Documente Academic
Documente Profesional
Documente Cultură
Product Specification
Title
BUYER MODEL Philips -
*When you obtain standard approval, please use the above model name without suffix
APPROVED BY /
SIGNATURE DATE
SIGNATURE DATE
Please return 1 copy for your confirmation with your signature and comments.
Ver. 0.2
1 / 28
Product Specification
CONTENTS
Number
COVER CONTENTS RECORD OF REVISIONS 1 2 3 3-1 3-2 3-3 3-4 3-5 3-6 4 5 6 7 7-1 7-2 8 8-1 8-2 9 9-1 9-2 9-3 9-4 9-5 9-6 GENERAL DESCRIPTION ABSOLUTE MAXIMUM RATINGS ELECTRICAL SPECIFICATIONS ELECTRICAL CHARACTERISTICS INTERFACE CONNECTIONS SIGNAL TIMING SPECIFICATIONS SIGNAL TIMING WAVEFORMS COLOR INPUT DATA REFERENCE POWER SEQUENCE OPTICAL SPECIFICATIONS MECHANICAL CHARACTERISTICS RELIABILITY INTERNATIONAL STANDARDS SAFETY EMC PACKING DESIGNATION OF LOT MARK PACKING FORM PRECAUTIONS MOUNTING PRECAUTIONS OPERATING PRECAUTIONS ELECTROSTATIC DISCHARGE CONTROL PRECAUTIONS FOR STRONG LIGHT EXPOSURE STORAGE HANDLING PRECAUTIONS FOR PROTECTION FILM
ITEM
Page
1 2 3 4 5 6 6 8 12 13 14 15 17 21 24 25 25 25 26 26 26 27 27 27 28 28 28 28
Ver. 0.2
2 / 28
Product Specification
RECORD OF REVISIONS
Revision No
0.1 0.2
Revision Date
Jan. 28, 2004 Mar. 12, 2004
Page
Update
Description
Preliminary Specification(First Draft)
Ver. 0.2
3 / 28
Product Specification
1. General Description
The LC320W01 is a Color Active Matrix Liquid Crystal Display with an integral External Electrode Fluorescent Lamp(EEFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive display type which is operated in the normally black mode. It has a 31.51 inch diagonally measured active display area with WXGA resolution (768 vertical by 1366 horizontal pixel array) Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the luminance of the sub-pixel color is determined with a 8-bit gray scale signal for each dot, Therefore it can present a palette of more than 16.7M(true) colors. It has been designed to apply the 8Bit 1 port LVDS interface. It is intended to support LCD TV, PCTV where high brightness, super wide viewing angle, high color gamut, high color depth and fast response time are important.
RGB(Mini-LVDS)
+12.0V LVDS
5pair
G1
Timing Controller
CN1
(30pin)
Option #9
Inverter (CN2,CN3)
General Features
Active Screen Size Outline Dimension Pixel Pitch Pixel Format Color Depth Luminance, White Viewing Angle (CR>10) Power Consumption Weight Display Operating Mode Surface Treatment 31.51 inches(800.4mm) diagonal 760.0 mm(H) x 450.0 mm(V) x 48.0 mm(D) (Typ.) 170.25 x 510.75 x RGB 1366 horiz. by 768 vert. pixels RGB stripe arrangement 8bit, 16,7 M colors 500 cd/m2 (Center 1 point) (Typ.) Viewing angle free ( R/L 176(Typ.), U/D 176(Typ.)) Total 88.7Watt (Typ.) (Logic=4.7W, Lamp=84.0W [IBL=93mA] ) 7,200 g (Typ.) Transmissive mode, normally black Hard coating(3H), anti-glare treatment of the front polarizer
Ver. 0.2
4 / 28
Product Specification
Power Input LCM Voltage Backlight inverter ON/OFF Control Voltage Brightness Control Voltage Operating Temperature Storage Temperature Operating Ambient Humidity Storage Humidity
C C
%RH %RH Note 1
Note : 1. Temperature and relative humidity range are shown in the figure below. Wet bulb temperature should be 39 C Max. and no condensation of water.
90% 60 60%
40
40%
Humidity [(%)RH]
50
Storage
Operation
10% 10 20 30 40 50 60 70 80
-20
Ver. 0.2
5 / 28
Product Specification
11.4 -
VDC mA mA Watt A 1 2 1 3
Notes : 1. The specified current and power consumption are under the VLCD=12.0V, 25 2C, fV=60Hz condition whereas mosaic pattern(8 x 6) is displayed and fV is the frame frequency. 2. The current is specified at the maximum current pattern. 3. The duration of rush current is about 2ms and rising time of power input is 1ms (min.).
Mosaic Pattern(8 x 6)
Ver. 0.2
6 / 28
Product Specification
Table 2-2. ELECTRICAL CHARACTERISTICS Parameter Inverter : Power Input Voltage Power Input Current Power Consumption Input Voltage for Control System Signals Lamp : Life Time 50,000
Hrs 3 VBL IBL PBL VBR V on V off
Symbol
Unit
Note
1
1 1 2
5.0 0
5.25 0.5
Note : 1. The specified current and power consumption are under the typical supply Input voltage, 24.0V. Ripple voltage of the Power Input Voltage is under 0.5 Vp-p. Inrush current of the Power Input Current is under +10% of the typical current. 2. Brightness Control.
This VBR Voltage control brightness. VBR Voltage
3.3V 0V
3. Specified values are for a single lamp which is aligned horizontally. The Life Time is determined as the time at which brightness of the lamp is 50% compared to that of initial value at the typical lamp current on condition of continuous operating at 25 2C.
Ver. 0.2
7 / 28
Product Specification
Note: 1. If the Pin 9 is Ground, Interface format is LG, and if the Pin 9 is Vcc(3.3V), Interface format is DISM See page 9 and 10. 2. The pin 30 should be ground, this pin 30 is necessary for LCD module test. 3. All GND(ground) pins should be connected together to the LCD modules metal frame. 4. All VLCD (power input) pins should be connected together. 5. Input Level of LVDS signal is based on the IEA 664 Standard.
Ver. 0.2 Mar. 12, 2004 8 / 28
Product Specification
Table 4. REQUIRED SIGNAL ASSIGNMENT FOR LVDS TRANSMITTER ( Pin9=L or Open )
DS90C385
or Compatible TxOUT0TxOUT0+ 48 47
FI-X30SSL-HF
12 13 100
Timing Controller
RxIN0RxIN0+
TxOUT1TxOUT1+
46 45
15 16
100
RxIN1RxIN1+
TxOUT2TxOUT2+
42 41
18 19
100
RxIN2RxIN2+
TxCLKOUTTxCLKOUT+
40 39
21 22
100
RxCLKINRxCLKIN+
TxOUT3TxOUT3+
38 37
24 25 9 30
100
RxIN3RxIN3+
LG / DISM
LCD Test
Note: 1. The LCD Module uses a 100 Ohm [] resistor between positive and negative lines of each receiver input. 2. Refer to LVDS Transmitter Data Sheet for detail descriptions. (DS90C385 or Compatible) 3. 7 means MSB and 0 means LSB at R,G,B pixel data.
GND
GND
LCD Module
Ver. 0.2
9 / 28
Product Specification
Table 5. REQUIRED SIGNAL ASSIGNMENT FOR LVDS TRANSMITTER ( Pin9=H )
DS90C385
or Compatible TxOUT0TxOUT0+ 48 47
FI-X30SSL-HF
12 13 100
Timing Controller
RxIN0RxIN0+
TxOUT1TxOUT1+
46 45
15 16
100
RxIN1RxIN1+
TxOUT2TxOUT2+
42 41
18 19
100
RxIN2RxIN2+
TxCLKOUTTxCLKOUT+
40 39
21 22
100
RxCLKINRxCLKIN+
TxOUT3TxOUT3+
38 37
24 25 9 30
100
GND
Note: 1. The LCD Module uses a 100 Ohm [] resistor between positive and negative lines of each receiver input. 2. Refer to LVDS Transmitter Data Sheet for detail descriptions. (DS90C385 or Compatible) 3. 7 means MSB and 0 means LSB at R,G,B pixel data.
Vcc
LCD Module
Ver. 0.2
10 / 28
Product Specification
3-2-2. Backlight Inverter - Inverter Connector : S12B-PH-SM3(manufactured by JST) or Equivalent - Mating Connector : PHR-12 or Equivalent Table 6. INVERTER CONNECTOR PIN CONFIGULATION Pin No 1 2 3 4 5 6 7 8 9 10 11 12 Symbol
VBL VBL VBL VBL VBL GND GND GND GND GND VBR On/Off
Description
Power Supply +24.0V Power Supply +24.0V Power Supply +24.0V Power Supply +24.0V Power Supply +24.0V POWER GND POWER GND POWER GND POWER GND POWER GND 0V ~ 3.3V 0V ~ 5.0V
Master
VBL VBL VBL VBL VBL GND GND GND GND GND VBR On/Off
Slave
VBL VBL VBL VBL VBL GND GND GND GND GND Dont care Dont care
Note
2 1
Note : 1. VON : 2.5~5.0V VOFF : -0.3~0.5V 2. Minimum Brightness : VBR = 0.0V Maximum Brightness : VBR = 3.3V 3. GND should be connected to the LCD modules metal frame.
PCB
10 11 12
Ver. 0.2
11 / 28
Product Specification
Symbol
tCLK
Min
12.5 68 1416 45 8 775 47 2 1366 24 24 48 768 4 1 7
Typ
13.8 72.3 1528 47.4 32 790 60 5 1366 80 48 160 768 15 2 22
Max
14.7 80 1776 50 1063 63 1366 -
Unit
ns MHz tCLK
KHz
Remark
tVV tVBP
Note : Hsync Period and Hsync Width should be even number times of tCLK. If the value is odd number times of tCLK, display control signal can be asynchronous. In order to operate the LCD, Hsync, Vsync and DE(Data Enable) signals should be used. 1. The performance of the electro-optical characteristics may be influenced by variance of the vertical refresh rate. 2. Vsync and Hsync should be keep the above specification. 3. Hsync Period, Hsync Width and Horizontal Back Porch should be any times of character number(8).
Ver. 0.2
12 / 28
Product Specification
DCLK
tCLK
0.5 VDD
Invalid data
Pixel 0,0
Pixel 2,0
Invalid data
Invalid data
Pixel 1,0
Pixel 3,0
Invalid data
DE(Data Enable)
DE(Data Enable)
Ver. 0.2
13 / 28
Product Specification
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0 Black Red (255) Green (255) 0 1 0 0 0 1 1 1 Dark 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 ... 1 1 1 1 0 0 1 1 0 0 1 1 0 0 ... 0 0 Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ... 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 0 0 0 0 1 1 0 0 1 1 0 0 1 1 0 0 ... 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 1 1 1 0 0 1 1 0 0 1 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ... 1 1 0 0 1 1 0 0 1 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ... 1 1 1 1 1 1 0 1 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 1 0 0 0 1 1 0 1 1 1 1 0 0 1 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 ... 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 ... 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 0 1 0 0 1 1 1 0 1 1 0 1 1 0 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 ... 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0
Basic Color
Blue (255) Cyan Magenta Yellow White RED (000) RED (001)
RED
GREEN
BLUE
Note : Users should be input true 8 Bit data streams via LVDS transmitter.
Ver. 0.2 Mar. 12, 2004 14 / 28
Product Specification
90%
90% 10%
0V
10%
T1 T2
T5 T6
T7
10%
Valid Data
10%
T3
T4
Notes : 1. Please avoid the floating state of interface signal at invalid period. 2. When the interface signal is invalid, be sure to pull down the power supply VLCD to 0V.
Ver. 0.2
15 / 28
Product Specification
3-6-2. On/Off for Inverter
24V (typ.)
90% 0.7V
10%
T1 T2
T3
T2
Enable (On/Off)
T4 VBr
T4
Remark
After Inverters connected
VBL(Min) x 0.8
Ver. 0.2
16 / 28
Product Specification
4. Optical Specification
Optical characteristics are determined after the unit has been ON and stable for approximately 30Min in a dark environment at 252C. The values are specified at an approximate distance 50cm from the LCD surface at a viewing angle of and equal to 0 . It is presented additional information concerning the measurement equipment and method in FIG. 1. Optical Stage(x,y) LCD Module Pritchard 880 or equivalent
50cm FIG. 1 Optical Characteristic Measurement Equipment and Method Table 11. OPTICAL CHARACTERISTICS
Parameter Contrast Ratio Surface Luminance, white Luminance Variation Response Time Rise Time Decay Time RED GREEN Color Coordinates [CIE1931] BLUE WHITE Viewing Angle (CR>10) x axis, right(=0) x axis, left (=180) y axis, up (=90) y axis, down (=270) Gray Scale r l u d 85 85 85 85 88 88 88 88 6 degree 5 Symbol CR LWH WHITE TrR TrD Rx Ry Gx Gy Bx By Wx Wy Typ -0.03 5P 8 10 0.640 0.343 0.275 0.605 0.145 0.065 0.285 0.293 Typ +0.03 Ta= 252C, VLCD=12.0V, fV=60Hz, Dclk=72.3MHz, VBR=3.3V Value Min 350 400 Typ 500 500 1.3 12 14 ms cd/m2 Max Unit Note 1 2 3 4
Ver. 0.2
17 / 28
Product Specification
Note : 1. Contrast Ratio(CR) is defined mathematically as : Surface Luminance with all white pixels Surface Luminance with all black pixels It is measured at center 1-point. Contrast Ratio = 2. Surface Luminance(LWH) is the luminance value at center 1-point across the LCD surface 50cm from the surface with all pixels displaying white. For more information see the FIG. 2. 3. The variation of surface luminance , WHITE is defined as : WHITE(5P) = Maximum(Lon1,Lon2, Lon3, Lon4, Lon5) / Minimum(Lon1,Lon2, Lon3, Lon4, Lon5) Where Lon1 to Lon5 are the luminance with all pixels displaying white at 5 locations . For more information, see the FIG. 2. 4. Response time is the time required for the display to transition from G(N) to G(M) (Rise Time, TrR) and from G(M) to G(N) (Decay Time, TrD). For additional information see the FIG. 3. (N<M) 5. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the LCD module surface. For more information, see the FIG. 4. 6. Gray scale specification Gamma Value is approximately 2.2. For more information, see the Table 12. Table 12. GRAY SCALE SPECIFICATION Gray Level L0 L15 L31 L47 L63 L79 L95 L111 L127 L143 L159 L175 L191 L207 L223 L239 L255
Ver. 0.2 Mar. 12, 2004
Product Specification
Measuring point for surface luminance & measuring point for luminance variation
H A
B V
A : H / 4 mm B : V / 4 mm
H : 697.685 mm V : 392.256 mm
@ H,V : Active Area
Response time is defined as the following figure and shall be measured by switching the input signal for Gray(N) and Gray(M). % 100 90 Optical Response 10 0 Gray(0) TrR TrD
Gray(0)
Ver. 0.2
19 / 28
Product Specification
Normal
= 90, Up
= 180, Left
= 0, Right
= 270, Down
Ver. 0.2
20 / 28
Product Specification
5. Mechanical Characteristics
The following items provide general mechanical characteristics. In addition, the figures in the next page show the detail information of mechanical drawing for LCD module. Table 13. MECHANICAL CHARACTERISTICS
Horizontal Outline Dimension Vertical Depth Horizontal Bezel Area Vertical Horizontal Active Display Area Vertical Weight Surface Treatment 7,200 g(Typ.), 7,600 g(Max) Hard coating(3H) Anti-glare treatment of the front polarizer 392.256mm 398.4mm 697.685mm 760.0mm 450.0 mm 48.0 mm 703.8mm
Notes : Please refer to a mechanic drawing in terms of tolerance at the next page.
Ver. 0.2
21 / 28
Product Specification
<FRONT VIEW>
Ver. 0.2
22 / 28
Product Specification
<REAR VIEW>
Master
Slave
Ver. 0.2
23 / 28
Product Specification
6. Reliability
Table 14. ENVIRONMENT TEST CONDITION No.
1 2 3 4
Test Item
High temperature storage test Low temperature storage test High temperature operation test Low temperature operation test Ta= 50C 240h Ta= -20C 240h
Condition
Wave form : random Vibration level : 1.0Grms Bandwidth : 10-500Hz Duration : X,Y,Z, 10 min One time each direction Shock level : 100Grms Waveform : half sine wave, 2ms Direction : X, Y, Z One time each direction Ta= 40 C 90%RH 240h 0 - 14,000 feet(4267.2m) 0 - 40,000 feet(12192m)
Ver. 0.2
24 / 28
Product Specification
7-2. EMC
a) ANSI C63.4 Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electrical Equipment in the Range of 9kHZ to 40GHz. American National Standards Institute(ANSI), 1992 b) C.I.S.P.R Limits and Methods of Measurement of Radio Interface Characteristics of Information Technology Equipment. International Special Committee on Radio Interference. c) EN 55022 Limits and Methods of Measurement of Radio Interface Characteristics of Information Technology Equipment. European Committee for Electrotechnical Standardization.(CENELEC), 1998 ( Including A1: 2000 )
Ver. 0.2
25 / 28
Product Specification
2001 1
2002 2
2003 3
2004 4
2005 5
2006 6
2007 7
2. MONTH
Month Mark Jan 1 Feb 2 Mar 4 Apr 4 May 5 Jun 6 Jul 7 Aug 8 Sep 9 Oct A Nov B Dec C
3. PANEL CODE
Panel Code Mark P1 Factory 1 P2 Factory 2 P3 Factory 3 P4 Factory 4 P5 Factory 5 Hydis Panel H
4. FACTORY CODE
Factory Code Mark LPL Gumi K LPL Nanjing C Hee Sung D
5. SERIAL NO.
Year Mark 1 ~ 99999 00001 ~ 99999 100000 ~ A0001 ~ A9999, ..... , Z9999
b) Location of Lot Mark Serial NO. is printed on the label. The label is attached to the backside of the LCD module. This is subject to change without prior notice.
Product Specification
9. Precautions
Please pay attention to the followings when you use this TFT LCD module.
Product Specification
9-5. Storage
When storing modules as spares for a long time, the following precautions are necessary. (1) Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep the temperature between 5C and 35C at normal humidity. (2) The polarizer surface should not come in contact with any other object. It is recommended that they be stored in the container in which they were shipped.
Ver. 0.2
28 / 28