Documente Academic
Documente Profesional
Documente Cultură
PG 6 58 1 (B)
004
GT MODELS AND RATING
Note: ISO output is : 15 deg C, 60% RH, Zero MSL, Gas fuel
and standard Inlet/Exh. Pr. drops
POWER(29.5 %)
EXHAUST
FUEL GAS
(100 %) TURBINE HEAT
(67 %)
MISC.
(3.5 %)
• Ambient Temperature
• Altitude above Mean Sea Level (MSL)
• Relative Humidity
• Inlet Pressure Loss
• Exhaust Pressure Loss
• Steam / Water Injection for NOX Control
• Type of Fuel
PRESSURE DROP EFFECTS (FOR FRAME -6)
Q in
6000C
TEMPERATUR 4
E
Q out D
2 Gas Cycle
3000 C
C
B Steam Cycle
45 C
0
00 C 1 A E
ENTROPY
• EFFICIENCY
INCREASES BY 1 POINT FOR EVERY 600 C OF T3
•COMBINED CYCLE COMBINES BEST OF :
– BRAYTON CYCLE VIZ: HIGH TEMP HEAT ADDITION (11040 C)
– RANKINE CYCLE VIZ: LOW TEMP HEAT REJECTION (45 0C)
Turbine Rotor
Each wheel(stage) with buckets & balanced
CONSTRUCTIONAL FEATURES:
Compressor Stages 17
Turbine Stages 3
Number of Combustors 14
Pressure Ratio 12.6
Firing Temperature (°C) 1124
GT Speed (rpm) 3000
9E DESIGN FEATURES
17 Stage axial Compressor
Turbine & Accessory bases are skid mounted
Accessory base contains starting system, Lube oil console,
shaft driven accessory gear box driving Lube, Fuel,
hydraulic oil and atomizing air compressor
Honey comb seals for 2nd & 3rd stages
1st & 2nd stage buckets & Nozzles are air cooled
Motor/ SFC starting facility
Hot end drive
Completely packaged and factory assembled, tested.
PLANT ARRANGEMENT OF 9E
Construction
Compressor stages : 17
Turbine stages : 2
Number of combustors : 10
Pressure ratio : 10.3
Firing temperature : 963°C
Load gear box rating : 31500KW
Load gear design : Single helical
MS 5001PA DESIGN FEATURES
Construction
Compressor stages : 17
Turbine stages : 3
Number of combustors : 10
Pressure ratio : 11.8
Firing temperature : 1104°C
Load gear box rating : 54000KW
Load gear design : Double helical
MS 6001 DESIGN FEATURES
CONSTRUCTIONAL FEATURES:
Compressor Stages 17
Turbine Stages 3
Number of Combustors 14
Pressure Ratio 12.6
Firing Temperature (°C) 1124
GT Speed (rpm) 3000
9E DESIGN FEATURES
17 Stage axial Compressor
Turbine & Accessory bases are skid mounted
Accessory base contains starting system, Lube oil console,
shaft driven accessory gear box driving Lube, Fuel,
hydraulic oil and atomizing air compressor
Honey comb seals for 2nd & 3rd stages
1st & 2nd stage buckets & Nozzles are air cooled
Motor/ SFC starting facility
Hot end drive
Completely packaged and factory assembled, tested.
PLANT ARRANGEMENT OF 9E
A : 006