Documente Academic
Documente Profesional
Documente Cultură
VoIP Software for ITSPs VoIP Billing, Softswitch, IP PBX Call Control, 24/7x365 Support PortaOne.com
VoIP Application Server Provides IP Centrex, Hosted PBX and Residential VoIP Services www.teles.de
Online Deals Pakistan Chance To Win Over 100 Free Trips Worldwide. Sign Up & Invite Others! www.QatarAirways.com/1
Voxilla Residential Voip Business Voip Ask Voxilla Voxilla Store Forums
Voxilla VoIP Forum > Hardware/Software Support Forums > Cisco/Linksys (Sipura) User Name User Name Remember Me?
VoIP Support Forum
Password Log in
SPA3000 India/Pakistan settings
Ads by Google VoIP Sip for VoIP Sipura PSTN Gateway Sip PSTN
Cisco/Linksys (Sipura) VoIP Support Forum Technical support, how-to guides, troubleshooting, and general assistance
for Cisco and Linksys VoIP hardware, including the highly recommended SPA3102 Voice Gateway and the SPA525G IP
telephone.
Voxilla Recommends
LinkBack Thread Tools Rate Thread Display Modes
We are planning to add India and Pakistan specific settings for the SPA3000 to the localization wizard. Voxilla News
If you have a working SPA3000 in India or Pakistan, please post the settings that have worked for you.
No Surprise: Google to Shut Down
The specific settings we are looking for are: Gizmo5 03/04/2011
You can add another reason to
FXO port impedance purchase an OBi110 Analog Telephone
Disconnect Tone Adaptor. In a few weeks Google is
Gain settings shuttering the Gizmo5 VoIP service it
Caller ID Method purchased 15 months ago, killing off
Dial plan the only product offered by the tech
giant that could link its Google Voice
any other setting that may be useful. calling service with other ATAs and IP
PBXes, such as Asterisk. [...]
Vick
http://forum.voxilla.com/cisco-linksys-sipura-voip-support-forum/spa3000-india-pakistan-... 3/18/2011
SPA3000 India/Pakistan settings Page 2 of 4
I have my Sipura 3000 (Software Version: 2.0.13(GWg) Hardware Version: 2.0.1(4e16)) running How To: OBify Your IP Phone (No
pretty well with the default settings in Pakistan for a while now Asterisk Involved) 02/15/2011
Do you have an extra line sitting empty
on that IP phone on your desk? Here’s
an idea for it: Use it to make and
December 24th, 2005, 08:08 AM #4 (permalink) receive Google Voice calls by linking it
Join Date: Oct 2005 to an OBi110. Setting up an IP phone-
Kamran Posts: 42 OBi connection will also allow you to
Member dial other OBi users directly and easily
give the [...]
sorry, I just recalled I did a few tweaks when wasnt able to dial '#' or sometimes '0' while connected
via PSTN line and tried to use VoIP: OBi110 Back in Stock, But Hurry
02/08/2011
Obihai’s powerful OBi110 VoIP adaptor
Original Settings -> New Settings
is back in stock, but it’s anyone’s guess
for how long. The $50 adaptor,
SIP
developed by the engineers behind
Cisco’s SPA series of VoIP adaptors, has
RTP Parameters
been flying off the shelves at Amazon
RTP Packet Size: 0.030 -> 0.040
and other retailers, largely as the result
of a slew of positive write-ups about the
SDP Payload Types
device’s ability [...]
AVT Dynamic Payload: 101 -> 96
Regional
More Voxilla news
Miscellaneous
FXS Port Impedance: 600 -> 220+820||120nF
PSTN Line
International Control
FXO Port Impedance: 600 -> 220+820||120nF
Tip/Ring Voltage Adjust:3.5 V -> 3.1 V
On-Hook Speed: Less than 0.5ms -> 26 ms (Australia)
and to be honest I dont know which one of the above tweaks really solved my problem, but it did the
magic
Kamran, need some help here. I am trying to configure FWD on VoIP2 and set up a PSTN-VoIP
gateway. Any help here would be appreciated.
Quote:
u'll have to configure fwd account settings under both ur PSTN and LINE1 tab as :
Sip port must be different, assume 5061 for LINE1 and 5062 for PSTN Line
proxy: fwd.pulver.com
outbound proxy:fwdnat.pulver.com:5082
Use OutBound proxy: yes
Use OB in dialog: yes
Proxy Fallback interval:3600
userID: ur userid
password: your password
AuthID: no
http://forum.voxilla.com/cisco-linksys-sipura-voip-support-forum/spa3000-india-pakistan-... 3/18/2011
SPA3000 India/Pakistan settings Page 3 of 4
On the PSTN line tab, under PSTN to VoIP Gateway setup, make the following changes:
On the PSTN Line tab under PSTN-To-VoIP Gateway Setup, change as follows:
PSTN Caller 2 PIN: 5678
PSTN Caller 2 DP: 2
On the LINE1 Line tab under Gateway Accounts define different gateways to use them according to
their calling rates for different countries.
Anyway,If you press #3 after authentication, u will hear a dialing tone, and then u can dial
any number and the call will route through any provider whose settings have been setup
under LINE1 Tab which id FWD in your case
and further if you want to give someone who's dialing your fwd number access to the local dial tone
(i.e VOIP to PSTN):
On the PSTN line tab, under VoIP-To-PSTN Gateway setup, make the following changes:
Thanks for the info. Kamran. Can you please let me know how to do this with Line 1 having a different
provider while PSTN tab having FWD. Additionally, any information on Telecard FWT settings for
impedence as I am using them for the PSTN side.
Think of them as two separate units in one box. Line 1 is what you access when you pick up the phone
connected to the 3K. The pstn line is what you plug into your wall jack. VoIP Line 1 ---> a phone ,
PSTN---> your phone line
Look at the block diagram in the manual. You could have two different FWD numbers, one in the line
one settings and one in the PSTN settings, or a completely different provider, or several (including
FWD) on line one. Someone calling the first number (line 1) would ring your phone, calling the second
would get dialtone from your landline (after inputting a pin etc...) You could pick up the phone and dial
your second number coming right back in onn the PSTN line and get dialtone.
.
Telecard is a local WLL provider who is providing PSTN type service over a CDMA network. I think you
understood my statement incorrectly.
http://forum.voxilla.com/cisco-linksys-sipura-voip-support-forum/spa3000-india-pakistan-... 3/18/2011
SPA3000 India/Pakistan settings Page 4 of 4
spa3000.0moola.com
« Best SPA 3000 codec for P2P setup between US and India? | SPA-3000 India MTNL PSTN - VOIP Localization Settings Help!!
»
Posting Rules
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Rules
Similar Threads
Thread Thread Starter Forum Replies Last Post
January
HT 488 Settings for India nandashyam Grandstream Support Forum 4 21st, 2006
07:55 PM
July 28th,
India and Pakistan Biken Press releases 1 2005
11:27 AM
June 14th,
Sipura 3000 PSTN FXO settings for India mikey2006 Cisco/Linksys (Sipura) VoIP Support Forum 2 2005
04:59 AM
http://forum.voxilla.com/cisco-linksys-sipura-voip-support-forum/spa3000-india-pakistan-... 3/18/2011