Documente Academic
Documente Profesional
Documente Cultură
Student’s name:……………………………..
LoginID……………………………………� ��..
Note:
Requirements:
· Entire network use the IP range: 10x.10.32.0/21.
· All routers can connect via telnet from anywhere in the network.
· After finishing your configuration, you have to copy all of router configurations to TFTP server.
Given the network as in the diagram above, you need to create subnets with the given IP address
of a major IP network. As for router configuration, you need to make the IP routing among all
network segments. After finishing the configuration tasks, students have to ‘capture’ the
configuration to text files and give to the examiner.
Note: Regarding the overall cooperation among team members –example: IP subnneting– the
examiner watches the performance of the whole team and gives the score.
b) IP address and subnest mask: Set IP address correcly for all related interfaces.
c) Password: Console, AUX, and vty lines are password protected, password= ‘cisco’; set the secret
password to ‘class’.
d) Banner and descriptions: Banner contains the name of the student who configures it;
descriptions of interface contain the name of the device it connects to. Banner (motd) example:
Hello, this is router 1, configured by Alice. Interface description example: Connect to router ‘saigon’.
e) Backup configuration file: back up configuration file of each router using either TFTP or Capture
Text.
Use EIGRP 100 for interface serial 1, 2, loopback 0. Use OSPF for interface serial 3.
Redistribute between OSPF and EIGRP (include the default-route which R1 learnt from EIGRP).
Student 2:
Configure the default-route through Lo0, and propagates it into EIGRP 100.
Student 3:
Use EIGRP 100 for interfaces serial 0/0, 0/1 and loopback 0
Configure static route (one command) for all remote routes through Lo0, and propagates into
EIGRP 100.
Student 4:
Use OSPF for interfaces serial 0/1, fastEthernet 0/0 and loopback 0
Configure static route (one command) for all remote routes through Lo0, and propagates into OSPF
area.
Student 5:
Configure static route (one command) for all remote routes through Lo0, and propagates into OSPF
area.
Student 6:
Configure static route (one command) for all remote routes through Lo0, and propagates into OSPF
area.
__________________