Documente Academic
Documente Profesional
Documente Cultură
Welcome summer with these delicate earrings. Each colored crystal reflects the many facets of the season . . . from lush greens and pretty floral pinks in June, reds and blues for the Fourth of July, and dusky purples seen in August skies before ushering in autumn.
2"
26-gauge fine silver wire, 6' 22-gauge 3.3mm ID sterling jump rings, 2
All photos courtesy of FusionBeads.com
22-gauge 4.8mm ID sterling jump rings, 2 40mm x 28mm sterling flat teardrop components, 2 3mm fuchsia CrYStALLIzED-Swarovski Elements crystal bicones, 2 3mm blue zircon CrYStALLIzED- Swarovski Elements crystal bicones, 2 3mm topaz CrYStALLIzED- Swarovski Elements crystal bicones, 2 3mm Indian pink AB CrYStALLIzED- Swarovski Elements crystal bicones, 2 4mm olivine CrYStALLIzED- Swarovski Elements
Copyright Interweave Press LLC. Not to be reprinted. All rights reserved.
Summer Cheer originally published in Step by Step Wire, Online 2010. Interweave Press, LLC Not to be reprinted. All rights reserved
publishers of Step by Step Wire magazine join the online beading community at JewelryMakingDaily.com
Summer Cheer
crystal round beads, 4 4mm blue zircon CrYStALLIzED- Swarovski Elements crystal round beads, 2 4mm Indian red CrYStALLIzED- Swarovski Elements crystal round beads, 2 4mm lime CrYStALLIzED- Swarovski Elements crystal round beads, 2 4mm Indian pink CrYStALLIzED- Swarovski Elements crystal round beads, 4 6mm amethyst CrYStALLIzED- Swarovski Elements crystal graphic cube, 4 9mm x 6mm Indicolite CrYStALLIzEDSwarovski Elements crystal drop beads, 2 20mm sterling flat earwires, 2 3. Add a 4mm lime round bead, and anchor the wire by wrapping it around the component twice. the bead should rest on the lip of the inside of the component. the bead should rest on the lip of the inside of the component.
tOOLS:
Chain nose pliers Flush cutters
tEChNIqUES
Wirework
CrEAtE
1. Anchor a 3' length of wire to the right side of a teardrop component by wrapping it around the component twice.
4. repeat in the same manner, adding a 6mm amethyst crystal graphic cube bead, and anchor it. then add a 4mm Indian pink crystal round bead, and anchor it to the component.
2. Add an Indicolite crystal drop bead, and anchor the wire by wrapping it around the component twice.
Summer Cheer originally published in Step by Step Wire, Online 2010. Interweave Press, LLC Not to be reprinted. All rights reserved
publishers of Step by Step Wire magazine join the online beading community at JewelryMakingDaily.com
Summer Cheer
5. Add a 3mm fuchsia crystal bicone to the wire.
6. Begin adding beads in the opposite direction. thread the wire through the loop created from the 4mm fuchsia bead in the previous row.
9. Add a 4mm olivine crystal round bead and a 3mm Indian pink crystal bicone, and thread the wire through the loop created from the 4mm lime crystal round bead. Pull the wire taut.
10. Add a 4mm Indian red crystal round bead, a 3mm topaz crystal bicone, and a 4mm Indian pink crystal round bead, and anchor the wire around the component by wrapping it around twice.
8. Add a 4mm blue zircon crystal round bead, and thread the wire through the loop created from the 6mm amethyst crystal graphic cube. Pull the wire taut.
11. Add a 6mm amethyst crystal graphic cube bead to the wire.
Summer Cheer originally published in Step by Step Wire, Online 2010. Interweave Press, LLC Not to be reprinted. All rights reserved
publishers of Step by Step Wire magazine join the online beading community at JewelryMakingDaily.com
Summer Cheer
14. Add a 4mm olivine crystal round bead, and pull the wire around the 6mm amethyst crystal graphic cube. Anchor the wire to the component by wrapping it around twice.
12. Begin adding beads in the opposite direction. thread the wire through the loop created form the beads in Step 10, putting the wire between the 4mm Indian red bead and the 3mm topaz bead. Pull the wire taut. 15. Cover the component by wrapping the wire tightly around the component.
13. Add a 3mm blue zircon crystal bicone, and thread the wire through the loop created form the 6mm amethyst crystal graphic cube from Step 12. Pull the wire taut.
16. Continue wrapping the component completely with the rest of the wire. trim both ends of the wire closely to the component.
Summer Cheer originally published in Step by Step Wire, Online 2010. Interweave Press, LLC Not to be reprinted. All rights reserved
publishers of Step by Step Wire magazine join the online beading community at JewelryMakingDaily.com
Summer Cheer
17. Add a 4.8mm jump ring to the top of the component, and close.
LOOKING FOR
18. Use the 3.3mm jump ring to attach the jump ring in the last step to the earwire, and close.
repeat Steps 1-18 for the other earring. r ReSouRceS: All beads and findings from FusionBeads.com
interweave.com/go/bdsw
Summer Cheer originally published in Step by Step Wire, Online 2010. Interweave Press, LLC Not to be reprinted. All rights reserved
publishers of Step by Step Wire magazine join the online beading community at JewelryMakingDaily.com