Documente Academic
Documente Profesional
Documente Cultură
0 to 200.100.25.255 150.150.0.0 to 150.150.255.255 172.16.0.0 to 172.31.255.255 192.168.0.0 to 192.168.255.255 127.16.0.0 to 127.31.255.255 Observable 1 correctness of response Description Option 1, Option 4, and Option 5 are correct. 1 point for each correct option. 0 points if more options are selected than required. Max Value 3
This item references content from the following areas: CCNA Exploration: Network Fundamentals
6.2.5 Public and Private Addresses What are three characteristics of CSMA/CD? (Choose three.) Devices can be configured with a higher transmission priority. A jam signal indicates that the collision has cleared and the media is not busy. A device listens and waits until the media is not busy before transmitting. The device with the electronic token is the only one that can transmit after a collision. All of the devices on a segment see data that passes on the network medium. After detecting a collision, hosts can attempt to resume transmission after a random time delay has expired. Max Value
Observable
Description Option 3, Option 5, and Option 6 are correct. 1 point for each correct option. 0 points if more options are selected than required.
correctness of response
This item references content from the following areas: CCNA Exploration: Network Fundamentals
9.4.2 CSMA/CD - The Process Which password is automatically encrypted when it is created? vty aux console enable secret enable password
Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals
Refer to the exhibit. Which type of network design is shown? client/server wide area dedicated server peer-to-peer Observable correctness of 1 response Description 2 points for Option 4 0 points for any other option Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals
Refer to the exhibit. Assume all devices are using default configurations. How many subnets are required to address the topolo shown? 1 3 4 5 7 Observable Description Max Value 2
response
This item references content from the following areas: CCNA Exploration: Network Fundamentals
Refer to the exhibit. A technician is working on a network problem that requires verification of the router LAN interface. What ad be pinged from this host to confirm that the router interface is operational? 127.0.0.1 192.168.64.196 192.168.254.1 192.168.254.9 192.168.254.254 Observable 1 Description Max Value 2
correctness of 2 points for Option 3 response 0 points for any other option
This item references content from the following areas: CCNA Exploration: Network Fundamentals
Refer to the exhibit. The tracert command is initiated from PC1 to PC4. Which device will send a response to the initial tracer PC1? Athens Ankara London Paris PC4 Observable 1 correctness of response Description 2 points for Option 3 0 points for any other option Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals
Refer to the exhibit. Each media link is labeled. What type of cable should be used to connect the different devices? Connection 1 - rollover cable Connection 2 - straight-through cable Connection 3 - crossover cable Connection 1 - crossover cable Connection 2 - rollover cable Connection 3 - crossover cable Connection 1 - straight-through cable Connection 2 - crossover cable Connection 3 - crossover cable Connection 1 - straight-through cable Connection 2 - crossover cable Connection 3 - straight-through cable Connection 1 - crossover cable Connection 2 - straight-through cable Connection 3 - crossover cable Observable 1 Description Max Value 2
correctness of 2 points for Option 4 response 0 points for any other option
This item references content from the following areas: CCNA Exploration: Network Fundamentals
8.3.3 Unshielded Twisted Pair (UTP) Cable Which OSI layer offers ordered data reconstruction services? application layer network layer presentation layer session layer transport layer
Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals
10
Refer to the exhibit. The diagram represents the process of sending e-mail between clients. Which list correctly identifies the co protocol used at each numbered stage of the diagram? 1.MUA 2.MDA 3.MTA 4.SMTP 5.MTA 6.POP 7.MDA 8.MUA 1.MUA 2.POP 3.MDA 4.SMTP 5.MTA 6.MDA 7.SMTP 8.MUA 1.MUA 2.POP 3.SMTP 4.MDA 5.MTA 6.SMTP 7.POP 8.MUA 1.MUA 2.SMTP 3.MTA 4.SMTP 5.MTA 6.MDA 7.POP 8.MUA Observable Description Max Value 2
correctness of 2 points for Option 4 1 response 0 points for any other option
This item references content from the following areas: CCNA Exploration: Network Fundamentals
11
Refer to the exhibit. The router of the company failed and was replaced. After the replacement, hosts C and D in the Education able to ping each other, but they are unable to access the hosts in the Accounts office. What is the likely cause of the problem? The IP address at the fa0/0 interface of the router is incorrectly configured. The subnet mask at the fa0/1 interface of the router is incorrectly entered. The IP address at the serial interface of the router is incorrectly configured. The hosts in the Accounts office are not on the same subnet as the hosts in the Education office. Observable Description Max Value 2
correctness of 2 points for Option 2 1 response 0 points for any other option
This item references content from the following areas: CCNA Exploration: Network Fundamentals
12
Refer to the exhibit. Host A wants to connect to host B on a different network. Which three IP addresses can be assigned to hos this connectivity? (Choose three.) 172.16.11.36 172.16.11.95 172.16.11.88 172.16.11.70 172.16.11.64 172.16.11.67 Max Value
Observable
Description
correctness of response
Option 3, Option 4, and Option 6 are correct. 1 point for each correct option. 0 points if more options are selected than required.
This item references content from the following areas: CCNA Exploration: Network Fundamentals
13
Refer to the exhibit. A host is connected to hub 1. Which combination of IP address, subnet mask, and default gateway can allo function in the network? IP address: 172.16.31.36 Subnet mask: 255.255.255.240 Default gateway: 172.16.31.35 IP address: 172.16.31.63 Subnet mask: 255.255.255.224 Default gateway: 172.16.31.35 IP address: 172.16.31.29 Subnet mask: 255.255.255.248 Default gateway: 172.16.31.35 IP address: 172.16.31.32 Subnet mask: 255.255.255.224 Default gateway: 172.16.31.35 IP address: 172.16.31.29 Subnet mask: 255.255.255.240 Default gateway: 172.16.30.1 IP address: 172.16.31.37 Subnet mask: 255.255.255.224 Default gateway: 172.16.31.35 Observable 1 Description Max Value 2
correctness of 2 points for Option 6 response 0 points for any other option
This item references content from the following areas: CCNA Exploration: Network Fundamentals
14
Refer to the exhibit. Host A is accessing multiple servers. Which combination of port number and address will uniquely identify process running on a specific server? MAC address of the server and port number of the service IP address of the host and port number of the service MAC address of the host and port number of the service IP address of the server and port number of the service Observable correctness of 1 response Description 2 points for Option 4 0 points for any other option Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals
15
Refer to the exhibit. Which list refers only to end devices? D,E,F,G
Description
Max Value 2
correctness 2 points for Option 1 of response 0 points for any other option
This item references content from the following areas: CCNA Exploration: Network Fundamentals
16
Refer to the exhibit. An employee wants to access the organization intranet from home. Which intermediary device should be u connect the organization intranet to the Internet to enable this access? hub switch router wireless access point Observable 1 Description Max Value 2
correctness of 2 points for Option 3 response 0 points for any other option
This item references content from the following areas: CCNA Exploration: Network Fundamentals
17
Refer to the exhibit. Host A sends a frame with the destination MAC address as FFFF.FFFF.FFFF. What action will the switch frame? It will drop the frame. It will send the frame back to host A. It will send the frame to all hosts except host A. It will forward the frame to the default gateway. Observable correctness of 1 response Description 2 points for Option 3 0 points for any other option Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals
18
9.6.3 Switches - Selective Forwarding Which two types of media can provide bandwidth up to 1 Gb/s? (Choose two.) 10 BASE-T 100 BASE-T 100 BASE-FX 1000 BASE-TX 1000 BASE-SX Max Value
Observable
Description Option 4 and Option 5 are correct. 1 point for each correct option. 0 points if more options are selected than required.
correctness of 1 response
This item references content from the following areas: CCNA Exploration: Network Fundamentals
19
Refer to the exhibit. Which logical topology describes the exhibited network? star ring point-to-point multi-access Observable 1 correctness of response Description 2 points for Option 2 0 points for any other option Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals
20
A routing issue has occurred in your internetwork. Which of the following type of devices should be examined to isolate this access point host hub router switch Observable Description 2 points for Option 4 0 points for any other option Max Value 2
correctness of response
This item references content from the following areas: CCNA Exploration: Network Fundamentals
21
5.3.4 A Route - The Path to a Network Which physical component is used to access and perform the initial configuration on a new unconfigured router?
Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals
22
11.1.1 Cisco IOS Which option shows how a router will route packets to a remote network?
Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals
23
5.3.4 A Route - The Path to a Network What is the Cisco IOS? system software for Cisco devices Read Only Memory in Cisco devices non-volatile storage for device configurations an initial operating system that is used for boot functions
Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals
24
11.1.1 Cisco IOS What can the user do from the command prompt, Router(config-line)# ? Configure one of the network interfaces. Configure one of the physical or virtual lines. Verify the running configuration on the device. Configure the parameters for one of the routing protocols.
Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals
25
11.1.7 IOS Configuration Modes Which option correctly identifies the interface or interfaces used to connect the router to a CSU/DSU for WAN connectivity?
Observabl e 1
Description
Max Value 2
correctness 2 points for Option 4 of response 0 points for any other option
This item references content from the following areas: CCNA Exploration: Network Fundamentals
26
10.2.3 Making WAN Connections Which physical connector type is used for a serial V.35 connection to the CSU/DSU?
Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals
27
Refer to the exhibit. A network technician has made several changes to R1 since the configuration has last been saved. The m configuration did not produce the desired changes. The technician wants to store a backup copy of the saved configuration on server before reloading. Which action will cause the unmodified data to be saved on the TFTP server?
Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals
28
A network administrator subnets the network 192.168.1.0/24 into four subnets. Which option correctly addresses Router1 and the second subnet created?
Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals
29
6.5.1 Basic subnetting A network has grown too large for technicians to configure network addresses and hosts files for name resolution. Which application layer services should be added to the server to allow these needs to be satisfied dynamically? (Choose two.) DNS FTP DHCP HTTP SMTP Max Value
Observable
Description Option 1 and Option 3 are correct. 1 point for each correct option. 0 points if more options are selected than required.
correctness of response
This item references content from the following areas: CCNA Exploration: Network Fundamentals
30
3.3.1 DNS Services and Protocol 3.3.5 DHCP What happens when a host station receives a frame that contains its own MAC address in the destination field? The Layer 2 information is removed and the frame is pushed up to Layer 3. The host station will copy the information to its buffers and send it back out. The frame originated from the host and will be ignored. The Layer 3 information is added to the frame.
Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals
31
Refer to the exhibit. An administrator made several changes to the configuration of the router but did not accomplish the desired r the changes the reload command was used. What will happen if the administrator answers yes to the prompt? The changes will be lost and the configuration file in RAM will be loaded. The changes will be saved and the configuration file in RAM will be loaded. The changes will be lost and the configuration file in NVRAM will be loaded. The changes will be saved and the configuration file in NVRAM will be loaded. Observabl e 1
Description
Max Value 2
correctness 2 points for Option 4 of response 0 points for any other option
This item references content from the following areas: CCNA Exploration: Network Fundamentals
32
11.2.3 Managing Configuration Files How can ARP be used to help document the network? It can list each hop on the way to a destination host. It can show the average latency of hosts on the network. It can provide a list of physical addresses on the network. It can indicate which hosts are not responding to network traffic.
Observable
Description
Max Value
correctness of response
This item references content from the following areas: CCNA Exploration: Network Fundamentals
33
Refer to the exhibit. A network administrator is troubleshooting a link that is down between Router1 and Router2. To correct the p wire pairs need to be switched on one of the Ethernet cable ends? pair 1 and pair 2 pair 1 and pair 3 pair 2 and pair 3 pair 2 and pair 4 Observabl e 1
Description
Max Value 2
correctness 2 points for Option 3 of response 0 points for any other option
This item references content from the following areas: CCNA Exploration: Network Fundamentals
34
A network administrator is asked to design a new addressing scheme for a corporate network. There are 60 users in the ma users in the branch office, 28 users in manufacturing, 12 in the sales office, and 4 users in the research office. Which VLSM scheme that uses the 192.168.88.0/24 network will fulfill the requirements while wasting the fewest addresses? 192.168.88.0/26 main 192.168.88.32/26 branch 192.168.88.64/26 manufacturing 192.168.88.96/27 sales 192.168.88.128/28 research 192.168.88.0/26 main 192.168.88.64/26 branch 192.168.88.128/27 manufacturing 192.168.88.160/28 sales 192.168.88.176/29 research 192.168.88.0/27 main 192.168.88.32/27 branch 192.168.88.64/28 manufacturing
192.168.88.80/29 sales 192.168.88.88/30 research 192.168.88.0/27 main 192.168.88.64/28 branch 192.168.88.80/28 manufacturing 192.168.88.96/29 sales 192.168.88.104/30 research Observable 1 correctness of response Description 2 points for Option 2 0 points for any other option Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals
35
Refer to the exhibit. Host A is able to access resources on the local LAN but is unable to access any resources on the Internet likely cause of this problem? The host subnet mask in incorrect. The network uses private addresses. The host address is a network address. The default gateway is on a different subnet from the host. Observable correctness of 1 response Description 2 points for Option 4 0 points for any other option Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals
36
An administrator is in the middle of entering a lengthy command when suddenly output from the IOS appears stating that a has gone down and then up again. Consequently, the command that the administrator was typing is no longer legible on th
What CLI keystrokes can be entered to return to the line that the administrator was typing? Ctrl-D Ctrl-K Ctrl-R Ctrl-Z Observable 1 correctness of response Description 2 points for Option 3 0 points for any other option Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals
37
11.1.5 Using CLI Help Which requirement would cause a network designer to use a router instead of a switch in a network design? creating smaller collision domains providing both UTP and fiber ports connecting end-user devices to the network core interconnecting several networks using different technologies
Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals
38
Which application layer protocol allows administrators to log into a server from remote locations and control a server as tho locally? DNS FTP DHCP SMTP Telnet Observable Description 2 points for Option 5 0 points for any other option Max Value 2
correctness of 1 response
This item references content from the following areas: CCNA Exploration: Network Fundamentals
39
Which TCP/IP model layer creates additional overhead on network resources due to acknowledgments, tracking, and retran data? internet transport application
network access Observable 1 correctness of response Description 2 points for Option 2 0 points for any other option Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals
40
4.1.3 Supporting Reliable Communication Which password would allow a user to establish a Telnet session with a Cisco device? VTY password enable password console password enable secret password
Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals
41
A network technician has made a UTP cable that is terminated as T568A on one end and T568B on the opposite end. Wha cable has been constructed? patch console crossover straight-through Observable Description 2 points for Option 3 0 points for any other option Max Value 2
correctness of 1 response
This item references content from the following areas: CCNA Exploration: Network Fundamentals
42
10.2.2 Making LAN Connections Which identifier is contained in the header of the Layer 2 Ethernet frame? timing and synchronization of bits source and destination port numbers logical source and destination addresses physical source and destination addresses
Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals
43
Refer to the exhibit. Which two layers of the OSI model describe the same functions as the transport and internet layers of t model? (Choose two.) application layer presentation layer session layer transport layer network layer data link layer physical layer Observable correctness of response Description Option 4 and Option 5 are correct. 1 point for each correct option. 0 points if more options are selected than required. Max Value
This item references content from the following areas: CCNA Exploration: Network Fundamentals
44
2.4.8 Comparing the OSI Model with the TCP/IP Model Which prompt is associated with the privileged exec mode? R1> R1# R1(config)# R1(config-router)#
Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals
45
11.1.3 Cisco IOS Modes Which location of router memory is cleared with the erase startup-config command? flash RAM ROM NVRAM
Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals
46
An administrator makes changes to the default configuration of a router and saves them to NVRAM. After testing, it is disco configurations did not have the desired effect and must be removed. What steps must be taken to remove the changes and router to the default configuration? Reboot the router. Use no version of the commands that are issued. Issue the erase startup-config command, and then reboot the router. Issue the erase running-config command, and then reboot the router. Observable Description 2 points for Option 3 0 points for any other option Max Value 2
correctness of response
This item references content from the following areas: CCNA Exploration: Network Fundamentals
47
A technician wishes to connect two computers to move data from one to the other before reloading the operating system. T both PCs do not support autosensing feature. Which procedure will satisfy the requirement? Interconnect the two PCs with a rollover cable. Interconnect the two PCs with two rollover cables and a hub. Interconnect the two PCs with a crossover cable. Interconnest the two PCs with two crossover cables and a hub. Observable Description 2 points for Option 3 0 points for any other option Max Value 2
correctness of response
This item references content from the following areas: CCNA Exploration: Network Fundamentals
48
Refer to the exhibit. From global configuration mode, an administrator is attempting to create a message-of-the-day banner by command banner motd V Authorized access only! Violators will be prosecuted! V When users log in using Telnet, the ba appear correctly. What is the problem? The banner message is too long. The delimiting character appears in the banner message. The symbol ! signals the end of a banner message. Message-of-the-day banners will only appear when a user logs in through the console port. Observable 1 correctness of response Description 2 points for Option 2 0 points for any other option Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals
49
Refer to the exhibit. Which two facts can be determined about the topology? (Choose two.) Three networks are needed. Two logical address ranges are required. Three broadcast domains are present. Three collision domains are present. Four networks are needed. Observable 1 correctness of Description Option 2 and Option 4 are correct. Max Value 2
response
1 point for each correct option. 0 points if more options are selected than required.
This item references content from the following areas: CCNA Exploration: Network Fundamentals
50
5.2.2 Why Separate Hosts Into Networks? - Performance 10.1.1 Choosing the Appropriate LAN Device Which answer lists the CLI mode hierarchy from least level of privilege to greatest? global, privileged, user, specific global, user, privileged, specific user, global, privileged, specific user, privileged, global, specific
Max Value 2
This item references content from the following areas: CCNA Exploration: Network Fundamentals