 Recall equaliser curves
= For details, refer to Recalling equaliser
curves on page 123. Browsing for a video
2 Display the “Function” menu Touching the item on list allows you to search
= For details, refer to Using the for a video and play it in your iPod.
“Function” menu on the next page.
3 Switch the operation screen
Touching this key switches between the
screen to operate music files and the screen
to operate video files. After you touch the key,
the top category menu appears to let you se-
lect the item for playback.
p This touch panel key is available only
when there are both audio and video file
in your iPod.
4 Display the previous selected list
92 Engb
Chapter
Narrowing down a video with the list 3 Touch [c] or [d] to select the character.
p “THE” or “The” and space at the beginning
1 Touch the category you want.
of the artist name will be ignored and the
next character will be taken into account
for searching.
Engb 93
Chapter
94 Engb
Chapter
You can listen to the radio by using the naviga- be received, the frequency will be displayed in-
tion system. This section describes operations stead.
for radio (FM). 8 PTY indicator
Shows the programme type of the current sta-
tion (when available).
The functions related to RDS (Radio Data Sys-
9 LOCAL indicator
tem) are available only in areas with FM sta-
Shows when local seek tuning is on.
tions broadcasting RDS signals. Even if the
a STEREO indicator
navigation system is receiving an RDS station,
Shows that the frequency selected is being
not all the functions related with RDS will be
broadcast in stereo.
available.
b Radio text display area
7 4
8
9 5
a 6
Engb 95
Chapter
p You can cancel seek tuning by touching Storing and recalling broadcast
either [c] or [d] briefly. frequencies
p If you touch and hold [c] or [d], you
With a touch of any of the preset tuning keys
can skip broadcasting frequencies.
([P1] to [P6]), you can easily store up to six
Seek tuning will start as soon as you re-
broadcast frequencies for later recall (also
lease the keys.
with the touch of a key).
p Moving MULTI-CONTROL left or right
enables you to perform the equivalent
operations.
5 Select an FM band
Touch [Band] repeatedly until the desired FM
band is displayed, FM1, FM2 or FM3.
p This function is convenient for preparing
different preset lists for each band.
6 Display the map screen
96 Engb
Chapter
Engb 97
Chapter
98 Engb
Chapter
Engb 99
Chapter
Indicator Meaning
Information interruption is acti-
or
vated, but you will not receive data
TRFC
since there is none.
100 Engb
Chapter
PTY list
General Specific Type of programme
News&INF News News
Affairs Current affairs
Sport Sports
Weather Weather reports/meteorological information
Finance Stock market reports, commerce, trading, etc.
Jazz Jazz
Country Country music
Nat Mus National music
Children Children’s
Phone In Phone In
Touring Travel programmes, not for announcements about traffic problems
Engb 101
Chapter
You can listen to the radio using this naviga- 2 Display the “Function” menu
tion system. This section describes operations = For details, refer to Using the
for radio (AM). “Function” menu on the next page.
3 Select a preset channel
% Touch [AM] on the “AV Source” menu c or d can be used to switch presets.
to display the “AM” screen. 4 Perform manual tuning
= For details concerning operations, refer to To tune manually, touch [c] or [d] briefly. The
Screen switching overview on page 16. frequencies move up or down one step at a
time.
Perform seek tuning
Reading the screen To perform seek tuning, touch and hold [c] or
[d] for about one second and release. The
1 2 3
tuner will scan the frequencies until a broad-
cast strong enough for good reception is
found.
p You can cancel seek tuning by touching
4
5 either [c] or [d] briefly.
p If you touch and hold [c] or [d], you
can skip broadcasting frequencies.
Seek tuning will start as soon as you re-
lease the keys.
p Moving MULTI-CONTROL left or right
1 Source icon enables you to perform the equivalent
Shows which source has been selected. operations.
2 Preset number indicator 5 Display the map screen
Shows what preset item has been selected.
3 Frequency indicator
4 Signal level indicator Switching between the
5 LOCAL indicator detailed information display
Shows when local seek tuning is on. and the preset list display
You can switch the left side of the basic screen
according to your preference.
Using the touch panel keys
1 2
5
% Touch [Preset] (or [Detail]).
1 Recall equaliser curves Each touch of [Preset] (or [Detail]) changes
= For details, refer to Recalling equaliser the detailed information display or preset list
curves on page 123. display.
102 Engb
Chapter
1 2
1 When you find a frequency that you Storing the strongest broadcast
want to store in memory, touch and hold a frequencies
preset tuning key [P1] to [P6] until the pre-
set number (e.g., P.ch 1) stops flashing. “BSM” (best stations memory) lets you auto-
The selected radio station has been stored in matically store the six strongest broadcast fre-
memory. quencies under the preset tuning keys [P1] to
[P6] and, once stored there, you can tune in to
2 The next time you touch the same pre- these frequencies with the touch of a key.
set tuning key [P1] to [P6], the radio station
frequencies are recalled from memory. % Touch [Start] to turn BSM on.
p You can also use [c] and [d] to recall radio BSM begins to flash. While BSM is flashing,
stations assigned to preset tuning keys [P1] the six strongest broadcast frequencies will be
to [P6]. stored under the preset tuning keys [P1] to
[P6] in order of their signal strength. When
this is complete, BSM stops flashing.
p To cancel the storage process, touch
Using the “Function” menu [Stop].
1 Touch [AM] on the “AV Source” menu p Storing broadcast frequencies with BSM
to display the “AM” screen. may replace broadcast frequencies you
= For details concerning operations, refer to have already saved by using [P1] to [P6].
Screen switching overview on page 16.
Tuning in strong signals
Local seek tuning allows you to tune in only
those radio stations with sufficiently strong
signals for good reception.
Engb 103
Chapter
104 Engb
Chapter
Using AV input 20
You can display “video image” output by AV1 Using the touch panel keys
Input or AV2 Input to the screen of the navi-
gation system. For details of the connection % Touch the screen to display the touch
method, refer to “Installation Manual”. panel keys.
1
CAUTION
For safety reasons, video images cannot be
viewed while your vehicle is in motion. To view
video images, you must stop in a safe place and
apply the handbrake.
Using AV1
You can display “video image” output by the 2 3
Using AV input
equipment connected to “AV1 Input”. 1 Recall equaliser curves
= For details, refer to Recalling equaliser
1 Touch [AV1 Input] on the “AV System
curves on page 123.
Settings” menu.
2 Hide the touch panel keys
= For details, refer to Setting video input 1
Touching [Hide] hides the touch panel
(AV1) on page 126.
keys. Touch anywhere on the LCD screen to
2 Touch [AV1] on the “AV Source” menu. display the touch panel keys again.
The image is displayed on the screen. 3 Display the map screen
= For details concerning operations, refer to
Screen switching overview on page 16.
Using AV2
You can display “video image” output by the
equipment connected to “AV2 Input”.
Engb 105
Chapter
21 Customising preferences
The options in the “Navi 4 Use the tool assigned to the desired op-
tion to change the settings.
Settings” menu
1
Basic operations in the “Navi
Settings” menu
Preferences related to the navigation functions
can be set.
A method for changing the volume setting for
the navigation guidance and beep is described
here, along with an operational example.
1 Press the MENU button to display the
“Top Menu”, and then touch [Settings]. 2 3
2 Touch [Navi Settings]. 1 Slider
Change the value by touching the desired
point on the bar or dragging the slider to
the desired point.
2 Detailed setup key
Displays the screen for setting the prefer-
ences in detail.
3 On-off control
Touching [On] or [Off] enables activation or
deactivation of this function.
The “Navi Settings” menu appears. 5 Touch to return to the “Navi Set-
tings” menu.
3 Touch [Sound settings].
106 Engb
Chapter
Customising preferences 21
4 5
Customising preferences
Grey Yes No Synchronises the internal clock of this navi-
gation system with the accurate time trans-
Red No No
mitted from GPS (GMT). Changing this
preference allows you to set the time manu-
2 Shows the current comprehensive accu-
ally.
racy, altitude and speed.
3 Shows each satellite’s signal strength.
4 Shows the connection status or reception CAUTION
Turning “Auto Correction” to “Off” dis-
condition of GPS aerial.
ables the automatic change to the appropri-
Colour Condition ate time zone. Note that the proper route
may not be calculated if the time you set
3D reception (Normal positional
Green
accuracy)
does not match the time zone of the area
that your route passes through.
2D reception (lower positional ac-
Yellow [On]:
curacy)
Corrects the current time by changing the
Red Connected and no reception time zone automatically according to this
Black system’s whereabouts.
No connection
with x [Off]:
Corrects the current time according to the
5 Shows the GPS reception status. A blinking settings on “Time Zone” and “Time”.
green lamp indicates whether positioning is ! “Time Zone”
works normally. If the lamp lights up in an- Enables you to set the time zone manually.
other colour, there is a problem related with Touch the key to show the list and then
GPS reception. In such case, check whether touch the current time zone.
the connection and installation are correct. ! “Time”
Enables you to adjust the time difference by
one hour. Touch a or b to adjust it.
Time Settings
p “Time Zone” and “Time” are activated
Use the “Time Settings” screen to set the only when [Off] is selected.
time manually.
Engb 107
Chapter
21 Customising preferences
3D Settings
The 3D map screen settings can be custo-
mised.
1 Touch [Map Visual] on the “Navi Set-
tings” menu.
The “Map Visual Settings” screen appears.
2 Touch [3D Settings].
The “3D Visual Settings” screen appears. Available options;
! [Map colour]
Enables you to define the map colour for
daytime and nighttime use. Touch this key
to show the next screen.
“Daylight colour profile:”
The daytime map colour can be set. Touch
the key and select the desired profile from
the list.
“Night colour profile:”
The nighttime map colour can be set. Touch
Available options; the key and select the desired profile from
! “Landmarks” the list.
You can select whether or not to draw gra- ! “Night mode”
phical 3D landmarks on the map. Changes the settings for the nighttime
! “Elevated Roads” map.
You can select whether or not to draw ele- [Automatic]:
vated roads, interchanges, and bridges on Switches the map colour defined under
the map. “Map colour” automatically between day-
! “Terrain Detail Level” time and nighttime.
[High], [Medium], [Low]: [Night]:
Draws the terrain (e.g. mountain chains) on Always displays the map in the colour de-
the map with the selected detail level. fined on “Night colour profile:”.
[Off]: [Day]:
Does not draw the terrain on the map. Always displays the map in the colour de-
fined on “Daylight colour profile:”.
! “Elevation on 2D Map”
108 Engb
Chapter
Customising preferences 21
You can select whether or not to draw the 3 Touch the key on the right of “Top
terrain with a realistic landscape on the field:” to display the options.
map, such as a green space, water place,
and undulating surface.
! “Show Street Labels”
Shows or hides street names and city
names.
! “Full Screen Map”
Shows/hides the “Multi-Info window” and
“Second manoeuvre arrow”.
Displayed Info
4 Touch your desired option.
Allows you to select what options you want to
display on each part of the “Multi-Info win-
dow”.
p The estimated time of arrival is an ideal
value that the navigation system computes
Customising preferences
internally as the route is calculated. The es-
timated time of arrival should be read just
as a reference value, and does not guaran-
tee arrival at the time indicated.
A method for changing the value of Top field:
is described here along with an operational ex-
ample.
Smart Zoom
Enables the navigation system to zoom in
automatically when you approach a guidance
point and zoom out after you pass through it.
You can setup the behaviour while “Smart
Zoom” is activated.
p When no route is set, the navigation system
will simply zoom in or out depending on
your speed.
1 Touch [Map Visual] on the “Navi Set-
1 Touch [Map Visual] on the “Navi Set- tings” menu.
tings” menu. The “Map Visual Settings” screen appears.
The “Map Visual Settings” screen appears.
2 Touch [On] or [Off] to activate or deacti-
2 Touch [Displayed Info]. vate “Smart Zoom”.
The “Displayed Info” screen appears. Touching allows you to enter the detailed
setting screen only when [On] has been se-
lected.
Engb 109
Chapter
21 Customising preferences
110 Engb
Chapter
Customising preferences 21
Customising preferences
! “Unpaved Roads” Warnings
[On]: The settings related to warnings can be custo-
Calculates a route which does not avoid un- mised.
paved roads.
[Off]: % Touch [Warnings] on the “Navi Set-
Calculates a route which avoids unpaved tings” menu.
roads as far as possible. The “Warning settings” screen appears.
! “Motorways”
[On]:
Calculates a route which does not avoid
motorways.
[Off]:
Calculates a route which avoids motorways
as far as possible.
! “Ferries”
[On]:
Calculates a route which does not avoid fer-
ries. Available options;
[Off]: ! “Warn When Speeding”
Calculates a route which avoids ferries as Sets whether or not to enable the excessive
far as possible. speed warnings for when you exceed the
! “U-turns” speed limit.
[On]:
Calculates a route which does not avoid U- CAUTION
The speed limit is based on the map data-
turns.
base. The speed limit in the database may
[Off]:
not match the actual speed limit of the cur-
Calculates a route which avoids U-turns as
rent road. This is not a definite value. Be
far as possible.
sure to drive according to the actual speed
p Turning back on a divided highway is
limit.
not considered a U-turn.
Engb 111
Chapter
21 Customising preferences
CAUTION
! In some countries the use of systems
that give drivers advance warning of
safety cameras (which includes speed
cameras and other type of cameras
Available options;
meant for traffic control) is prohibited.
! “Distance Units”
Therefore Pioneer strongly advices you
Controls the unit of distance and speed
to check:
shown.
—your local legislation and to use warn-
! “Coordinate display format”
ing function for safety cameras only if
Controls the format of latitude and longi-
this is allowed.
tude shown.
—when travelling abroad please make
! “Date format”
check in advance that the “speed warn-
Controls the date display format.
ing system” in the countries you are driv-
! “Date delimiter”
ing in is allowed.
Controls the delimiter format used for date
! Pioneer is no liable for any damage re-
display.
sulting from your use of warning func-
! “Time format”
tion for safety cameras on this
Controls the time display format.
navigation system.
! “Audible Warning”
[Simple]: Set Home
This warning is given only if you ex- = For more details of the operation, refer to
ceed the speed limit when approach- Setting your home position on page 117.
ing a camera location.
[When Approaching]:
Warns repeatedly as you approach a Demo Mode
camera location. This is a demonstration function for retail
[Disabled]: stores. After a route is set, touching this key
Deactivates warning operations. starts the simulation of route guidance.
! “Visible Warning”
Establishes whether or not to enable 1 Touch [Demo Mode] on the “Navi Set-
the safety camera icons on the map. tings” menu.
2 The demonstration guidance will
Regional Settings begin.
p If you want to run the simulation at faster
The display format for the distance unit, lati-
speed, touch [Fly over] on the “Route In-
tude and longitude, and other settings related
formation” screen.
to time and date can be customised.
112 Engb
Chapter
Customising preferences 21
= For more details of the operation, refer to Enables the navigation system to automati-
Playing simulated travel at high speed on cally start turning the volume up as the cur-
page 42. rent speed reaches the value set here.
“Maximum speed:”
Enables the navigation system to automati-
Sound settings cally maximise the volume when the cur-
All settings here are effective only for the navi- rent speed reaches the value set here.
gation guidance and beep.
Important Notice regarding Volume of
% Touch [Sound settings] on the “Navi Navigation Voice Guidance when Playing
Settings” menu. Audio Files from USB or SD
The “Sound settings” menu appears. If music files stored on an external storage device
(USB, SD) are played when the system guides the
route (i.e., a destination has been selected and
the system is routing you to a destination), the vo-
lume of the navigation guidance voice will be the
same as the volume of the music files being
played, even if a different volume level has been
Customising preferences
selected on “Master” or “Voice” or “Dynamic Vo-
lume” in the “Sound settings” menu.
Engb 113
Chapter
21 Customising preferences
114 Engb
Chapter
Customising preferences 21
Customising preferences
If there are more detailed categories within the
selected category, repeat this step as many
times as necessary.
If there aren’t any more detailed categories, a If there are more detailed categories within the
blank list appears. In this case, touching selected category, repeat this step until the de-
[New Group] allows you to create a new cate- sired POI appears.
gory.
4 Touch the POI you want.
4 Touch [New Group] at the screen where The “Edit POI” screen appears.
you want to create a new category.
5 Touch the desired key to customise it.
5 Enter the category name and touch
[Done] to complete the entry.
Available options;
! “Group:”
Engb 115
Chapter
21 Customising preferences
The category that the item currently se- 3 Touch [Record] to activate the track log-
lected belongs to can be changed. Touch- ger.
ing the key shows the options available.
Touch one of them to set the desired cate-
gory.
! “POI Name:”
Touching the key displays the screen for en-
tering a new POI name. Enter the name
and then touch [Done] to complete the
entry.
! “Icon:”
Touch this key to show options. Touch one
of them to set the desired icon. The key then changes to [Stop Recording].
! [Remove]: Touching [Stop Recording] allows you to de-
Touching the key allows you to delete the activate the track logger.
selected POI. Touching [Export all track logs] exports all
p [Remove] is available only for POIs that are track logs currently stored to the external sto-
created on this navigation system. rage device (USB or SD) at once.
p The POI address is not editable. In addition, if you export track logs to the exter-
nal storage devices, you can check the track
logs using [NavGate FEEDS].
Recording your travel history p If there is not enough space in the built-in
Activating the track logger enables you to re- memory, the oldest track log will be over-
cord your driving history (called “track log” written by the new one.
below). You can review the travel history later p If you want to permanently activate the
and replay the travel for your reference. track logger whenever the GPS signal is
available, switch “Enable Auto-saving” to
Activating track logger temporarily “On”.
= For details, refer to Setting track logger
One-time activation is useful if you want to
options on the next page.
create a log only for that trip.
1 Touch [Map Visual] on the “Navi Set- Browsing and replaying the track log
tings” menu.
1 Touch [Map Visual] on the “Navi Set-
The “Map Visual Settings” screen appears.
tings” menu.
2 Touch [Manage Track Logs]. The “Map Visual Settings” screen appears.
A list of track logs already recorded appears. A
2 Touch [Manage Track Logs].
blank list appears if you have not recorded it
A list of track logs already recorded appears.
yet.
Touching enables you to replay the track
log with “Fly over”.
116 Engb
Chapter
Customising preferences 21
4 Touch the desired key to operate it. 4 Touch the desired key to operate it.
Customising preferences
! [Export]:
Touch this key to export the currently se- ! “Enable Auto-saving”
lected track log to the external storage de- Sets whether or not automatic logging is
vice (USB or SD). activated.
! [Delete]: ! “Limit Track DB Size”
Touch this key to delete the track log. Limits the total data size for logging.
! [Delete all]: ! “Maximum track database size:”
Touching this key deletes all track logs. Sets a size limit on logging. This parameter
! The key next to “Colour on the map:”: is only adjustable when “Limit Track DB
Touching this key displays the screen for Size” is “On”.
changing the colour used for the route ! “Create NMEA Log”
highlighting of the track log. Touch the de- Creates the log files in the SD memory
sired colour on the colour list. The colour of card. When this setting is “On”, the system
track logs is assigned automatically within outputs the log files with NMEA-0183 for-
predefined colours when this setting is es- mat onto the SD memory card.
tablished.
Engb 117
Chapter
21 Customising preferences
118 Engb
Chapter
Customising preferences 21
Customising preferences
pears when the navigation system starts. Copy system returns to the “System Settings”
your chosen image to the external storage de- menu.
vice (USB, SD), and select the image to im-
port.
p Splash screen images should be used with- Setting the rear view camera
in the following formats; The following two functions are available. The
— BMP or JPEG files rear view camera feature requires a separately
— Allowable horizontal and vertical size sold rear view camera (e.g. ND-BC2). (For de-
are 2 592 pixels x 1 944 pixels or smaller tails, consult your dealer.)
— Allowable data size is 15 MB or smaller
p Proper compatibility with allowable files is Rear view camera
not guaranteed. The navigation system features a function that
p Imported original images will be stored in automatically switches to the full-screen rear
the built-in memory, but the ability to save view camera image installed on your vehicle.
these images cannot be guaranteed com- When the gear stick is in the REVERSE (R) po-
pletely. If your original image data is de- sition, the screen automatically switches to
leted, insert the external storage device full-screen rear view camera.
(USB, SD) again and re-import the original
Camera for “RearView”
image.
[RearView] can display the full-screen rear
1 Create a folder named “Pictures” on the view camera image any time without relation
top-most directory of the external storage to the gear stick position after touching [Rear-
device (USB, SD) and store the picture files View] on the “AV Source” menu. [RearView]
in this folder. is useful if you want to monitor an attached
trailer, etc.
2 Insert the SD memory card into the SD
card slot or plug the USB storage device
into the USB connector.
Engb 119
Chapter
21 Customising preferences
120 Engb
Chapter
Customising preferences 21
2 Touch [+] or [–] to adjust the brightness. Creating a user-defined colour and
Each time you touch [+] or [–] increases or de- storing it to memory
creases the level. 10 to 00 is displayed as the You can create a user-defined colour and set it
level is increased or decreased. as the illumination colour.
3 Touch to return to the previous 1 Touch [Illumi Color] on the “System Set-
screen. tings” menu.
p You can also start adjustment by pressing = For details, refer to Displaying the “System
and holding the MAP button. Settings” menu on page 118.
2 Touch [Custom].
Setting the illumination colour p If [Scan] is set, [Custom] cannot be se-
The illumination colour can be selected from lected.
11 different colours. Furthermore, the illumina-
tion colour can switched between these 11 col- 3 Touch [+] or [–] to adjust the values for
ours in order. Red, Green and Blue to create a favourite
colour.
Watch the illumination of hardware keys while
Customising preferences
Selecting the colour from the preset
adjusting the colour.
colours
Each time you touch [+] or [–] increases or de-
1 Touch [Illumi Color] on the “System Set- creases the value of the selected item. +31 to
tings” menu. +00 is displayed as the value is increased or
= For details, refer to Displaying the “System decreased.
Settings” menu on page 118.
Engb 121
Chapter
21 Customising preferences
Checking the version information % Touch [Screen Off] on the “System Set-
tings” menu.
1 Touch [Service Information] on the
= For details, refer to Displaying the “System
“System Settings” menu.
Settings” menu on page 118.
= For details, refer to Displaying the “System
The screen is turned off.
Settings” menu on page 118.
p Touch anywhere on the screen to turn it
2 Check the version information. back on.
3 Touch [OK].
The navigation system will now restart.
p You cannot make adjustments when the AV
source is “OFF”.
Turning off the screen
p You cannot select [SLA] when the FM tuner
By turning off the backlight of the LCD screen, is selected as the AV source.
you can turn off the screen display without
turning off the voice guidance.
122 Engb
Chapter
Customising preferences 21
Customising preferences
Each time you touch [a] or [b], the front/rear Natural
speaker balance moves towards the front or Natural is a curve in which low-pitched and high-
the rear. pitched sounds are slightly boosted.
“Front:15” to “Rear:15” is displayed as the Vocal
front/rear speaker balance moves from front to Vocal is a curve in which the midrange, which is the
human vocal range, is boosted.
rear.
Setting “Front:” and “Rear:” to “0” is correct Flat
when using a two speaker system. Flat is a flat curve in which nothing is boosted.
Custom1
3 Touch [c] or [d] to adjust left/right Custom1 is an adjusted equaliser curve that you cre-
speaker balance. ate. A separate custom curve can be created for each
Each time you touch [c] or [d], the left/right source.
speaker balance moves towards the left or the Custom2
right. Custom2 is an adjusted equaliser curve that you cre-
ate. If you select this curve, the effect is applied to all
AV sources.
Engb 123
Chapter
21 Customising preferences
Adjusting the equaliser curves You can select the equaliser band.
You can adjust the currently selected equaliser ! Frequency:
curve setting as desired. Adjustments can be You can select which frequency to set as
made with a 3-band parametric equaliser. the centre frequency.
! Level:
The difference between “Custom1” and You can select the decibel (dB) level of the
“Custom2” selected EQ.
! A separate Custom1 curve can be created ! Q:
for each source. If you make adjustments You can select the details of the curve char-
when a curve S.Bass, Powerful, Natural, acteristics. (The following figure shows the
Vocal, Flat, or Custom1 is selected, the characteristic image.)
equaliser curve settings will be memorised
in Custom1.
! A Custom2 curve can be created common
to all sources. If you make adjustments
when Custom2 curve is selected, the Cus-
tom2 curve will be updated.
! The adjusted Custom1 curve is memorised
for each of the source selected, but one
curve is shared for the following sources.
— CD, ROM, DVD-V, DVD-VR, DivX (for 1 Touch [EQ] on the “AV Sound Settings”
AVIC-F910BT and AVIC-F9110BT) menu.
— CD, ROM (for AVIC-F710BT) = For details, refer to Displaying the “AV
— AV1 and AV2 Sound Settings” menu on page 122.
! The different source volume level can be
2 Touch the one of keys to select a curve
set between iPod and USB.
that you want to use as the basis of custo-
! When [Flat] is selected, no supplement or
mising.
correction is made to the sound. This is
useful to check the effect of the equaliser 3 Touch [Customize].
curves by switching alternatively between
[Flat] and a set equaliser curve. 4 Touch [c] or [d] to select the equaliser
band to adjust.
Adjustable parameters Each time you touch [c] or [d] selects equali-
You can adjust the centre frequency, level and ser bands in the following order:
Q factor (curve characteristics) of each cur- Low — Mid — High
rently selected curve band (Low/Mid/High).
5 Touch [c] or [d] to select the desired
frequency.
Touch [c] or [d] until the desired frequency
appears in the display.
Low: 40 Hz — 80 Hz — 100 Hz — 160 Hz
Mid: 200 Hz — 500 Hz — 1 kHz — 2 kHz
High: 3.15 kHz — 8 kHz — 10 kHz —
12.5 kHz
! Band:
124 Engb
Chapter
Customising preferences 21
Customising preferences
1 Touch [Loudness] on the “AV Sound 5 Touch [+] or [–] next to “Frequency” to
Settings” menu. select cut-off frequency.
= For details, refer to Displaying the “AV Each time you touch [+] or [–], cut-off frequen-
Sound Settings” menu on page 122. cies are selected in the following order:
50 Hz — 63 Hz — 80 Hz — 100 Hz — 125 Hz
2 Touch [Loudness] to select the level you Only frequencies lower than those in the se-
want. lected range are output from the subwoofer.
Each time you touch [Loudness], the level is
selected in the following order:
Off — Low — Mid — High Using the high pass filter
When you do not want low sounds from the
subwoofer output frequency range to play
Using subwoofer output from the front or rear speakers, activate HPF
The navigation system is equipped with a sub- (high pass filter). Only frequencies higher than
woofer output mechanism, which can be those in the selected range are output from
turned on or off. the front or rear speakers.
p Only when “Sub Woofer” is [On], you can
adjust “Phase”, “Level” and “Frequency”. 1 Touch [HPF] on the “AV Sound Settings”
menu.
1 Touch [Sub Woofer] on the “AV Sound = For details, refer to Displaying the “AV
Settings” menu. Sound Settings” menu on page 122.
= For details, refer to Displaying the “AV
Sound Settings” menu on page 122. 2 Touch [HPF] to select cut-off frequency.
Each time you touch [HPF] selects cut-off fre-
2 Touch [On] to turn subwoofer output quencies in the following order:
on. Off — 50 Hz — 63 Hz — 80 Hz — 100 Hz —
To turn subwoofer output off, touch [Off]. 125 Hz
Engb 125
Chapter
21 Customising preferences
126 Engb
Chapter
Customising preferences 21
% Touch [AV1 Input] on the “AV System % Touch [Ant CTRL] on the “AV System
Settings” menu. Settings” menu.
= For details, refer to Displaying the “AV Sys- = For details, refer to Displaying the “AV Sys-
tem Settings” menu on the previous page. tem Settings” menu on the previous page.
Each touch of [AV1 Input] changes the set- Touching [Ant CTRL] switches between
ting as follows: [Radio] and [Power].
! iPod — iPod connected with the USB Inter- p Regardless of whether [Radio] or [Power]
face cable for iPod (CD-IU230V) is selected, turning off the ignition switch
! Video — External video component will cause the aeriel to automatically retract
! Off — No video component is connected or turn off.
Customising preferences
Each touch of [Wide Mode] changes the set-
% Touch [AV2 Input] on the “AV System
ting as follows:
Settings” menu.
Full — Normal
= For details, refer to Displaying the “AV Sys-
Full (full)
tem Settings” menu on the previous page.
A 4:3 picture is enlarged in the horizontal di-
Each touch of [AV2 Input] changes the set-
rection only, enabling you to enjoy a 4:3 TV pic-
ting as follows:
ture (normal picture) without any omissions.
! Off — No video component is connected
Normal (normal)
! Video — External video component
A 4:3 picture is displayed normally, giving you
p Use AV2 Input when connecting CD-RM10
no sense of disparity since its proportions are
(sold separately) through the external video
the same as that of the normal picture.
component.
p Different settings can be stored for each
video source.
Switching the auto aerial setting p The same setting is automatically applied
for the following grouping.
If the blue lead of the navigation system is
! SD, USB, iPod
connected to the aerial control terminal of the
! AV1 and AV2
vehicle, select either of the following settings.
p When video is viewed in a wide screen
! Radio — The aerial extends or turns on
mode that does not match its original as-
only when the audio source is FM or AM.
pect ratio, it may look strange.
The aerial is stored or turned off when the
p Remember that use of this system for com-
AV source is switched to another source.
mercial or public viewing purposes may
! Power — The aeriel extends or turns on
constitute an infringement on the author’s
when the ignition switch is turned on. The
rights protected by the Copyright Law.
aeriel is stored or turned off when the igni-
p The navigation map and the rear view cam-
tion switch is turned off.
era picture is always viewed at Full.
Engb 127
Chapter
21 Customising preferences
128 Engb
Chapter
Customising preferences 21
Customising preferences
Engb 129
Chapter
22 Other functions
130 Engb
Chapter
Other functions 22
Other functions
This transforms the system into the same state
as when the battery of the vehicle is removed
or the yellow lead of the navigation system is
disconnected.
Engb 131
Chapter
22 Other functions
[Favourites] — — 1
“Saved Criteria” on “POI” — — 1
[Set Home] — — 1
[GPS & Time Settings], [Map Visual], [Route],
— 1 1
[Warnings], [Regional Settings]
[Language] — 1 1
System Settings
Other settings — — 1
Pin icon data — — 1
(*1) The imported data is not deleted. Only the once deleted data is restored.
132 Engb
Chapter
Other functions 22
(*2) All settings including the setting on the “Function” menu are deleted.
[Missed Calls] — — 1
[Phone Settings] — — 1
Contacts (*3) All entries — — 1
Other functions
(*3) All stored data of 3 users is deleted.
Engb 133
Appendix
Appendix
Troubleshooting
If you have problems operating your navigation system, refer to this section. The most common
problems are listed below, along with likely causes and solutions. While this list is not comprehen-
sive, it should answer your most common problems. If a solution to your problem cannot be
found here, contact your dealer or the nearest authorised Pioneer service facility.
134 Engb
Appendix
Appendix
The navigation system may not be Check that the navigation system is securely
You cannot position your vehicle mounted securely in your vehicle. mounted and, if necessary, consult the dealer
on the map without a significant that installed the system.
positioning error.
The navigation system is installed Confirm the installation angle. (The naviga-
with an extreme angle exceeding tion system must be installed within the al-
the installation angle limitations. lowed installation angle. For details, refer to
“Installation Manual”.)
Indication of the position of your ve- Check whether or not the reverse gear signal
hicle is misaligned after a U-turn or input lead (violet) is connected properly. (The
reversing. navigation system works properly without the
lead connected, but positioning accuracy will
be adversely affected.)
The map colour does not switch [Night mode] is set to [Day]. Check [Night mode] setting and make sure
automatically between daytime [Automatic] is selected. (Page 108)
and nighttime. The orange/white lead is not con- Check the connection.
nected.
The screen is too bright. An improper value has been set on Check the settings.
“Brightness”.
The display is very dim. [Night] is selected in “Night Check the setting of [Night mode] and select
mode”. [Automatic] or [Day]. (Page 108)
An improper value has been set on Check the settings.
“Brightness”.
Appendix
No sounds of AV source are pro- The volume level is low. Adjust the volume level.
duced.
The attenuator or mute is on. Turn the attenuator or mute off.
The volume level will not rise.
A speaker lead is disconnected. Check the connection.
The volume of navigation gui- Try to adjust them with MULTI-CON- Turn the volume up or down using [Sound
dance and beeps cannot be ad- TROL. settings] on the “Navi Settings” menu.
justed. (Page 113)
The person on the other end of The voice from the person on the Use the following methods to reduce the
the phone call cannot hear the other end of the phone call is output echo:
conversation due to an echo. from the speakers and then picked —Lower the volume on the receiver
up by the microphone again, creat- —Have both parties pause slightly before
ing an echo. speaking
There’s no picture. The handbrake cord is not con- Connect the handbrake cord, and apply the
nected. handbrake.
The handbrake is not applied. Connect the handbrake cord, and apply the
handbrake.
The backlight of the LCD panel is Turn on the backlight. (Page 122)
turned off.
“Rear display” picture disap- The source disc being listened to in Before ejecting the disc, switch the source.
pears. (This information is in- the navigation system has been This problem may occur when certain con-
tended for AVIC-F910BT and ejected. nection methods are used.
AVIC-F9110BT.) There is a problem with the “Rear Check the “Rear display” and its connection.
display”, for example a faulty wiring
connection.
An AV source that cannot output to Select an appropriate AV source.
the rear display is selected.
Engb 135
Appendix
Appendix
The setting for the rear view camera Select the appropriate setting for the rear
Nothing is displayed and the is incorrect. view camera.
touch panel keys cannot be
The gearstick was placed in [R] Press the MAP button, and then press the
used.
when the rear view camera was not MENU button to return to the “Top Menu”
connected. and then select the correct polarity setting for
[Back Camera]. (Page 119)
There is no response when the The touch panel keys deviate from Perform touch panel calibration. (Page 120)
touch panel key are touched, or the actual positions that respond to
a different key responds. your touch for some reason.
The external storage device The USB storage device has been Park your vehicle in a safe place, and turn off
(USB, SD) cannot be used. removed immediately after plugging the engine. Turn the ignition key back to “Acc
it. off”. Then start the engine again, and turn the
power to the navigation system back on.
136 Engb
Appendix
Appendix
The operation is not compatible This operation is not possible. (For example,
The icon 9 is displayed, and op- with the video configuration. the DVD playing does not feature that angle,
eration is not possible. audio system, subtitle language, etc.)
The picture stops (pauses) and The reading of data is impossible After touching g once, start playback once
the navigation system cannot be during disc playback. more.
operated.
The picture is stretched, with in- The aspect setting is incorrect for Select the appropriate setting for that image.
correct aspect ratio. the display. (Page 127, Page 79)
A parental lock message is dis- Parental lock is on. Turn parental lock off or change the level.
played and DVD playback is not (Page 79)
possible.
Parental lock for DVD playback The code number is incorrect. Input the correct code number. (Page 79)
cannot be cancelled.
Playback is not with the audio The DVD playing does not feature Switching to a selected language is not possi-
language and subtitle language dialogue or subtitles in the lan- ble if the language selected in [DVD Setup]
settings selected in [DVD guage selected in [DVD Setup]. is not recorded on the disc.
Setup].
The picture is extremely unclear/ The disc features a signal to prohibit Since the navigation system is compatible
distorted and dark during play- copying. (Some discs may have with the copy guard analogue copy protect
back. this.) system, the picture may suffer from horizon-
tal stripes or other imperfections when a disc
with that kind of protection signal is viewed
on some displays. This does not mean the na-
Appendix
vigation system is malfunctioning.
Cannot be operated. The iPod is frozen. ! Reconnect the iPod with the USB interface
cable for iPod.
! Update the iPod software version.
An error has occurred. ! Reconnect the iPod with the USB interface
cable for iPod.
! Park your vehicle in a safe place, and turn
off the engine. Turn the ignition key back to
“Acc off”. Then start the engine again, and
turn the power to the navigation system back
on. If this does not solve the problem, press
the RESET button on the navigation system.
! Update the iPod software version.
Engb 137
Appendix
Appendix
138 Engb
Appendix
Appendix
Appendix
The mobile phone’s Bluetooth wire- Activate the target phone’s Bluetooth wire-
less technology is turned off. less technology.
The mobile phone is paired (con- Cancel the pairing (connection) and retry.
nected) with another device.
Rejection has been received from Operate the target phone and accept the con-
the mobile phone. nection request from the navigation system.
(Furthermore, check the connection settings
on your mobile phone.)
The target mobile phone cannot be Check whether your mobile phone is acti-
found. vated and, whether the distance to your mo-
bile phone is not too far.
Could not find any available No available phone exists in the sur- ! Activate the target phone’s Bluetooth wire-
phone. roundings when the system less technology.
searches for connectable mobile ! Check whether your mobile phone is acti-
phones featuring Bluetooth wireless vated and, whether the distance to your mo-
technology. bile phone is not too far.
Dataloading failed. You may have transferred the data ! Select a suitable item and format, then
from your mobile phone in a format retry. (Page 59)
cannot be received by the naviga- ! Connect your mobile phone with another
tion system. method again and retry. (Page 48)
Your mobile phone can not The connected mobile phone has Depending on the mobile phone, phone book
support this feature. no compatibility with the phone transfer may not be available.
book transfer function of this navi-
gation system.
Engb 139
Appendix
Appendix
140 Engb
Appendix
Appendix
SD/USB/iPod
Message Cause Action (Reference)
Non-playable tracks are Files that are protected by digital The protected files are skipped.
skipped. rights management.
Impossible to play all tracks. All the files on the inserted external Store playable files.
storage device are secured by DRM.
An error occurred on USB con- The USB connector or USB cable is Confirm that the USB connector or USB
nection. USB devices are not short-circuited. cable is not caught in something or da-
available to use and iPod maged.
power supply is also unavail-
Appendix
The connected USB storage device Disconnect the USB storage device and do
able. consumes more than 500 mA (maxi- not use it. Turn the ignition switch to OFF,
mum allowable current). then to ACC or ON and then connect the
compliant USB storage device.
The USB interface cable for iPod is Confirm that USB interface cable for iPod or
short-circuited. USB cable is not caught in something or da-
maged.
Connected iPod is not sup- The iPod is not compatible with this Use an iPod of a compatible version.
ported. Please check instruc- navigation system.
tion manual.
iPod connection failed. Please Communication failure ! Disconnect the cable from iPod. Once iPod
reconnect. main menu is displayed, connect the cable
again.
! If the message appears frequently, consult
your dealer.
Engb 141
Appendix
Appendix
142 Engb
Appendix
Appendix
Appendix
When driving When driving through
among high build- a dense forest or tall
ings trees
Engb 143
Appendix
Appendix
! If you take a recently opened road that is ! If you are driving on a long, straight road or
not on the map. a gently curving road.
144 Engb
Appendix
Appendix
! If you are on a steep mountain road with ! If trees or other obstacles block the GPS
many height changes. signals for a considerable period.
! If you enter or exit a multi-storey car park or ! If you drive very slowly, or in a start-and-
similar structure using a spiral ramp. stop manner, as in a traffic jam.
! If your vehicle is turned on a turntable or si- ! If you join the road after driving around a
milar structure. large car park.
Appendix
! When you drive around a roundabout.
! If your vehicle’s wheels spin, such as on a
gravel road or in snow.
Engb 145
Appendix
Appendix
146 Engb
Appendix
Appendix
Car train (start and end) ! Do not touch the recorded surface of the
discs.
Other information ! Store discs in their cases when not in use.
! Avoid leaving discs in excessively hot envir-
onments including under direct sunlight.
! Do not attach labels, write on or apply che-
Supplemental information about
micals to the surface of the discs.
traffic icon
! To clean a disc, wipe it with a soft cloth,
Icon Meanings moving outward from the centre.
Stop-and-go traffic
Stopped traffic
Closed/blocked roads
Appendix
Warnings, other dangers
cause of disc characteristics, disc format,
recorded application, playback environ-
Bad weather conditions
ment, storage conditions and so on.
! Road shocks may interrupt disc playback.
Police ahead
! Read the precautions for discs before
using them.
Engb 147
Appendix
Appendix
Dolby Digital
AVIC-F910BT and AVIC-F9110BT will down-mix
CD Dolby Digital signals internally and the sound
will be output by the stereo.
p Manufactured under licence from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby
Laboratories.
Playing DualDisc
! DualDiscs are two-sided discs that have a
recordable CD for audio on one side and a
recordable DVD for video on the other.
! Playback of the DVD side is possible with
this navigation system. However, since the
CD side of DualDiscs is not physically com-
patible with the general CD standard, it
may not be possible to play the CD side
with this navigation system.
! Frequent loading and ejecting of a Dual-
Disc may result in scratches to the disc.
148 Engb
Appendix
Appendix
Appendix
can be found on this product’s chassis. of media, recorders, or writing software.)
! Titles and other text information recorded
DVD-R/DVD-RW/DVD-R DL (Dual on a CD-R/CD-RW disc may not be dis-
Layer) discs played by this product (in the case of audio
data (CD-DA)).
! Unfinalised discs which have been re-
! Read the precautions with CD-R/CD-RW
corded with the Video format (video mode)
discs before using them.
cannot be played back.
! Discs which have been recorded with the
Video Recording format (VR mode) can be Common notes about the external
played back. However, unfinalised discs storage device (USB, SD)
may not be played back. Unplayable discs ! Depending on the kind of the external sto-
should be finalised. rage device (USB, SD) you use, this naviga-
! DVD-R DL (Dual Layer) discs which have tion system may not recognise the storage
been recorded with Layer Jump recording device or files may not be played back prop-
cannot be played back. erly.
! For more information about recording ! Do not leave the external storage device
mode, please contact the manufacturer of (USB, SD) in any location with high tem-
media, recorders, or writing software. peratures.
! The following logo indicates that this unit is ! The text information of some audio and
compatible with DVD-RW discs which have video files may not be correctly displayed.
been recorded with the Video Recording ! File extensions must be used properly.
format (VR mode).
Engb 149
Appendix
Appendix
! There may be a slight delay when starting SD memory card and SDHC memory card
playback of files on an external storage de- ! For more details about SD memory card
vice (USB, SD) with complex folder hierar- compatibility with this navigation system,
chies. refer to Specifications on page 168.
! Operations may vary depending on the
kind of an external storage device (USB,
Handling guidelines and
SD).
! It may not be possible to play some music supplemental information
files from SD or USB because of file char- ! This system is not compatible with Multi
acteristics, file format, recorded applica- Media Card (MMC).
tion, playback environment, storage ! Copyright protected files cannot be played
conditions, and so on. back.
! Video playback from SD or USB will be
paused when the navigation is displayed. Notes specific to DivX files
! Only DivX files downloaded from DivX part-
USB storage device compatibility ner sites are guarantee for proper opera-
= For more details about USB storage device tion. Unauthorised DivX files may not
compatibility with this navigation system, operate properly.
refer to Specifications on page 168. ! DRM rental files cannot be operated until
Protocol: bulk playing back is started.
Subclass: SCSI (06h) ! The navigation system corresponds to a
! You cannot connect a USB storage device DivX file display of up to 1 590 minutes 43
to this navigation system via a USB hub. seconds. Search operations beyond this
! Partitioned USB memory is not compatible time limit are prohibited.
with this navigation system. ! DivX VOD file playback requires supplying
! Firmly secure the USB storage device when the ID code of this navigation system to the
driving. Do not let the USB storage device DivX VOD provider. Regarding the ID code,
fall onto the floor, where it may become refer to Displaying your DivX VOD registra-
jammed under the brake or accelerator tion code on page 80.
pedal. ! Plays all versions of DivX video (including
! There may be a slight delay when starting DivX 6) with standard playback of DivX
playback of audio files encoded with image media files.
data. ! For more details about DivX, visit the follow-
! Some USB storage devices connected to ing site:
this navigation system may generate noise http://www.divx.com/
on the radio.
DivX subtitle files
! Do not connect anything other than the
! Srt format subtitle files with the extension
USB memory device.
“.srt” can be used.
The sequence of audio files on USB mem-
! Only one subtitle file can be used for each
ory
DivX file. Multiple subtitle files cannot be
For USB memory, the sequence is different
associated.
from that of USB memory device.
150 Engb
Appendix
Appendix
Appendix
! The subtitles may not be displayed correctly
if the displayed characters in the subtitle
file include control code.
! For materials that use a high transfer rate,
the subtitles and video may not be comple-
tely synchronised.
! If multiple subtitles are programmed to dis-
play within a very short time frame, such as
0.1 seconds, the subtitles may not be dis-
played at the correct time.
Engb 151
Appendix
Appendix
DVD-R/-RW/-
CD-R/-RW USB storage SD memory
CD-R/-RW R DL
Media AVIC-F910BT, device card
AVIC-F710BT AVIC-F910BT,
AVIC-F9110BT (All models) (All models)
AVIC-F9110BT
ISO9660 level 1,
ISO9660 level 1,
ISO9660 level 2,
File system ISO9660 level 2, FAT16/FAT32
Romeo, Joliet
Romeo and Joliet
and UDF 1.02
Maximum number FAT32: No limit.
99 700
of folders FAT16: 512 (including files)
Maximum number FAT32: No limit.
999 3 500
of files FAT16: 512 (including folders)
MP3, WMA, MP3, WMA, AAC, WAV, AVI,
Playable file types MP3, WMA, AAC, DivX
AAC, WAV MPEG-4
MP3 compatibility
DVD-R/-RW/-
CD-R/-RW USB storage SD memory
CD-R/-RW R DL
Media AVIC-F910BT, device card
AVIC-F710BT AVIC-F910BT,
AVIC-F9110BT (All models) (All models)
AVIC-F9110BT
File extension .mp3
Notes:
! Ver. 2.x of ID3 Tag is given priority when both Ver. 1.x and Ver. 2.x exist.
! The navigation system is not compatible with the following:
MP3i (MP3 interactive), mp3 PRO, m3u playlist
152 Engb
Appendix
Appendix
WMA compatibility
DVD-R/-RW/-
CD-R/-RW USB storage SD memory
CD-R/-RW R DL
Media AVIC-F910BT, device card
AVIC-F710BT AVIC-F910BT,
AVIC-F9110BT (All models) (All models)
AVIC-F9110BT
File extension .wma
Note:
! The navigation system is not compatible with the following:
Windows Media Audio 9 Professional, Lossless, Voice
WAV compatibility
DVD-R/-RW/-
CD-R/-RW USB storage SD memory
CD-R/-RW R DL
Media AVIC-F910BT, device card
AVIC-F710BT AVIC-F910BT,
AVIC-F9110BT (All models) (All models)
AVIC-F9110BT
Appendix
File extension .wav .wav
Linear PCM
Format (LPCM), MS Linear PCM (LPCM), IMA-ADPCM
ADPCM
LPCM: 16 kHz to
48 kHz AVIC-F910BT and AVIC-F9110BT LPCM: 16 kHz to 48 kHz
Sampling frequency MS ADPCM: cannot play WAV files on the built- IMA-ADPCM: 22.05 kHz and
22.05 kHz and in DVD drive. 44.1 kHz
44.1 kHz
LPCM: 8 bits
and 16 bits LPCM: 8 bits and 16 bits
Quantisation bits
MS ADPCM: IMA-ADPCM: 3 bits and 4 bits
4 bits
Note:
The sampling frequency shown in the display may be rounded.
Engb 153
Appendix
Appendix
AAC compatibility
DVD-R/-RW/-
CD-R/-RW USB storage SD memory
CD-R/-RW R DL
Media AVIC-F910BT, device card
AVIC-F710BT AVIC-F910BT,
AVIC-F9110BT (All models) (All models)
AVIC-F9110BT
File extension .m4a
Bit rate 16 kbps to 320 kbps (CBR) 8 kbps to 320 kbps (CBR)
11 kHz to
Sampling frequency 8 kHz to 44.1 kHz
44.1 kHz
Notes:
! The navigation system plays back AAC files encoded by iTunes.
! The navigation system is not compatible with the following:
Apple Lossless, files encoded with VBR
DivX compatibility
DVD-R/-RW/-
CD-R/-RW USB storage SD memory
CD-R/-RW R DL
Media AVIC-F910BT, device card
AVIC-F710BT AVIC-F910BT,
AVIC-F9110BT (All models) (All models)
AVIC-F9110BT
File extension .avi/.divx
Profile (DivX ver- Home Theater Ver. 3.11/Ver. 4.x/
sion) Ver. 5.x/Ver. 6.x
Compatible audio
MP3, Dolby Digital
codec
AVIC-F710BT DivX files on the external storage
Bit rate (MP3) cannot play 8 kbps to 320 kbps (CBR), VBR device (USB, SD) cannot be
DivX files. played.
Sampling frequency 16 kHz to 48 kHz (32 kHz, 44.1 kHz,
(MP3) 48 kHz for emphasis)
Maximum image
720 pixels × 576 pixels
size
Maximum file size 4 GB
Notes:
! The navigation system is not compatible with the following:
DivX Ultra format, DivX files without video data, DivX files encoded with LPCM (Linear PCM) audio codec
! Depending on the file information composition, such as the number of audio streams, there may be a slight
delay in the start of playback on discs.
! If a file contains more than 4 GB, playback stops before the end.
! Some special operations may be prohibited because of the composition of DivX files.
! Files with high transfer rates may not be played back correctly. The standard transfer rate is 4 Mbps for CDs and
10.08 Mbps for DVDs.
154 Engb
Appendix
Appendix
AVI compatibility
DVD-R/-RW/-
CD-R/-RW USB storage SD memory
CD-R/-RW R DL
Media AVIC-F910BT, device card
AVIC-F710BT AVIC-F910BT,
AVIC-F9110BT (All models) (All models)
AVIC-F9110BT
File extension .avi
Compatible video
MPEG-4
codec
Compatible audio
AVI files cannot be played on the built-in drive. ADPCM
codec
Image size: VGA (640 pixels x 480
Recommended pixels)
video specifications Bit rate: 480 kbps
Frame rate: 24 fps
MPEG-4 compatibility
DVD-R/-RW/-
CD-R/-RW USB storage SD memory
CD-R/-RW R DL
Media AVIC-F910BT, device card
AVIC-F710BT AVIC-F910BT,
AVIC-F9110BT (All models) (All models)
AVIC-F9110BT
Appendix
File extension .mp4
Compatible video
MPEG-4
codec
Compatible audio
MPEG-4 files cannot be played on the built-in drive. AAC
codec
Image size: VGA (640 pixels x 480
Recommended pixels)
video specifications Bit rate: 480 kbps
Frame rate: 24 fps
Engb 155
Appendix
Appendix
! Regardless of the length of blank section Bluetooth is a short-range wireless radio con-
between the songs of original recording, nectivity technology that is developed as a
compressed audio discs play with a short cable replacement for mobile phones, hand-
pause between songs. held PCs and other devices. Bluetooth oper-
ates in 2.4 GHz frequency range and transmits
Example of a hierarchy voice and data at speeds up to 1 megabit per
second. Bluetooth was launched by a special
The following figure is an example of the tier
interest group (SIG) comprising Ericsson Inc.,
structure in the disc. The numbers in the fig-
Intel Corp., Nokia Corp., Toshiba and IBM in
ure indicate the order in which folder numbers
1998, and it is currently developed by nearly
are assigned and the order to be played back.
2 000 companies worldwide.
: Folder
! The Bluetoothâ word mark and logos are re-
: File
gistered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by
Pioneer Corporation is under licence. Other
1 trademarks and trade names are those of
2 their respective owners.
3
4
SD and SDHC logo
5
6
SD Logo is a trademark.
Notes
! This product assigns folder numbers. The user
cannot assign folder numbers.
! If there is a folder that does not contain any
playable file, the folder itself will display in the
folder list but you cannot check any files in
SDHC Logo is a trademark.
the folder. (A blank list will appear.) Also,
these folders will be skipped without display-
ing the folder number.
WMA
Bluetooth
156 Engb
Appendix
Appendix
iPod
Appendix
DivX is a compressed digital video format cre-
ated by the DivX video codec from DivX, Inc.
This unit can play DivX video files recorded on
CD-R/RW/ROM and DVD-R/RW/ROM discs.
Keeping the same terminology as DVD video,
individual DivX video files are called “Titles”.
When naming files/titles on a CD-R/RW or a
DVD-R/RW disc prior to burning, keep in mind
that by default they will be played in alphabeti- “Made for iPod” means that an electronic ac-
cal order. cessory has been designed to connect specifi-
Plays DivXâ video. cally to iPod and has been certified by the
p DivXâ is a registered trademark of DivX, developer to meet Apple performance stan-
Inc., and is used under license. dards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.
AAC iPod is a trademark of Apple Inc., registered in
AAC is short for Advanced Audio Coding and the U.S. and other countries.
refers to an audio compression technology
standard used with MPEG-2 and MPEG-4. Sev-
eral applications can be used to encode AAC
files, but file formats and extensions differ de-
pending on the application which is used to
encode. This unit plays back AAC files en-
coded by iTunes version 4.6.
Engb 157
Appendix
Appendix
158 Engb
Appendix
Appendix
Appendix
Engb 159
Appendix
Appendix
Display information
Destination Menu Phone Menu
Page Page
[Address] 24 [Dial Pad] 53
[POI] [Call Home] 54
[Edit Route] 44
[Save Route] 44
[Coordinate] 30
[Traffic] 46
160 Engb
Appendix
Appendix
Settings Menu
Navi Settings
[Map Visual]
Appendix
[Map Settings] 108
[Route]
[Method:] 110
[Warnings]
Engb 161
Appendix
Appendix
Page Page
162 Engb
Appendix
Appendix
Page
[FAD/BAL] ([Balance]) 123
Page
[EQ] 123 [Map] 34
[Loudness] 125 [Save as...] 36
[Sub Woofer] 125 [Add Pin] 37
[HPF] 125 [Add POI] 38
[SLA] 126 [Add Favourite] 39
[Bass Booster] 126 [Add Cam] 39
Appendix
[Route...] 35
[Go Here Now] 36
[Add Via] 36
[Continue] 36
[Starting Point] 37
[Info] 37
[Call] 54
Engb 163
Appendix
Appendix
DVD Setup
Page
[Language] 78
[Multi Angle] 78
[TV Aspect] 79
[Parental] 79
[DivX VOD] 80
[Auto Play] 80
[Subtitle File] 80
164 Engb
Appendix
Appendix
Glossary DivX
DivX is a popular media technology created by
AAC DivX, Inc. DivX media files contain highly com-
AAC is short for Advanced Audio Coding and pressed video with high visual quality that
refers to an audio compression technology maintains a relatively small file size. DivX files
standard used with MPEG-2 and MPEG-4. can also include advanced media features like
menus, subtitles, and alternate audio tracks.
Aspect ratio
Many DivX media files are available for down-
This is the width-to-height ratio of a TV screen.
load online, and you can create your own
A regular display has an aspect ratio of 4:3.
using your personal content and easy-to-use
Wide screen displays have an aspect ratio of
tools from DivX.com.
16:9, providing a bigger picture for exceptional
presence and atmosphere. DivX Certified
DivX Certified products are officially tested by
Bit rate
the creators of DivX and guaranteed to play all
This expresses data volume per second, or bps
versions of DivX video, including DivX 6.
units (bits per second). The higher the rate,
the more information is available to reproduce Favourites
the sound. Using the same encoding method A frequently visited location (such as your
(such as MP3), the higher the rate, the better workplace or a relative’s home) that you can
the sound. register to allow easy routing.
Built-in sensor
Appendix
GPS
The built-in sensor that enables the system to Global Positioning System. A network of satel-
estimate your vehicle’s position. lites that provides navigation signals for a vari-
ety of purposes.
CD-DA
This stands for a general music CD (commer- Guidance mode
cial-release audio CD). In this manual, this The mode in which guidance is given as you
word is sometime used for a distinction be- drive to your destination; the system automati-
tween data CDs (which include compressed cally switches to this mode as soon as a route
audio files) and general music CDs. has been set.
Chapter Guidance point
Titles of DVD-Video or DVD-VR are in turn di- These are important landmarks along your
vided into chapters which are numbered in route, generally intersections. The next gui-
the same way as the chapters of a book. With dance point along your route is indicated on
discs featuring chapters, you can quickly find the map by the yellow flag icon.
a desired scene with chapter search.
Home location
Current location Your registered home location.
The present location of your vehicle; your cur-
rent location is shown on the map by a red tri-
angle mark.
Destination
A location you choose as the end point of your
journey.
Engb 165
Appendix
Appendix
166 Engb
Appendix
Appendix
Appendix
Point of Interest (POI) VBR
Point Of Interest; any of a range of locations VBR is short for variable bit rate. Generally
stored in the data, such as railway stations, speaking, CBR (constant bit rate) is more
shops, restaurants, and amusement parks. widely used. But by flexibly adjusting the bit
rate according to the needs of audio compres-
RDS-TMC sion, it is possible to achieve compression-
A communication system for informing drivers priority sound quality.
of the latest traffic information using FM multi-
plex broadcast. Information such as traffic Voice guidance
jams or accidents can be checked on the dis- The giving of directions by navigation voice
play. while in guidance.
Engb 167
Appendix
Appendix
Specifications Display
Screen size/aspect ratio ....... 5.8 inch wide/16:9
General (effective display area:
Rated power source ............... 14.4 V DC 128 mm × 72 mm)
(allowable voltage range: Pixels ............................................. 384 000 (800 × 480)
12.0 V to 14.4 V DC) Display method ........................ TFT Active matrix driving
Earthing system ....................... Negative type Backlight ..................................... LED
Maximum current consumption Colour system:
........................................... 10.0 A AVIC-F910BT, AVIC-F9110BT
Dimensions (W × H × D): ........................................... NTSC/PAL compatible
AVIC-F910BT, AVIC-F710BT AVIC-F710BT .................... NTSC
DIN Tolerable temperature range:
Chassis ..................... 178 mm × 100 mm × Power on ............................ –10 °C to +60 °C
149 mm Power off ............................ –20 °C to +80 °C
Nose ........................... 188 mm × 118 mm ×
16 mm Audio
D Maximum power output ....... 50 W × 4
Chassis ..................... 178 mm × 100 mm × 50 W × 2 ch/4 W + 70 W ×
157 mm 1 ch/2 W (for subwoofer)
Nose ........................... 171 mm × 97 mm × 8 mm Continuous power output ... 22 W × 4 (50 Hz to 15 kHz,
AVIC-F9110BT 5 %THD, 4 W LOAD, Both
D Channels Driven)
Chassis ..................... 178 mm × 100 mm × Load impedance ...................... 4 W (4 W to 8 W [2 W for 1 ch]
148 mm allowable)
Nose ........................... 219 mm × 129 mm × Preout output level (max) .... 2.2 V
22 mm Preout impedance .................. 1 kohm
Weight: Equaliser (3-Band Parametric Equaliser):
AVIC-F910BT .................... 2.6 kg Low
AVIC-F710BT .................... 2.6 kg Frequency ................ 40 Hz/80 Hz/100 Hz/160 Hz
AVIC-F9110BT .................. 2.3 kg Q Factor .................... 0.35/0.59/0.95/1.15 (+6 dB
NAND flash memory ............. 2 GB when boosted)
Gain ............................ ±12 dB
Navigation Mid
GPS Receiver: Frequency ................ 200 Hz/500 Hz/1 kHz/2 kHz
System ................................ L1, C/Acode GPS Q Factor .................... 0.35/0.59/0.95/1.15 (+6 dB
SPS (Standard Positioning when boosted)
Service) Gain ............................ ±12 dB
Reception system .......... 30-channel multi-channel High
reception system Frequency ................ 3.15 kHz/8 kHz/10 kHz/
Reception frequency .... 1 575.42 MHz 12.5 kHz
Sensitivity .......................... –140 dBm (typ) Q Factor .................... 0.35/0.59/0.95/1.15 (+6 dB
Position update frequency when boosted)
........................................... Approx. once per second Gain ............................ ±12 dB
GPS aerial: Loudness contour:
Aerial ................................... Micro strip flat aerial/right- Low ....................................... +3.5 dB (100 Hz), +3 dB
handed helical polarisation (10 kHz)
Aerial cable ...................... 5.0 m Mid ....................................... +10 dB (100 Hz), +6.5 dB
Dimensions (W × H × D) (10 kHz)
........................................... 33 mm × 15 mm × 36 mm High ..................................... +11 dB (100 Hz), +11 dB
Weight ................................ 96 g (10 kHz)
(volume: –30 dB)
HPF:
Frequency .......................... 50 Hz/63 Hz/80 Hz/100 Hz/
125 Hz
168 Engb
Appendix
Appendix
Slope .................................... –12 dB/oct WAVE SIGNAL FORMAT ...... Linear-PCM, MS ADPCM
Subwoofer: (Non Compressed)
Frequency .......................... 50 Hz/63 Hz/80 Hz/100 Hz/
125 Hz USB
Slope .................................... –18 dB/oct USB standard spec. ............... USB 2.0 High Speed
Gain ...................................... –24/+6 dB Max current supply ................. 500 mA
Phase .................................. Normal/Reverse Max memory capacity ........... 8 GB
Bass boost: File system .................................. FAT16, FAT32
Gain ...................................... 0 dB to +12 dB USB class .................................... Mass storage class
Decoding format ...................... MP3/WMA/AAC/WAVE/
DVD drive (AVIC-F910BT and AVIC-F9110BT) MPEG4
System .......................................... DVD-Video, CD, MP3, WMA,
AAC, DivX system SD
Usable discs .............................. DVD-Video, CD, MP3, WMA, Compatible physical format
AAC, DivX ..................................................... Version 2.00
Region number ........................ 2 Max memory capacity ........... 8 GB
Signal format: File system .................................. FAT16, FAT32
Sampling frequency ..... 44.1 kHz/48 kHz/96 kHz Decoding format ...................... MP3/WMA/AAC/WAVE/
Number of quantisation bits MPEG4
........................................... 16 bit/20 bit/24 bit; linear
Frequency response ............... 5 Hz to 44 000 Hz (with DVD, Bluetooth
at sampling frequency Version .......................................... Bluetooth 1.2 certified
96 kHz) Output power ............................ +4 dBm Max.
Signal-to-noise ratio ............... 97 dB (1 kHz) (IEC-A net- (Power class 2)
work)
Appendix
(CD: 96 dB (1 kHz) (IEC-A FM tuner
network)) Frequency range ...................... 87.5 MHz to 108.0 MHz
Dynamic range ......................... 95 dB (1 kHz) (CD: 94 dB Usable sensitivity ..................... 8 dBf (0.7 µV/75 W, mono,
(1 kHz)) S/N: 30 dB)
Distortion ..................................... 0.008 % (1 kHz) Signal-to-noise ratio ............... 75 dB (IEC-A network)
Output level: Distortion ..................................... 0.3 % (at 65 dBf, 1 kHz,
Video .................................... 1.0 Vp-p/75 W (±0.2 V) stereo)
Audio ................................... 1.0 V (1 kHz, 0 dB) 0.1 % (at 65 dBf, 1 kHz,
Number of channels .............. 2 (stereo) mono)
MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3 Frequency response ............... 30 Hz to 15 000 Hz (±3 dB)
WMA decoding format ......... Ver.9.0 L3 Stereo separation .................... 45 dB (at 65 dBf, 1 kHz)
AAC decoding format ............ MPEG-4 AAC (only encoded
by iTunes): MW tuner
.m4a Frequency range ...................... 531 kHz to 1 602 kHz (9 kHz)
DivX decoding format ............ Home Theater Ver.3.11, Usable sensitivity ..................... 18 µV (S/N: 20 dB)
Ver.4.X, Ver.5.X, Ver.6.X : Signal-to-noise ratio ............... 65 dB (IEC-A network)
.avi, .divx
LW tuner
CD drive (AVIC-F710BT) Frequency range ...................... 153 kHz to 281 kHz
System .......................................... CD, MP3, WMA, AAC sys- Usable sensitivity ..................... 30 µV (S/N: 20 dB)
tem Signal-to-noise ratio ............... 65 dB (IEC-A network)
Usable discs .............................. CD, MP3, WMA, AAC
Signal-to-noise ratio ............... 94 dB (1 kHz) (IEC-A net- Note
work)
MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3 Specifications and design are subject to possible
WMA decoding format ......... Ver.7,7.1,8,9,10 (2 ch audio) modifications without notice due to im-
(Windows Media Player) provements.
AAC decoding format ............ MPEG-4 AAC (iTunes en-
coded only)
Engb 169
PIONEER CORPORATION
4-1, MEGURO 1-CHOME, MEGURO-KU
TOKYO 153-8654, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: (800) 421-1404
PIONEER EUROPE NV Published by Pioneer Corporation.
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique Copyright © 2009 by Pioneer Corporation.
TEL: (0) 3/570.05.11 All rights reserved.
<CRB2989-A> EU
<KKYZX> <09E00000> OM-9107109110-EN