Documente Academic
Documente Profesional
Documente Cultură
Diesel Engine:
Caterpillar Engine Model 3306 AWAC, 6 cylinder 4 stroke diesel engine developing
306 BHP at 1500 rpm, water cooled, IN-LINE Engine with a Bore of 137 mm and
Stroke of 165 mm suitable for Gen set application with standard accessories as
mentioned in the scope of supply for the engine. Engine confirms to as per ISO
3046 / BS 5514 / SAE J 1349 Standards.
CHARGING SYSTEM:
Charging Alternator, 24 V, 35 A
CONTROL SYSTEM:
Governor, CAT Hydra-mechanical
COOLING SYSTEM:
Blower Fan, Fan Drive and Fan Guard, only with Radiator
Engine Coolant Thermostats
Jacket Water Pump, Gear Driven, Centrifugal
Radiator or Heat Exchanger, as required
EXHAUST SYSTEM:
Exhaust Elbow, Dry
Exhaust manifold, Dry Type
Flexible Fitting – Exhaust
Muffler – Residential
FUEL SYSTEM:
Flex Fuel Lines
Fuel Filter, Primary
Fuel Filter, Secondary
Fuel Priming Pump, Manual
1
Fuel Transfer Pump
New Scroll Type FIP
LUBE SYSTEM:
Crankcase Breather
Oil Cooler
Oil Filler & Dipstick
Oil Pump, Gear type
Oil Sump
PROTECTION SYSTEM:
Low Lube Oil Pressure Shutoff
High Jacket Water Temperature Shutoff
Over Speed Shutoff
STARTING SYSTEM:
Electric Starter Motor, 24 V
GENERAL:
Vibration Damper
Paint – Caterpillar Yellow
First fill of Lube Oil
ALTERNATOR:
Brush less, Single bearing, Self-excited and Self-regulated, 3 Phase, 4 Wire, 415 V,
50 Hz, 0.8 Power Factor, IP 23 Enclosure, Class ‘H” Insulation, provided with
Automatic Voltage Regulator to hold the output voltage constant and provide fast
response to sudden load changes. The alternator is designed, built and tested to
comply with or better IS 4722 or equivalent standards.
BASE FRAME:
The engine and alternator are coupled through a flexible coupling and mounted on a
common base frame. The base frame is sturdy, fabricated, welded construction,
channel iron base frame designed in accordance with CATERPILLAR norms and
manufactured to CATERPILLAR standards.
FUEL TANK:
Standard scope includes a 550 Liters capacity fuel tank with mounting brackets
which is complete with level indicator, fuel inlet and outlet, air vent, drain plug, inlet
arrangement for direct filling.
2
BATTERY & BATTERY STAND:
EXIDE / equivalent. 2 nos. 12 V, 180 A -H, Dry & Uncharged condition with Battery
Cables and Battery stand.
The standard panel supplied with the DG. Set is Floor Mounting, Free standing,
Cubicle type panel with Front Hinged and Rear Bolted doors. The panel is fabricated
of 14 / 16 SWG CR Sheet steel and is finished with the SEVEN TANK PROCESS. The
panel is painted using the Powder Coating process with CAT YELLOW color.
Audio Visual Annunciation for Low oil pressure, High water temperature & Over
Speed