Documente Academic
Documente Profesional
Documente Cultură
Last but not least great big thanks goes to my parents who have given immense support
in one way or another contributed to the success of this project. Not forgetting also great
big thanks to those who had assisted me in completing my training directly or indirectly.
I would like to express my utmost gratitude to my supervisors Khalil Shehabuddeen and
Colin Lobo for their supervisory skills and guidance which made the completion of this
training successful. It was a privilege to be under their supervision. Their availability,
time and support have been invaluable to me.
My sincere appreciation also goes to my UTP supervisors, Dr. Rao and Dr. Setyamartana,
who has given me support during my training.
First of all, I would like to thank my host company, PETRONAS Research Sdn Bhd
(PRSB for the opportunity to undergo 32 weeks of Industrial Internship Training Program
(IITP) as a requirement for my degree program. I would also like to express my deepest
appreciation to the staff of PRSB whom were involved in my IITP, especially to my
supervisor Pn Zahidah Md Zain who has tirelessly supervised and guided me throughout
my IITP period. Not to forget her kind support and assistance during my presentation and
report. Special thanks to all technicians and my colleagues for their kind support and
advice throughout the 32 weeks. I would also like to my appreciation to those who were
involved directly and indirectly to assure the success of my IITP program. Although I am
unable to personally thank all of the persons involved, the following are a list of people
who I would like to extend my deepest gratitude:
Last but not least great big thanks goes to my parents who have given
immense support
in one way or another contributed to the success of this project. Not
forgetting also great
big thanks to those who had assisted me in completing my training
directly or indirectly.
I first set my foot in PETRONAS Carigali Sdn. Bhd., Sarawak Operations and was
greeted by the BME/Rotating Acting Head at that time, Mr. Sura Venkata Srikanth. He
has been a very busy man, tangled up in his work, troubleshooting problems with all the
rotating equipments, and yet, he still has time to cater for my training schedule and
development as a trainee engineer. From time to time, he would test my understandings
on the design and operation of rotating equipments by asking instantaneous questions. I
would also like to acknowledge the contributions of the rotating engineers, Mr. Arif
Ibrahim and Mr. Nizam Nadzimuddin, who have always been eager to teach and inspire
myself to be a dedicated engineer. They have shown great ability in absorbing knowledge
and practicing skills in the discipline of rotating equipments. With their abilities and
aptitudes, there is no doubt that they will become expert in rotating equipments one of
these days. Many thanks as well to our boss in BME/Rotating, Mr. Azizol that have been
an inspiring leader and understanding principal. Not to forget the continuous assistance
by Mr. Hardi Hazizie, rotating engineer and Mr. Ganesh Doresamy, rotating planner, that
have been very supportive in assisting me in resolving emerging issues and acquiring
essential information. I would also like to recognize the contributions by my mentors in
vibration analysis, Mr. Hishamuddin, Mr. Syarifuddin and Mr. Wan Syahril. Their
unremitting lessons in vibration have helped me in developing my abilities and add to my
skills. With cherry on top, I would like to once again convey my numerous thanks and
gratitude upon the contribution that these men have put in through my internship training
programme. Thank You. MOHD RADZI MOHD ANUA