Documente Academic
Documente Profesional
Documente Cultură
int/ITU-T
ITU-T The leader in CWDM Recommendations
G.694.2 Spectral grids for WDM applications: CWDM wavelength grid
I n t e r n a t i o n a l Te l e c o m m u n i c a t i o n U n i o n
CWDM means
Cost-effective applications, through a combination of uncooled single mode lasers, relaxed laser wavelength tolerances and wide pass-band filters 90 km reach for 2 bidirectional channels at 1.25 Gbit/s on a single fibre 55 km reach for 8 wavelengths at 2.5 Gbit/s 42 km reach for 6 bidirectional channels at 1.25 Gbit/s on a single (conventional) fibre 42 km reach for 16 wavelengths at 2.5 Gbit/s using low water peak fibre
Provides the wavelength grid for coarse wavelength division multiplexing (CWDM) applications. This wavelength grid supports a channel spacing of 20 nm.
G.695 Optical interfaces for coarse wavelength division multiplexing (CWDM) applications
Provides optical parameter values for physical layer interfaces of coarse wavelength division multiplexing (CWDM) applications with up to 16 channels and up to 2.5 Gbit/s.
Related Recommendations
G.652 Characteristics of a single-mode optical fibre and cable
CWDM
The characteristics of a single-mode optical fibre and cable with zero-dispersion wavelength around 1310 nm, but which can also be used in the 1550 nm region.
G.653 Characteristics of a dispersion-shifted single-mode optical fibre and cable
The characteristics of a single-mode optical fibre and cable with zero-dispersion wavelength shifted into the 1550 nm region, specified to take advantage of the attenuation minimum in that spectral region.
G.655 Characteristics of a non-zero dispersion-shifted single-mode optical fibre and cable
The characteristics of a single-mode optical fibre and cable, which has the absolute value of the chromatic dispersion coefficient greater than some non-zero value throughout the wavelength range from 1530 to 1565 nm, in order to reduce the growth of nonlinear effects which can be particularly deleterious in DWDM systems.
tsbpromo@itu.int
G.664 Optical safety procedures and requirements for optical transport systems
06.2008
Provides guidelines and requirements for techniques to enable optically safe working conditions (for the human eye and skin) on optical interfaces of the optical transport network (OTN), in particular, for systems employing high-power Raman amplification techniques, for equipment in restricted and controlled locations.
For more information on optical transmission Recommendation related activities please check the ITU-T Study Group 15 website at: www.itu.int/ITU-T/com15
ITU-T
workshops: www.itu.int/ITU-T/worksem/ e-flash and news: www.itu.int/ITU-T/news/ membership: www.itu.int/ITU-T/membership/ technology watch: www.itu.int/ITU-T/techwatch
www.itu.int/ITU-T
Highlights
20 nm channel spacing (G.694.2)
1.0
Unidirectional or bidirectional (single fibre) Applications up to 2.5 Gbit/s per wavelength G.652.C and D low water peak fibre G.652.A and B conventional fibre also supported for many applications Spectral dependence of attenuation and dispersion accounted for
Figure 1
15 10 5 0 5
1271
1291
1311
1331
1351
1371
1391
1411
1431
1451
1471
1491
1511
1531
1551
1571
1591
Wavelength (nm)
SDH
G.695
Vendor A OEO CWDM Mux/Demux Vendor B OEO CWDM Mux/Demux
Multichannel (CWDM) interfaces Multivendor interoperability: Enterprise Vendor A Mux/Demux can be connected to directory Vendor B Mux/Demux
H.350 Multimedia directory
Figure 2
Gigabit Ethernet
Fibre Channel
Fibre Channel
Vendor A
G.695
Vendor B
G.695
Single channel (coloured) interfaces Linear and ring configurations with OADMs Multivendor interoperability: Vendor A transceiver can be connected through Vendor B Mux/Demux and link to Vendor C transceiver
CWDM Transceiver
Figure 3
CWDM Transceiver
CWDM Transceiver
www.itu.int/ITU-T
1611
Attenuation (dB/km)
20