Documente Academic
Documente Profesional
Documente Cultură
1. TMC
[Upper rear vest panel]
1
4
2. UTD 2
[Front vest panel, chest or
lower torso]
3
4. GPS
[Left shoulder]
Modular Tactical System (MTS) Specifications SPECIFICATION SHEET
www.bdatech.com
7450 South Priest Drive tel +1 (480) 705-4200
Tempe, AZ 85283, USA fax +1 (480) 705-4216 ©2011 RMT, Inc. Black Diamond Advanced Technology is a product line of RMT, Inc.
MTS In The Field SPECIFICATION SHEET
UTD
TMC
The MTS display in “NVG-mode” produces no detectable light This image shows the heat signature of the MTS Tactical Mission
beyond 10 meters. Utilized PVS-14 and PVS-15 night vision goggles Controller is similar to that of the user’s body temperature.
in cold, dark night conditions. Crescent moon low on horizon.
The MTS system is currently fielded in Afghanistan in combat The system being utilized in real world conditions for targeting and
operations in support of OEF. This image shows how the MTS can navigation.
be adapted to the soldier’s existing plate carrier system.
www.bdatech.com
7450 South Priest Drive tel +1 (480) 705-4200
Tempe, AZ 85283, USA fax +1 (480) 705-4216 ©2011 RMT, Inc. Black Diamond Advanced Technology is a product line of RMT, Inc.
MTS System Components SPECIFICATION SHEET
Optical mouse
Gold dot connection
On-sceen keyboard Stylus
button
L & R click Programmable
buttons
Programmable
buttons
Grip surface
www.bdatech.com
7450 South Priest Drive tel +1 (480) 705-4200
Tempe, AZ 85283, USA fax +1 (480) 705-4216 ©2011 RMT, Inc. Black Diamond Advanced Technology is a product line of RMT, Inc.
MTS System Components SPECIFICATION SHEET
* Or if equipped with Raytheon Taclink™ Channel 1 and Channel 2 connectors with Remote KDU interface and Ethernet
MIL-STD-461F
www.bdatech.com
7450 South Priest Drive tel +1 (480) 705-4200
Tempe, AZ 85283, USA fax +1 (480) 705-4216 ©2011 RMT, Inc. Black Diamond Advanced Technology is a product line of RMT, Inc.
MTS System Components SPECIFICATION SHEET
RS-232
2x Type A USB
Audio in/out
Sealed USB
TMC connection
The Tactical Hub provides I/O capability for audio, data and MIL-STD-461F
power. All ports are fully sealed (IP-67). Tethered dust covers are
included.
Input/Output
3x USB
2x Type A sealed commercial connectors
1x sealed circular connector high retention
force
RS-232
Audio in/out
Power
9–35 VDC input
MIL-STD-1275 compliant
www.bdatech.com
7450 South Priest Drive tel +1 (480) 705-4200
Tempe, AZ 85283, USA fax +1 (480) 705-4216 ©2011 RMT, Inc. Black Diamond Advanced Technology is a product line of RMT, Inc.
MTS System Components SPECIFICATION SHEET
GPS Module
Vest Configuration
• Integrated shoulder mounted pouch
• Sits to the side of the vest shoulder strap,
prevents pressure point from assault pack
• Optimal viewing angle to sky
Overview
The GPS module connects to the TMC for data and power. It is
captured in a pouch that attaches to the shoulder strap of the
tactical vest. The TMC GPS interface also supports connection to
a DAGR.
Communications
High sensitivity commercial grade GPS
SiRFstarIII chipset
1 Hz NMEA serial data stream
Shoulder-mounted for clear view of sky
Physical
1.7 (L) x 1.4 (W) x 0.6 (H) in.
1.9 oz (with cable)
Environment
Operating temperature -22 to 140 °F [-30 to +60 °C]
Storage temperature -40 to +167 °F [-40 to +75 °C]
Sealing IEC60529 IP67
MIL-STD-810G
MIL-STD-461F
www.bdatech.com
7450 South Priest Drive tel +1 (480) 705-4200
Tempe, AZ 85283, USA fax +1 (480) 705-4216 ©2011 RMT, Inc. Black Diamond Advanced Technology is a product line of RMT, Inc.
MTS Tactical Gear SPECIFICATION SHEET
The MTS system is designed to integrate with any tactical plate • Adjustable, sewn-in webbing supports keep the
carrier. The Universal Tactical Display and the Tactical Mission display at approximately 80 degrees to operator’s line
Controller are MOLLE on components allowing the user to of sight
customize the placement of these devices. To optimize cable
routing, the MTS is available with a custom cummerbund (patent
• Lightweight designs from 500 denier Nylon
pending) and/or a fully customized tactical plate carrier. The MTS • Vests are compatible with existing hard and soft armor,
is currently integrated with the RBAV (Releaseable Body Armor including SAPI/ESAPI armor plates
Vest) by BAE Systems and the MMAC (Multi Mission Armor Carrier
by Eagle Industries. These vests are designed to optimize the use • RBAV Specific
of the MTS system by providing built-in features for cable routing -- Supports emergency doffing with all cables installed
and distribution. This includes easy cable routing through the
-- Integrated 8-foot, quick-release rescue straps
cummerbund, access points for routing cables in/out of the vest,
and features for holding the Tactical I/O Hub and GPS. -- Integrated hydration bladder pocket
• MMAC Specific
BBATech also offers a carry pack for user’s who do not require a
wearable MTS solution. -- Lighter, more compact design solution
-- Removable cummerbund with cable management
features
Tactical Vests -- Supports MMAC elastic cummerbund for use in MTS light
mode (HMD use only)
• Low-profile computer system attaches via MOLLE and
shock cord to the back of plate carrier
• Supports foot mobile and in-vehicle operations
• Full complement of PALS to attach all other necessary
equipment.
• Cables are easily routed through the cummerbund
(patent pending) to specific devices
• Shoulder mounted GPS provides the best view of the
sky while not limiting any strap placement for assault
packs
www.bdatech.com
7450 South Priest Drive tel +1 (480) 705-4200
Tempe, AZ 85283, USA fax +1 (480) 705-4216 ©2011 RMT, Inc. Black Diamond Advanced Technology is a product line of RMT, Inc.
MTS Tactical Gear SPECIFICATION SHEET
Hydration bladder
access
Shoulder strap w/GPS pouch
www.bdatech.com
7450 South Priest Drive tel +1 (480) 705-4200
Tempe, AZ 85283, USA fax +1 (480) 705-4216 ©2011 RMT, Inc. Black Diamond Advanced Technology is a product line of RMT, Inc.
MTS Tactical Gear SPECIFICATION SHEET
Features
Vest Full compliment of PALS
Customized rear panel for porting cables
Shoulder pads with integrated GPS
Integrated front MAG pockets
Integrated map/admin sleeve
Optional pack retention buckles
Cummerbund Easily accessible cable stow panel
I/O hub shown in cummerbund Shoulder retention feature for cable
Adjustable cummerbund length management (i.e. HMD cable)
Easily removed from rear vest panel via Velcro
Built-in feature for holding I/O Hub (optional)
www.bdatech.com
7450 South Priest Drive tel +1 (480) 705-4200
Tempe, AZ 85283, USA fax +1 (480) 705-4216 ©2011 RMT, Inc. Black Diamond Advanced Technology is a product line of RMT, Inc.
MTS Tactical Gear SPECIFICATION SHEET
Elastic for routing cables under I/O Hub pouch MOLLE pouch for radio/VDL device
www.bdatech.com
7450 South Priest Drive tel +1 (480) 705-4200
Tempe, AZ 85283, USA fax +1 (480) 705-4216 ©2011 RMT, Inc. Black Diamond Advanced Technology is a product line of RMT, Inc.
MTS Software Applications SPECIFICATION SHEET
www.bdatech.com
7450 South Priest Drive tel +1 (480) 705-4200
Tempe, AZ 85283, USA fax +1 (480) 705-4216 ©2011 RMT, Inc. Black Diamond Advanced Technology is a product line of RMT, Inc.
MTS Testing Methods And Procedures SPECIFICATION SHEET
The MTS shall power on (boot) and operate normally after un-powered storage at -30C (operational) for no less than one hour prior to application of power. Use MIL-
STD-810G, Method 502.5, Procedure II as a guide. A boot delay of less than 10 minutes is acceptable to allow internal heating for temperatures below -10C.
The MTS shall operate normally following storage according to MIL-STD-810G, Method 502.5, Procedure I at -40C (non-operational).
High Temperature
The MTS shall operate per MIL-STD-810G, Method 501.5, Procedure I and Procedure II, +60C Operational, +75C Non-Operational (storage). [Battery charge suspended
above +60C cell temperature, MTS installed on tactical plate-carrier vest].
Immersion
The MTS shall meet Operational: MIL-STD-810G, Method 512.5, Procedure I (One meter of water, 30 minutes).
Altitude
The MTS shall meet Operational: MIL-STD-810G Method 500.5, Procedure II, 8,000 feet. Non-Operational (storage): Procedure I, 40,000 feet.
Drop Shock
The MTS, while installed on the tactical plate-carrier vest, shall operate normally during and after being subjected to five drops on the face and five drops on the back
(10 drops total) into 4” of gravel from a height equivalent to a 6’ person falling forward and backward while wearing the vest. Utilize MIL-STD-810G Method 516.6 as a
guideline. May be performed over two UUT samples; surface abrasion and cosmetic damage is acceptable.
Shock
The MTS shall meet Non-Operational: MIL-STD-810G, Method 516.6, Procedure I. 9 shocks in 3 axes at Te=11ms, 2g @ 10Hz, 30g @ 45Hz, 10g @ 1kHz.
Vibration
Workmanship. The MTS shall meet Operational: MIL-STD-810G, Method 514.6, Procedure I, Category 24, Figure 514.5C-17 (20-2000Hz random vibration profile, 0.04g2/
Hz @ 20-1000Hz, -6 dB/octave @ 1000-2000Hz), 3 hours in 3 axes.
Salt Fog
The MTS shall meet Non-operational: MIL-STD-810G, Method 509.5, two 48-hour cycles.
Humidity
The MTS shall meet Non-operational: MIL-STD-810G, Method 507.5, ten 24-hour cycles.
Explosive Atmosphere
Dust
The test shall be conducted in accordance with MIL-STD-810G, Method 510.5, Procedure I. Test condition clarification note: Exposure of the MTS (TMC-A1 + UTD-A2 +
HUB-A3 + GPS-A4) according to MIL-STD-810G, Method 510.5, Procedure I for 3 hours operational at 23°C and an additional 3 hours non-operational at the high storage
temperature. This requirement ensures compliance with the dust-immunity portion of a typical IP-67 product.
Sand
Exposure of the MTS (TMC-A1 + UTD-A2 + HUB-A3 + GPS-A4) to MIL-STD-810G, Method 510.5, Procedure II for 3 hours operational at 23°C and an additional 3 hours
non-operational at the high storage temperature. Minor surface abrasion is considered acceptable and does not constitute a test failure.
www.bdatech.com
7450 South Priest Drive tel +1 (480) 705-4200
Tempe, AZ 85283, USA fax +1 (480) 705-4216 ©2011 RMT, Inc. Black Diamond Advanced Technology is a product line of RMT, Inc.
SPECIFICATION SHEET
Conducted Emissions
The MTS shall be designed to comply with MIL-STD-461F CE102 from 10 kHz to 10 MHz for all power leads, including returns, which obtain power from other sources not
part of the EUT.
Conducted Susceptibility
The MTS shall be designed to comply with MIL-STD-461F CS101, from 30kHz to 150kHz for all power leads not including returns. Momentary degraded performance is
acceptable provided the system does not reset or require manual manipulation to restore proper operation.
The MTS shall be designed to comply with MIL-STD-461F CS114 from 10kHz to 200MHz for all interconnecting cables, including power cables. Momentary degraded
performance is acceptable provided the system does not reset or require manual manipulation to restore proper operation.
The MTS shall be designed to comply with MIL-STD-461F CS115, impulse excitation for all interconnecting cables, including power cables. Momentary degraded
performance is acceptable provided the system does not reset or require manual manipulation to restore proper operation.
The MTS shall be designed to comply with MIL-STD-461F CS116, damped sinusoid transients, 10kHz to 100MHz, for all interconnecting cables, including power cables,
and individual high side power leads. Momentary degraded performance is acceptible provided the system does not reset or require manual manipulation to restore
proper operation.
Radiated Emissions
The MTS shall be designed to comply with MIL-STD-461F RE102 Ground Mobile limits from 10 kHz to 4 GHz.
Radiated Susceptibility
The MTS shall be designed to comply with MIL-STD-461F RS103, for electric fields from 2 MHz to 40 GHz of 50V/m (Army Ground limit). Momentary degraded
performance is acceptible provided the system does not reset or require manual manipulation to restore proper operation.
www.bdatech.com
7450 South Priest Drive tel +1 (480) 705-4200
Tempe, AZ 85283, USA fax +1 (480) 705-4216 ©2011 RMT, Inc. Black Diamond Advanced Technology is a product line of RMT, Inc.