Documente Academic
Documente Profesional
Documente Cultură
MORE
BackBeat™ 903+
Bluetooth® Headphones
TAKE A GOOD LOOK
PLT_BB903+
For the best sound performance and a secure, comfortable 1. Drape the stereo cable behind your neck.
fit, be sure to adjust the headphones to rest gently in your 2. Guide one earpiece behind your ear and secure the
ear and drape around the back of your neck. eartip inside your ear using the telescoping/swivel
adjustments.
3. Repeat step 2 with the other earpiece and continue
to adjust the fit in each ear until both eartips rest
comfortably and securely in your ears.
LISTEN TO THE VOICE
These headphones whisper various WHAT YOU’LL HEAR WHEN YOU’LL HEAR IT
status alerts when you power on/off, Listening Time: (7 hrs, 6 hrs, After 2-second press of the Power button to turn on
run low on listening time, or lose/ 5 hrs, 4 hrs, 3 hrs, 2 hrs, 1 hr) power or after a short press during music play
reconnect the Bluetooth connection Battery Low When you have approximately 30 minutes left before
to your phone. the battery must be recharged
Recharge Battery When you have approximately 10 minutes left before
the battery must be recharged
Connected After pressing the Power button to turn on power or to
reconnect a dropped Bluetooth connection
Incoming Call As an incoming call rings to your phone
Track Forward/Back After 2-second press of either track forward + or track
backward - button
Mute On After tapping the Music button during a call
Mute Off When on mute during a call, after tapping the Music
button
Lost Connection When the phone loses the Bluetooth connection with
the headphones
TIPS
Make Calls With Voice Dialing: Check the Battery Level: Stay Near Your Device:
Your headphones can work with If you are on a call or listening to Bluetooth has a working “range” of
your phone’s voice dialing feature. music and hear 3 high tones then up to 33 feet between the device and
Press the Call button for 2 seconds you have under 10 minutes of headphones before audio degrades
and listen for the low tone. Your phone listening time remaining. and the connection is lost. For best
may prompt you by saying something At other times, you can check the audio reception, keep your device on
like “Name Please.” Check your phone’s battery level by tapping the Power the left side of your body.
documentation for details. button. The headphones will say
how many hours of useage remain.
Hear What’s Going On Around You: Know How to Reconnect:
Your headphones use the OpenMicTM The LED also flashes red to show Your headphones try to reconnect
feature to pause the music when you the battery level. a lost Bluetooth connection. If they
want to hear your surroundings or 1 flash = more than 2/3 full can’t, then tap the Call button once
have a quick chat with someone near- 2 flashes = 1/3 - 2/3 full or manually reconnect via the device’s
by. To use this feature, tap the Music 3 flashes = less than 1/3 full Bluetooth menu.
button once, then tap it again when
you are finished and want to resume
music play.
To disable this feature, press the Call
and Volume Down buttons for 3 sec-
onds (you will hear a low-high-low set
of tones). To re-enable it, press the Call
and Volume Down buttons for 3 sec-
onds (you will hear a high-low-high set
of tones).
SPECIFICATIONS
Bluetooth Version 2.1 + Enhanced Data Rate (EDR) and eSCO data packet
transfer
© 2010 Plantronics, Inc. All Rights Reserved. Plantronics, BackBeat and OpenMic
are trademarks or registered trademarks of Plantronics, Inc. Bluetooth is a registered
trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. iPhone is
a trademark of Apple, Inc., registered in the U.S. and other countries. Blackberry is the
property of Research In Motion Limited and is registered and/or used in the U.S. and
countries around the world. All other trademarks are the property of their respective Z109
owners. Patents US D619561; China ZL200930192537.2; EM 001142582-002; Taiwan N10687
D135150; Patents Pending AM84445-01 (08/10)