Sunteți pe pagina 1din 9

IP Addresses Torn Apart

Every system connected to the Internet or connected to a particular network has a unique Internet Protocol
Address of an IP Address. Just as in the real world every person has his or her own Home Contact Address,
similarly every system connected to the Internet has its own unique IP Address. Your IP Address is the
address to which data should be sent to ensure that it reaches your system. The IP Address of a system acts
as the system’s unique identity on the net.

One of my earlier manuals described an IP Address in the following words: ‘….Like in the real world
everyone has got an individual Home Address or telephone number so that, that particular individual can be
contacted on that number or address, similarly all computers connected to the Internet are given a unique
Internet Protocol or IP address which can be used to contact that particular computer…..’

Now, that you know what exactly an IP Address is, let us move on to the structure of IP Addresses.

An Internet Address (IP Address) is a 32-bit address or number, which is normally written as four decimal
numbers (of 8 bits each) , each separated from the other by a decimal.. This standard is known as the
dotted-decimal notation.

Example: A Typical IP Address would be as follows: 202.34.12.23


It can be further broken down as:
203 representing the first 8-bits.
34 representing the next 8-bits.
12 representing the third 8-bits.
23 representing the fourth 8-bits.

Thus when considered together 202.34.12.23 represents 32-bits. So basically we can conclude that each
decimal in an IP Address represents 1 byte or 8 bits. It is important to note than an IP Address can contain
numbers from 0-255.

There are a huge number of IP Addresses in use in the present day wired age. All these IP Addresses have
some sort of relation with each other and each individual IP Address can reveal a lot of secrets about the
Network, of which it is a part. Before we move on to that, we need to understand the fact that all IP
Addresses being used are divided into a number of ranges, which are as follows:

Class Range
A 0.0.0.0 to 127.255.255.255
B 128.0.0.0 to 191.255.255.255
C 192.0.0.0 to 223.255.255.255
D 224.0.0.0 to 239.255.255.255
E 240.0.0.0 to 247.255.255.255

So, we can easily conclude that one can find out the Class to which an IP Address belongs to simply by
comparing the numeral before the first decimal of the IP Address with the above table.

For Example: In The IP Address 203.43.21.12, the number before the first decimal is 203 and the above
table tells us that it belongs to Class C of the range of IP addresses.

The various IP Addresses are divided into the different classes on the basis of the structure of their Network
or in other words on the basis of what the various numbers separated by decimals actually stand for. To
understand this, let us refer to the following:

Class Information
A It has the first 8-Bits for Netid and the last 24-bits for Hostid
B It has the first 16-Bits for Netid and the last 16-bits for Hostid
C It has the first 24-Bits for Netid and the last 8-bits for Hostid
D It represents a 32-bit multicast Group ID.
E Currently not being used.

The above table will be clearer after reading the following examples:

Examples:

An IP Address 203.45.12.34 belonging to Class A means that the network ID is 203 and the host ID is
45.12.34

If the Same IP Address belonged to Class B, then the network ID would become 203.45 and the host ID
would become 12.34

And if it belonged to Class C then the network ID would become 203.45.12 and the host ID would become
34.

Almost all ISP’s prefer to use a Class B Network. If that is the case then each time you login to your ISP,
then the first 2 octets of your IP Address would not change, while the last two are likely to change.
However, even if only the last octet changes, and the remaining three remain constant, it is likely that the
ISP uses Class B addressing. (Subnetting comes in. Explained later in the manual)

*****************
HACKING TRUTH: How do you find out the IP Address of your own system? In order to get your own
IP Address all you have do is, follow the below process:

Connect to the Internet.


Launch MSDOS.
Type: netstat –n at the prompt.

You will get an output similar to the below:

C:\WINDOWS>netstat -n

Active Connections

Proto Local Address Foreign Address State


TCP 203.94.253.183:1025 64.4.13.56:1863 ESTABLISHED
TCP 203.94.253.183:1031 209.143.242.119:80 ESTABLISHED

The IP Address shown under the Local Address Field denotes the IP address of your system.
*****************

An IP Address, which belongs to the Class-A addressing system having a network ID equal to 127, is
referred to as the special address. It is actually known as the Loopback Interface. It allows clients and
servers on the same system to communicate with each other.

The loopback address, which is commonly used, is 127.0.0.1. Almost all systems have also given the
loopback address the special name ‘localhost’.

Till now we learnt that an IP Address is a decimal notation of a computer’s address in the wired world.
However, the address of a computer does not have to necessarily be in the decimal notation form. We will
learn about the various forms of an IP Address in the following section.

An IP Address does not necessarily have to be represented in the dotted decimal form. There is more than a
single way in which one can represent an IP Address. Some of there are as follows-:
1. Decimal System: If an IP Address is being represented in the Decimal system, then it means that
it is being represented in the Base 10 system. The normal IP Addresses are represented in the
Decimal System. Example: 216.115.108.245

2. Domain Name System: If an IP Address is being represented in the form of human recognizable
characters and names then it is said to be in the form of DNS system. Example: www.yahoo.com

3. DWORD Format: DWORD is short for double word. It basically consists of two binary
"words" (or lengths) of 16 bits. However, it is almost always represented in the decimal number
system i.e. having a base 10. Example: D8736CF5, which when represented in the form of a
decimal number system with a Base 10 becomes 3631443189

4. Octal System: If an IP Address is represented in the octal system, then it means that it is being
represented in the Base 8. Example: 33034666365

5. Hexadecimal System: If an IP Address is represented in the Hexadecimal System, then it is


actually being represented in the Base 16 system.

6. A Cross Breed: If an IP Address is being represented in the mixture of any of the above two
systems, then it is said to be a Cross Breed.

All the examples portrayed above are some form or the other of the same address of the same system. What
I mean to say by this is that typing any of the following in your browser will take you to the same site:
http://www.yahoo.com/ , 3631443189, 33034666365 and 216.115.108.245. The Binary form of this
address, which is 11011000011100110110110011110101 may also work with certain applications.

NOTE: Please note that not all of the above work in all browsers. And if you or your ISP has a Proxy or a
firewall installed then some of the above may not work. The author does not hold any responsibility for
failure of working on any of the above.

Now, that you have seen the various forms in which an IP Address can be represented let us move on to as
to how one can convert the domain name into the above different forms.

To understand how the conversion works, let us take http://www.yahoo.com/ as the example domain. The
first step in our quest to represent http://www.yahoo.com/ in various forms of IP’s is to get its normal
decimal-dotted IP Address. One can easily get the IP Address of a domain by various methods like
WHOIS, netstat, ping, traceroute etc.

In this manual, I have used ping to get the IP:

C:\WINDOWS>ping yahoo.com

Pinging yahoo.com [216.115.108.245] with 32 bytes of data:

Request timed out.


Request timed out.
Request timed out.
Request timed out.

The above screenshot clearly shows that the IP Address of our example target system is 216.115.108.245.
Now that we have the IP Address, let us move on to converting it into other forms.
In order to convert a decimal dotted IP Address into its DWORD equivalent, one has to consider each
number separated from the other number by a decimal separately. So, in effect, 216.115.108.245 is broken
down into:

216.115.108.245=

216
115
108
245

Now, first one has to convert the above decimals into their hexadecimal equivalents. This can easily be
done by referring to the below Decimal into Hexadecimal chart (or vis-a-versa):

0 1 2 3 4 5 6 7 8 9 A B C D E F.
0 000 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015
1 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031
2 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047
3 048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063
4 064 065 066 067 068 069 070 071 072 073 074 075 076 077 078 079
5 080 081 082 083 084 085 086 087 088 089 090 091 092 093 094 095
6 096 097 098 099 100 101 102 103 104 105 106 107 108 109 110 111
7 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127
8 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143
9 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159
A 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175
B 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191
C 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207
D 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223
E 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239
F 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255

Thus we get:

216=D8
115=73
108=6C
245=F5

As a result, 216.115.108.245 = D8736CF5

It is important to note that D8736CF5 is the Hex equivalent of our IP and would always be a eight character
long representation, however, as a DWORD value is represented in the base-10 system, we also need to
convert in into the Decimal form. In order to do so, we need to follow the below process:

1. Click on Start > Programs > Accessories > Calculator.


2. Click on View > Scientific
3. Now, select ‘Hex’ from the right top corner and type in D8736CF5 in the field.
4. Then click on Dec (Decimal). You will find that the value that you typed in would have changed
to: 3631443189.

Thus you now have the DWORD value represented in the Base-10 system. Typing http://www.yahoo.com/
or 3631443189 or 216.115.108.245 in your browser would all take you to the same site.
For all those of you to whom the above process seems to be extremely cumbersome, the following Perl
Script too would do the same process less the calculations:
_____________________________

#!/usr/bin/perl
# By Ben H. Originally by neeko.
# Usage: dword.pl [ -q | --quiet ] host/ip
#

use Socket; # for gethostbyname()


use Math::BigInt; # so it fits..
my $quiet, $host, @ip; # get some vars started.

if ( $#ARGV < 0 ) {
print "$0";
print "Usage: $0 [-q | --quiet] host \n";
exit;
}
if ( $ARGV[0] =~ /-q|--quiet/ ) {
$quiet=1;
$name = $ARGV[1];
}
else {
$name = $ARGV[0];
}
@host = gethostbyname( $name ); # get the ip, if a hostname is used
$foo = $host[4];

# This parses the result of the gethostbyname into numbers

for $n (1..4) {
$ip[$n] = ord( substr( $foo , ($n-1) , 1 ) );
}
if ($quiet != 1) {
print "$name = $ip[1].$ip[2].$ip[3].$ip[4] = ";
}
for $n (1..4) {
$ip[$n] = ( $ip[$n] * ( 2 ** ( ( 3 - ($n-1)) * 8 ) ) );
}
print ($ip[1] + $ip[2] + $ip[3] + $ip[4]);
print "\n";
exit;
____________________________

*******************
HACKING TRUTH: One can arrive at the DWORD in the base-10 value by the following mathematical
formula too:

IP Address= 216.115.108.245 (Found out Above)


Value of DWORD in Base-10 system: 3631443189 (Calculated)

216 * (256)3 = 216 * 16777216 = 3623878656


115 * (256)2 = 115 * 65536 = 7536640
108 * (256)1 = 108 * 256 = 27648
245 * (256)0 = 245 * 1 = 245
Adding the last column we get: 3631443189, which is equal to the DWORD value that we calculated
earlier.
*****************

Without closing the Windows Calculator, one can get the various other forms of the same IP Address
(216.115.108.245) by simply selecting the corresponding number system.

To get the Binary form of the IP Address, one needs to follow the below process:

1. Click on Start > Programs > Accessories > Calculator.


2. Click on View > Scientific.
3. Now, select ‘Hex’ from the right top corner and type in D8736CF5 in the field.
4. Then click on Bin (Binary). You will find that the value that you typed in would have changed to:
11011000011100110110110011110101.

Please note that most browsers do not accept IP Addresses in Binary. The only way to use them would be
by converting them to their Decimal form, which would actually be nothing but the DWORD form
represented in the base-10 system.

To get the Binary form of the IP Address (216.115.108.245), one needs to follow the below process:

1. Click on Start > Programs > Accessories > Calculator.


2. Click on View > Scientific.
3. Now, select ‘Dec’ and type in the first part of the IP Address i.e. 216.
4. Now, select ‘Oct’, this will give you the Octal equivalent (i.e. 324) of the first part of the IP
Address.
5. Note this down somewhere and follow the process for all parts of the IP Address.

Thus 216.115.108.245, would become:

216= 330
115=163
108=154
245=365

Now, when you type the Octal equivalent of the IP Address in your browser then you have preeceed each
field with a ‘0’. Thus in our example:

http://216.115.108.245 becomes http://0330.0163.0154.0365/

One could also have used the below chart for the conversion process:

0 1 2 3 4 5 6 7 8 9 A B C D E F.
0 000 001 002 003 004 005 006 007 010 011 012 013 014 015 016 017
1 020 021 022 023 024 025 026 027 030 031 032 033 034 035 036 037
2 040 041 042 043 044 045 046 047 050 051 052 053 054 055 056 057
3 060 061 062 063 064 065 066 067 070 071 072 073 074 075 076 077
4 100 101 102 103 104 105 106 107 110 111 112 113 114 115 116 117
5 120 121 122 123 134 125 126 127 130 131 132 133 134 135 136 137
6 140 141 142 143 144 145 146 147 150 151 152 153 154 155 156 157
7 160 161 162 163 164 165 166 167 170 171 172 173 174 175 176 177
8 200 201 202 203 204 205 206 207 210 211 212 213 214 215 216 217
9 220 221 222 223 224 225 226 227 230 231 232 233 234 235 236 237
A 240 241 242 243 244 245 246 247 250 251 252 253 254 255 256 257
B 260 261 262 263 264 265 266 267 270 271 272 273 274 275 276 277
C 300 301 302 303 304 305 306 307 310 311 312 313 314 315 316 317
D 320 321 322 323 324 325 326 327 330 331 332 333 334 335 336 337
E 340 341 342 343 344 345 346 347 350 351 352 353 354 355 356 357
F 360 361 362 363 364 365 366 367 370 371 372 373 374 375 376 377

********************
HACKING TRUTH: In an Octal IP Address there can be any number of zeros preceding the numbers,
without resulting in a change in the address of the remote system.
This means that http://0330.0163.0154.0365/ can also be written as http://000330.000163.000154.000365/
*******************

Typing http://www.yahoo.com/ or 3631443189 or 216.115.108.245 or http://0330.0163.0154.0365/ in your


browser would all take you to the same site.

One could also represent an IP address in its Hexadecimal form. Remember the Hex value that we obtained
while converting 216.115.108.245 into its DWORD equivalent? Well, in this case we make use of that same
value. We had calculated that:

216.115.108.245 = D8736CF5

Now, when we write an IP Address in Hexadecimal form, then we do so by writing the following
(Preceding each value with a ‘0x’ which denotes that the following value is in Hexadecimal):

http://0xd8.0x73.0x6c.0xf5/

The above could also be written as: http://0xd8736cf5/

Note: Most versions of Netscape do not Support Hexadecimal IP Addresses.

Thus, typing http://www.yahoo.com/ or 3631443189 or 216.115.108.245 or http://0330.0163.0154.0365/ or


http://0xd8.0x73.0x6c.0xf5/ or http://0xd8736cf5/ in your browser would all take you to the same site.

You can create a cross breed by combining any one or more of the above formats. However, one has to
keep in mind the browser compatibility while doing so.

Obtaining the IP Address of other systems

The most common method of getting the IP Address of other systems, is through Instant Messaging
Software like ICQ, MSN Messenger, Yahoo Messenger, AIM etc. In this manual we briefly discuss them
all.

I Seek You or ICQ is one of the most popular chatting software around. With it not only comes easy
pastime, but also security concerns. ICQ has an inbuilt IP Address Hider, which when enabled is
supposedly able to hide your IP from the users you are chatting with. However, like most IP Hiding
software, this too is nowhere near good. You can find out the IP Address of any ICQ user, even if IP Hiding
has been enabled, by following the below process.

1.) Launch MSDOS and type Netstat –n to get a list of already open ports and the IP’s of the
machines with which a connection has been established. Note down this list somewhere.
2.) Now, launch ICQ and send a message to the victim.
3.) While you are still chatting, go back to DOS and again give the Netstat –n command. You will
find that a new IP signifying a new connection. This would be the IP Address of the victim.

This method of obtaining the IP Address of the person with whom you are chatting to is quite common.
However, it works only with ICQ and other select Instant Messengers. It certainly does not work with MSN
Messenger and Yahoo Messenger etc. The main reason behind this is the difference in the working of ICQ
and MSN Messenger.

Let us assume that your IP Address is xx.xx.xx.xx and your friend’s IP Address is yy.yy.yy.yy

Case I (ICQ):

Whenever you start a chat session with your friend in ICQ a direct connection between you and your friend
is opened by the ICQ software with the help of the ICQ server. Thus all messages that you type are sent in
the following manner:

xx.xx.xx.xx ------------------à yy.yy.yy.yy


(you) (friend)

And all the messages that your friend types, reach you in the following manner:

yy.yy.yy.yy-----------------à xx.xx.xx.xx
(friend) (you)

Thus a direct connection has been established between your system (xx.xx.xx.xx) and your friend’s system
(yy.yy.yy.yy) As a result when you give the netstat –n command, you can obtain his IP Address.

Case II (MSN Messenger):

Whenever you start a chat session with your friend in MSN Messenger an indirect connection between you
and your friend is opened via the MSN Server. Thus all messages that you type first go the MSN server
which then forwards them to your friend and vis-a-versa. Communication takes place in the following
manner:

xx.xx.xx.xx ------------------à MSN Server---------------àyy.yy.yy.yy


(you) (friend)

And all the messages that your friend types, reach you in the following manner:

yy.yy.yy.yy-----------------àMSN Server-----------------à xx.xx.xx.xx


(friend) (you)

Thus as an indirect connection has been established between your system (xx.xx.xx.xx) and your friend’s
system (yy.yy.yy.yy) giving the netstat –n command does not give you your friend’s IP, but instead displays
the IP address of the MSN server.

The same is the case for Yahoo Messenger and also some other Messaging Software.

However, even such utilities are vulnerable to giving away the IP Address of the target system on issuing
the Netstat –n command. All one has to do is (Please note that I am using MSN Messenger as an example) :

1. Get the victim to come online.


2. Then use the inbuilt File Transfer Facility to send a file to the victim.
3. When he accepts the file transfer and the transfer starts launch MSDOS and give the netstat –n
command. This will reveal his IP because when files are being transferred, a direct connection
exists between you and the victim. That is, there is no mediator MSN Server between you and the
victim.

The same will work if you send a Request for a Call and the victim accepts it.
Besides Instant Messengers, there are some others ways in which one can get someone else’s IP Address.
Say you have a site and want to get the IP Addresses of all the people who visit your site then the following
script can be modified to create a file which records them all:

<HTML>
<BODY>
<SCRIPT>
var ip = new java.net.InetAddress.getLocalHost();
var ipStr = new java.lang.String(ip);
document.writeln(ipStr.substring(ipStr.indexOf("/")+1));
</SCRIPT>
</body>
</HTML>

With that we come to the end of the first edition of the IP Addresses Torn Apart manual. In the next edition
we will go deeper into the secrets of IP Addresses and their structures and workings. Hope you liked this
manual and do send in your comments. Thanks and till next time, take care.

S-ar putea să vă placă și