Documente Academic
Documente Profesional
Documente Cultură
PORTAL
WIKI
XDA TV
DEVICE DB
NEW POSTS
QUICK LINKS
USER CP
Welcome, mascom.
THREAD TOOLS
DISPLAY MODES
Page 1 of 7
#1
guys thanx to someone iam able to upgrade my galaxy tab from 2.2 froyo into 2.3.3 gingerbread and guess what whole process bugs free so here iam-----
http://androidadvices.com/downloads/....3.3_P1000.zip
2. now download the latest version of odin3 v1.7, u can find it anywhere easily 3. After downloading the package you will have to unzip to get the same. Please note that you will have to unzip the package after downloading and in the process of unzipping if it prompts you to enter the password then you will have to enter password as “androidadvices.com” and then the files will have to be extracted to the desktop. 4. Now, next up you will have to open the Odin’s exe file which is Odin3 v1.7 as shown above from the downloaded package after which you will see that a pop up screen will be launched which will look like the below shown screen shot.
5. Up next, just open the Odin, in the Option list as shown below, you will have to check 2 options in the Option field which are “Auto Reboot” and also the “F:Reset Time”. now you will have to next choose the PIT file.
6. After this you will have to put the Galaxy Tab in the download mode which can be done by holding the volume down button you will have to switch ON the device as shown in the below pictured manner.
7. So, now after entering in the download mode as shown in the above screen you will have to connect your device to the computer with the data cable and need to make sure that the ID:COM box glows yellow which means that all the device drivers are loaded successfully and you are ready to proceed for the rest of the steps ahead. You will have to enter in the options as mentioned below, Please note that apart from the below options don’t choose any other options.
8. Now, as soon as the yellow light is turned ON, there you go you can now hit on the Start button after which you will have to wait for a while till the Green colored “PASS” box is not shown up which is shown below. It may take 3-5 minutes to show up this box which is shown below.
9. So, that’s it you have now successfully upgraded to the new latest firmware of 2.3.3 gingerbread version for your Galaxy Tab. Now to simply find via the code whether you have upgraded the firmware or not successfully, all you need to do is to just simply enter in the code as *#1234# after which you will be able to see the device’s version number along with the firmware version in detail easily. Do, let us know if you face or any issues while updating the firmware of your Samsung Galaxy Tab. Do, let us know if you face any sorts of issues as w will help you to get out of the same. Please note that, since you have installed the new firmware you will have to again configure all important settings so as to enjoy the services like before and also you will have to reset the phone once after the firmware update.
Note: In an unlikely event if the firmware doesn’t update successfully then you will have to re follow the instructions to update with the same.
rar password---- androidadvices.com proof---
The Following 10 Users Say Thank You to deepx10 For This Useful Post: Show/Hide
18th May 2011, 04:57 PM Thanks Meter 17 Senior Member Posts: 174 Join Date: May 2008
#2
18th May 2011, 05:32 PM Thanks Meter 10 Member |OP| Posts: 30 Join Date: Nov 2010 Originally Posted by triplex76
#3
I did nothing else, i just followed the instructions and i made it perfecty dud
18th May 2011, 11:47 PM Thanks Meter 0 Junior Member Posts: 12 Join Date: Aug 2009
#4
Is phone function present in this rom Sent from my GT-P1000 using XDA App
18th May 2011, 11:52 PM Thanks Meter 13 Senior Member Posts: 142 Join Date: Sep 2007
#5
Of course it is. It's a euro rom. Sent from my GT-P1000 using XDA App
#6
No real need for any of this. Just go to the Overcome thread, download the PDF guide which has links to the stock rom and then the custom rom for safe upgrading. The guide is easy to follow and has all the needed information.
Senior Member Posts: 1,740 Join Date: Sep 2008 Location: Hull
__________________ .
HTC Device History: HTC Touch > HTC Universal > HTC Touch HD > HTC HD2 HTC HD2: [MAGLDR/cLK] LeoRCMix S [Sense 2.1+3.0] Sasmsung Galaxy Tab: [ROM][GSM][2.3.3] Overcome ROM v2
#7
I tried this on my CDMA Tab yesterday, took a few hours, got it to boot, hung on samsung logo, i am digging the Samsung boot logo though. No other response, still trying to flash it back to stock verizon, finding stock verizon PIT file was hard, took awhile, it keeps failing, but Ill let it charge back up, try again later. Oh, lol I own 3 Tabs, was doing this to my "bitch" tab. the one I flog with different roms. __________________ DX~~~Blurrybread GB VZW Galaxy Tab VZW Galaxy Tab HC Port. My guinea pig tab. PM Me for an FTP account on my server to host your Android Projects. Ditch the lame file sharing sites. FREE!
Senior Member
Mirror I am building of Device Roms, Kernals, Recovery, Apps, etc http://www.blackmugmedia.com/Android/ Wiki page I tossed on my server for Android related anything, use it if you like, it's there for everyonehttp://www.blackmugmedia.com/wiki/in...itle=Main_Page
#8
I'm also stuck on the Samsung logo. I've reset a couple of times, and also factory reset. When I factory reset I get an error (in red text): E:format_volume: rfs format failed on /dev/block/stl10 This error happens immediately after: Formatting /dbdata... Any help appreciated - but please be gently 'cos I'm an Android noob
Samsung Galaxy Tab GT-P1000. Gingerbread 2.3.3. HTC TyTN II - OS: PC.Ultimate.V11WWE - Radio 1.70.19.09 - JockyW HardSPL 3.29 Hermes (Vodafone) - O/S: Schaps 4.20 - Radio: 1.48.00.00 - HardSPL: 2.10.Olipro Hermes (Vodafone) - Stock Rom - Stock Radio - Bricked because NOT HARD SPL QTEK 9100 - Stock Rom - Stock Radio - Stolen in France I-Mate K-Jam - Stock Rom - Stock Radio - Stolen in France Kaiser WIKI Hermes WIKI MrVanx's Guide for Hermes
__________________
19th May 2011, 03:01 AM Thanks Meter 0 Junior Member Posts: 12 Join Date: Aug 2009
#9
This is my folder structure of the rom folder. Am i doing anything wrong. I am new to this so please help me!!!!
19th May 2011, 03:01 AM Thanks Meter 10 Member |OP| Posts: 30 Join Date: Nov 2010
# 10
Guys wait on boot screen, i also waited for 1/2 n hour 1st tym thn every thing was perfect. Dont take it as a hard steps Just 4 steps nd ull b the ower of 2.3.3 gb Sent from my GT-P1000 using XDA App
19th May 2011, 03:03 AM Thanks Meter 10 Member |OP| Posts: 30 Join Date: Nov 2010 Originally Posted by pprajaa
# 11
This is my folder structure of the rom folder. Am i doing anything wrong. I am new to this so please help me!!!!
Your folder is correct, which version u r usibg of odin ? Use v1.7 only
19th May 2011, 03:04 AM Thanks Meter 10 Member |OP| Posts: 30 Join Date: Nov 2010
# 12
Is phone function present in this rom Sent from my GT-P1000 using XDA App
19th May 2011, 03:06 AM Thanks Meter 10 Member |OP| Posts: 30 Join Date: Nov 2010 Originally Posted by oldmacnut
# 13
I tried this on my CDMA Tab yesterday, took a few hours, got it to boot, hung on samsung logo, i am digging the Samsung boot logo though. No other response, still trying to flash it back to stock verizon, finding stock verizon PIT file was hard, took awhile, it keeps failing, but Ill let it charge back up, try again later. Oh, lol I own 3 Tabs, was doing this to my "bitch" tab. the one I flog with different roms.
19th May 2011, 03:06 AM Thanks Meter 10 Member |OP| Posts: 30 Join Date: Nov 2010
# 14
Uncheck the repartition box Sent from my GT-P1000 using XDA App
19th May 2011, 03:18 AM Thanks Meter 0 Junior Member Posts: 12 Join Date: Aug 2009
# 15
I am using odin 1.7 only. Sent from my GT-P1000 using XDA App
19th May 2011, 03:20 AM Thanks Meter 0 Junior Member Originally Posted by deepx10 Posts: 12 Join Date: Aug 2009
# 16
Uncheck the repartition box Sent from my GT-P1000 using XDA App
19th May 2011, 03:31 AM Thanks Meter 0 Junior Member Posts: 12 Join Date: Aug 2009
# 17
PDA P1000JPJM5 PHONE P1000JXJM2 CSC P1000OJPJM6 Result of *#1234# Sent from my GT-P1000 using XDA App
# 18
I fixed my 'stuck on Samsung logo' error by using this firmware with Chainfires mrPIT file and then his dbdata file. Flashing instructions as per this link http://forum.xda-developers.com/show....php?t=1073854
NOTE: I'm an Android noob so I may have just got lucky - mix these files at your own risk
Posts: 553 Join Date: Feb 2007 Location: Hotels everywhere
Hope this helps someone, and if it does then consider donating to the chefs... __________________
Samsung Galaxy Tab GT-P1000. Gingerbread 2.3.3. HTC TyTN II - OS: PC.Ultimate.V11WWE - Radio 1.70.19.09 - JockyW HardSPL 3.29 Hermes (Vodafone) - O/S: Schaps 4.20 - Radio: 1.48.00.00 - HardSPL: 2.10.Olipro Hermes (Vodafone) - Stock Rom - Stock Radio - Bricked because NOT HARD SPL QTEK 9100 - Stock Rom - Stock Radio - Stolen in France I-Mate K-Jam - Stock Rom - Stock Radio - Stolen in France Kaiser WIKI Hermes WIKI MrVanx's Guide for Hermes
The Following User Says Thank You to ach2 For This Useful Post: Show/Hide 19th May 2011, 07:53 AM Thanks Meter 48 Originally Posted by ach2
# 19
I'm also stuck on the Samsung logo. I've reset a couple of times, and also factory reset. When I factory reset I get an error (in red text): E:format_volume: rfs format failed on /dev/block/stl10
Senior Member
This error happens immediately after: Formatting /dbdata... Any help appreciated - but please be gently 'cos I'm an Android noob
Posts: 195 Join Date: Jul 2010 Location: Sherman, Tx
Guys wait on boot screen, i also waited for 1/2 n hour 1st tym thn every thing was perfect. Dont take it as a hard steps Just 4 steps nd ull b the ower of 2.3.3 gb Sent from my GT-P1000 using XDA App
Keep in mind....Im trying to do this to a CDMA Verizon Tab, NOT I REPEAT NOT a GSM. DO NOT ATTEMPT TO DO WHAT IM DOING. I have 3 tablets, and it is looking like I did a hard brick. __________________ DX~~~Blurrybread GB VZW Galaxy Tab VZW Galaxy Tab HC Port. My guinea pig tab. PM Me for an FTP account on my server to host your Android Projects. Ditch the lame file sharing sites. FREE!
Mirror I am building of Device Roms, Kernals, Recovery, Apps, etc http://www.blackmugmedia.com/Android/ Wiki page I tossed on my server for Android related anything, use it if you like, it's there for everyonehttp://www.blackmugmedia.com/wiki/in...itle=Main_Page
# 20
I have a vodafone euro tab but I got it unlocked for a few bucks.. will this work in my tab??
20th May 2011, 04:54 AM Thanks Meter 10 Member |OP| Posts: 30 Join Date: Nov 2010
# 21
Just go with it, bt not for cdma Sent from my GT-P1000 using XDA App
20th May 2011, 05:51 AM Thanks Meter 0 Junior Member Posts: 2 Join Date: Oct 2008
# 22
I am very much a noob at this, but I have managed to get 2 other ROMs flashed in the past. You all say this is for GSM tabs only, but aren't these baby's all inclusive? Meaning they are capable of CDMA and GSM? I am assuming that you mean if you want to use the CDMA function, do not use this ROM. I bought my Galaxy as a stock Bell (CDMA) tab, and swapped it into a Rogers (GSM) device VERY easily. Side note: I am attempting this flash as I write this, will edit as success happens
20th May 2011, 10:04 AM Thanks Meter 0 Junior Member Posts: 1 Join Date: Jun 2010 Originally Posted by pprajaa
# 23
This is my folder structure of the rom folder. Am i doing anything wrong. I am new to this so please help me!!!!
You need to click on PDA and select the Android firmware tar file.
21st May 2011, 05:20 AM Thanks Meter 0 Junior Member Posts: 8 Join Date: Sep 2007 Originally Posted by ach2
# 24
I fixed my 'stuck on Samsung logo' error by using this firmware with Chainfires mrPIT file and then his dbdata file. Flashing instructions as per this link http://forum.xda-developers.com/show....php?t=1073854
NOTE: I'm an Android noob so I may have just got lucky - mix these files at your own risk
Hope this helps someone, and if it does then consider donating to the chefs...
You save my day. I have the same problem after flashig my tab and i resolved in the same way like you do. Thank you! Sent from my GT-P1000 using XDA App
Last edited by MosCraciun; 21st May 2011 at 05:27 AM.
21st May 2011, 12:58 PM Thanks Meter 0 Junior Member Posts: 3 Join Date: May 2011
# 25
hi guys thought I'd ask this here as well, hope that's OK. I manually updated my Sgt, now I can't get my mms to work. I've deleted and added and rebooted several times to no avail. I've also reset to default the apns but nothing shows up. hope someone here can help me. also, when I try to update my readers hub, it says error code 4002. this is making me more anxious as I read a lot and I have a couple of books that I'm reading from kobo. sent from my galaxy tab using tapatalk
# 26
I have a T-Mobile Galaxy Tab original with network access. i cancelled/ did pay the bill and so now my tab is unregistered. i see there is an update for it but when i hook up to mini kies it only backs up my data will not update. Status shows unregistered and will not perform update. So with that said; can i just root my tab to gain the gingerbread or am i just stuck with 2.2? Thanks
24th May 2011, 09:28 PM Thanks Meter 0 Junior Member Posts: 3 Join Date: May 2011 Can I?
# 27
Android noob here..... kindly bear with me..... Current About phone: Model number GT-P1000 Firmware Version 2.2 Baseband Version P1000DDJJ1 Build Number FROYO.DDJK3 Can I safely proceed to update to 2.3.3 according to the provided instructions? Thankyou for your time
# 28
Hi all, A Brazilian user here, I did get stoke right after install the Rom, the Galaxy did not start up, not even the Samsung logo, then I noted that the home screen buttons was alight. then I reinstalled the rom, but this time the 2.2 from my current operator. Is that possible to install a 2.3 version on my tablet, brazilians galaxy tab are diferent from the other, we have TV build in, also seams that the hardware in general is diferent as well.
A little help here Will be much appreciated. Thank You guy, in advance.
Last edited by andrefilipe90; 25th May 2011 at 05:23 AM.
25th May 2011, 07:47 AM Thanks Meter 2 Member Posts: 49 Join Date: Feb 2009
# 29
The Following User Says Thank You to gralolor For This Useful Post: Show/Hide 25th May 2011, 11:55 AM Thanks Meter 1 Junior Member
# 30
Yes sure...you can....I did it... Now my tab is superfast.... Go ahead bro...
The Following User Says Thank You to kwajage For This Useful Post: Show/Hide Page 3 of 7 Page break by AutoPager. Page( 4 ). Load Pages
25th May 2011, 12:00 PM Thanks Meter 1 Junior Member Originally Posted by Manstanze
# 31
Android noob here..... kindly bear with me..... Current About phone: Model number GT-P1000 Firmware Version 2.2 Baseband Version P1000DDJJ1 Build Number FROYO.DDJK3 Can I safely proceed to update to 2.3.3 according to the provided instructions? Thankyou for your time
Yes sure...you can ...i did it... Now my tab is superfast.... Go Ahead bro....
# 32
Same problem, maybe I have to change a pit file, I cant go forward after the first reset, but I notice that the phones Starts (make the sounds of the Samsung logo comming up) but nothing is showing on the screen (maybe thats a hardware incompatible problem). Any advise? Thank You.
Update! I just find out, that the tablet is in fact booting up, and working, but the screen after I fit this version of the .Tar file is not alighting. Any advise on that one?
Last edited by andrefilipe90; 25th May 2011 at 07:43 PM.
# 33
Let me try to know exactly if Im able, with my current Galaxy to upgrade it to 2.3 Is those Details conpatible with this system? Current About phone: Model number GT-P1000L Firmware Version 2.2 Baseband Version P1000LVJJM9 Build Number FROYO.VJJM9
31st May 2011, 03:58 AM Thanks Meter 0 Junior Member Posts: 3 Join Date: Oct 2007
# 34
In Samsung Galaxy Tab Vodafone Greek Tablet work quick and great. Thanks a lot!!!
31st May 2011, 05:18 AM Thanks Meter 0 Junior Member Posts: 27 Join Date: May 2011
# 35
31st May 2011, 09:11 PM Thanks Meter 10 Member |OP| Posts: 30 Join Date: Nov 2010 Originally Posted by perling
# 36
1st June 2011, 11:48 PM Thanks Meter 0 Junior Member Posts: 1 Join Date: May 2011 Originally Posted by ach2
# 37
I fixed my 'stuck on Samsung logo' error by using this firmware with Chainfires mrPIT file and then his dbdata file. Flashing instructions as per this link http://forum.xda-developers.com/show....php?t=1073854
NOTE: I'm an Android noob so I may have just got lucky - mix these files at your own risk
Hope this helps someone, and if it does then consider donating to the chefs...
Thanks for tip! I had the same flashing Samsung logo problem and got it fixed using the 2 files!
3rd June 2011, 12:07 PM Thanks Meter 0 Junior Member Carrier Posts: 1 Join Date: Feb 2011 Location: Lahore
# 38
im stuck on samsung logo its just glowing, waited for 4 hours but still no boot please help i did exactly as in the detailed procedure
3rd June 2011, 01:07 PM Thanks Meter 10 Member |OP| Posts: 30 Join Date: Nov 2010
# 39
# 40
Me too, Let me try to know exactly if Im able, with my current Galaxy to upgrade it to 2.3 Is those Details conpatible with this system?
Current About phone: T-mobile Model number GT-P1000 Firmware Version 2.2 Baseband Version P1000XXJMA_roto-2G Build Number FROYO.XXJME tks
7th June 2011, 02:54 AM Thanks Meter 0 Junior Member Posts: 3 Join Date: Oct 2007 2.3.3
# 41
After a week with 2.3.3 gingerbread in my Galaxy Tab (p1000) i have to say that my tablet is completely different than before. More fast, accurate, without lag. The applications run smoother and without problems. Thanks again for your guide.
7th June 2011, 07:55 PM Thanks Meter 0 Junior Member Posts: 14 Join Date: Feb 2008
# 42
this thread encouraged me to flash my SGT as the guide is simple. unfortunately, as most of the posters, SGT is hanging in the startup logo. fixed it by following the suggestions here. so in the end.. thanks to all
# 43
Does anybody know if Gingerbread resolves the Tab from dropping wifi connections because it keeps getting stuck on getting an IP address?
8th June 2011, 03:30 AM Thanks Meter 0 Junior Member Posts: 8 Join Date: Sep 2007
# 44
Yes. I have the same problem with 2 diffrent routers in 2 diffrent networks. Sent from my GT-P1000 using XDA App
8th June 2011, 04:34 PM Thanks Meter 0 Junior Member Posts: 16 Join Date: Aug 2007
# 45
I flashed this rom to my tab and it failed now I see picture of mobile and computer and ! mark I cannot enter the recovery or download mode My previous rom was JPJM5 Froyo 2.2 __________________ Samsung i8000 Omnia II Original ROM WM 6.1 Pro CE OS 5.2.21006 (Build 21006.1.5.74)
# 46
After I m follow your instruction, then my TAB stuck in the samsung logo more than 1 hr... i m counting already... Any clue to me ??? __________________ Best Regards
Member
Devy
# 47
Now I m using 2.3.3 now.. Thanks to ach2, i m following your advise. and yes you need more step to reflash it..
I fixed my 'stuck on Samsung logo' error by using this firmware with Chainfires mrPIT file and then his dbdata file. Flashing instructions as per this link http://forum.xda-developers.com/show....php?t=1073854
NOTE: I'm an Android noob so I may have just got lucky - mix these files at your own risk
Hope this helps someone, and if it does then consider donating to the chefs...
10th June 2011, 02:22 AM Thanks Meter 0 Junior Member Posts: 1 Join Date: Jun 2011 Additional Info
# 48
Hello Mate, You gave a very detailed information about upgradation of the Samsung Galaxy Tab P1000 to Gingerbread OS. But one vital information was missing. That the Kies software must be shut down prior to start of update. Because otherwise the port is unavailable to Odin3. Pardon my ignorance, but I tried getting around, before it struck me that I should try shutting down Kies ... Maybe this may help some of the noobs like myself. Thanks for all the details. Best Regards,
Samir
# 49
Dear Friends thanks for the inform,ation. i have done the same as you all done, and my tab goes OK.
the only problem is that the Kies doesnot recognise my "current firmware version" at all. The code *#1234# shows the result as below: PDA PHONE P1000XXJPZ CSC please advise...
Last edited by babak_1274; 11th June 2011 at 02:21 PM.
11th June 2011, 09:57 PM Thanks Meter 0 Junior Member Posts: 3 Join Date: Jun 2011 help me!!
# 50
after i done with odin, it supposed to auto reboot..but i doesn't!help me!,,when i hold the power button,it flash a light (picture below ),, SEE AT ATTACHMENT after i release it,it off..HELP ME PLEASE,,
Attached Thumbnails
# 51
after i done with odin, it supposed to auto reboot..but i doesn't!help me!,,when i hold the power button,it flash a light (picture below ),,
Senior Member Posts: 269 Join Date: Jan 2011
When you plug the ac adaptor does it display the battery? If so then try to recharge for a while. Then go to download mode again and flash the dbdata. after this it should reboot ok. __________________ Galaxy Tab P1000 GINGERBREAD OFFICIAL ASIAN EDITION
12th June 2011, 06:18 PM Thanks Meter 0 Junior Member Posts: 3 Join Date: Jun 2011 Originally Posted by bongski55
# 52
When you plug the ac adaptor does it display the battery? If so then try to recharge for a while. Then go to download mode again and flash the dbdata. after this it should reboot ok.
13th June 2011, 07:26 PM Thanks Meter 0 Junior Member Will it work with the following?
# 53
Dears, Was wondering did anyone try with below ROM and will it work?
PDA: P1000JPJM5 PHONE: P1000JXJM2 CSC P1000OJPJM6 Thx, __________________ Hermes: Rom Josh V15, Rom Date: 01/08/09, Radio: 1.47.30.10 Polaris: Rom: c_shekar 1.60.21014aCS WWE Rom 09-01-09 Radio: 1.58.25.14
13th June 2011, 09:50 PM Thanks Meter 1 Junior Member Posts: 2 Join Date: Mar 2011 Originally Posted by z.iman
# 54
The Following User Says Thank You to galuhp For This Useful Post: Show/Hide 15th June 2011, 09:06 AM Thanks Meter 0
# 55
Maybe you can try following the instruction again from the start... ? __________________ Best Regards Devy
Member
15th June 2011, 04:31 PM Thanks Meter 0 Junior Member Posts: 3 Join Date: Jun 2011
# 56
arghh.. hmm.. the warranty is not void , right? i think, best way is , give to Samsung Service Center.. arghh
# 57
Dears, Was wondering did anyone try with below ROM and will it work? PDA: P1000JPJM5 PHONE: P1000JXJM2 CSC P1000OJPJM6 Thx,
That is the latest Arabic froyo build. Yes you can upgrade to JQ1. just be sure to unsign bootloaders with chainfire patch and root using superoneclickroot first before upgrade. Use Chainfire's method here in the forum,use search don't ask for procedures as it is all on the thread already,no need to repeat here.... Good luck __________________ Galaxy Tab P1000 GINGERBREAD OFFICIAL ASIAN EDITION
15th June 2011, 05:50 PM Thanks Meter 0 Junior Member Posts: 1 Join Date: Jun 2011
# 58
Hi to all, I did everything step by step twice, but my galaxy P1000L screen is always black. My buttons light up, my computer recognize the tab, but then nothing else happens... also tried the other guide in this site, same problem. Please help me with this, I don't know what to do. Thankss!
15th June 2011, 06:10 PM Thanks Meter 1 Junior Member Posts: 3 Join Date: Apr 2011
# 59
Hi to all, I did everything step by step twice, but my galaxy P1000L screen is always black. My buttons light up, my computer recognize the tab, but then nothing else happens... also tried the other guide in this site, same problem. Please help me with this, I don't know what to do. Thankss!
This version of gingerbread rom was not meant for your tablet, This is for generic P1000 tabs and not P1000N/L (latin versions). I guess your boot loader is messed up; however your tab is still recoverable Check this thread by humberos http://forum.xda-developers.com/showthread.php?t=918722 _vDi_
16th June 2011, 01:46 AM Thanks Meter 0 Junior Member Posts: 11 Join Date: Jun 2011 Originally Posted by foxstam
# 60
In Samsung Galaxy Tab Vodafone Greek Tablet work quick and great. Thanks a lot!!!
Hi...mate, is your Samsung galaxy tab same as mine; My Tab details (Australia vodafone) GT-P1000 Firmware: 2.2 Baseband Version: P1000XXJID Kernel: 2.6.32.9 root@SE-S611 #1 Build Number: FROYO.XWJJ4 I want to if I can flash this gingerbread updates, after I have root my tab.
25th June 2011, 07:35 AM Thanks Meter 0 Junior Member Posts: 6 Join Date: May 2011
# 61
Will this work for Sprint SPH P100 build DJ30 firmware version 2.2
25th June 2011, 09:57 AM Thanks Meter 0 Junior Member Posts: 3 Join Date: Nov 2008
# 62
Worked great for me, thank you very much! GT-P1000, Baseband P1000XXJPZ Now I'll start enjoying. I wonder why, the heck, Samsung has to do this to us, our loyal customers, and make us look for device hacking instead of using the legit ways. It's fun, but still...
# 63
Worked great for me, thank you very much! GT-P1000, Baseband P1000XXJPZ Now I'll start enjoying. I wonder why, the heck, Samsung has to do this to us, our loyal customers, and make us look for device hacking instead of using the legit ways. It's fun, but still...
Because Samsung does not get anything in return-Samsung is first and foremost a business. On the other hand Apple controls the Apps market so it benefits from updating its OS. That is the drawback of open source. But we must be thankful that there are free and legal work around to the problem. Nobody will get sued for installing a ROM or applying root.... __________________ Galaxy Tab P1000 GINGERBREAD OFFICIAL ASIAN EDITION
26th June 2011, 01:27 AM Thanks Meter 0 Junior Member Posts: 8 Join Date: Jan 2011
# 64
Pls i have GT-p1000 baseband JXJM2 just want to know if it is posible to upgrade it manualy as well. Thanks Sent from my GT-P1000 using XDA App
26th June 2011, 01:43 AM Thanks Meter 0 Junior Member Posts: 8 Join Date: Jan 2011
# 65
Pls is posible to upgrade thismanualy Model number GT-P1000 Firmware Version 2.2 Baseband Version P1000JXJM2 Build number FROYO.JPJM5 Sent from my GT-P1000 using XDA App
# 66
Pls is posible to upgrade thismanualy Model number GT-P1000 Firmware Version 2.2 Baseband Version P1000JXJM2 Build number FROYO.JPJM5 Sent from my GT-P1000 using XDA App
Looks like arabic froyo. Yes it can be upgraded/flashed manually. You have to root then patch the bootloader first. Sent from my GT-P1000 using Tapatalk __________________ Galaxy Tab P1000 GINGERBREAD OFFICIAL ASIAN EDITION
# 67
Hey guys... I have a Model Number SGH-T849 Firmware 2.2 Baseband Version T849UVJJB Build Number FROYO.UVJJB Will it work on mine? Its a TMobile US
Page 7 of 7
None
Quick Reply
Message:
post new threads post replies post attachments edit your posts
BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules
Follow us on Twitter - Contact Us - Have an iPhone? XDA-Developers Home - Members List - View Forum Leaders - Legacy Devices - Top