Documente Academic
Documente Profesional
Documente Cultură
WELDING CONSUMABLES
The whole world of welding technology from one single supply source:
The responsibility for the complete process chain is carried by one single system partner:
EWM!!
www.ewm-group.com
INDEX BY PRODUCTS
www.ewm-group.com EWM reserves the right to change specifications without prior notice. 1
INDEX BY PRODUCTS
2 EWM reserves the right to change specifications without prior notice. www.ewm-group.com
SE 7016 BR Un-alloyed
Description:
• Basic-rutile coated, double-casing electrode.
• Can be welded in any position except vertical-down.
• Good slag removal characteristics, low spatter tendency.
• Very good ignition characteristics.
• Excellent for out-of-position welding.
• Very good mechanical quality values.
• CTOD tested welding material.
Classification:
DIN EN ISO 2560-A:2005 E 42 2 B 12 H 10
AWS A5.1 E 7016
DIN 1913 E 51 43 B(R)10
Approvals: TÜV, DB
Chemical C Si Mn
Mechanical properties:
Yield strength, Re : 380 N/mm²
Tensile Strength, Rm : 610 N/mm²
Elongation, A5 : 22%
Impact energy, CV: -20°C > 47 J
Welding current: DC+; AC
Shielding gas:
Coating Basic-Rutile
Metal recovery: 98%
Redrying temperature: 380°C - 1 h
www.ewm-group.com EWM reserves the right to change specifications without prior notice. 3
SE 7018 BH5 Un-alloyed
Description:
• Basic coated, reduced hydrogen stick electrode.
• Can be welded in any position except vertical-down.
• Good slag removal characteristics, low spatter tendency.
• Very good ignition characteristics.
• Excellent for out-of-position welding.
• Excellent, mechanical quality values.
• CTOD tested welding material.
Classification:
EN ISO 2560-A:2005 E 42 4B 32 H5
AWS A-5.1 E 7018
DIN 1913 E 51 55 B 10
Mechanical properties:
Yield strength, Re : 440 N/mm²
Tensile Strength, Rm : 610 N/mm²
Elongation, A5 : 24%
Impact energy, CV: -40°C > 47 J
Welding current: DC+; AC (OCV>70 V)
Shielding gas:
Coating Basic
Metal recovery: 120%
Redrying temperature: 400°C - 1 h
4 EWM reserves the right to change specifications without prior notice. www.ewm-group.com
SE 6013 RC Un-alloyed
Description:
• Rutile-cellulose coated stick electrode.
• Can be welded in any position including vertical-down.
• Good slag removal characteristics, medium spatter tendency.
• Very good ignition and reignition characteristics.
• Perfect for roots.
• Good, mechanical quality values
Classification:
EN ISO 2560-A:2005 E 38 0 RC 11
AWS A-5.1 E 6012
DIN 1913 E 43 22 R(C) 3
Mechanical properties:
Yield strength, Re : 360 N/mm²
Tensile Strength, Rm : 550 N/mm²
Elongation, A5 : 22%
Impact energy, CV: 0°C > 47 J
Welding current: AC; DC-
Shielding gas:
Coating Rutile-Cellulose
Metal recovery: 95%
Redrying temperature: not necessary, 120°C - 1 h, possible
www.ewm-group.com EWM reserves the right to change specifications without prior notice. 5
SE 6013 RRB Un-alloyed
Description:
• Thick rutile-basic coated stick electrode.
• Can be welded in any position except vertical-down.
• Good slag removal characteristics, medium spatter tendency.
• Very good ignition and reignition characteristics.
• Even with rusty, primed and galvanised workpieces thanks to the aggressive arc.
• Satisfactory mechanical quality values
Classification:
EN ISO 2560-A:2005 E 35 2 RB 12
AWS A-5.1 E 6013
DIN 1913 E 43 43 RR(B)7
Mechanical properties:
Yield strength, Re : 360 N/mm²
Tensile Strength, Rm : 540 N/mm²
Elongation, A5 : 24%
Impact energy, CV: -20°C > 47 J
Welding current: AC; DC-
Shielding gas:
Coating Rutile-Basic
Metal recovery: 95%
Redrying temperature: not necessary, 140°C - 1 h, possible
6 EWM reserves the right to change specifications without prior notice. www.ewm-group.com
SE 6013 RRC Un-alloyed
Description:
• Thick rutile-cellulose coated stick electrode.
• Can be welded in any position except vertical-down.
• Good slag removal characteristics, low spatter tendency.
• Very good ignition and reignition characteristics.
• Even with rusty, primed and galvanised workpieces thanks to the aggressive arc.
• Satisfactory mechanical quality values
Classification:
EN ISO 2560-A:2005 E 42 0 RC 11
AWS A-5.1 E 6013
DIN 1913 E 51 22 RR(C) 6
Approvals: TÜV, DB
Chemical C Si Mn
Mechanical properties:
Yield strength, Re : 380 N/mm²
Tensile Strength, Rm : 610 N/mm²
Elongation, A5 : 22%
Impact energy, CV: 0°C > 47 J
Welding current: AC; DC-/+
Shielding gas:
Coating Rutile-Cellulose
Metal recovery: 95%
Redrying temperature: not necessary, 140°C - 1 h, possible
www.ewm-group.com EWM reserves the right to change specifications without prior notice. 7
SE 6013 RR Un-alloyed
Description:
• Thick rutile-coated stick electrode.
• Can be welded in any position except vertical-down.
• Self-removing slag, very low spatter tendency.
• Excellent ignition and reignition characteristics.
• Very homogeneous seam finish.
• Satisfactory mechanical quality values
Classification:
EN ISO 2560-A:2005 E 42 0 RR 12
AWS A-5.1 E 6013
DIN 1913 E 51 22 RR 6
Approvals: TÜV, DB
Chemical C Si Mn
Mechanical properties:
Yield strength, Re : 420 N/mm²
Tensile Strength, Rm : 610 N/mm²
Elongation, A5 : 22%
Impact energy, CV: 0°C > 47 J
Welding current: AC; DC-
Shielding gas:
Coating Rutile
Metal recovery: 95%
Redrying temperature: not necessary, 140°C - 1 h, possible
8 EWM reserves the right to change specifications without prior notice. www.ewm-group.com
SE 8018 CrMo1 Heat resistant
Description:
• Basic coated, reduced hydrogen stick electrode.
• Can be welded in any position except vertical-down.
• Good slag removal characteristics, low spatter tendency.
• Very good ignition characteristics.
• Excellent for out-of-position welding.
• Excellent, mechanical quality values.
• Creep resistant characteristics.
Classification:
EN 1599:1997: E CrMo1 B 4 2 H5
AWS A5.5: E8018-B2
DIN 8575 E CrMo1 B 20+
Approvals: TÜV, DB
Chemical C Si Mn Cr Mo
Mechanical properties:
Yield strength, Re : 470 N/mm²
Tensile Strength, Rm : 670 N/mm²
Elongation, A5 : 20%
Impact energy, CV: 20°C > 95 J
Welding current: DC+
Shielding gas:
Coating Basic
Metal recovery: 100%
Redrying temperature: 400°C - 1 h
www.ewm-group.com EWM reserves the right to change specifications without prior notice. 9
SE 7015 Mo Heat resistant
Description:
• Basic coated, reduced hydrogen stick electrode.
• Can be welded in any position except vertical-down.
• Good slag removal characteristics, low spatter tendency.
• Very good ignition characteristics.
• Excellent for out-of-position welding.
• Excellent, mechanical quality values.
• Creep resistant and higher strength characteristics.
Classification:
EN 1599:1997: E Mo B 52
AWS A5.5: E7015-G
DIN 8575 E Mo B 26
Approvals: TÜV
Chemical C Si Mn Mo
Mechanical properties:
Yield strength, Re : 450 N/mm²
Tensile Strength, Rm : 630 N/mm²
Elongation, A5 : 22%
Impact energy, CV: -20°C > 47 J; -40°C > 47 J
Welding current: DC+
Shielding gas:
Coating Basic
Metal recovery: 100%
Redrying temperature: 400°C - 1 h
10 EWM reserves the right to change specifications without prior notice. www.ewm-group.com
SE 308 L Stainless Steel
Description:
• Rutile coated, high-alloy stick electrode.
• Can be welded in any position except vertical-down.
• Self-removing slag, very low spatter tendency.
• Excellent ignition and reignition characteristics.
• Very homogeneous seam finish.
• Can be used for welding stabilised Cr-Ni steels.
• Cold tough up to 196 °C
Classification:
EN ISO 14343-A:2007: E 19 9 L R 12
AWS A5.4: E 308 L -16
DIN 8556 E 19 9 LR(B) 23
W 1.4316
Materials: 1.4300, 1.4301, 1.4303, 1.4306, 1.4308, 1.4311, 1.4312,
1.4371, 1.4541, 1.4543, 1.4552
Approvals: TÜV, DB
Chemical C Cr Ni
Mechanical properties:
Yield strength, Re : 320 N/mm²
Tensile Strength, Rm : 550 N/mm²
Elongation, A5 : 35%
Impact energy, CV: 20°C > 70 J
Welding current: DC+; AC
Shielding gas:
Coating Rutile
Metal recovery:
Redrying temperature: selten nötig, 300°C - 2 h
www.ewm-group.com EWM reserves the right to change specifications without prior notice. 11
SE 309 MoL Stainless Steel
Description:
• Rutile coated, high-alloy stick electrode.
• Can be welded in any position except vertical-down.
• Self-removing slag, very low spatter tendency.
• Excellent ignition and reignition characteristics.
• Very homogeneous seam finish.
• Suitable for dissimilar joints.
• Maximum operating temperature 300 °C
Classification:
EN 1600:1997: E 23 12 2 L R 32
AWS A5.4: E 309 Mo - 26
DIN 8556 E 23 12 2 LR(B) 23
W 1.4459
Materials: 1.4401, 1.4404, 1.4406, 1.4410, 1.4437, 1.5471, 1.4580
Approvals: TÜV, DB
Chemical C Cr Ni Mo
Mechanical properties:
Yield strength, Re : 460 N/mm²
Tensile Strength, Rm : 650 N/mm²
Elongation, A5 : 30%
Impact energy, CV: 20°C > 55 J
Welding current: DC+; AC
Shielding gas:
Coating Rutile
Metal recovery:
Redrying temperature: selten nötig, 300°C - 2 h
12 EWM reserves the right to change specifications without prior notice. www.ewm-group.com
SE 312 Stainless Steel
Description:
• Rutile coated, high-alloy stick electrode.
• Can be welded in any position except vertical-down.
• Self-removing slag, very low spatter tendency.
• Excellent ignition and reignition characteristics.
• Very homogeneous seam finish.
• Suitable for dissimilar joints. (Austenite-ferrite), buffer layers.
• Scale resistant up to 1100 °C
Classification:
EN 1600:1997: E 29 9 R 32
AWS A5.4: E 312 - 16
DIN 8556 E 29 9 R(B) 23
W 1.4337
Materials: For problem steels with high strength, joining of dissimi-
lar steels, tool steels, heat treatable
or tempered and quenched steels, spring steels, high
carbon steels etc.
Approvals: TÜV, DB
Chemical C Cr Ni
Mechanical properties:
Yield strength, Re : 500 N/mm²
Tensile Strength, Rm : 750 N/mm²
Elongation, A5 : 20%
Impact energy, CV: 20°C > 25 J
Welding current: DC+; AC
Shielding gas:
Coating Rutile
Metal recovery:
Redrying temperature: selten nötig, 300°C - 2 h
Description:
• Rutile coated, high-alloy stick electrode.
• Can be welded in any position except vertical-down.
• Self-removing slag, very low spatter tendency.
• Excellent ignition and reignition characteristics.
• Very homogeneous seam finish.
• Can be used for stabilised and non-stabilised Cr-Ni steels.
• Maximum operating temperature 400 °C
Classification:
EN 1600:1997: E 19 12 3 L R 12
AWS A5.4: E 316 L - 16
DIN 8556 E 19 12 3 LR 23
W 1.4430
Materials: 1. 4401, 1.4404, 1.4406, 1.4408, 1.4420, 1.4435,
1.4436, 1.4571, 1.4573, 1.4580, 1.4581, 1.4583
Approvals: TÜV, DB
Chemical C Cr Ni Mo
Mechanical properties:
Yield strength, Re : 320 N/mm²
Tensile Strength, Rm : 550 N/mm²
Elongation, A5 : 35%
Impact energy, CV: 20°C > 70 J
Welding current: DC+; AC
Shielding gas:
Coating Rutile
Metal recovery:
Redrying temperature: selten nötig, 300°C - 2 h
Description:
• Rutile coated, high-alloy stick electrode.
• Can be welded in any position except vertical-down.
• Self-removing slag, very low spatter tendency.
• Excellent ignition and reignition characteristics.
• Very homogeneous seam finish.
• Can be used for welding stabilised Cr-Ni steels.
• Maximum operating temperature 400 °C
Classification:
EN 1600:1997: E 19 12 3 Nb R 12
AWS A5.4: E 318 - 16
DIN 8556 E 19 12 3 Nb R(B) 23
W 1.4576
Materials: 1.4571, 1.4573, 1.4580, 1.4581, 1.4583, 1.4401, 1.4404,
1.4408, 1.4420, 1.4435, 1.4436
Approvals: TÜV, DB
Chemical C Cr Ni Mo Nb
Mechanical properties:
Yield strength, Re : 400 N/mm²
Tensile Strength, Rm : 620 N/mm²
Elongation, A5 : 35%
Impact energy, CV: 20°C > 60 J
Welding current: DC+; AC
Shielding gas:
Coating Rutile
Metal recovery:
Redrying temperature: selten nötig, 300°C - 2 h
Description:
• Low-alloy MAG solid wire electrode.
• Copper-plated, layer wound.
• For industry, trade and repair shops.
• Low-spatter thanks to high level of chemical purity.
• Approved for EWM forceArc and coldArc.
Classification:
EN ISO 14341-A G 42 3M G3Si1
AWS A5.18: ER 70S-6
Mechanical properties:
Yield strength, Re : 430 N/mm²
Tensile Strength, Rm : 540 N/mm²
Elongation, A5 : 28%
Impact energy, CV: -29°C > 70 J; -20°C > 52 J
Welding current: DC+
Shielding gas: 100% CO₂, Ar + 8 - 20% CO₂ - C1, M21
Metal recovery:
16 EWM reserves the right to change specifications without prior notice. www.ewm-group.com
SW 70S G4 Un-alloyed
Description:
• Low-alloy MAG solid wire electrode.
• Copper-plated, layer wound.
• For industry, trade and repair shops.
• Low-spatter thanks to high level of chemical purity.
• Approved for EWM forceArc and coldArc.
Classification:
EN ISO 14341-A G 42 2C G4Si1, G 46 4M G4Si1
AWS A5.18: ER 70 S - 6
Approvals: TÜV, DB
Chemical C Si Mn P S
Mechanical properties:
Yield strength, Re : 461 N/mm² , 524 N/mm² (Co₂)
Tensile Strength, Rm : 560 N/mm²617
Elongation, A5 : 29%, 27%
Impact energy, CV: -20°C > 95 J; -30°C > 55 J
Welding current: DC+
Shielding gas: 100% CO₂, Ar + 8 - 20% CO₂ - C1, M21
Metal recovery:
www.ewm-group.com EWM reserves the right to change specifications without prior notice. 17
SW 100S NiMoCr High tensile
Description:
• Medium-alloy MAG solid wire electrode.
• Copper-plated, layer wound.
• High-strength welding filler material for vehicle and crane construction
• Low-spatter thanks to high level of chemical purity.
• Approved for EWM forceArc.
• For steels with a yield point of up to 690 n/mm.
Classification:
EN ISO 16834-A:2007: G 69 4 Mn 3 Ni1Cr Mo
AWS A5.28: ER 100 S - G
Approvals: TÜV, DB
Chemical C Si Mn Cr Ni Mo V
Mechanical properties:
Yield strength, Re : 690 N/mm²
Tensile Strength, Rm : 796 N/mm²
Elongation, A5 : 16%
Impact energy, CV: 20°C > 80 J; -40°C > 47 J
Welding current: DC+
Shielding gas: 100% CO₂, Ar + 8 - 20% CO₂ - C1, M21
Metal recovery:
Redrying temperature:
18 EWM reserves the right to change specifications without prior notice. www.ewm-group.com
SW 80S CrMo1 Heat resistant
Description:
• Medium-alloy MAG solid wire electrode.
• Copper-plated, layer wound.
• Creep resistant filler for pipe and container construction.
• Low-spatter thanks to high level of chemical purity.
• Approved for EWM coldArc.
• Maximum operating temperature 550 °C.
• Bruscato factor max. 15 ppm.
Classification:
EN 12070:1999: G CrMo 1 Si
AWS A5.28: ER 80 S - B 2
W 1.7339
Materials: 13CrMo4-5
Approvals: TÜV, DB
Chemical C Si Mn Cr Mo
Mechanical properties:
Yield strength, Re : 305 N/mm²
Tensile Strength, Rm : 450 N/mm²
Elongation, A5 : 20%
Impact energy, CV: 20°C > 100 J; -10°C > 47 J
Welding current: DC+
Shielding gas: 100% CO₂, Ar + 8 - 20% CO₂ - C1, M21
Metal recovery:
Redrying temperature:
www.ewm-group.com EWM reserves the right to change specifications without prior notice. 19
SW 80S Mo Heat resistant
Description:
• Medium-alloy MAG solid wire electrode.
• Copper-plated, layer wound.
• Creep resistant filler for pipe and container construction.
• Low-spatter thanks to high level of chemical purity.
• Approved for EWM coldArc.
• Maximum operating temperature 500 °C.
Classification:
EN 12070:1999: G Mo Si
AWS A5.28: ER 80 S - G
W 1.5424
Approvals: TÜV, DB
Chemical C Si Mn Mo
Mechanical properties:
Yield strength, Re : 460 N/mm²
Tensile Strength, Rm : 560 N/mm²
Elongation, A5 : 22%
Impact energy, CV: 20°C > 60 J; -20°C > 47 J
Welding current: DC+
Shielding gas: 100% CO₂, Ar + 8 - 20% CO₂ - C1, M21
Metal recovery:
Redrying temperature:
20 EWM reserves the right to change specifications without prior notice. www.ewm-group.com
SW Hard 600 Hardfacing
Description:
• High-alloy MAG solid wire electrode for hard coatings.
• Copper-plated, layer wound.
• For impact loading and mineral abrasion.
• High chromium content - good with aggressive media.
• Up to 60 HRC.
Classification:
W 1.4718
Approvals:
Chemical C Si Cr
Mechanical properties:
Yield strength, Re :
Tensile Strength, Rm :
Elongation, A5 :
Impact energy, CV:
Welding current:
Shielding gas: 100% CO₂, Ar + 8 - 20% CO₂ - C1, M21
Metal recovery:
Redrying temperature:
www.ewm-group.com EWM reserves the right to change specifications without prior notice. 21
SW 307 Si Stainless Steel
Description:
• High-alloy MAG solid wire electrode.
• Annealed and layer wound.
• Excellent welding characteristics thanks to high Si content
• Suitable for dissimilar joints. (Austenite-ferrite), buffer layers.
• Strain-hardening.
Classification:
EN ISO 14343-A:2007: G 18 8 Mn
AWS 5.9: ER 307 L
W 1.4370
Approvals:
Chemical C Si Mn Cr Ni
Mechanical properties:
Yield strength, Re : 380 N/mm²
Tensile Strength, Rm : 600 N/mm²
Elongation, A5 : 40%
Impact energy, CV: 20°C > 100 J
Welding current: DC+
Shielding gas: Ar + 2% CO₂, Ar + 1 - 3% O₂ - M12, M13
Metal recovery:
Redrying temperature:
22 EWM reserves the right to change specifications without prior notice. www.ewm-group.com
SW 308 LSi Stainless Steel
Description:
• High-alloy MAG solid wire electrode.
• Annealed and layer wound.
• Excellent welding characteristics thanks to high Si content
• For non-rusting Cr-Ni steels with low C content.
• Can be used for stabilised and non-stabilised Cr-Ni steels.
• Maximum operating temperature 350 °C
Classification:
EN ISO 14343-A:2007: G 19 9 L Si
AWS 5.9: ER 308 L Si
W 1.4316
Approvals: TÜV, DB
Chemical C Si Mn Cr Ni
Mechanical properties:
Yield strength, Re : 400 N/mm²
Tensile Strength, Rm : 590 N/mm²
Elongation, A5 : 40%
Impact energy, CV: -196°C > 50 J
Welding current: DC+
Shielding gas: Ar + 2% CO₂, Ar + 1 - 3% O₂ - M12, M13
Metal recovery:
Redrying temperature:
Description:
• High-alloy MAG solid wire electrode.
• Annealed and layer wound.
• Excellent welding characteristics thanks to high Si content
• Suitable for dissimilar joints. (Austenite-ferrite), buffer layers.
• Maximum operating temperature 300 °C
Classification:
EN ISO 14343-A:2007: G 23 12 L Si
AWS 5.9: ER 309 L Si
W 1.4332
Approvals: TÜV
Chemical C Si Mn Cr Ni
Mechanical properties:
Yield strength, Re : 450 N/mm²
Tensile Strength, Rm : 650 N/mm²
Elongation, A5 : 35%
Impact energy, CV: -120°C > 60 J
Welding current: DC+
Shielding gas: Ar + 2% CO₂, Ar + 1 - 3% O₂ - M12, M13
Metal recovery:
Redrying temperature:
24 EWM reserves the right to change specifications without prior notice. www.ewm-group.com
SW 316 LSi Stainless Steel
Description:
• High-alloy MAG solid wire electrode.
• Annealed and layer wound.
• Excellent welding characteristics thanks to high Si content
• For non-rusting Cr-Ni steels with low C content.
• Can be used for stabilised and non-stabilised Cr-Ni steels.
• Maximum operating temperature 400 °C
Classification:
EN ISO 14343-A:2007: G 19 12 3 L Si
AWS 5.9: ER 316 L Si
W 1.4430
Approvals: TÜV, DB
Chemical C Si Mn Cr Mo
Mechanical properties:
Yield strength, Re : 400 N/mm²
Tensile Strength, Rm : 600 N/mm²
Elongation, A5 : 40%
Impact energy, CV: -196°C > 50 J
Welding current: DC+
Shielding gas: Ar + 2% CO₂, Ar + 1 - 3% O₂ - M12, M13
Metal recovery:
Redrying temperature:
Description:
• High-alloy MAG solid wire electrode.
• Annealed and layer wound.
• Excellent welding characteristics thanks to high Si content
• Can be used for welding stabilised Cr-Ni steels.
• Maximum operating temperature 400 °C
Classification:
EN ISO 14343-A:2007: G 19 12 3 Nb Si
AWS 5.9: ER 318 Si
W 1.4576
Approvals: TÜV, DB
Chemical C Si Mn Cr Mo Nb
Mechanical properties:
Yield strength, Re : 400 N/mm²
Tensile Strength, Rm : 610 N/mm²
Elongation, A5 : 34%
Impact energy, CV: -120°C > 40 J
Welding current: DC+
Shielding gas: Ar + 2% CO₂, Ar + 1 - 3% O₂ - M12, M13
Metal recovery:
Redrying temperature:
26 EWM reserves the right to change specifications without prior notice. www.ewm-group.com
SW 5754 Mg3 Aluminium
Description:
• MIG solid wire electrode, aluminium.
• Double-shell quality.
• 3% magnesium
• Medium strength and corrosion resistance.
• Suitable for subsequent anodisation.
Classification:
EN ISO 18273 S AL 5754
AWS 5.10: ER 5754
W 3.3536
Mechanical properties:
Yield strength, Re : 80 N/mm²
Tensile Strength, Rm : 190 N/mm²
Elongation, A5 : 20%
Impact energy, CV:
Welding current: DC+
Shielding gas: Ar, Ar + 30% He - I1, I3
Metal recovery:
Redrying temperature:
Melting range: 615 to 642
Hydrogen cont. / 100g weld metal
Hardness as welded:
Wire-Ø Spool-Ø Item-No. Packing Units
1,0 mm 300 mm 097-003481-30010 Spool 7,5 kg
1,2 mm 300 mm 097-003481-30012 Spool 7,5 kg
We can deliver in all diameters and pack forms e.g small spools, large spools and drums, on request.
www.ewm-group.com EWM reserves the right to change specifications without prior notice. 27
SW 5183 Mg4,5 Aluminium
Mn
Description:
• MIG solid wire electrode, aluminium.
• Double-shell quality.
• 4.5% magnesium, 0.7% manganese.
• High strength and high corrosion resistance, seawater resistant.
• Suitable for subsequent anodisation.
Classification:
EN ISO 18273 S AL 5183
AWS 5.10: ER 5183
W 3.3548
Mechanical properties:
Yield strength, Re : 125 N/mm²
Tensile Strength, Rm : 275 N/mm²
Elongation, A5 : 17%
Impact energy, CV:
Welding current: DC+
Shielding gas: Ar, Ar + 30% He - I1, I3
Metal recovery:
Redrying temperature:
Melting range: 574 to 638
Hydrogen cont. / 100g weld metal
Hardness as welded:
Wire-Ø Spool-Ø Item-No. Packing Units
1,0 mm 300 mm 097-003482-30010 Spool 7,5 kg
1,2 mm 300 mm 097-003482-30012 Spool 7,5 kg
1,6 mm 300 mm 097-003482-30016 Spool 7,5 kg
We can deliver in all diameters and pack forms e.g small spools, large spools and drums, on request.
28 EWM reserves the right to change specifications without prior notice. www.ewm-group.com
SW 5356 Mg5 Aluminium
Description:
• MIG solid wire electrode, aluminium.
• Double-shell quality.
• 5% magnesium
• High strength and high corrosion resistance, seawater resistant.
• Suitable for subsequent anodisation.
Classification:
EN ISO 18273 S AL 5356
AWS 5.10: ER 5356
W 3.3556
Mechanical properties:
Yield strength, Re : 120 N/mm²
Tensile Strength, Rm : 250 N/mm²
Elongation, A5 : 8%
Impact energy, CV:
Welding current: DC+
Shielding gas: Ar, Ar + 30% He - I1, I3
Metal recovery:
Redrying temperature:
Melting range: 575 to 633
Hydrogen cont. / 100g weld metal
Hardness as welded:
Wire-Ø Spool-Ø Item-No. Packing Units
0,8 mm 200 mm 097-003483-20008 Spool 2 kg
1,0 mm 200 mm 097-003483-20010 Spool 2 kg
1,0 mm 300 mm 097-003483-30010 Spool 7,5 kg
1,2 mm 300 mm 097-003483-30012 Spool 7,5 kg
1,6 mm 300 mm 097-003483-30016 Spool 7,5 kg
We can deliver in all diameters and pack forms e.g small spools, large spools and drums, on request.
www.ewm-group.com EWM reserves the right to change specifications without prior notice. 29
SW 4043 Si5 Aluminium
Description:
• MIG solid wire electrode, aluminium.
• Double-shell quality.
• 5% silicon
• Untreated low strength values.
• Not suitable for subsequent anodisation.
• Main areas of use are welds on cast aluminium.
Classification:
EN ISO 18273 S AL 4043A
AWS 5.10: ER 4043
W 3.2245
Mechanical properties:
Yield strength, Re : 40 N/mm²
Tensile Strength, Rm : 120 N/mm²
Elongation, A5 : 8%
Impact energy, CV:
Welding current:
Shielding gas: Ar, Ar + 30% He - I1, I3
Metal recovery:
Redrying temperature:
Melting range: 573 to 625
Hydrogen cont. / 100g weld metal
Hardness as welded:
Wire-Ø Spool-Ø Item-No. Packing Units
1,0 mm 300 mm 097-003484-30010 Spool 7,5 kg
1,2 mm 300 mm 097-003484-30012 Spool 7,5 kg
We can deliver in all diameters and pack forms e.g small spools, large spools and drums, on request.
30 EWM reserves the right to change specifications without prior notice. www.ewm-group.com
SW CuSi3 Copper
Description:
• Copper-based, MIG/MAG solid wire electrode
• Low interference due to observation of the smallest dimensional tolerances, layer wound.
• Joint welding of Cu materials and various steel sheets.
• GMA-surfacing on steel.
• Resistant to high temperatures and corrosion.
• Pulse arc recommended, approved for coldArc.
Classification:
EN 14640 CuSi3Mn1 Cu6560
AWS 5.7: ERCuSi-A
W 2.1461
Approvals:
Chemical Al Si Mn Sn Zn Pb Fe P
composition, wt.% 0,01 4,00 1,50 0,20 0,20 0,02 0,50 0,02
Mechanical properties:
Yield strength, Re :
Tensile Strength, Rm : 370 N/mm²
Elongation, A5 : 40%
Impact energy, CV:
Welding current: DC+
Shielding gas: Ar, Ar + 30% He - I1, I3
Metal recovery:
Redrying temperature:
Solidus: 910
Liquidus 1025
Hardness as welded: 80 HB - 90 HB
Wire-Ø Spool-Ø Item-No. Packing Units
0,8 mm 200 mm 097-003485-20008 Spool 5 kg
1,0 mm 200 mm 097-003485-20010 Spool 5 kg
0,8 mm 300 mm 097-003485-30008 Spool 15 kg
1,0 mm 300 mm 097-003485-30010 Spool 15 kg
1,0 mm 097-003485-25010 Drum 250 kg
We can deliver in all diameters and pack forms e.g small spools, large spools and drums, on request.
www.ewm-group.com EWM reserves the right to change specifications without prior notice. 31
SW CuAl8 Copper
Description:
• Copper-based, MIG/MAG solid wire electrode
• Low interference due to observation of the smallest dimensional tolerances, layer wound.
• Joint welding of Cu materials and various steel sheets.
• Wear-resistant GMA-surfacing on steel.
• Resistant to high temperatures and corrosion. Seawater resistant
• Pulse arc recommended, approved for coldArc.
Classification:
EN 14640 CuAl8
AWS 5.7: ER Cu Al - A1
W 2.0921
Approvals:
Chemical Al Si Mn Ni Zn Pb Fe
Mechanical properties:
Yield strength, Re :
Tensile Strength, Rm : 450 N/mm²
Elongation, A5 : 45%
Impact energy, CV:
Welding current: DC+
Shielding gas: Ar, Ar + 30% He - I1, I3
Metal recovery:
Redrying temperature:
Solidus: 1030
Liquidus 1040
32 EWM reserves the right to change specifications without prior notice. www.ewm-group.com
FCW 71T Basic Un-alloyed
Description:
• Low-alloy, basic MAG cored wire electrode.
• Bright, layer wound.
• Very strong and highly resistant to cracking.
• Ideal for thick metal sheets and rigidly clamped constructions
• Hydrogen content < 5% in the welding material.
Classification:
DIN EN ISO 17632-A T 42 2 B M 1 H5
AWS A5.20: E 71 T - 5 M-J
JIS Z3313 YFW-A502B
Mechanical properties:
Yield strength, Re : 480 N/mm²
Tensile Strength, Rm : 570 N/mm²
Elongation, A5 : 30%
Impact energy, CV: -40°C > 95 J
Welding current: DC-
Shielding gas: 100% CO₂, Ar + 8 - 20% CO₂ - C1, M21
Charge Basic
Metal recovery: 86%
Redrying temperature:
www.ewm-group.com EWM reserves the right to change specifications without prior notice. 33
FCW 70TC Metal Un-alloyed
Description:
• Low-alloy, metal powder MAG cored wire electrode.
• Bright, layer wound.
• Excellent fissure bridging and edge formation.
• Notch-free seam transitions.
• Very high current carrying capacity and yield.
Classification:
DIN EN ISO 17632-A T 42 2 M M/C 1 H5
AWS A5.18: E 70C - 6 M/ -6 C
JIS Z3313 YFW-C50DM
Mechanical properties:
Yield strength, Re : 480 N/mm²
Tensile Strength, Rm : 560 N/mm²
Elongation, A5 : 31%
Impact energy, CV: -29°C > 62 J
Welding current: DC+
Shielding gas: 100% CO₂, Ar + 8 - 20% CO₂ - C1, M21
Charge Metal-Powder
Metal recovery: 96%
Redrying temperature:
34 EWM reserves the right to change specifications without prior notice. www.ewm-group.com
FCW 71T Rutile Un-alloyed
Description:
• Low-alloy, rutile, MAG cored wire electrode.
• Bright, layer wound.
• Welding is possible in any position with one machine setting.
• Very easy handling and controllability.
• Preferred application on pipe and steel constructions, in Ship construction, on ceramic
Classification:
DIN EN ISO 17632-A T 42 2 P M 1 H5
AWS A5.20: E 71 T -1M
JIS Z3313 YFW-A50DR
Mechanical properties:
Yield strength, Re : 510 N/mm²
Tensile Strength, Rm : 570 N/mm²
Elongation, A5 : 30%
Impact energy, CV: -18°C > 110 J
Welding current: DC+
Shielding gas: 100% CO₂, Ar + 8 - 20% CO₂ - C1, M21
Charge Rutile
Metal recovery: 88%
Redrying temperature:
www.ewm-group.com EWM reserves the right to change specifications without prior notice. 35
FCW 71T Un-alloyed
Selfshield
Description:
• Low-alloy, self-shielding cored wire electrode.
• Bright, layer wound.
• Can be welded in any position, including vertical down.
• Very easy handling and controllability.
• High current carrying capacity and low spatter.
• Reduced barium proportion. Observe safety information.
Classification:
AWS A5.20: E71T-11
JIS YFW S50GB
Approvals: TÜV, DB
Chemical C Si Mn P S Al
Mechanical properties:
Yield strength, Re : 520 N/mm²
Tensile Strength, Rm : 590 N/mm²
Elongation, A5 : 21%
Impact energy, CV:
Welding current: DC-
Shielding gas: 100% CO₂, Ar + 8 - 20% CO₂ - C1, M21
Metal recovery:
Redrying temperature:
Description:
• High-alloy, rutile MAG cored wire electrode.
• Excellent weldability, low spatter formation.
• Slag is removed very easily.
• For dissimilar joints and buffer layers.
• Operating temperature with mixed joints 300 °C.
Classification:
EN ISO 17633-A:2006: T 23 12 L R C/M 3
AWS A5.22: E 309 LT0-1/4
JIS Z3323 YF309LC
W 1.4430
Materials: Joints between stainless and mild or medium carbon
steels.
composition, wt.% 0,028 0,61 1,24 0,019 0,01 12,58 24,17 0,05 0,03
Mechanical properties:
Yield strength, Re : 450 N/mm²
Tensile Strength, Rm : 580 N/mm²
Elongation, A5 : 33%
Impact energy, CV:
Welding current: DC+
Shielding gas: 100% CO₂, Ar + 8 - 20% CO₂ - C1, M21
Charge Rutile
Metal recovery: 86%
Redrying temperature:
www.ewm-group.com EWM reserves the right to change specifications without prior notice. 37
FCW 316 Rutile Stainless Steel
Description:
• High-alloy, rutile MAG cored wire electrode.
• Excellent weldability, low spatter formation.
• Slag is removed very easily.
• For non-rusting Cr-Ni-Mo steels with low carbon content.
• Operating temperature up to 400 °C.
Classification:
EN ISO 17633-A:2006: T 19 12 3 L R C/M 3
AWS A5.22: E 316 LT0-1/4
JIS Z3323 YF316LC
W 1.4430
Materials: 1.4401, 1.4404, 1.4406, 1.4408, 1.4429, 1.4435, 1.4436,
1.4571, 1.4580, 1.4581, 1.4583
composition, wt.% 0,026 0,59 1,43 0,02 0,01 12,02 18,95 2,54 0,06
Mechanical properties:
Yield strength, Re : 380 N/mm²
Tensile Strength, Rm : 540 N/mm²
Elongation, A5 : 41%
Impact energy, CV: 0°C > 44 J
Welding current: DC+
Shielding gas: 100% CO₂, Ar + 8 - 20% CO₂ - C1, M21
Charge Rutile
Metal recovery: 86%
Redrying temperature:
38 EWM reserves the right to change specifications without prior notice. www.ewm-group.com
GFR R60 Un-alloyed
Description:
• Low-alloy oxyacetylene welding rod.
• Copper-plated and stamped.
• Semifluid molten pool, good controllability.
• Recommended for seal welds.
Classification:
EN 12536 O III
AWS A5.2: R60
W 1.6215
Approvals: TÜV, DB
Chemical C Si Mn Ni
Mechanical properties:
Yield strength, Re : 310 N/mm²
Tensile Strength, Rm : 400 N/mm²
Elongation, A5 : 22%
Impact energy, CV: 20°C > 50 J
Welding current:
Shielding gas: Acetylen / O₂
Metal recovery:
Redrying temperature:
www.ewm-group.com EWM reserves the right to change specifications without prior notice. 39
TR 70S G3 Un-alloyed
Description:
• Low-alloy, TIG welding rod.
• Copper-plated and stamped.
• Semifluid molten pool, good controllability.
Classification:
EN ISO 636-A W 46 2 W 3 Si 1
AWS A5.18: ER 70 S - 6
W 1.5125
Approvals: TÜV, DB
Chemical C Si Mn
Mechanical properties:
Yield strength, Re : 450 N/mm²
Tensile Strength, Rm : 550 N/mm²
Elongation, A5 : 22%
Impact energy, CV: 20°C > 100 J; -50°C > 47 J
Welding current: DC-
Shielding gas: Ar, Ar + 2% H - I1, R1
Metal recovery:
Redrying temperature:
40 EWM reserves the right to change specifications without prior notice. www.ewm-group.com
TR 307 Si Stainless Steel
Description:
• High-alloy TIG welding rod.
• Stamped.
• Excellent welding characteristics thanks to high Si content
• Suitable for dissimilar joints. (Austenite-ferrite), buffer layers.
• Strain-hardening.
Classification:
EN 1600:1997: W 18 8 Mn Si
AWS 5.9: ER 307 Si
W 1.4370
Mechanical properties:
Yield strength, Re : 450 N/mm²
Tensile Strength, Rm : 650 N/mm²
Elongation, A5 : 42%
Impact energy, CV: -80°C > 60 J
Welding current: DC-
Shielding gas: Ar, Ar + 2% H - I1, R1
Metal recovery:
Redrying temperature:
www.ewm-group.com EWM reserves the right to change specifications without prior notice. 41
TR 308 LSi Stainless Steel
Description:
• High-alloy TIG welding rod.
• Stamped.
• Excellent welding characteristics thanks to high Si content
• For non-rusting Cr-Ni steels with low C content.
• Maximum operating temperature 350 °C
Classification:
EN ISO 14343-A:2007: W 19 9 L Si
AWS 5.9: ER 308 L Si
W 1.4316
Approvals: TÜV, DB
Chemical C Si Mn Cr Ni
Mechanical properties:
Yield strength, Re : 400 N/mm²
Tensile Strength, Rm : 590 N/mm²
Elongation, A5 : 40%
Impact energy, CV: -196°C > 50 J
Welding current: DC-
Shielding gas: Ar, Ar + 2% H - I1, R1
Metal recovery:
Redrying temperature:
Description:
• High-alloy TIG welding rod.
• Stamped.
• Excellent welding characteristics thanks to high Si content
• For non-rusting Cr-Ni steels with low C content.
• Maximum operating temperature 400 °C
Classification:
EN ISO 14343-A:2007: W 19 12 3 L Si
AWS 5.9: ER 316 L Si
W 1.4430
Approvals: TÜV, DB
Chemical C Si Mn Cr Mo Ni
Mechanical properties:
Yield strength, Re : 400 N/mm²
Tensile Strength, Rm : 600 N/mm²
Elongation, A5 : 40%
Impact energy, CV: -196°C > 50 J
Welding current: DC-
Shielding gas: Ar, Ar + 2% H - I1, R1
Metal recovery:
Redrying temperature:
Description:
• High-alloy TIG welding rod.
• Stamped.
• Excellent welding characteristics thanks to high Si content
• Can be used for welding stabilised Cr-Ni steels.
• Maximum operating temperature 400 °C
Classification:
EN ISO 14343-A:2007: W 19 12 3 Nb Si
AWS 5.9: ER 318 Si
W 1.4576
Approvals: TÜV, DB
Chemical C Si Mn Cr Mo Ni Nb
Mechanical properties:
Yield strength, Re : 400 N/mm²
Tensile Strength, Rm : 610 N/mm²
Elongation, A5 : 34%
Impact energy, CV: -120°C > 40 J
Welding current: DC-
Shielding gas: Ar, Ar + 2% H - I1, R1
Metal recovery:
Redrying temperature:
Description:
• High-alloy TIG welding rod.
• Stamped.
• For ferrite-austenite chromium-nickel-molybdenum steel.
• Use in offshore technology, e.g. in pipe construction.
• Resistant to products containing chloride and acid gases.
• Maximum operating temperature 250 °C
Classification:
EN ISO 14343-A:2007: W 22 9 3 N L
AWS 5.9: ER 2209
W 1.4462
Approvals: TÜV
Chemical C Si Mn Cr Mo Ni N
Mechanical properties:
Yield strength, Re : 620 N/mm²
Tensile Strength, Rm : 800 N/mm²
Elongation, A5 : 30%
Impact energy, CV: -60°C > 85 J
Welding current: DC-
Shielding gas: Ar - I1
Metal recovery:
Redrying temperature:
www.ewm-group.com EWM reserves the right to change specifications without prior notice. 45
TR 80S Mo Heat resistant
Description:
• Medium-alloy, TIG welding rod.
• Copper-plated and stamped.
• Creep resistant filler for pipe and container construction.
• Maximum operating temperature 500 °C.
Classification:
EN 12070:1999: W Mo Si
AWS A5.28: ER 80 S - G
W 1.5424
Approvals: TÜV, DB
Chemical C Si Mn Mo
Mechanical properties:
Yield strength, Re : 460 N/mm²
Tensile Strength, Rm : 560 N/mm²
Elongation, A5 : 22%
Impact energy, CV: 20°C > 60 J; -20°C > 47 J
Welding current: DC-
Shielding gas: Ar, Ar + 2% H - I1, R1
Metal recovery:
Redrying temperature:
46 EWM reserves the right to change specifications without prior notice. www.ewm-group.com
TR 80S CrMo1 Heat resistant
Description:
• Medium-alloy, TIG welding rod.
• Copper-plated and stamped.
• Creep resistant filler for pipe and container construction.
• Maximum operating temperature 550 °C.
Classification:
EN 12070:1999: W CrMo 1 Si
AWS A5.28: ER 80 S - B 2
W 1.7339
Materials: 13CrMo4-5
Approvals: TÜV, DB
Chemical C Si Mn Mo Cr
Mechanical properties:
Yield strength, Re : 305 N/mm²
Tensile Strength, Rm : 450 N/mm²
Elongation, A5 : 22%
Impact energy, CV: 20°C > 100 J; -10°C > 47 J
Welding current: DC-
Shielding gas: Ar, Ar + 2% H - I1, R1
Metal recovery:
Redrying temperature:
www.ewm-group.com EWM reserves the right to change specifications without prior notice. 47
TR 5754 Mg3 Aluminium
Description:
• TIG welding rod, aluminium
• Double-shell quality.
• 3% magnesium
• Medium strength and corrosion resistance.
• Suitable for subsequent anodisation.
Classification:
EN ISO 18273 S AL 5754
AWS 5.10: ER 5754
W 3.3536
Mechanical properties:
Yield strength, Re : 80 N/mm²
Tensile Strength, Rm : 190 N/mm²
Elongation, A5 : 20%
Impact energy, CV:
Welding current: AC
Shielding gas: Ar, Ar + 30% He - I1, I3
Metal recovery:
Redrying temperature:
Melting range: 615 to 642
Hydrogen cont. / 100g weld metal
Hardness as welded:
Wire-Ø Length Item-No. Packing Units
2,0 mm 1000 mm 097-003494-10020 Package 2,5 kg Covering Box 10.00 kg
2,4 mm 1000 mm 097-003494-10024 Package 2,5 kg Covering Box 10.00 kg
3,2 mm 1000 mm 097-003494-10032 Package 2,5 kg Covering Box 10.00 kg
We can deliver in all diameters and pack forms e.g plastic slide boxes on request.
48 EWM reserves the right to change specifications without prior notice. www.ewm-group.com
TR 5183 Mg4,5 Mn Aluminium
Description:
• TIG welding rod, aluminium
• Double-shell quality.
• 4.5% magnesium, 0.7% manganese.
• High strength and high corrosion resistance, seawater resistant.
• Suitable for subsequent anodisation.
Classification:
EN ISO 18273 S AL 5183
AWS 5.10: ER 5183
W 3.3548
Mechanical properties:
Yield strength, Re : 125 N/mm²
Tensile Strength, Rm : 275 N/mm²
Elongation, A5 : 17%
Impact energy, CV:
Welding current: AC
Shielding gas: Ar, Ar + 30% He - I1, I3
Metal recovery:
Redrying temperature:
Melting range: 574 to 638
Hydrogen cont. / 100g weld metal
Hardness as welded:
Wire-Ø Length Item-No. Packing Units
2,4 mm 1000 mm 097-003495-10024 Package 2,5 kg Covering Box 10.00 kg
2,0 mm 1000 mm 097-003495-10020 Package 2,5 kg Covering Box 10.00 kg
3,2 mm 1000 mm 097-003495-10032 Package 2,5 kg Covering Box 10.00 kg
We can deliver in all diameters and pack forms e.g plastic slide boxes on request.
www.ewm-group.com EWM reserves the right to change specifications without prior notice. 49
TR 5356 Mg5 Aluminium
Description:
• TIG welding rod, aluminium
• Double-shell quality.
• 5% magnesium
• High strength and high corrosion resistance, seawater resistant.
• Suitable for subsequent anodisation.
Classification:
EN ISO 18273 S AL 5356
AWS 5.10: ER 5356
W 3.3556
Mechanical properties:
Yield strength, Re : 120 N/mm²
Tensile Strength, Rm : 250 N/mm²
Elongation, A5 : 8%
Impact energy, CV:
Welding current: AC
Shielding gas: Ar, Ar + 30% He - I1, I3
Metal recovery:
Redrying temperature:
Melting range: 575 to 633
Hydrogen cont. / 100g weld metal
Hardness as welded:
Wire-Ø Length Item-No. Packing Units
2,0 mm 1000 mm 097-003496-10020 Package 2,5 kg Covering Box 10.00 kg
2,4 mm 1000 mm 097-003496-10024 Package 2,5 kg Covering Box 10.00 kg
3,2 mm 1000 mm 097-003496-10032 Package 2,5 kg Covering Box 10.00 kg
We can deliver in all diameters and pack forms e.g plastic slide boxes on request.
50 EWM reserves the right to change specifications without prior notice. www.ewm-group.com
TR 4043 Si5 Aluminium
Description:
• TIG welding rod, aluminium
• Double-shell quality.
• 5% magnesium
• Untreated low strength values.
• Not suitable for subsequent anodisation.
Classification:
EN ISO 18273 S AL 4043A
AWS 5.10: ER 4043
W 3.2245
Approvals: DB
Chemical Fe Cu Mn Cr Zn Ti
Mechanical properties:
Yield strength, Re : 40 N/mm²
Tensile Strength, Rm : 120 N/mm²
Elongation, A5 : 8%
Impact energy, CV:
Welding current:
Shielding gas: Ar, Ar + 30% He - I1, I3
Metal recovery:
Redrying temperature:
Melting range: 573 to 625
Hydrogen cont. / 100g weld metal
Hardness as welded:
Wire-Ø Length Item-No. Packing Units
2,0 mm 1000 mm 097-003497-10020 Package 2,5 kg Covering Box 10.00 kg
2,4 mm 1000 mm 097-003497-10024 Package 2,5 kg Covering Box 10.00 kg
3,2 mm 1000 mm 097-003497-10032 Package 2,5 kg Covering Box 10.00 kg
We can deliver in all diameters and pack forms e.g plastic slide boxes on request.
www.ewm-group.com EWM reserves the right to change specifications without prior notice. 51
TR CuNi Copper
Description:
• TIG welding rod, copper-based
• For heavy-duty, corrosion resistant GMA-surfacing on steel.
• Seawater resistant.
Classification:
EN 14640 S Cu 7158 (CuNi30) CuNi30 Cu7158
AWS 5.7: ER CuNi
BS 2901P.3 C18
W 2.0837
Materials:
Approvals:
Chemical Ni Mn Fe Ti
Mechanical properties:
Yield strength, Re :
Tensile Strength, Rm : 420 N/mm²
Elongation, A5 : 36%
Impact energy, CV: > 240 J
Welding current:
Shielding gas: Ar, Ar + 30% He - I1, I3
Metal recovery:
Redrying temperature:
Melting range: 1180 to 1240
Hydrogen cont. / 100g weld metal
Hardness as welded: 115 HB
Wire-Ø Length Item-No. Packing Units
2,4 mm 1000 mm 097-003501-10024 Package 5 kg Covering Box 20.00 kg
We can deliver in all diameters and pack forms e.g plastic slide boxes on request.
52 EWM reserves the right to change specifications without prior notice. www.ewm-group.com
www.ewm-group.com EWM reserves the right to change specifications without prior notice. 53
&OR MORE INFORMATION PLEASE VISIT
WWWEWM
GROUPCOM
WWWEWM
TVDE
%7- ()'(4%# 7%,$).'