Documente Academic
Documente Profesional
Documente Cultură
AN5277
Dual Channel SEPP Power Amplifier
■ Overview Unit : mm
The AN5277 is a monolithic integrated circuit designed 7.7±0.3
12
for 10.0 W (26 V, 8 Ω)output audio power amplifier. It is
(1.3)
a dual channel SEPP IC suitable for stereo operation in
TV application.
(10.0)
φ3.6
(1.27)
29.75±0.30
28.0±0.3
20.0±0.3
29.6±0.3
■ Features
+0.15
R1.8
• No Boucherot cells(output C, R)
0.6
• No Bootstrap Capacitors
1.45±0.15
• No Negative Feedback Capacitors
+0.10
(12.5)
• Built-in muting circuit
3.5±0.3
1.2±0.1
• Built-in standby circuit
1.80±0.15
(1.2)
■ Applications
• TV
■ Block Diagram
Protection circuit
Temperature
Over voltage
Att. Att. con Over current
Load short
Ripple
filter
10
Standby 11
12
1
GND 4
GND 9
N.C.
ch.1 In.
RF
(Input)
ch.2 In
N.C.
ch.2 Out
Mute
(Output)
VCC
ch.1 Out
1
AN5277 ICs for Audio Common Use
■ Pin Descriptions
Pin No. Description Pin No. Description
1 N.C. 7 ch.2 Output
2 ch.1 Input 8 Mute
3 Ripple Filter 9 Output GND
4 Input GND 10 VCC
5 ch.2 Input 11 Standby
6 N.C. 12 ch.1 Output
2
ICs for Audio Common Use AN5277
30 kΩ
30 kΩ
3
20 kΩ
15 kΩ
15.7 kΩ
4 Input GND : 0V
Input ground pin.
5 Refer to Pin2 ch.2 Input :
This is the amplifier input pins.
6 Not connected
7 ch.2 Output : VCC/2
10
ch.2 output pin
Driver Cct
Pre-amp.
7
600 Ω 30 kΩ 9
VCC/2
3
AN5277 ICs for Audio Common Use
3 kΩ 3 kΩ
10 kΩ
8
200 Ω
9 Output GND : 0V
ch.1 & ch.2 output ground.
10 VCC : typ. : 26 V
This is the power supply pin.
11 10 Standby :
This is the standby control pin.
11
5 kΩ
5 kΩ
3 kΩ
Driver Cct 12
Pre-amp.
600 Ω 30 kΩ 9
4
ICs for Audio Common Use AN5277
100 µF
VCC
3 R.F.
1 000 µF
10
VCC
STB Off 11
STB On STB
1 µF
VIN1 2
1 000 µF
12
10 kΩ
SP
8Ω
1 000 µF
7
1 µF
VIN2 5
SP
10 kΩ 8Ω
5V
Mute On 8.2 kΩ Mute 8
Mute Off
10 µF 9
Output GND
1
6
N.C.
N.C.
STB 'On' 0V
Mute 'Off' 0V
Mute 'On' 5V
■ Usage Notes
1. External heatsink is needed when used. External heatsink should be fixed to the chassis.
2. Fin of the IC can be connected to GND.
3. Please prevent output to VCC short and output toGND short.
4. Load short protection will only prevent the IC from damaging if operating VCC<30 V
5. The temperature protection circuit will operate at Tj around 150 °C.
However, if temperature decrease, the protection circuit will automatically be deactivated and resume
normal operation.
5
AN5277 ICs for Audio Common Use
■ Technical Information
• PD Ta Curves of HSIP012-P-0000A
PD Ta
80
70
50
(1)
40
30
20.8 W
20
15.6 W (2)
(3)
10
3.0 W (4)
0
0 25 50 75 100 125 150