Documente Academic
Documente Profesional
Documente Cultură
Details should be shown on drawing sheets that are appropriate to the main drawing. If
there is no room for the detail, details should be placed on a separate detail sheet or
placed on other drawings to maximize the space on the sheet. Details are created using a
scale of 1” = 1’-0”. Insert the details on the Layout tabs using a scale factor of 1/12. To
add leaders use the Multileader command and set the style to LEADER DETAILS-12. To add
dimensions set the Dimension style to ARCHITECTURAL DETAILS-12.
Basement Plan: Chimney Detail, Pilaster Detail, Beam Detail, Column Base Detail,
Footing Detail
Floor Plan: Sill Detail, Exterior Wall Detail, Interior Wall Detail
Elevations: Eave Detail, Ridge Detail
Site Plan: Concrete Walkway Detail, Handrail Detail, Concrete Stair Detail, Shrub Detail,
Tree Detail
1
calculations)
Indicate and call out Sheathing material and thickness where applicable
Indicate and call out finished roofing
Indicate the slope triangle
Indicate and call out ridge (modify size to match structural calculations)
2
ARCHITECTURAL DRAWING
DETAIL AND SECTION DRAWINGS CHECKLIST