Documente Academic
Documente Profesional
Documente Cultură
Installation Procedure
Version 1.0
3 July 2006
7/24/2006 1
Information about this document
7/24/2006 2
Table of Content
1. Objectives .................................................................................................................................... 4
1.1 Objective of this document .................................................................................................... 4
1.2 Objectives of the documented procedure .............................................................................. 4
1.3 Intended audience ................................................................................................................. 4
1.4 Assumptions ........................................................................................................................... 4
1.5 Conditions required to use the procedure.............................................................................. 4
1.6 Potential limitations................................................................................................................ 5
2. Windows 2K3 Installation, Domain controller, DNS, DHCP, Configuration................................. 6
2.1. Windows 2003 Server Standard Edition Pre-installation ................................................ 6
2.2. RAID 1- Mirror Configuration.......................................................................................... 6
2.3. Promote machine to Domain Controller ......................................................................... 9
2.4. DNS server installation and configuration .................................................................... 14
2.4.1. Installing the DNS server service ................................................................................. 14
2.4.2. Configuring the DNS server .......................................................................................... 17
2.4.3. Create the Forward Lookup zone ................................................................................. 18
2.4.4. Create Reverse lookup zone ......................................................................................... 20
2.5. DHCP installation and configuration ............................................................................. 23
2.5.1. Install DHCP server....................................................................................................... 23
2.5.2. Authorizing the DHCP server ........................................................................................ 25
2.5.3. Creating the DHCP Scope ............................................................................................. 27
7/24/2006 3
1. Objectives
X236 Installation procedure provides steps to setup 1st Domain Controller server, including:
All trained professional who will have to install Windows 2003, DNS, and DHCP Server in RFC
environment.
1.4 Assumptions
Procedure is defined assuming that Windows 2003 installation under xSeries 236
configuration.
7/24/2006 4
1.6 Potential limitations
This is documentation is only applable to RFC; Pictures in the section “Windows 2003
Standard Edition Pre-Installation” unable to captured in the Linux Environment.
However, the section Windows 2003 Server Standard Edition Pre-installation shows with
detail as most as possible.
7/24/2006 5
2. Windows 2K3 Installation, Domain controller, DNS,
DHCP, Configuration
1. Power on the server, Insert the Server Guide CD 7.x into the CD-ROM.
2. Wait until Server Guide screen below appears, Select languge English .
4. Choose Keyboard Layout and Country -> United States, then click Next.
7. On the Select your NOS version, choose the Windows 2003 Standard version,
click Next.
8. On the Server Configuration tasks, Click Next to set Date and Time.
9. On the Date and Time selection, we set current date and time, then click Next.
10. On the Clear All hard disk drives, select Clear all hard disk drive and restore server
RAID to default, then Click Next.
11. The Clear all hard disk drives screen appear, Wait 2 minutes.
12. After all hard disk drives partition have been removed, Click Next.
13. In the server Configuration tasks show we pass 2 step, the next step is to update Serve
Raid firmware, On this screen click Next to update.
7/24/2006 6
14. In the update firmware process, does not turn off the server.
15. After update firmware process is completed, The Server Guide will shutdown and restart
the server automatically.
16. After server shutdown and restart, the server RAID Manager shows steps have been
done and next step.
18. In the Serve RAID Manager Configuration Path, We select Custom configuration for
controller 1 and tick on option Automatically initialize new logical drives, then click
Next.
19. In the Configuration RAID screen, On the left window shows available hard disk to
configure RAID.
20. High light the available disk on the top, Click button Choose available disks to
configure RAID 1 Mirror, click >>, then click Next.
21. After add 2 disks, we have 2 new online as in picture, Click Next.
22. On this Screen, we see Logical drive, RAID Level, Click Next to continue…
23. New Logical drive has been created, Size 70,006 MB on Array A, Click Next.
IP ADDRESS: 192.168.1.2
Subnet Mask: 255.255.255.0
7/24/2006 7
Defualt gateway: 192.168.1.3
DNS server: 192.168.1.2
Click Next.
38. Windows Installation specify where is device driver of devices, click Next.
40. Insert Windows CD 2003 Standard Edition or Enterprise Edition, click Next.
42. Waiting for copying Windows installation files, after copped, Remove CD-ROM drive. The
Server will be restarted and Setup Windows Operating System automatically.
43. After Server restart completely, the Windows server is installed ready. Go to 1.3 to
continue next step.
7/24/2006 8
2.3. Promote machine to Domain Controller
In this section, the server will be configured as the first domain controller in domain RFC.
• DNS Domain name: RFC.COM.VN
• Netbios Domain Name: RFC
• Database and log file locate in: C:\Windows\ntds
• Shared system volume: c:\windows\sysvol
• Restore Mode Password: rfcdc01
7/24/2006 9
Click Next on the Welcome to the
Active Directory Installation Wizard
page.
7/24/2006 10
On the Create New Domain page,
select the Domain in a new forest
option and click Next.
7/24/2006 11
Accept the default settings on the
Database and Log Folders page and
click Next.
7/24/2006 12
On the Permissions page, select the
Permissions compatible only with
Windows 2000 or Windows Server
2003 operating system option. Click
Next.
Click Next.
7/24/2006 13
The Active Directory installation Wizard is
starting to configure itself as a domain
controller.
In this section, we will add network components, installation and configuration our Domain
controller as DNS server.
7/24/2006 14
Click Start, point to Control Panel. Click
Add or Remove Programs.
7/24/2006 15
In the Networking Services dialog box,
put a check mark in the Domain Name
System (DNS) check box and click OK.
7/24/2006 16
2.4.2. Configuring the DNS server
Note :
210.245.31.10
210.245.31.130
7/24/2006 17
2.4.3. Create the Forward Lookup zone
7/24/2006 18
Select To all domain controller in the
Active Directory domain RFC.com.vn,
then click Next.
7/24/2006 19
Click Finish on the Completing the
New Zone Wizard page to completely
configuration Forward lookup zone.
7/24/2006 20
Click Next on the Welcome to the
New Zone Wizard page.
7/24/2006 21
Type Network ID is 192.168.1 in the
Network ID text box. Click Next.
7/24/2006 22
2.5. DHCP installation and configuration
In this section, we will add network components, installation and configuration our Domain
controller as DHCP server.
DHCP server provide to clients ip address detail as below:
7/24/2006 23
Click Add/Remove Window
components.
7/24/2006 24
Wait for the complete installation.
7/24/2006 25
Click Start. Go to Programs,
Administrative Tools and select DHCP.
7/24/2006 26
The DHCP server is Authorized.
7/24/2006 27
On the Scope Name page, enter a name
for the scope in the Name text box and
enter an optional description in the
Description text box.
Click Next.
Note:
Start IP address: 192.168.1.10
End IP address: 192.168.1.254
Click Next.
7/24/2006 28
Accept the default lease duration of 8
Days on the Lease Duration page.
Click Next.
7/24/2006 29
On the Domain Name and DNS
Servers page, enter the domain name
used on the internal network in the
Parent domain text box. In the IP
address text box, enter the IP address of
the DNS server on the internal network.
Click Add then click Next.
Note:
IP Address: 192.168.1.2
7/24/2006 30
7/24/2006 31