Documente Academic
Documente Profesional
Documente Cultură
This equipment has been tes ted and found to comply with the limits of a Class
B digital devic e, purs uant to Part 15 of the FCC Rules . T hese limits are designed
to provide reasonable protec tion against harmful interference in a residential
installation. T his equipment generates , uses and can radiate radio frequency
energy and, if not ins talled and used in accordance with the instructions , may
cause harmful interference to radio communications . There is no guarantee
that interference will not occur in a particular ins tallation.
The content of this user’s manual is subject to be c hanged without notice and
we will not be res ponsible for any mis takes found in this user’s manual. All the
brand and produc t names are trademarks of their respec tive companies .
Table of Contents
Chapter 1: Introduction ............................................. 1
1.1 Before You Start................................................................... 1
1.2 Package Checklist................................................................ 1
1.3 Motherboard Features.......................................................... 2
1.4 Rear Panel Connectors.......................................................... 3
1.5 Motherboard Layout ............................................................ 4
Chapter 2: Hardware Installation .............................. 5
2.1 Installing Central Processing Unit (CPU) ................................ 5
2.2 FAN Headers........................................................................ 7
2.3 Installing System Memory...................................................... 8
2.4 Connectors and Slots ............................................................10
Chapter 3: Headers & Jumpers Setup ......................12
3.1 How to Setup Jumpers..........................................................12
3.2 Detail Settings.....................................................................12
Chapter 4: RAID Functions.......................................17
4.1 Operation System................................................................17
4.2 Raid Arrays.........................................................................17
4.3 How RAID Works.................................................................17
Chapter 5: Useful Help ..............................................19
5.1 Driver Installation Note .......................................................19
5.2 Award BIOS Beep Code........................................................20
5.3 Extra Information................................................................20
5.4 Troubleshooting...................................................................22
Chapter 6: WarpSpeeder™ .......................................23
6.1 Introduction........................................................................23
6.2 System Requirement............................................................23
6.3 Installation .........................................................................24
6.4 WarpSpeeder™....................................................................25
Appendencies: SPEC In Other Language ................32
German................................................................................................32
France..................................................................................................34
Italian..................................................................................................36
Spanish ................................................................................................38
Portuguese...........................................................................................40
Polish...................................................................................................42
Russian ................................................................................................44
Arabic..................................................................................................46
Japanese ..............................................................................................48
K8M800 Micro A M2
CHAPTER 1: INTRODUCTION
1.1 BEFORE YOU ST ART
Thank you for choosing our product. Be fore you start installing the
mothe rboard, please make sure you follow the instructions be low:
Prepare a dry and stable work ing environment with
sufficie nt lighting.
Always disconne ct the compute r from powe r outle t
be fore ope ration.
Before you take the mothe rboard out from anti-static
bag, ground yourse lf prope rly by touching any safe ly
grounde d appliance, or use grounded wrist strap to
remove the static charge.
Avoid touching the compone nts on mothe rboard or the
rear side of the board unless ne cessary. Hold the board
on the edge , do not try to be nd or flex the board.
Do not leave any unfastene d small parts inside the
case afte r installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the compute r from dange rous a rea, such as hea t
source , humid air and wate r.
1
Motherboard Manual
Socket AM2
CPU Supports Hyper Transport and Cool=n=Quiet
AMD Sempron processors
DIMM Slots x 2
Dual Channel Mode DDR2 memory module
Main Each DIMM supports 256/512MB & 1GB
Supports DDR2 400 / 533 / 667
Memory DDR2
Registered DIMM and ECC DIMM is not supported
Max Memory Capicity 2GB
CPU Fan header x1 CPU Fan power supply (with Smart Fan function)
Special
RAID 0 / 1 support
Features
L ine Out
M ic In
3
Motherboard Manual
1.5 MOT HERBOARD LAYOUT
JKBMS1
JCOM1
JATXPWR1
Socket
JPRNT1
DIMMA1
DIMMB1
F DD1
JVGA1
A M2
JUSB1
JATXPWR2
JCFAN1
IDE1
IDE2
JUSBLAN1
JAUDIO1
K8M800
JCMOS1
BIOS VT8237R+
PCI1 JSATA2
4
K8M800 Micro A M2
CHAPTER 2: HARDWARE INSTALLATION
2.1 INST ALLING CENT RAL PROCESSING UNIT (CPU)
Step 2: Pull the lever toward direction A from the socket and then raise the
lever up to a 90-degree angle.
Step 3: Look for the white triangle on socket, and the gold triangle on
CPU should point towards this white triangle. The CPU will fit only
in the correct orientation.
5
Motherboard Manual
Step 4: Hold the CPU down firmly, and then close the lever toward direct
B to complete the installation.
Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU
FAN power cable to the JCFAN1. This completes the installation.
6
K8M800 Micro A M2
Pin Assignment
JCFAN1 1 Ground
2 +12V
3 FAN RPM rate
1 4 sense
4 Smart Fan
Control
Pin Assignment
1 Ground
2 +12V
3 FAN RPM rate
JSFAN1 sense
1 3
Note:
The JCFAN1 and JSFAN1 s upport 4-pin and 3-pin head connec tors. When c onnecti ng
with wires onto c onnectors, please note that the red wire is the positi ve and s houl d be
connected to pi n#2, and the bl ac k wire is Ground and s hould be c onnected to GND.
7
Motherboard Manual
2.3 INST ALLING SYST EM MEMORY
A. DDR2 module
DIMMA1 DIMMB1
2. Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.
B. Memory Capacity
DIMM Socket DDR Module Total Memory Size
Location
DIMMA1 256MB/512MB/1GB *1
Max memory 2GB.
DIMMB1 256MB/512MB/1GB *1
8
K8M800 Micro A M2
C. Dual Channel Memory installation
To trigger the Dual Channel f unction of the motherboard, the memory module
must meet the following requirements:
Install memory module of the same density in pair, shown in the following table.
The DRAM bus width of the memory module must be the same (x8 or
x16)
9
Motherboard Manual
34 33
2 1
40 39
2 1
IDE1 IDE2
10
K8M800 Micro A M2
PCI1
PCI2
AGP1
11
Motherboard Manual
PWR_LED
SLP On/Off
++ -
9 16
1 8
+ -
SPK RST
HLED
12
K8M800 Micro A M2
JATXPWR2
3 2 Pin Assignment
1 +12V
4 2 +12V
1
3 Ground
4 Ground
13
Motherboard Manual
Pin Assignment
1 +5V (fused)
2 +5V (fused)
3 USB-
4 USB-
5 USB+
6 USB+
JUSB2 JUSB3 7 Ground
2 10 8 Ground
9 Key
10 NC
1 9
14
K8M800 Micro A M2
Pin Assignment
1 Left Channel
Input
2 Ground
3 Ground
1 4
4 Right Channel
Input
3
Pin 1-2 Close:
Normal Operation (Default).
3
1
Pin 2-3 Close:
3 Clear CMOS data.
15
Motherboard Manual
it satisfies the SATA 1.0 spec and with transfer rate of 1.5Gb/s.
Pin Assignment
1 Ground
JSATA1 JSATA2 2 T X+
3 T X-
4 Ground
7 4 1
5 RX-
6 RX+
7 Ground
Pin Assignment
1 +5V
2 SPDIF_OUT 1
3 3 Ground
1
16
K8M800 Micro A M2
CHAPTER 4: RAID FUNCTIONS
4.1 O PERAT ION SYST EM
Supports Windows XP Home/Prof essional Edition, and Windows 2000 Professional.
Block 1 Block 2
Block 3 Bl ock 4
Block 5 Bl ock 6
17
Motherboard Manual
RAID 1:
Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1
array system. The mirrored (backup) copy of the data can reside on the same disk or on
a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if
the active volume or drive is corrupted or becomes unavailable because of a hardware
failure.
RAID techniques can be applied for high-availability solutions, or as a form of
automatic backup that eliminates tedious manual backups to more expensive and less
reliable media.
Features and Benefits
Drives: Minimum 2, and maximum is 2.
Uses: RAID 1 is ideal for small databases or any other application that
requires f ault tolerance and minimal capacity.
Benefits: Prov ides 100% data redundancy. Should one driv e f ail, the
controller switches to the other drive.
Drawbacks: Requires 2 driv es for the storage space of one driv e.
Perf ormance is impaired during driv e rebuilds.
Fault Tolerance: Yes.
Block 1 Block 1
Block 2 Block 2
Block 3 Block 3
18
K8M800 Micro A M2
You will see the following window after you insert the CD
The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you ins ert the Driver CD, please use file brows er to
locate and execute the file SETUP.EXE under your optical drive.
A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat R eader to open the manual file. Pleas e download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep 2.html
19
Motherboard Manual
In this Case, please follow the procedure below to restore the BIOS:
1. Make a bootable floppy disk.
2. Download the Flash Utility “AWDFLASH.exe” from the Biostar
website: www.biostar.com.tw
3. Confirm motherboard model and download the respectively BIOS
from Biostar website.
4. Copy “AWDFLASH.exe” and respectively BIOS into floppy disk.
5. Insert the bootable disk into floppy drive and press Enter.
6. System will boot-up to DOS prompt.
7. Type “Awdflash xxxx.bf/sn/py/r” in DOS prompt.
(xxxx means BIOS name.)
8. System will update BIOS automatically and restart.
9. The BIOS has been recovered and will work properly.
20
K8M800 Micro A M2
B. CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.
21
Motherboard Manual
5.4 TROUBLESHOOT ING
Probable Solution
1. No power to the system at all 1. Make sure power cable is
Power light don’t illuminate, f an securely plugged in.
inside power supply does not turn 2. Replace cable.
on. 3. Contact technical support.
2. Indicator light on key board does
not turn on.
System inoperativ e. Keyboard lights Using even pressure on both ends of
are on, power indicator lights are lit, the DIMM, press down firmly until the
and hard driv e is spinning. module snaps into place.
System does not boot from hard disk 1.Check cable running from disk to
driv e, can be booted f rom optical driv e. disk controller board. Make sure
both ends are securely plugged
in; check the driv e type in the
standard CMOS setup.
2. Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
System only boots f rom optical driv e. 1. Back up data and applications
Hard disk can be read and applications f iles.
can be used but booting from hard disk 2. Ref ormat the hard driv e.
is impossible. Re-install applications and data
using backup disks.
Screen message says “Invalid Rev iew system’s equipment. Make sure
Conf iguration” or “CMOS Failure.” correct inf ormation is in setup.
Cannot boot system after installing 1. Set master/slave jumpers
second hard driv e. correctly.
2. Run SETUP program and select
correct driv e types. Call the drive
manuf acturers f or compatibility
with other drives.
22
K8M800 Micro A M2
CHAPTER 6: WARPSPEEDER™
23
Motherboard Manual
2. When you see the following dialog in setup procedure, it means setup
is completed. If the “Launch the WarpSpeeder Tray Utility” checkbox
is checked, the Tray Icon utility and [WarpSpeeder™] utility will be
automatically and immediately launched after you click “Finish”
button.
Usage :
The following figures are just only for reference, the screen printed in
this user manual will change according to your motherboard on hand.
24
K8M800 Micro A M2
6.4 WARPSPEEDER™
1. Tray Icon:
Whenever the Tray Icon utility is launched, it will display a little tray
icon on the right side of Windows Taskbar.
25
Motherboard Manual
2. Main Panel
If you click the tray icon, [WarpSpeeder™] utility will be invoked.
Please refer to the following figure; the utility’s first window you will
see is Main Panel.
Main Panel contains fe ature s as follows:
a. Display the CPU Speed, CPU external clock, Memory clock, AGP clock,
and PCI clock information.
b. Contains About, Voltage, Overclock, and Hardware Monitor Buttons for
invoking respective panels.
c. With a user-friendly Status Animation, it can represent 3 overclock
percentage stages:
Man walking →overclock percentage from 100% ~ 110 %
Panther running →overclock percentage from 110% ~ 120%
Car racing →overclock percentage from 120% ~ above
26
K8M800 Micro A M2
3. Voltage Panel
Click the Voltage button in Main Panel, the button will be highlighted
and the Voltage Panel will slide out to up as the following figure.
In this panel, you can decide to increase CPU core voltage and
Memory voltage or not. The default setting is “No”. If you want to get
the best performance of overclocking, we recommend you click the
option “Yes”.
27
Motherboard Manual
4. Overclock Panel
Click the Overclock button in Main Panel, the button will be
highlighted and the Overclock Panel will slide out to left as the
following figure.
28
K8M800 Micro A M2
c. “Auto-overclock button”: User can click this button and
[WarpSpeeder™] will set the best and stable performance and
frequency automatically. [WarpSpeeder™] utility will execute a
series of testing until system fail. Then system will do fail-safe
reboot by using Watchdog function. After reboot, the
[WarpSpeeder™] utility will restore to the hardware default
setting or load the verified best and stable frequency according
to the Recovery Dialog’s setting.
d. “Verify button”: User can click this button and [WarpSpeeder™]
will proceed a testing for current frequency. If the testing is ok,
then the current frequency will be saved into system registry. If
the testing fail, system will do a fail-safe rebooting. After reboot,
the [WarpSpeeder™] utility will restore to the hardware default
setting or load the verified best and stable frequency according
to the Recovery Dialog’s setting.
Note:
Because the testing programs, invoked in Auto-overclock and Verify,
include DirectDraw, Direct3D and DirectShow tests, the DirectX 8.1 or
newer runtime library is required. And please make sure y our display
card’s color depth is High color (16 bit) or True color( 24/32 bit ) that is
required f or Direct3D rendering.
29
Motherboard Manual
6. About Panel
Click the “about” button in Main Panel, the button will be highlighted
and the About Panel will slide out to up as the following figure.
In this panel, you can get model name and detail information in hints
of all the chipset that are related to overclocking. You can also get
the mainboard’s BIOS model and the Version number of
[WarpSpeeder™] utility.
Note :
Because the overclock, overvoltage, and hardware monitor features
are controlled by several separate chipset, [WarpSpeeder™] divide
these features to separate panels. If one chipset is not on board, the
correlative button in Main panel will be disabled, but will not interfere
other panels’ functions. This property can make [WarpSpeeder™]
utility more robust.
30
K8M800 Micro A M2
31
Motherboard Manual
Sockel AM2
CPU Unterstützt Hyper Transport und Cool’n’Quiet
AMD Sempron Prozessoren
K8M800
Chipsatz
VT8237R+
DDR2 DIMM-Steckplätze x 2
Dual-Kanal DDR2 Speichermodul
Arbeitsspeich Jeder DIMM unterstützt 256/512MB &
Unterstützt DDR2 400 / 533 / 667 registrierte DIMMs.
er 1GB DDR2.
ECC DIMMs werden nicht unterstützt.
Max. 2GB Arbeitsspeicher
Integrierter IDE-Controller
Master-Modus
Realtek RTL8201CL
LAN Auto-Negotiation
10 / 100 Mb/s
AGP-Steckplatz x1
Steckplätze
PCI-Steckplatz x2
32
K8M800 Micro A M2
Spezifikationen
System-Lüfter-Sockel x1 System-Lüfter-Stromversorgungsanschluss
"CMOS löschen"-Sockel x1
Stromanschluss (20-polig) x1
Stromanschluss (4-polig) x1
PS/2-Tastatur x1
PS/2-Maus x1
Druckeranschluss x1
Rückseiten-E VGA-Anschluss x1
/A Serieller Anschluss x1
LAN-Anschluss x1
USB-Anschluss x4
Audioanschluss x3
Platinengröße
197 mm (B) X 243 mm (L)
.
Sonderfunkti
Unterstützt RAID 0 / 1
onen
33
Motherboard Manual
FRANCE
SPEC
Socket AM2
UC Prend en charge Hyper Transport et Cool’n’Quiet
Processeurs AMD Sempron
Mémoire Chaque DIMM prend en charge des DDR2 Prend en charge la DDR2 400 / 533 / 667
principale de 256/512 Mo et 1Go Les DIMM à registres et DIMM sans code correcteurs
Capacité mémoire maximale de 2 Go d'erreurs ne sont pas prises en charge
IDE Mode principale de Bus Ultra DMA 33 / 66 / Prend en charge le mode PIO 0~4,
100 / 133
Fente AGP x1
Fentes
Fente PCI x2
34
K8M800 Micro A M2
SPEC
Connecteur Audio du panneau avantx1 x1 Prend en charge la fonction audio du panneau avant
Connecteur d'alimentation x1
(20 broches)
Connecteur d'alimentation x1
(4 broches)
Clavier PS/2 x1
Souris PS/2 x1
Port série x1
E/S du
Port d'imprimante x1
panneau
arrière Port VGA x1
Port LAN x1
Port USB x4
Fiche audio x3
Dimensions
197 mm (l) X 243 mm (H)
de la carte
Fonctionnali
tés Prise en charge RAID 0 / 1
spéciales
35
Motherboard Manual
IT ALIAN
SPECIFICA
Socket AM2
CPU Supporto di Hyper Tra nsport e Cool’ n’Quiet
Processori AMD Sempro n
IDE Modalità Bus Master Ultra DMA 33 / Supporto modalità PIO Mode 0- 4
66 / 100 / 133
SATA Velocità di trasferimento dei dati fi no Compatibile specifiche SATA Versione 1.0.
a 1.5 Gb/s.
Codec
ALC655/ALC658 Uscita audio 6 ca nali
audio
Alloggio AGP x1
Alloggi
Alloggio PCI x2
36
K8M800 Micro A M2
SPECIFICA
Connettore alimentazione x1
(20 pin)
Connettore alimentazione x1
(4 pi n)
Tastiera PS/2 x1
Mouse PS/2 x1
Porta seriale x1
I/O
Porta stampante x1
pannello
Porta VGA x1
posteriore
Porta LAN x1
Porta USB x4
Connettore audio x3
37
Motherboard Manual
SPANISH
Especificación
Conector AM2
CPU Soporta las tecnologías Hyper Transport y Cool’n’Quiet
Procesadores AMD Sempron
Conjunto de K8M800
chips VT8237R+
Memoria Cada DIMM admite DDR de 256/512MB y Admite DDR2 de 400 / 533 / 667
principal 1GB No admite DIMM registrados o DIMM no compatibles
Capacidad máxima de memoria de 2GB con ECC
Integrados en el conjunto de chips
Gráficos Memoria máxima de vídeo compartida de 64MB
K8M800
IDE Modo bus maestro Ultra DMA 33 / 66 / 100 Soporte los Modos PIO 0~4,
/ 133
Códecs de
ALC655/ALC658 Salida de sonido de 6 canales
sonido
Ranura AGP X1
Ranuras
Ranura PCI X2
Conectores Conector disco flexible X1 Cada conector soporta 2 unidades de disco flexible
en placa Conector IDE X2 Cada conector soporta 2 dispositivos IDE
38
K8M800 Micro A M2
Especificación
Conector de alimentación X1
(20 patillas)
Conector de alimentación X1
(4 patillas)
Teclado PS/2 X1
Ratón PS/2 X1
Puerto serie X1
Panel
Puerto de impresora X1
trasero de
Puerto VGA X1
E/S
Puerto de red local X1
Puerto USB X4
Conector de sonido X3
Tamaño de
197 mm. (A) X 243 Mm. (H)
la placa
Funciones
Admite RAID 0 / 1
especiales
Soporte de
Biostar se reserva el derecho de añadir o retirar el
sistema Windows 2000 / XP
soporte de cualquier SO con o sin aviso previo.
operativo
39
Motherboard Manual
PORT UGUESE
ESPECIFICAÇÕES
Socket AM2
CPU Suporta as tecnologias Hyper Transport e Cool’n’Quiet
Processadores AMD Sempron
Memória Cada módulo DIMM suporta uma Suporta módulos DDR2 400 / 533 / 667
principal memória DDR2 de 256/512 MB & 1 GB Os módulos DIMM registados e os DIMM ECC são
Capacidade máxima de memória: 2 GB suportados
Placa
Integrada no chipset K8M800 Memória de vídeo máxima partilhada: 64 MB
gráfica
IDE Modo Bus master Ultra DMA 33 / 66 / 100 Suporta o modo PIO 0~4,
/ 133
SATA Velocidades de transmissão de dados até Compatibilidade com a especificação SATA versão 1.0.
1.5 Gb/s.
Codec de
ALC655/ALC658 Saída de áudio de 6 canais
som
Ranhura AGP x1
Ranhuras
Ranhura PCI x2
40
K8M800 Micro A M2
ESPECIFICAÇÕES
Conector de alimentação x1
(20 pinos)
Conector de alimentação x1
(4 pinos)
Teclado PS/2 x1
Rato PS/2 x1
Porta série x1
Entradas/S
Porta USB x4
Tomada de áudio x3
Tamanho
197 mm (L) X 243 mm (A)
da placa
Característi
cas Suporta as funções RAID 0 / 1
especiais
41
Motherboard Manual
POLISH
SPEC
Socket AM2
Procesor Obsługa Hyper Transport oraz Cool’n’Quiet
AMD Sempron Procesory
IDE Ultra DMA 33 / 66 / 100 / 133 Tryb Bus obsługa PIO tryb 0~4,
Master
Kodek
ALC655/ALC658 6 kanałowe wyjście audio
dźwiękowy
Gniazdo AGP x1
Gniazda
Gniazdo PCI x2
42
K8M800 Micro A M2
SPEC
CMOS x1
Klawiatura PS/2 x1
Mysz PS/2 x1
Port szeregowy x1
Port LAN x1
Port USB x4
Gniazdo audio x3
Wymiary
197 mm (S) X 243 mm (W)
płyty
Funkcje
Obsługa RAID 0 / 1
specjalne
Obsluga
Biostar zastrzega sobie prawo dodawania lub
systemu
Windows 2000 / XP odwoływania obsługi dowolnego systemu
operacyjne
operacyjnego bez powiadomienia.
go
43
Motherboard Manual
RUSSIAN
СПЕЦ.
CPU
(центральн Гнездо AM2
Поддержка Hyper Transport и Cool’n’Quiet
ый Процессоры AMD Sempron
процессор)
Поддержка HyperTransport с
FSB
пропускной способностью до800MГц
Набор K8M800
микросхем VT8237R+
ITE IT8705
Инициативы по охране окружающей среды,
Обеспечивает наиболее используемые
Аппаратный монитор
действующие функциональные
Super I/O Регулятор скорости
возможности Super I/O.
Функция ITE "Smart Guardian" (Интеллектуальная
Интерфейс с низким количеством
защита)
выводов
Максимальная совместно используемая видео
Графика Встроенная в набор микросхем K8M800
память составляет 64 МБ
Встроенное устройство управления Режим "хозяина" шины Ultra DMA 33 / 66 / 100 / 133
IDE
встроенными интерфейсами устройств Поддержка режима PIO 0~4,
Локальная
Realtek RTL8201CL Автоматическое согласование 10 / 100 Мб/с
сеть
Звуковой
ALC655/ALC658 Шестиканальный звуковой выход
кодек
Слот AGP x1
Слоты
Слот PCI x2
44
K8M800 Micro A M2
СПЕЦ.
Контактирующее приспособление
Источник питания для вентилятора системы
вентилятора системы x1
Открытое контактирующее
приспособление CMOS x1
Клавиатура PS/2 x1
Мышь PS/2 x1
Последовательный порт x1
Задняя
панель Порт подключения принтера x1
средств Порт VGA x1
ввода-выв
Порт LAN x1
ода
USB-порт x4
Специальн
ые
технически
Поддержка RAID 0 / 1
е
характерис
тики
45
Motherboard Manual
ARABIC
اﻟﻤﻮاﺻﻔﺎت
ﻓﺘﺤﺔDDR2 DIMMﻋﺪد2
ﻡﺰدوﺝﺔ اﻟﻘ ﻨﺎةDDR2وﺣﺪة ذاآﺮة
ﺱﻌﺔ DDR2ﺗﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮعDIMMﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ
ﺱﻌﺎت 667 / 533 /400ﻡﻴﺠﺎ ﺏﺎﻳﺖDDR2ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ
ﻡﻴﺠﺎ ﺏﺎﻳﺖ و 1ﺝﻴﺠﺎ ﺏﺎﻳﺖ256/512
ECCوﺗﻠﻚ اﻟﺘﻲﻻ ﺗﺘﻮاﻓﻖ ﻡﻊDIMMﻻ ﺗﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة
ﺱﻌﺔ ذاآﺮة ﻗﺼﻮى 2ﺝﻴﺠﺎ ﺏﺎﻳﺖ
ITEﻡﻦ""Smart Guardianوﻇﻴﻔﺔ
ﻡﻴﺠﺎ ﺏﺎﻳﺖ64أﻗﺼﻰ ﺱﻌﺔ ﻟﺬاآﺮة اﻟﻔﻴﺪﻳﻮ اﻟﻤﺸﺘﺮآﺔ K8M800ﻡﺪﻡﺠﺔ ﻓﻲ رﻗﺎﺋﻖ ﺏﻄﺎﻗﺔ اﻟﺮﺱﻮﻡﺎت
ﻡﺘﻜﺎﻡﻞIDEﻡﺘﺤﻜﻢ
PIO Mode 0~4دﻋﻢ وﺿﻊ Ultra DMA 33 / 66 / 100 / 133ﻥﺎﻗﻞ ﺏﺘﻘﻨﻴﺔ ﻡﻨﻔﺬ IDE
وﺿﻊ رﺋﻴﺴﻲ
ﻡﺘﻜﺎﻡﻞSerial ATAﻡﺘﺤﻜﻢ
1.0.اﻹﺹﺪارSATAﻡﻄﺎﺏﻘﺔ ﻟﻤﻮاﺹﻔﺎت SATA
ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺏﺴﺮﻋﺎت ﺗﺼﻞ إﻟﻰ 1.5ﺝﻴﺠﺎﺏﺖ/ﺙﺎﻥﻴﺔ.
ﻳﺪﻋﻢ ﻡﺤﺮآﻴﻦ ﻟﻸﻗﺮاص اﻟﻤﺮﻥﺔ ﻋﺪد 1 ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺱﻄﺢ
اﻟﻤﻮاﺻﻔﺎت
ﻳﺪﻋﻢ وﻇﻴﻔﺔ اﻟﺼﻮت ﺏﺎﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ ﻋﺪد 1 ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ
ﺏﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺗﺸﻐﻴﻞ ﺏﺈﺥﻄﺎر أو ﺏﺪون إﺥﻄﺎرBiostar.ﺗﺤﺘﻔﻆ Windows 2000 / XP دﻋﻢ أﻥﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ
47
Motherboard Manual
JAPANESE
仕様
800 MHzのバンド幅までハイパートランスポ
FSB
ートをサポートします
K8M800
チップセット
VT8237R+
DDR2 DIMMスロット x 2
デュアル チャンネルモードDDR2メモリモジュール
各DIMMは 256/512MB & 1GB DDR2をサポ
メインメモリ DDR2 400 / 533 / 667をサポート
ート
登録済みDIMMとECC DIMMはサポートされません
最大メモリ容量2GB
低ピンカウントインターフェイス ITEの「スマートガーディアン」機能
グラフィック
K8M800チップセットに統合 最大の共有ビデオメモリは64MBです
ス
統合IDEコントローラ
ード
統合シリアルATAコントローラ
SATA SATAバージョン1.0仕様に準拠。
最高11.5 Gb/秒のデータ転送速度
サウンド
ALC655/ALC658 6チャンネルオーディオアウト
Codec
AGPスロット x1
スロット
PCIスロット x2
SATAコネクタ x2 各コネクタは1つのSATAデバイスをサポートします
フロントパネルコネクタ x1 フロントパネル機能をサポートします
48
K8M800 Micro A M2
仕様
フロントオーディオコネクタ x1 フロントパネルオーディオ機能をサポートします
CDインコネクタ x1 CDオーディオイン機能をサポートします
S/PDIFアウトコネクタ x1 デジタルオーディオアウト機能をサポートします
CPUファンヘッダ x1 CPUファン電源装置(スマートファン機能を搭載)
システムファンヘッダ x1 システムファン電源装置
CMOSクリアヘッダ x1
各コネクタは2つのフロントパネルUSBポートをサポートし
USBコネクタ x2
ます
電源コネクタ(20ピン) x1
電源コネクタ(4ピン) x1
PS/2キーボード x1
PS/2マウス x1
シリアルポート x1
背面パネル プリンタポート x1
I/O VGAポート x1
LANポート x1
USBポート x4
オーディオジャック x3
Biostarは事前のサポートなしにOSサポートを追加または削
OSサポート Windows 2000 / XP
除する権利を留保します。
2006/07/26
49
K8M800 Micro AM2 BIOS Setup
8 PC Health Status................................................................................................................... 39
9 Frequency/ Voltage Control ................................................................................................. 41
i
K8M800 Micro AM2 BIOS Setup
BIOS Setup
Introduction
This manual discussed Award™ Setup program built into the ROM BIOS. The Setup
program allows users to modify the basic system configuration. This special information is
then stored in battery-backed RAM so that it retains the Setup information when the power
is turned off.
The Award BIOS™ installed in your computer system’s ROM (Read Only Memory) is a
custom version of an industry standard BIOS. This means that it supports AMD processor
input/output system. The BIOS provides critical low-level support for standard devices
such as disk drives and serial and parallel ports.
Adding important has customized the Award BIOS™, but nonstandard, features such as
virus and password protection as well as special support for detailed fine-tuning of the
chipset controlling the entire system.
The rest of this manual is intended to guide you through the process of configuring your
system using Setup.
APM Support
These AWARD BIOS supports Version 1.1&1.2 of the Advanced Power Management
(APM) specification. Power management features are implemented via the System
Management Interrupt (SMI). Sleep and Suspend power management modes are supported.
Power to the hard disk drives and video monitors can be managed by this AWARD BIOS.
ACPI Support
Award ACPI BIOS support Version 1.0 of Advanced Configuration and Power interface
specification (ACPI). It provides ASL code for power management and device
configuration capabilities as defined in the ACPI specification, developed by Microsoft,
Intel and Toshiba.
1
K8M800 Micro AM2 BIOS Setup
PCI Bus Support
This AWARD BIOS also supports Version 2.1 of the Intel PCI (Peripheral Component
Interconnect) local bus specification.
DRAM Support
DDR SDRAM (Double Data Rate Synchronous DRAM) are supported.
Supported CPUs
This AWARD BIOS supports the AMD CPU.
Using Setup
In general, you use the arrow keys to highlight items, press <Enter> to select, use the
<PgUp> and <PgDn> keys to change entries, press <F1> for help and press <Esc> to quit.
The following table provides more detail about how to navigate in the Setup program by
using the keyboard.
Keystroke Function
Up arrow Move to previous item
Down arrow Move to next item
Left arrow Move to the item on the left (menu bar)
Right arrow Move to the item on the right (menu bar)
Move Enter Move to the item you desired
PgUp key Increase the numeric value or make changes
PgDn key Decrease the numeric value or make changes
+ Key Increase the numeric value or make changes
- Key Decrease the numeric value or make changes
Esc key Main Menu – Quit and not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu – Exit
Current page and return to Main Menu
F1 key General help on Setup navigation keys
F5 key Load previous values from CMOS
F7 key Load the optimized defaults
F10 key Save all the CMOS changes and exit
2
K8M800 Micro AM2 BIOS Setup
1 Main Menu
Once you enter Award BIOS™ CMOS Setup Utility, the Main Menu will appear on the
screen. The Main Menu allows you to select from several setup functions. Use the arrow
keys to select among the items and press <Enter> to accept and enter the sub-menu.
!! WARNING !!
The information about BIOS defaults on manual (Figure
1,2,3,4,5,6,7,8,9) is just for reference, please refer to the BIOS
installed on board, for update information.
3
K8M800 Micro AM2 BIOS Setup
Integrated Peripherals
This submenu allows you to configure certain IDE hard drive options and Programmed
Input/ Output features.
PnP/PCI Configurations
This submenu allows you to configure certain “Plug and Play” and PCI options.
PC Health Status
This submenu allows you to monitor the hardware of your system.
Frequency/ Voltage Control
This submenu allows you to change CPU Vcore Voltage and CPU/PCI clock. (However,
this function is strongly recommended not to use. Not properly change the voltage
and clock may cause the CPU or M/B damage!)
4
K8M800 Micro AM2 BIOS Setup
Set User Password
If the Supervisor Password is not set, then the User Password will function in the same
way as the Supervisor Password. If the Supervisor Password is set and the User
Password is set, the “User” will only be able to view configurations but will not be able to
change them.
Upgrade BIOS
This submenu allows you to upgrade bios.
5
K8M800 Micro AM2 BIOS Setup
6
K8M800 Micro AM2 BIOS Setup
Main Menu Selections
This table shows the selections that you can make on the Main Menu.
CGA 80
MONO
7
K8M800 Micro AM2 BIOS Setup
Item Options Description
Halt On All Errors Select the situation in which
No Errors you want the BIOS to stop
All, but Keyboard the POST process and
All, but Diskette notify you.
All, but Disk/ Key
Base Memory N/A Displays the amount of
conventional memory
detected during boot up.
Extended Memory N/A Displays the amount of
extended memory detected
during boot up.
Total Memory N/A Displays the total memory
available in the system.
8
K8M800 Micro AM2 BIOS Setup
3 Advanced BIOS Features
Figure 3: Advanced BIOS Setup
9
K8M800 Micro AM2 BIOS Setup
Boot Seq & Floppy Setup
This item allows you to setup boot seq & Floppy.
Figure 3.1: Boot Seq & Floppy Setup
The Choices: Pri. Master, Pri. Slave, Sec. Master, Sec, Slave, USB HDD0, USB HDD1,
USB HDD2, and Bootable Add-in Cards.
10
K8M800 Micro AM2 BIOS Setup
First/ Second/ Third/ Boot Other Device
These BIOS attempt to load the operating system from the devices in the
sequence selected in these items.
The Choices: Floppy (default), LS120, Hard Disk, SCSI, CDROM, ZIP100,
LAN, Disabled.
Shadow Setup
This item allows you to setup cache & shadow setup.
Figure 3.2: Shadow Setup
11
K8M800 Micro AM2 BIOS Setup
Cache Setup
Figure 3.3: Cache Setup
External Cache
This option enables or disables “Level 2” secondary cache on the CPU, which
may improve performance.
Enabled (default) Enable cache.
Disabled Disable cache.
12
K8M800 Micro AM2 BIOS Setup
CPU Feature
Figure 3.4: CPU Feature
13
K8M800 Micro AM2 BIOS Setup
Virus Warning
This option allows you to choose the VIRUS Warning feature that is used to protect the
IDE Hard Disk boot sector. If this function is enabled and an attempt is made to write to
the boot sector, BIOS will display a warning message on the screen and sound an alarm
beep.
Disabled (default) Virus protection is disabled.
Enabled Virus protection is activated.
Security Option
This option will enable only individuals with passwords to bring the system online and/or
to use the CMOS Setup Utility.
System A password is required for the system to boot and is also
required to access the Setup Utility.
Setup (default) A password is required to access the Setup Utility only.
This will only apply if passwords are set from the Setup main menu.
14
K8M800 Micro AM2 BIOS Setup
APIC Mode
Selecting Enabled enables APIC mode reporting from the BIOS to the operating system.
The Choices: Enabled (default), Disabled
15
K8M800 Micro AM2 BIOS Setup
16
K8M800 Micro AM2 BIOS Setup
AGP & P2P Bridge Control
If you highlight the literal “Press Enter” next to the “AGP & P2P Bridge Control” label and then
press the enter key, it will take you a submenu with the following options:
17
K8M800 Micro AM2 BIOS Setup
AGP Driving Value
While AGP driving control item set to “Manual”, it allows user to set AGP driving.
The Choices: DA (default).
18
K8M800 Micro AM2 BIOS Setup
DRAM Configuration
Timing Mode
This item allows you to choose to manually or automatically regulate the DDR
Timing.
The Choices: Auto (default), Manual.
Memory tri-stating
The Choices: Disabled (default), Enabled.
19
K8M800 Micro AM2 BIOS Setup
DDRII Timing Item
The Choices: Disabled (default), Enabled.
20
K8M800 Micro AM2 BIOS Setup
LDT & PCI Bus Control
If you highlight the literal “Press Enter” next to the “LDT & PCI Bus Control” label and then
press the enter key, it will take you a submenu with the following options
: Figure 4.3: LDT & PCI Bus Control
21
K8M800 Micro AM2 BIOS Setup
PCI1 Post Write
When enabled, writes to the PCI bus are executed with zero-wait states.
The Choices: Enabled (default), Disabled.
Memory Hole
You can reserve this area of system memory for ISA adapter ROM. When this area is
reserved it cannot be cached. The user information of peripherals that need to use this area
of system memory usually discussed their memory requirements.
The Choices: Disabled (default), 15M –16M.
22
K8M800 Micro AM2 BIOS Setup
5 Integrated Peripherals
Figure 5. Integrated Peripheral
23
K8M800 Micro AM2 BIOS Setup
VIA OnChip IDE Device
If you highlight the literal “Press Enter” next to the “VIA OnChip IDE Device” label and then
press the enter key, it will take you a submenu with the following options:
Figure 5.1: VIA OnChip IDE Device
OnChip SATA
This option allows you to enable the onchip Serial ATA.
The Choices: Enabled (default), Disabled.
SATA Mode
This option allows you to select SATA Mode.
The Choices: IDE, RAID (default).
24
K8M800 Micro AM2 BIOS Setup
IDE Prefetch Mode
The “onboard” IDE drive interfaces supports IDE prefetching for faster drive
access. If the interface does not support prefetching. If you install a primary
and/or secondary add-in IDE interface, set this option to “Disabled”.
The Choices: Enabled (default), Disabled.
25
K8M800 Micro AM2 BIOS Setup
VIA OnChip PCI Device
If you highlight the literal “Press Enter” next to the “VIA OnChip PCI Device” label and then
press the enter key, it will take you a submenu with the following options:
Figure 5.2: VIA OnChip PCI Device
26
K8M800 Micro AM2 BIOS Setup
OnChip USB Controller
This option should be enabled if your system has a USB installed on the system
board. You will need to disable this feature if you add a higher performance
controller.
The Choices: All Enabled (default), All Disabled, 1&2 USB Port, 2&3 USB
Port, 1&3 USB Port, 1 USB Port, 2 USB Port, 3 USB Port.
27
K8M800 Micro AM2 BIOS Setup
Super IO Device
Press Enter to configure the Super I/O Device.
Figure 5.3: Super IO Device
28
K8M800 Micro AM2 BIOS Setup
Parallel Port Mode
The default value is SPP.
The Choices:
SPP (default) Using Parallel Port as Standard Printer Port.
EPP Using Parallel Port as Enhanced Parallel Port.
ECP Using Parallel Port as Extended Capabilities Port.
ECP+EPP Using Parallel Port as ECP & EPP mode.
29
K8M800 Micro AM2 BIOS Setup
6 Power Management Setup
The Power Management Setup Menu allows you to configure your system to utilize
energy conservation and power up/power down features.
Figure 6: Power Management Setup
ACPI function
This item displays the status of the Advanced Configuration and Power Management
(ACPI).
The Choices: Enabled (default), Disabled.
30
K8M800 Micro AM2 BIOS Setup
Power Management Option
This category allows you to select the type (or degree) of power saving and is directly
related to the following modes:
1.HDD Power Down.
2.Suspend Mode.
There are four options of Power Management, three of which have fixed mode settings
Min. Power Saving
Minimum power management.
Suspend Mode = 1 hr.
HDD Power Down = 15 min
Suspend Mode
The item allows you to select the suspend type under ACPI operating system.
The Choices: Disabled (default), 1 Min, 2 Min, 4 Min, 6 Min, 8 Min, 10 Min, 20 Min, 30
Min, 40 Min, 1 Hour
31
K8M800 Micro AM2 BIOS Setup
Video Off Method
This option determines the manner in which the monitor is goes blank.
V/H SYNC+Blank (default)
This selection will cause the system to turn off the vertical and horizontal
synchronization ports and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS
Initial display power management signaling.
Soft-Off by PWR-BTN
Pressing the power button for more than 4 seconds forces the system to enter the
Soft-Off state when the system has “hung.”
The Choices: Delay 4 Sec, Instant-Off (default).
32
K8M800 Micro AM2 BIOS Setup
For example: If set to “Former-Sts” and AC power is lost when system is live, then after
AC power is restored, the system will automatically power on. If AC power is lost when
system is not live, system will remain powered off.
DPMS
Initial display power management signaling.
The Choices: Stop Grant, PwrOn Suspend.
Figure 6.1:IRQ/Event Activity Detect
33
K8M800 Micro AM2 BIOS Setup
USB Resume from S3
This item allows you to enable or disabled USB resume from S3.
The Choices: Disabled (default), Enabled.
VGA
When set to On, any event occurring at a VGA Port will awaken a system which
has been powered down.
The Choices: Off (default), On.
PCI Master
When set to On, you need a LAN add-on card which supports the power
function. It should also support the wake-up on LAN jump.
The Choices: Off (default), On.
34
K8M800 Micro AM2 BIOS Setup
IRQs Activity Monitoring
Press Enter to access another sub menu used to configure the different wake up
events (i.e. wake on LPT & COMM activity).
Figure 6.1.1: IRQs Activity Monitoring
Primary INTR On
IRQ3 (COM2) Enabled
IRQ4 (COM1) Enabled
IRQ5 (LPT2) Enabled
IRQ6 (Floppy Disk) Enabled
IRQ7 (LPT1) Enabled
IRQ8 (RTC Alarm) Disabled
IRQ9 (IRQ2 Redir) Disabled
IRQ10 (Reserved) Disabled
IRQ11 (Reserved) Disabled
IRQ12 (PS/2 Mouse) Enabled
IRQ13 (Coprocessor) Enabled
IRQ14 (Hard Disk) Enabled
IRQ15 (Reserved) Disabled
35
K8M800 Micro AM2 BIOS Setup
7 PnP/PCI Configurations
This section describes configuring the PCI bus system. PCI, or Personal Computer
Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed
of the CPU itself uses when communicating with its own special components. This section
covers some very technical items and it is strongly recommended that only experienced
users should make any changes to the default settings.
Figure 7: PnP/PCI Configurations
PNP OS Installed
When set to YES, BIOS will only initialize the PnP cards used for the boot sequence
(VGA, IDE, SCSI). The rest of the cards will be initialized by the PnP operating system
like Window™ 95. When set to NO, BIOS will initialize all the PnP cards. For non-PnP
operating systems (DOS, Netware™), this option must set to NO.
The Choices: No (default), Yes.
36
K8M800 Micro AM2 BIOS Setup
Reset Configuration Data
The system BIOS supports the PnP feature which requires the system to record which
resources are assigned and protects resources from conflict.
Every peripheral device has a node, which is called ESCD. This node records which
resources are assigned to it. The system needs to record and update ESCD to the memory
locations. These locations (4K) are reserved in the system BIOS. If the Disabled
(default) option is chosen, the system‘s ESCD will update only when the new
configuration varies from the last one. If the Enabled option is chosen, the system is forced
to update ESCDs and then is automatically set to the “Disabled” mode.
The above settings will be shown on the screen only if “Manual” is chosen for the
resources controlled by function.
Legacy is the term, which signifies that a resource is assigned to the ISA Bus and provides
non-PnP ISA add-on cards. PCI / ISA PnP signifies that a resource is assigned to the PCI
Bus or provides for ISA PnP add-on cards and peripherals.
The Choices: Disabled (default), Enabled.
Resources Controlled By
By Choosing “Auto(ESCD)” (default), the system BIOS will detect the system resources
and automatically assign the relative IRQ and DMA channel for each peripheral. By
Choosing “Manual”, the user will need to assign IRQ & DMA for add-on cards. Be sure
that there are no IRQ/DMA and I/O port conflicts.
IRQ Resources
This submenu will allow you to assign each system interrupt a type, depending on the type
of device using the interrupt. When you press the “Press Enter” tag, you will be directed to
a submenu that will allow you to configure the system interrupts. This is only
configurable when “Resources Controlled By” is set to “Manual”.
37
K8M800 Micro AM2 BIOS Setup
PCI / VGA Palette Snoop
Choose Disabled or Enabled. Some graphic controllers which are not VGA compatible
take the output from a VGA controller and map it to their display as a way to provide boot
information and VGA compatibility.
However, the color information coming from the VGA controller is drawn from the palette
table inside the VGA controller to generate the proper colors, and the graphic controller
needs to know what is in the palette of the VGA controller. To do this, the non-VGA
graphic controller watches for the Write access to the VGA palette and registers the snoop
data. In PCI based systems, where the VGA controller is on the PCI bus and a non-VGA
graphic controller is on an ISA bus, the Write Access to the palette will not show up on the
ISA bus if the PCI VGA controller responds to the Write.
In this case, the PCI VGA controller should not respond to the Write, it should only snoop
the data and permit the access to be forwarded to the ISA bus. The non-VGA ISA
graphic controller can then snoop the data on the ISA bus. Unless you have the above
situation, you should disable this option.
Disabled (default) Disables the function.
Enabled Enables the function.
38
K8M800 Micro AM2 BIOS Setup
8 PC Health Status
Figure 8: PC Health Status
Shutdown Temperature
This item allows you to set up the CPU shutdown Temperature.
The Choices: 70℃/ 158℉, 75℃/ 167℉, 80℃/ 176℉, 85℃/ 185℉(default)
CPU Temperature
Show you the CPU temperature.
39
K8M800 Micro AM2 BIOS Setup
SYS FAN Speed
This field displays the speed of the SYSTEM fan.
40
K8M800 Micro AM2 BIOS Setup
9 Frequency/ Voltage Control
Figure 9: Frequency/ Voltage Control
CPU Vcore
The Choices: Default (default), +0.15V, +0.10V, +0.05V.
DDR Voltage
This item allows you to select DDR Voltage.
The Choices: 1.95V (default), 2.05V, 2.15V, 2.25V.
Spread Spectrum
This item allows you to enable/disable the Spread Spectrum function.
The Choices: Enabled (default), Disabled
41
K8M800 Micro AM2 BIOS Setup
CPU CLOCK
This item allows you to select CPU Clock, and CPU over clocking
The Choices: 200Mhz (default), Disabled.
Min= 200
Max= 232
Key in a DEC number.
Special Notice:
If unfortunately, the system’s frequency that you are selected is not
functioning, there are two methods of booting-up the system.
Method 1:
Clear the COMS data by setting the JCOMS1 ((2-3) closed)) as “ON” status.
All the CMOS data will be loaded as defaults setting.
Method 2:
Press the <Insert> key and Power button simultaneously, after that
keep-on pressing the <Insert> key until the power-on screen showed.
This action will boot-up the system according to FSB of the processor.
It’s strongly recommended to set CPU Vcore and clock in default setting. If the CPU
Vcore and clock are not in default setting, it may cause CPU or M/B damage.
42