Sunteți pe pagina 1din 28

CRF_NAME VERSION VERSION_DESCRIPTION

DM002 v3.0 pravin comments


REVISION_NOTES
section added
SECTION_LABEL SECTION_TITLE
DEMO Demographics
Lab Lab
SUBTITLE INSTRUCTIONS PAGE_NUMBER
PARENT_SECTION BORDERS
GROUP_LABEL GROUP_HEADER GROUP_REPEAT_NUMBER GROUP_REPEAT_MAX
DOB Date of birth
LAB Lab Values
ITEM_NAME DESCRIPTION_LABEL

DOB Date of birth


VST Visit
SEX Sex

ETY Ethnicity
RCE Race
OTHR Others

BLCT RBC
LEFT_ITEM_TEXT UNITS RIGHT_ITEM_TEXT

Date of birth MM-DD-YY Please provide the date of birth of the subject
Record the date of this visit
Record the appropriate sex

Ethnicity( as reported by subject)


Race(as reported by subject)
If others please specify
normal value-5.6 (male),normal value-5.1
RBC Count M/µl (female)
SECTION_LABEL GROUP_LABEL HEADER

DEMO
DEMO
DEMO

DEMO
DEMO

Lab HEMATOLOGY
SUBHEADER PARENT_ITEM COLUMN_NUMBER PAGE_NUMBER

1
1
1
Study participants should self-report
race and ethnicity whenever feasible,
with ethnicity being asked about
before race. 1
1
1

RED BLOOD CELLS


QUESTION_NUMBER RESPONSE_TYPE RESPONSE_LABEL RESPONSE_OPTIONS_TEXT

text date date


text date date
single-select sex Male, Female

single-select ethnicity Hispanic or Latino, Not Hispanic or L


checkbox race American Indian or Alaskan Native, As
text other race text

text count
RESPONSE_VALUES_OR_CALCULATIONS RESPONSE_LAYOUT

date horizontal
date horizontal
1,2

1,2,3,4
1,2,3,4,5,6
text horizontal

horizontal
DEFAULT_VALUE DATA_TYPE WIDTH_DECIMAL

DATE
DATE
INT

(select one) INT


INT
ST

ST 2
VALIDATION
VALIDATION_ERROR_MESSAGE

Please enter the subject’s Date of Birth in the DD-MMM-YYYY format. If Birth Day is unknown please enter Date of Birth in M

Please check on either male or female


PHI REQUIRED

0 1
0 1
0 1

0 1
0 1
0 0

1 1
OpenClinica CRF Design Template
Version: 3.0

Worksheet Field

CRF

CRF_NAME

VERSION

VERSION_DESCRIPTION

REVISION_NOTES

Sections

SECTION_LABEL

SECTION_TITLE

SUBTITLE

INSTRUCTIONS

PAGE_NUMBER

PARENT_SECTION

BORDERS
Groups

GROUP_LABEL

GROUP_HEADER

GROUP_REPEAT_NUM
GROUP_REPEAT_MAX
Items

ITEM_NAME

DESCRIPTION_LABEL
LEFT_ITEM_TEXT

UNITS

RIGHT_ITEM_TEXT

SECTION_LABEL

GROUP_LABEL

HEADER

SUBHEADER

PARENT_ITEM

COLUMN_NUMBER

PAGE_NUMBER

QUESTION_NUMBER
RESPONSE_TYPE

RESPONSE_LABEL

RESPONSE_OPTIONS_TEXT

RESPONSE_VALUES_OR_CALCULATIONS
RESPONSE_LAYOUT

DEFAULT_VALUE

DATA_TYPE
WIDTH_DECIMAL

VALIDATION

VALIDATION_ERROR_MESSAGE
PHI

REQUIRED
Validation Expressions
Expression Type
regexp

func
Field Description and Instructions

Enter the name of your case report form (CRF) here. It must be between 1 and 255 characters long. This is a
required field.
Enter the name of this version of the case report form (CRF) here. It must be between 1 and 255 characters
long. This is a required field.
Enter a description of this version of the case report form (CRF) here. It must be between 1 and 3999
characters long.
Enter revision notes for this version of the case report form (CRF) here. The revision notes must be between
1 and 255 characters long.

Enter a label for each section of the CRF. It must be between 1 and 255 characters long, and can have
spaces. Each section must have a valid section_label, and the CRF must have at least one section. Each
item in the CRF must be assigned to a section.
Enter a name for each section of your case report form (CRF) here. It must be between 1 and 2000
characters long. This is a required field.
Enter a subtitle and/or header text that should be shown at the top of the section. It must be between 1 and
2000 characters long. This field is optional.
In addition to a subtitle for the section, you may add instructions to show at the top of the section. The
instructions must be between 1 and 2000 characters long. This field is optional.
Enter the page number on which the section begins. If you are using paper source documents and have a
multi-page CRF, you may put in the printed page number. May be letters or numbers, 1 to 5 characters long.
This field is optional.
You may create sub-sections in OpenClinica CRFs by naming a parent section. To do so, enter the
section_label of the parent section that this section is a part of. The value must be a valid section_label from
this document. This field is optional.
If set to 1, borders (aka gridlines) will be turned on for all items in this section that are part of a group. If 0 or
blank, no borders around items will be generated (note: even when borders are off OpenClinica will still
generate borders to delineate header information and major components of the form).

This is the name of the group and must be between 1 and 255 characters long. This is only a required field
for grouped items. Ungrouped items should be left blank.
In a horizontal table, the header name that will appear in bold at the top of a column. If left blank, nothing will
be in its place. There is a 255 character limit for this field.
When the CRF is generated, grouped items will display as a row within a table. The repeat number is the
number of instances the row will repeat when initially generated. If left blank, it is assumed the initial
repetition is 1.
Specify the maximum number of times the group can repeat. If left blank, the limit will be forty.

Enter the Item Name. This is the unique label or variable name for this data element and should be letters
and numbers and no spaces. It should be 1 to 255 characters long. This field is required and must be unique
within the spreadsheet.
Enter a description or definition for this item. The description should give an explanation of the data element
and the value(s) it captures. It is not shown on the CRF but is in the data dictionary. It should be 1 to 4000
characters long. It is required.
Enter the text that should appear to the left of the input on the CRF data entry form. This may be similar to
the Description_Label, but phrased in the context of asking a question on the form. It should be 1 to 2000
characters long. This is an optional field.
Enter the units that the value of this data element should be captured in. The units will appear to the right of
the input field on the data entry form. It should be 1 to 64 characters long. It is not required.
Enter the text that should appear to the right of the input (after units) on the CRF data entry form. It may
include supplementary information or example values to guide the user. It should be 1 to 2000 characters
long. It is not required.
You must assign each item in a CRF to a section. To do so, enter the section_label of the section to which
this item belongs. The value must be a valid section_label from this document. This field is required unless a
parent_item is specified. The SECTION_LABEL corresponding to the section within which the question is
located. (if different from parent question)

Enter the group label to which this item belongs. The value must be a valid Group_Label from the 'Groups'
worksheet. This field is only required for items that will be assigned to a group.For ungrouped items, this field
should be left blank.
Enter header, introductory, or instructive text that should be shown on top of the question. It must be between
1 and 2000 characters long. This field is optional.
Enter sub-header, introductory, or instructive text that should be shown on top of the question but under the
question header text. It must be between 1 and 240 characters long. This field is optional.
Enter the item_name of the parent question. This will cause the child_item to show up indented to the right of
the parent item's place in the CRF. The value bue be a valid item from this document with the same
section_label. This field is optional.

You may allow adjacent items or items with the same parent to be aligned together. To do so enter a column
number for the item. For example, consecutive items with column numbers 1 & 2 will appear on the same
row. This field is optional. IMPORTANT NOTE: IF YOU PLAN ON PRINTING THE CRF ON PAPER, DO
NOT GO PAST 4 COLUMNS. OTHERWISE THE 5TH OR HIGHER COLUMNS WILL BE CUT OFF.
Enter the page number of the item. If you use paper source documents and have a multi-page CRF, you may
put in the printed page number. OpenClinica will create anchor links in the CRF. May be letters or numbers, 1
to 5 characters long, and is optional.
Enter the question number. It will appear to the left of the left_item_text on the CRF data entry form. It may be
1 to 20 characters long, any characters. It is optional.
Provide the input type of the form field for this item.
text: a text input field which will display as a single line of text. This input field will allow for 255 characters.
textarea: a text input field which will display as a box which will display several lines of text (e.g. a comments
box). This input field will allow for 255 characters.
single-select: a drop-down menu with a list of available options. This input field will allow a user to select one
of the available response options.
radio: an html radio button. This input will display each available response option with a button next to it. A
user is allowed to select only one of the available response options.
multi-select: a drop-down menu with a list of available options. This input field will allow a user to make
multiple selections from the list of available response options by holding Ctrl and clicking on the appropriate
responses.
checkbox: This will display all of the available response options with a checkbox next to each. A user can
make multiple selections (i.e. Check all that apply).
calculation: is for fields which will contain a derrived value.
group-calculation: is for fields which will contain a derrived values from Grouped items.
file: is for fields that will allow the user to upload a file which will be stored on a specified directory.

Create a custom label associated with a response set. This label must be defined once and may be reused
by other items with the same responses (eg Yes, No). Must be alphanumeric, 1 to 80 characters long, and is
required for each unique response set. Text and Textarea RESPONSE_TYPES should not share a
RESPONSE_LABEL
Enter a list of the text values of the responses for this response set as a comma-delimited string. Must be 1 to
4000 characters long. It is required for each unique response label but not for previously used response
labels.

RESPONSE VALUES:
Enter a comma-delimited list of the encoded values that are answers to this question, in the same order as
their corresponding text values in RESPONSE_OPTIONS_TEXT. Must be 1 to 4000 characters long. Only
required for each unique response label.
CALCULATIONS:
For fields wich will will contain a calculation, the expression should be written here. For more information on
Calculations within a CRF please see: http://www.openclinica.org/dokuwiki/doku.php?
id=ocfunctionality:crf_calculations

Specify the layout for checkboxes and radio buttons.


Default text for RESPONSE_OPTIONS_TEXT of single-selected RESPONSE_TYPE. If the
RESPONSE_TYPE is radio, default values will not be supported.

Enter the data type of this item. You must enter a valid data type from the following list. Partial Date will allow
the data entry person to select a Month and Year or just a Year and not require the Day.
You can define the width (the length of the field) and the number of decimal places to use for the field. The
first characters will define the width of the field. After the width is defined you can define the number of
decimal places for the field. Decimal places is defined by the character between two parentheses (). This
should only be used for items with the ST, INT or REAL data types. Here are a few examples.
8(3) – This means the field can be a
maximum of 8 characters long with only 3 decimal places
w(4) – This allows the maximum length of a field according to OpenClinica, which is 32, and round to the 4th
decimal place.
20(d) – This allows a maximum length of 20 and the decimal will be set 4 which is the default within
OpenClinica. This would be used for a ST or INT field because there will be no decimals.

Enter a validation expression to run an edit check on this item at the point of data entry. The validation will
run when the user hits 'save'. If the user has entered data which satisfy the needs of the validation, no action
will happen. If the value entered does not meet the requirements of the validation, an error message will
appear (i.e., the VALIDATION_ERROR_MESSAGE). The validation should be of the format "expressionType:
expression". Must be between 1 and 1000 characters and is an optional field.
If you entered a Validation Function, enter the error message that should appear if an entered value does not
satisfy the validation criteria. Must be between 1 and 255 characters. This field is required if a Validation
Function exists for the item.
Enter 1 if this field contains PHI (Protected Health Information), or 0 if otherwise.

Enter 1 if this field is required (eg a value must be entered for user to complete the CRF), or 0 if otherwise.

Expression Syntax
regexp: /regular expression/

Supports Java-style regular expressions (similar to Perl). For more information, see
http://java.sun.com/j2se/1.4.2/docs/api/java/util/regex/Pattern.html
func: func(args)

Supports built-in library of basic integer functions. Currently supported functions include:
(1) greater than - gt(int) or gt(real)
(2) less than - lt(int) or lt(real)
(3) range - range(int1, int2) or range(real1, real2)
(4) gte(int) or gte(real)
(5) lte(int) or lte(real)
(6) ne(int) or ne(real)
(7) eq(int) or eq(real)
Allowable Values Required

Text
Y
Text
Y
Text
Y
Text
Y

Alphanumeric text, no spaces

Y
Text
Y
Text
N
Text
N
Text

N
Text

N
0 or 1

Text
Y
Text
N
A number (e.g. 1, 2, 3).

N
A number. N

Alphanumeric text, no spaces

Y
N

N
Must be the
SECTION_LABEL of a section
defined in 'Sections'
worksheet Y
Must be the GROUP_LABEL
of a section defined in
'Groups' worksheet

N
text
textarea
single-select
radio
multi-select
checkbox
calculation
group-calculation file

Y
Alphanumeric text, no spaces

Comma-delimited list of
values
N
Comma-delimited list of
values

N
Horizontal or Vertical N

N
ST - Character String
INT - Integer
REAL - Floating
DATE - Date
PDATE - Partial Date FILE
- File
Y
N

N
0 or 1 Y
blank, 0 or 1
Y

Example
regexp: /[A-Z]{3}/
This example requires a three-
letter string (all uppercase)

func: range(1, 10)


This example requires a
number between 1 and 10

S-ar putea să vă placă și