Documente Academic
Documente Profesional
Documente Cultură
Content
Chapter 1. Items include in standard package Product package content ...1-2 Chapter 2 HI-2600 Series Introduction HI-2600 introduction 2-2 Chapter 3 Get Started First time operation(Turn on/off, Setup, Adjustment ).3-2 General Maintenance .3-3 On/Off Power ...3-3 Touch Screen Adjustment ..3-4 Time and Date setting .3-4 Touch Setting and input setting..3-7 Input Information .3-9 Virtual screen keyboard ..3-9 Use of input keys .3-9 Connection to personal Computer 3-9 Reconfiguration .3-10 Battery operation notice3-10 Battery level indication ..3-11 Checking of remaining battery..3-11 Chapter 4 Accessories Operations GPRS network connection setting ..4-15 WLAN network connection setting .4-19 Bar Code Scanning4-23
www.hyintech.com
www.hyintech.com
Standard Package Include Please verify the package content with the following items: This User Manual Hardware include
1.
Stylus /w rubber spring type thread Hand Stripe
2.
battery
Power Adapter
.
www.hyintech.com
4.
HI-2600
www.hyintech.com
Chapter 2
HI-2600 Introduction
HI-2600 Hardware Introduction Front (Function Introduction) Front (Buttons Introduction) Function Shortcut Keys Rear (Function Introduction)
www.hyintech.com
a. Charging and Scanning Status Indicator : While Charging, or Scanning Bar Code, LED will show the operation status. Red means charging battery. Green means fully charged or successfully decoded bar code reading. Flashing green LED means low battery b. Ear Piece (GPRS): When HI-2600 equipped with GPRS module, insertion of ear piece can provide voice communication. c. SD/MMC slot: Provide free plug in SD/MMC memory card. d. Touch Screen: Touch screen provide direct operation with stylus. e. USB & Charging port: Plug in USB or charging cable for data transfer or charge battery.
www.hyintech.com
g. S2 key f. S1 key k. Caps c. ESC key a. Bar Code Scan keys e. Backward key d. Function
key
key
a. Bar Code Scan: b. c. d. e. Power On/Off : ESC key: Functions key: Backward:
Press any of the scanning keys will start to scan bar code. Press once to turn on or off Press ESC to exit from fucntion Pre-program function keys Erase previous character, move cursor backward. Press S1 equivalent to press F11 function Press S2 equivalent to press F12 function Press numeric keys or compound keys for Alphabet keys Press confirm key to execute selected function Turn on/off backlit keys
www.hyintech.com
k. Cap key:
. Function Short Cut Keys [Func] + [S1] [Func] + [S2] [Func] + [.] [Func] + [<=] [Func] + [0] [Func] + [1] [Func] + [2] [Func] + [3] [Func] + [4] [Func] + [5] [Func] + [6] [Func] + [7] [Func] + [8] [Func] + [9] Function Lock keypad input Alpha mode/Numeric Mode Calibration GPIO CPLD Battery status GPIO CPLD backlight (LED + keypad) GPIO CPLD F1 Windows CE Help F2 programmable- Scan code F3 programmable- Scan code F4 programmable- Scan code F5 programmable- Scan code F6 programmable- Scan code F7 programmable- Scan code F8 programmable- Scan code F9 programmable- Scan code
www.hyintech.com
Chapter 3
Getting Started
First time operation(Turn on/off, Setup, Adjustment ) General Maintenance On/ Off Power Touch Screen Adjustment Time and Date setting Touch Setting and input setting Input Information Virtual screen keyboard Use of input keys Connection to personal Computer Reconfiguration Battery operation notice Battery level indication Checking of remaining battery
www.hyintech.com
First Time Operate Connect Power Adapter to AC Power Source Connect AC Power Adapter to the main unit through power cable and charge the main battery for at least 18 hours before first time operate. Turn On Press On/Off key to turn on main unit. Touch Screen Adjustment Use Stylus point to center of cross appear on screen and release, Adjust until advance to next screen. Confirm Setup Press OK to confirm, save cursor positioning setup. Adjust date and time 1. First of all, adjust the time zone first, select the correct time zone that you are located, when complete press the apply at the bottom right of the screen. 2. Setup Date (year), press once at the year field, then you can select which year. 3. Setup Date (Month), press once at the month field, then you can select month in the pull-down list; or press left / right for other months. 4. Setup Date (Day), press once at the selected day field, and the setup of date is completed. 5. When Complete, please press upper right corner OK to confirm setup.
www.hyintech.com
General Maintenance Screen Cleaning Use finger touch screen will left fingerprint or dirt on screen and create smudge display. To clean up screen, use the soft cloth apply small amount of glass cleaning solvent and gently rub the screen surface. Please do not directly apply the glass cleaning solvent onto the screen. You may use screen protector to protect the screen. On/Off Power Turn On Power While in Power Off mode, press once at On/Off Key will turn on HI-2600. Turn Off Power While in Power On mode, press once at On/Off key will turn off HI-2600.
Touch Screen Adjustment After a period of time, you may find out the touch screen is not so sensitive, thereafter, you may recalibrate the touch screen. Steps: 1.Choose Control Panel, select pen point, then select adjustment, select readjustment, the adjustment screen will appear.
** The above words pen point, adjustment, readjustment may appear differently in your machine due to the following reason This is a direct translation from foreign language, therefore the actual message prompt at the screen with your local language may appear different, but the meaning should be equivalent. This may also caused by different version of operating system
www.hyintech.com
2. Use Stylus point to center of cross appear on screen and hold at least one second and release, Adjust until advance to next screen.
After touch screen recalibration, select [OK] on the upper right corner to confirm and complete
www.hyintech.com
Double touch lower bottom time display to access to time/date setup screen
Setup Time Zone first, touch pull down arrow on the right to appear a selection of time zone, and choose the correct time zone and high-light it.
www.hyintech.com
Touch up/down pull down arrow to select year and high-light correct year
www.hyintech.com
Touch Month pull down and high light to select the correct month
www.hyintech.com
Touch and input Just like using mouse in your PC, use the stylus touch screen is the basic operation. When first time use HI-2600, screen will prompt instruction to follow. This procedure include screen adjustment. This adjustment will calibrate the internal circuitry to corresponds to the touch sensor on the screen. Therefore, when you touch the screen the HI-2600 will response correctly and accurately. Notice: Please use stylus to touch the HI-2600 screen, do not use any sharp point object such as ball pen to scrape on the screen.
When HI-2600 is in operating mode, you may touch HI-2600 touch screen to execution program, example: Open Startup menu Select menu instruction Select pull down choice item Open virtual keyboard
Similar to the mouse drag and drop high-light wording or move selected items, you may also press on the scroll up and down on display. Input Information You may use the following methods to input information into
www.hyintech.com
HI-2600: Input from virtual keyboard Input directly from numeric keys or compound keys on HI-2600 keypad Virtual screen keyboard Virtual screen keyboard is displayed on the lower portion of the screen, select input method, shift to alphabet or number or symbols input or even handwriting input.
Double touch lower right corner virtual keyboard to prompt up the virtual keyboard
Select keyboard
www.hyintech.com
Use of input key 1. Use[Func] + [S2]function keys shift to numeric and alphabet mode. 2. Input directly from keyboard Bar Code Scanning 1. Press on/off key, turn on HI-2600 2. Execute bar code scanning program 3. Press any of the scan buttons to scan bar code. Make sure scan beam totally cut across bar code with at least over 10%, this is to cover quiet zones in leading and ending of the bar code.
www.hyintech.com
Connects to PC 1. Install Microsoft ActiveSync first in PC(Can download from Microsoft website). 2. Setup in HI-2600: Select Start/Setup/ Control Panel/ PC Connect/ Change connection, select USB Socket Default.
www.hyintech.com
Reset In normal condition, you do not need to press Reset button, However, when you encounter situation of no response from touch screen, then you should press Reset and resume the HI-2600 to normal operation. Soft Reset Soft Reset(Software reset) make HI-2600 stop execute current process, and restart HI-2600. All data and program in working memory will be lost. Execute method: Use stylus tip press into Reset button. Hard Reset Hard Reset(hardware reset) will make HI-2600 force shutdown and clean up the current process and data stored in the working memory. Execute method: press and hold on/off key, at the same time use Stylus tip press Reset key. Note about Battery Usage Because the files and information are stored in RAM (Random Access Internal Memory), therefore retain the battery at functional level is very important. If you operate until the battery is depleted, your data information will be lost. Although the O.S. and internal programs will not be erased, however, add on program and special setup will be lost. In normal situation, HI-2600 can operate 8 hours after complete charge. When power drop below minimum power threshold, it be appear lack of power (insufficient main battery) signal, you should immediately response to this warning by backup data to the host computer in order to avoid data lost. If you turn off HI-2600, data can retain for 3 days.
www.hyintech.com
When connect HI-2600 to power adapter, HI-2600 will automatically charge up main battery. Therefore, when encounter low battery, the scanning led will appear flash green light, in such situation you should connect power adapter immediately. When you connect HI-2600 power adapter, scanning led will show the charging status: Red light indicate currently charging Green light indicate fully charged
www.hyintech.com
icon will be appeared at the bottom of the HI-2600 screen means it is currently connected to power adapter.
, will
www.hyintech.com
Method 2
Double touch
www.hyintech.com
When power level below 7.5V, this screen will appear to indicate low battery, warning message will be main battery low, bottom of screen will appear icon.
When battery below 7.4V threshold, warning message will appear on screen to indicate low battery with single battery icon .
www.hyintech.com
New Connection
www.hyintech.com
Select port setup for baud rate to :115200 8 date bit, parity none and flow control none
www.hyintech.com
Dial up selection setup Please input in Extra Settings field with the reference code of the telecommunication operator. For example: China Telecom is : +CGDCONT=1,"IP","INTERNET","",0,0 Far Transmit telecom is: +CGDCONT=1,"IP","FETNET01","",0,0 China Mobile: +CGDCONT=1,"IP","cmnet" not necessary all telecom provide has this parameters.
No necessary to change any setting in TCP/IP setup ( use default will do) Select next step and enter connect number: please input *99***1#, then select finish GPRS connection setup.
www.hyintech.com
Select Edit
Amend Dial up within city G Amend dial up long distance G Amend dial up international G Select OK
www.hyintech.com
Select OK to next
Select Connect
www.hyintech.com
Select connect
www.hyintech.com
Select security type. Please contact your network manager for correct setup
Select Identity Certificate type. Please contact your network manager for correct setup
www.hyintech.com
Input network security keys. Please contact your network administrator for detail
Select EAP type. Please contact your network administrator for detail information.
www.hyintech.com
www.hyintech.com
Appendix
Product Intrduction Industial Level HF handheld reader; High capability barcode scanner. Combined PDA and RFID technology, with data collecting and storing features; WiFi,Bluetooth, and GPRS for Real-time connection Support Wavelink Avalanche For remote mobile devices management Support OAC Client for 802.1 Security Support T9 multilingual intellignent input method Industrial grade hardware design , durable and able to sustain in harsh enviroment Support signature capture function Special design be applied in industry market and hazardous environments. e.g. logistic management, asset tracking, anti-fake etc ; Specification: HF Reader
Supported protocal: ISO/IEC 14443A/B ISO/IEC 15693 Mifare One S50,S70, UltraLight,PRO
AT88RF020 66CL160S Frequency13.56MHz Bound Rate9600-115200 bit/s Operation Distance0--8cm Support SR176SRIX4KTYPE-BI-Code2TI RFID Tag-it HF-IEM4135,EM4034 etc. Working temperature-10 degree +40 degree Storage Temperature-20 degree +70 degree
Barcode Scanner
Optical Definition0.004 inch(smallest width) Frequency 100 time per secondbi- direction scanning distance 1078cn Sunlight 8,000 ft. candles (86,112Lux) artifical light450 ft. candles (4,844Lux) anti-shake2,000 +/- 5% G supported barcode style
UPC-A,UPC-E, EAN-13,/JAN-13, EAN-8/JAN-8, CODE 39, CODE 128, CODABAR/NW7,Interleave 2/5, Industrial 2/5, Matrix 2/5, CODE 93, CODE 11, China Postage, MSI/PLESSEY.
Operation Environment Operating Temperature-15 C to +50 C Storage Temperature -20 C to +80 C Sealing StandardIP54 Drop ProofSustain 1.2m multiple drops on concrete floor Battery Ni-ion battery 3.7v 2800mAh/ 3200mAh
O O O C
Operating System Windows CE 5.0 CPU SAMSUNG 400 MHz CPU Flash 64/128MB; RAM 64/128MBSupport up to 1GB SD Flash
Storage
Display 3.5 QVGA (240x320 pixel) 64K colorreflexive TFT-LCDLED backlit Keyboard 25+1 Compound backlit keyboard; soft touch, support handwriting input
Sound Track supportDual Speaker Standard Communication USB1.1 Host and Client RS232 Port BlueTooth Class2 V1.1 (Optional) Integrated GSM/GPRS Communication Module (900/1800/1900MHz) (Optional) Wireless Network IEEE802.11b/g Standard (11Mb/S-54Mb/S) (Optional) Bar Code Scanning System Integrated Bar Code Laser Scanner (Selective); Support EAN, UPC, JAN, Code11, Code 39, I 2 of 5 and more WLAN Security WPA, 802.11i(WPA2), WEP, TKIP, TLS, TTLS, AES, PEAP, LEAP, MD5 Battery Charger Standard battery charger 5V 3AVehicle charger port also available
Accessory USB Data Cable, Vehicle Charger, Serial/USB/battery charge Cradle 1-Slot/2-Slot/4-Slot, pouch, carrying case, screen protector