Documente Academic
Documente Profesional
Documente Cultură
NB: If you select ‘DHCP’ here, you will need to re-connect your browser using the
allocated IP address before continuing to configure.
KX-HGT100 Configuration (5)
NB: When using DHCP, ensure that the PC connected to the PC-Port
is on the same network segment as the HGT-100, otherwise Internet
access from the PC will not be possible.
KX-HGT100 Configuration (7)
Username and Password:
If Idle Timeout expires, unit will need to be powered off/on to re-open HTTP port. (“Special” Setting)
KX-HGT100 Configuration (8)
Basic Settings:
Refer to next slide for
language parameters;
SIP Number,
Account and
password.
SIP Proxy,
Registrar and
Domain (IP or
DNS).
KX-HGT100 Configuration (11)
Advanced Settings: RTP Port Range (Voice Traffic)
Codec Priority:
PCMA/U = G711A/U
G726-32 (N/A for TDA/NCP)
G729A
DTMF Type:
Inband/Outband(RFC2833)
SIP UDP Control port
One Time Caller Code either Permits or Denies CLIP sending on a per call basis,
depending on the “My Caller ID” setting of the HGT100.
KX-HGT100 Configuration (14)
Configuration File:
Lan/PC Port.
Speed/Duplex Settings;
Auto Negotiate
100Mbps/Full Duplex
100Mbps/Half Duplex
10Mbps/Full Duplex
10Mbps/Half Duplex
‘INFORMATION’ KEY
‘NAVI’ KEY
‘SP-Phone ‘Key
SP-Phone, Hold
‘MUTE’ KEY and Message Keys
‘REDIAL’ KEY have LED.
KX-HGT100 User Setting (2)
Keys used:
PROGRAM Select OK
1.
Save Speed Dial? Enter No. 1 No. 1 [OK]=SET
[OK]=YES 0123456789
Saved in No. 1
How to access :-
Speed dial 0 ~ 9
AUTO ‘OFF-HOOK’
1
KX-HGT100 User Setting (3)
2.
Set Date + Time Enter Year 2008 Enter Month/Day
[OK]=YES [OK] 05/07 [OK]
3.
My Caller ID
OK Select OK
(Show) [OK]=YES Show/Hide
CLIR (Show/Hide)
KX-HGT100 User Setting (4)
4.
LCD contrast ? - ██████ +
Select
[OK]=YES [OK]=YES
4 STEPS
5.
Ringer Tone ? Ringer Tone ?
Select
Ring 1 [OK]=YES Ring 2 [OK]=YES
3 STYLES
6.
Ringer Volume ? Ringer Volume [OK]
Select
Ring 1 [OK]=YES OFF - █████ +
4 Position + ‘OFF’
‘OFF’ = SP-Phone LED Flashes
KX-HGT100 User Setting (5)
7.
Set Hold Music ?
OK Select
(#01) [OK]=YES
#11 Settings (Inc ‘OFF’)
8.
KeyTone Volume ? Keytone Volume
Select
[OK]=YES OFF - ███ + [OK]
3 Settings (Inc ‘OFF’)
9.
Time AM/PM 24H
OK Select AM/PM/24H
(AM) [OK]=YES
KX-HGT100 User Setting (6)
10.
Refer to
Change Language ?
OK Select Slide #14
English [OK] for
supported
languages
11.
STATIC IP
Set Network ?
OK Select Or
(STATIC) [OK]=YES
DHCP
2 5
Status Subnet Mask
Normal 255.255.255.0
3 4
Network IP Address
STATIC 192.168.010.003
KX-HGT100 ‘Special’ setting (1)
‘Special’ Settings:
Factory Default:
To return the unit to it’s factory default settings, press
[Program] + [OK] + [Mute] and power-on the unit.
If successful, “Not Configured Web Setting” will be displayed in the LCD.
Firmware Roll-back:
To rollback the firmware to the previously installed version
[Program] + [Mute] and power-on the unit.
Panasonic Telephone Systems
See More www.voicesonic.com
Panasonic Manuals Phone 877-289-2829