Documente Academic
Documente Profesional
Documente Cultură
(User Manual)
SW-MTS-200C-UG-V3.3 Apr 12. 2010
Contents
1. Safety Precautions ..................................................................................................................................4 1.1 The Terminal .....................................................................................................................................4 1.2 The RUIM...........................................................................................................................................4 2. Before Usage ...........................................................................................................................................5 2.1 Minimum system requirement .......................................................................................................5 2.2 Be cautious when separating USB extension cable from your PC.......................................5 2.3 Do not remove RUIM card while connecting to Internet.........................................................5 2.4 Keep RUIM card safe from damage.............................................................................................5 3. Basic Usage .............................................................................................................................................6 3.1 Key Features.....................................................................................................................................6 3.2 View of MBrowse USB Modem .....................................................................................................6 3.3 RUIM Card Usage ............................................................................................................................7 4. Getting Started.........................................................................................................................................7 5. LED Indicators (In Modem Mode) ..........................................................................................................8 5.1 POWER...............................................................................................................................................8 5.2 IDLE ....................................................................................................................................................8 5.3 BUSY ..................................................................................................................................................8 6. Program Installation................................................................................................................................9 6.1 Minimum System Requirement......................................................................................................9 6.1.1 PC Hardware ..............................................................................................................................9 6.1.2 Operating System......................................................................................................................9 6.2 USB Driver Installation (Windows XP/2000)................................................................................9 6.3 USB Driver Installation (Windows Vista) ...................................................................................10 6.4 USB Driver Installation (Windows 7)..........................................................................................10 6.5 Check Installed Driver...................................................................................................................11 7. Using MBrowse USB Modem Program ...............................................................................................12 7.1 Run and Exit...................................................................................................................................12 7.2 Descriptions for each button.......................................................................................................13 7.3 Descriptions for each icon...........................................................................................................13 7.4 Setting Menu...................................................................................................................................14 7.5 Connecting and Disconnecting the Internet .............................................................................16 7.6 Voice Call Menu .............................................................................................................................17 7.7 SMS Menu .......................................................................................................................................18 7.8 Phonebook Menu ...........................................................................................................................21
2/24
7.9 RCV / STV Activation Menu.........................................................................................................22 7.10 Help Menu .....................................................................................................................................22 8. Troubleshooting ....................................................................................................................................23
3/24
1. Safety Precautions
1.1 The Terminal
1) Do not disassemble or solder the terminal and RUIM Fire, injury, electric shock or malfunction may result. 2) Keep the terminal away from the water Take care not to use the terminal and RUIM in areas where they could get wet. 3) Do not use or leave the terminal and RUIM in places with a high temperature such as near a Fire or heater, or places exposed to direct sunlight or in cars under the blazing sun. Deformation, malfunction, heating the deterioration of performance may result. 4) Do not use near places such as gas stations where there is danger of fire or explosion. If used where there are flammable gases such as propane, gasoline, Explosion or fire may result.. 5) Do not throw the terminal or RUIM, or subject them to severe shocks. Malfunction may result. 6) Keep out of reach of baby and infant. Accidental swallowing or injury may result. 7) Do not store the terminal or RUIM in humid or dusty place or in hot areas Malfunction may result. 8) Turn off the terminal in place where use is prohibited such as an airplane or hospitals. Electronic and electronic medical appliance may be adversely affected. 9) Turn off the PC into which the terminal is inserted in place near high-precision electronic Device or device using weak electronic signal. The terminal may possibly cause these devices to malfunction.
4/24
2. Before Usage
2.1 Minimum system requirement
CPU and Memory Interface Operating System. PC-AT compatible and 128MB RAM or more USB1.1 Windows 2000 / XP / Vista / Windows 7
5/24
3. Basic Usage
3.1 Key Features
* This modem is for a portable high-speed internet that uses the CDMA network.
MTS-200C Inner antenna Type Max 153Kbps(DL)/153Kbps(UL) Windows 2000 / XP / Vista / Windows 7
USB Connector
6/24
Card cover
4. Getting Started
- Insert R-UIM Card - Insert SD Card (optional) - Read Quick Start Guide - Keep slider switch on the device in Modem position or Memory position as desired. - Connect to standard USB Connector
7/24
Descriptions
5.2 IDLE
Mode BLUE Idle status Descriptions
5.3 BUSY
Mode BLUE/RED Blink Busy Descriptions
8/24
6. Program Installation
6.1 Minimum System Requirement
6.1.1 PC Hardware Recommend to use PC/Notebook at speed of 300 MHz or higher. Minimum 233 MHz Speed required, Intel Pentium/Celeron products, AMD K6/Athlon/Duron products or compatible processors Recommend to use 128MB RAM or higher, Minimum 64MB of memory must be used, (But in this case the performance will be degraded and certain features will be limited.) At least 100 MB of free hard disk space is required. Mother Board or PCI card that supports USB. Video adaptor with Super VGA (800 x 600) or higher resolution and Monitor Keyboard and Mouse
6.1.2 Operating System Windows XP Home or Professional (with Service Pack 2) Windows 2000 (with Service Pack 4 for optimal performances) Windows Vista / Windows 7 < Recommended parameters > Windows Update: Keep your computer up to date
You should be able to see AnyDATA CDMA USB Modem and AnyDATA CDMA USB Serial Device, the driver has been successfully installed.
9/24
You should be able to see AnyDATA CDMA USB Modem and AnyDATA CDMA USB Serial Device, the driver has been successfully installed.
You should be able to see AnyDATA CDMA USB Modem and AnyDATA CDMA USB Serial Device, the driver has been successfully installed.
10/24
2) Double click on [System] icon 3) Select Device Manager from Hardware Tab.
11/24
4) AnyDATA CDMA USB Modem (PID 6502) will be under [Modems]. 5) AnyDATA CDMA USB Serial 1 (DIAG) Device (PID 6502) will be under [Ports (COM & LPT)]. 6)AnyDATA CDMA USB Serial 2 (NMEA) Device (PID 6502) will be under [Ports (COM & LPT)].
12/24
Display RSSI Signal Strength Indicator Calling Possible Calling not Possible New message arrived. Voice Mail arrived. Voice Mail and New Message arrived. Only 1X mode available USB connected Roaming
Function
13/24
MBrowse USB Modem (User Manual) Connected to the Modem Either the cable is disconnected to the modem Or improper port connection. Internet connected Internet disconnected Read Message Unread Message Sent Message Voice Privacy
14/24
Password MTS
3) [RUIM]
15/24
- This is very important parameter, it is strongly recommended to keep the default values.
- Always Top: The program window will be displayed on the top of all other open applications.
If connection succeeds,
2) Press
Dial calling number and Press To disconnect the voice call, press
button to make a voice call. button. Press button to erase one digit at a time.
17/24
Write Message
Inbox
Outbox
- Write Message: Edit and send new message - Outbox: Sent message box - Inbox: received message box
1) Write Message
- Input number(s) for sending SMS, number(s) can be inputted from Phonebook records. Press - Press button to move to send the message screen button to send the message
18/24
- After pressing
- If succeed in sending SMS then it will be returned to SMS menu. - Sent message is saved in SIM card
2) Outbox
- In this menu, all sent messages are shown. - To erase the message, select the message and press button.
19/24
- To see the message, select the message and press - To send the message to a new number, press
button. button.
3) Inbox
- In this menu, all received messages are shown. - To erase the message, select the message and press - To see the message, select the message and press - To send the message to a new number, press button. button. button.
20/24
1) Store new number - Edit the number and name on this And press save button on the right to save. - If the index already exists, then warning message will be appeared. screen,
2) Search the number - Choose the searching type (All, Index, Name, Phone number). - Edit the wanted name or number on this And press search button on the right to start searching. screen,
3) Additions - Press - Press - Press button to send a SMS message. button to make a voice call. button to delete selected number.
21/24
22/24
8. Troubleshooting
Q: I cannot connect to the Internet? A: Please check User name, Password and Service number on the [Setting] menu.
Q: How can I use the modem as memory Stick? A: Insert a good quality Micro SD Card (Up to 4GB) in the socket below the UIM socket. Keep the Slider Switch on the modem in MEMORY position. Insert the Modem in the USB port of your PC. This will show up as an additional Removable Drive in the Windows Explorer. You can read /write /Edit files in this location just like any other USB Memory Drive. Please check compatibility of MicroSD card technology and Brand before using the same. To use your device in Modem mode, just move the switch to MODEM position.
Q: The Internet connection is poor and frequently it gets disconnected. A: The CDMA frequency is at unstable state. Try to move to a different place then use it again. Also, if you touch or block the USB modem with hand/body contact, the modem connection speed degrades. Please be careful not to touch the modem with your hand or any part of the body. You may use goodquality USB extension cable to connect modem to the PC/laptop in poor signal or very high interference areas.
Q: After the installation of the program, the program does not run and displays following message
23/24
A: This means that USB modem and the computer are not connected properly OR the Slider switch on the modem is not in Modem position. Please double check.
Q: During the running of the program, following message appears and the program halts.
A: The actual connection of USB modem and computer has been disconnected. Please check whether the cable is dismounted, cable is disconnected or USB modem power has been turned off. Then try to reconnect the modem.
Q: How many people can I send SMS messages at once? A: It is possible to send maximum of 5 people at once.
Q: The program has ended but the USB modem power is turned off. A: The power of USB modem is not controlled by the program. The point USB modem turns on automatically is when USB is connected to the PC/Notebook.
Q: MBrowse USB Modem program displays DB xxxx Error message and terminates. A: MBrowse USB Modem program uses mdb format type of database file. This type of format is preinstalled when using Windows XP, Windows 2000 OS in a computer. However, this type of database file has been removed by some other program. Need to update following two (2) files from Microsoft site: 1. MDAC: <http://www.microsoft.com/downloads/details.aspx?FamilyID=6c050fe3-c795-4b7d-